Swing Hangers | McMaster-Carr

Filter by

Product Family

Beam Clamps

Eye Nuts

Pipe Hangers

Threaded Rod Hanger Beams

System of Measurement

Thread Size

Mount Type

Pipe Size

Eye Diameter

Material

Width

Weight Capacity

1,000 lb. to 1,999 lb.

Mounting Location

Height

For Suspending

Beam Mount Location

Finish

For Beam Shape

For EMT Conduit Trade Size

For Beam Thickness

Copper Tube Size

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

Export Control Classification Number (ECCN)

REACH

RoHS

DFARS Specialty Metals

Exempt

For Rigid Conduit Trade Size

Threaded Hole Depth

Help me decide (beta)

104 Products

Threaded Rod Eye Nuts


Closed Oval Threaded Rod Eye Nuts	Closed Socket Threaded Rod Eye Nuts	Closed Turnbuckle Threaded Rod Eye Nuts

Add an eye nut to threaded rod to hang the rod from rings, hooks, and hangers.

Note: Capacity is for the eye nut only. Mounting surface and fastening hardware will affect the ultimate capacity.

Closed Socket Threaded Rod Eye Nuts—Closed socket threaded rod eye nuts hang threaded rod from center-mount beam clamps. A cutout on the side of the nut makes it easier to see thread engagement after the nut is installed.

Closed Turnbuckle Threaded Rod Eye Nuts—Closed turnbuckle threaded rod eye nuts have a swivel eye that allows height adjustment after installation.

	Eye Dia.	Ctr. Ht.	Wd.	Ht.	Threaded Rod Included	Fasteners Req.	Specs. Met	Mil. Spec.		Each
Iron







	Closed Oval Threaded Rod Eye Nuts

	1/4"-20	3/8"	225	1/4"	1"	7/8"	1 3/8"	No	No	—	—	9436T029	00000


	3/8"-16	1/2"	600	1/4"	1 3/16"	1 1/8"	1 9/16"	No	No	—	—	9436T041	0000
	1/2"-13	5/8"	1,125	1/4"	1 3/8"	1 9/32"	1 7/8"	No	No	—	—	9436T82	0000
	5/8"-11	3/4"	1,800	3/8"	1 5/8"	1 9/16"	2 1/4"	No	No	—	—	9436T83	0000
	3/4"-10	25/32"	2,700	1/2"	1 25/32"	1 7/8"	2 7/16"	No	No	—	—	9436T84	00000




			Closed Socket Threaded Rod Eye Nuts

			3/8"-16	13/16"	600	1/2"	2 1/16"	25/32"	2 1/2"	No	No	—	—	29995T71	0000


			1/2"-13	15/16"	1,125	1/2"	2 5/16"	1"	2 59/64"	No	No	—	—	29995T72	0000
			5/8"-11	1"	1,550	1/2"	2 7/16"	1 3/32"	3"	No	No	—	—	29995T73	00000
			3/4"-10	1 3/16"	2,100	1/2"	2 7/8"	1 7/32"	3 1/2"	No	No	—	—	29995T74	00000




					Closed Turnbuckle Threaded Rod Eye Nuts

					1/4"-20	1 1/4"	225	7/32"	2 1/2"	1"	2 11/16"	No	No	MSS SP-69 Type 15	Fed. Spec. WW-H-171 Type 15	3002T5	00000


					3/8"-16	1 7/8"	725	13/32"	3 7/8"	1 1/2"	4 7/16"	No	No	MSS SP-69 Type 15	Fed. Spec. WW-H-171 Type 15	3002T1	00000
					1/2"-13	1 13/16"	725	13/32"	3 7/8"	1 1/2"	4 7/16"	No	No	MSS SP-69 Type 15	Fed. Spec. WW-H-171 Type 15	3002T6	00000
					5/8"-11	2 5/16"	725	1/2"	4 7/8"	1 15/16"	5 11/16"	No	No	MSS SP-69 Type 15	Fed. Spec. WW-H-171 Type 15	3002T3	00000

Pivoting Loop Pipe Hangers

Rotate

Secure pipe overhead and allow it to tilt or rotate as needed. These pipe hangers reduce stress on joints and keep pipe aligned, even when it shifts. Attach these hangers to beams or ceilings with threaded rod.

360° Rotation—Rotate to allow movement and flexibility when pipes need to be connected at non-standard angles and when working in tight spaces.

Zinc-Plated Steel—A common choice for areas with occasional exposure to moisture, but won't stand up to chemicals.

Copper-Plated Steel—Won't corrode when used with copper tubing.

PVC-Coated Steel—Prevent wear from metal-to-metal contact due to movement or thermal expansion.

	ID
	Inch	Metric, mm	For Pipe Size	For Copper Tube Size	For Thread Size	Wt. Cap., lb.	Pkg. Qty.		Pkg.
360° Rotation







				Zinc-Plated Steel

				13/16"	21	1/2	5/8	3/8"-16	400	10	3064T11	000000


				1 1/16"	27	3/4	—	3/8"-16	400	10	3064T12	00000
				1 5/16"	33	1	—	3/8"-16	400	10	3064T13	00000
				1 11/16"	43	1 1/4	1 1/2	3/8"-16	400	10	3064T14	00000
				1 7/8"	48	1 1/2	—	3/8"-16	400	10	3064T15	00000
				2 3/8"	60	2	—	3/8"-16	400	10	3064T16	00000
				2 7/8"	73	2 1/2	—	1/2"-13	600	1	3064T17	0000
				3 1/2"	89	3	—	1/2"-13	600	1	3064T18	0000
				4"	102	3 1/2	—	1/2"-13	600	1	3064T19	00000
				4 1/2"	114	4	—	5/8"-11	1,000	1	3064T21	00000
				6 5/8"	168	6	—	1/2"-13	1,250	1	3064T22	0000




						Copper-Plated Steel

						5/8"	16	1/4	1/2	3/8"-16	400	10	3064T31	00000


						7/8"	22	1/2	3/4	3/8"-16	400	10	3064T32	00000
						1 1/8"	29	3/4	1	3/8"-16	400	10	3064T33	00000
						1 3/8"	35	1	1 1/4	3/8"-16	400	10	3064T34	00000
						1 5/8"	41	—	1 1/2	3/8"-16	400	10	3064T35	00000
						2 1/8"	54	—	2	3/8"-16	400	1	3064T36	0000
						2 5/8"	67	—	2 1/2	3/8"-16	600	1	3064T37	0000
						3 1/8"	79	—	3	3/8"-16	600	1	3064T38	0000
						4 1/8"	105	3 1/2	4	3/8"-16	1,000	1	3064T79	0000




								PVC-Coated Steel

								13/16"	21	1/2	5/8	3/8"-16	610	1	3064T41	00000


								1 1/16"	27	3/4	—	3/8"-16	610	1	3064T42	00000
								1 5/16"	33	1	—	3/8"-16	610	1	3064T43	00000
								1 11/16"	43	1 1/4	1 1/2	3/8"-16	610	1	3064T44	00000
								1 7/8"	48	1 1/2	—	3/8"-16	610	1	3064T45	00000
								2 3/8"	60	2	—	3/8"-16	610	1	3064T46	00000
								2 7/8"	73	2 1/2	—	1/2"-13	970	1	3064T47	00000
								3 1/2"	89	3	—	1/2"-13	970	1	3064T48	00000
								4"	102	3 1/2	—	1/2"-13	970	1	3064T49	00000
								4 1/2"	114	4	—	5/8"-11	1,250	1	3064T51	00000

Pipe Cradles

Cradles provide additional support and prevent tears in insulation when routing insulated pipe through loop hangers. Also known as pipe shields.

Adhesive Mount—Attach the cradle to the pipe's insulation with an adhesive strip.

Clip-On Mount—Clip the tabs of the cradle directly onto the bottom of a loop hanger.

	ID
	Inch	Metric, mm	Lg.	Wd.	Ht.	Thk.		Each
Adhesive Mount







				Galvanized Steel

				1 7/8"	48	12"	1 15/16"	1"	1/32"	9164T11	00000


				2 3/8"	60	12"	2 7/16"	1 1/4"	1/32"	9164T13	0000
				2 7/8"	73	12"	2 15/16"	1 1/2"	1/32"	9164T15	0000
				3 1/2"	89	12"	3 9/16"	1 3/4"	1/32"	9164T17	0000
				4"	102	12"	4 1/16"	2"	1/32"	9164T21	0000
				4 1/2"	114	12"	4 9/16"	2 1/4"	1/32"	9164T23	0000


				Clip-On Mount







								Zinc-Plated Steel

								1 7/8"	48	12"	2"	1"	3/64"	2620N11	00000


								2 3/8"	60	12"	2 1/2"	1 1/4"	3/64"	2620N12	00000
								2 7/8"	73	12"	3"	1 1/2"	3/64"	2620N13	00000
								3 1/2"	89	12"	3 5/8"	1 13/16"	3/64"	2620N14	00000
								4"	102	12"	4 1/8"	2 1/16"	3/64"	2620N15	00000
								4 1/2"	114	12"	4 5/8"	2 5/16"	3/64"	2620N16	00000
								6 5/8"	168	12"	6 3/4"	3 3/8"	1/16"	2620N19	00000

Sloped Beam Clamps for Threaded Rods

These clamps rotate and pivot to ensure rods hang straight, even on sloped beams.

Zinc-Plated Steel and Zinc-Plated Iron—Clamps are zinc-plated steel or iron for mild corrosion resistance.

	Wt. Cap., lb.	Mount Type	Nut Type	Throat Dp.	Lg.	Wd.	Ht.	Threaded Rod Included		Each
Bottom Beam Mount







	Zinc-Plated Steel

	Angled	1/4"-20	1/4"	160	Clamp On	—	3/4"	2 3/8"	7/8"	2 3/8"	No	4725T32	000000


	Angled	3/8"-16	1/4"	200	Clamp On	—	3/4"	2 3/8"	7/8"	2 3/8"	No	4725T33	00000
	Flat, Taper	3/8"-16	11/16"	330	Clamp On	Locknut	1 1/16"	2 1/16"	2 1/16"	3 1/8"	No	4725T23	00000
	Flat, Taper	3/8"-16, 1/2"-13	3/4"	500	Clamp On	—	1"	2"	1"	3"	No	4725T31	00000


	Bottom and Top Beam Mount







					Zinc-Plated Iron

					Flat, Taper	3/8"-16	3/4"	540	Clamp On	Locknut	7/8"	1 3/4"	7/8"	3 5/16"	No	4725T51	00000

Threaded Rod Hanger Beams

Mount these beams across parallel roof joists to hang threaded rod and route pipe, duct, and other overhead systems in areas where there’s no anchoring point. Beams are shaped to fit beneath corrugated roofing. They include a threaded rod anchor for supporting a single threaded rod.

	Cap. with 1 Threaded Rod Anchor, lb.	Cap. with 2 Threaded Rod Anchors, lb.	For Thread Size	Threaded Rod Included	Color	Includes		Each
Steel



	4	1,000	2,000	5/8"-11, 5/8"-18	No	Black	1 Threaded Rod Anchor, 2 Joist Brackets	2878N11	0000000


	5	1,000	2,000	5/8"-11, 5/8"-18	No	Black	1 Threaded Rod Anchor, 2 Joist Brackets	2878N12	000000
	6	1,000	2,000	5/8"-11, 5/8"-18	No	Black	1 Threaded Rod Anchor, 2 Joist Brackets	2878N13	000000
	7	1,000	1,800	5/8"-11, 5/8"-18	No	Black	1 Threaded Rod Anchor, 2 Joist Brackets	2878N14	000000
	8	1,000	1,550	5/8"-11, 5/8"-18	No	Black	1 Threaded Rod Anchor, 2 Joist Brackets	2878N15	000000

Anchors

		Each
Threaded Rod Anchors	2878N16	000000

Loop Pipe Hangers

Secure pipe while still allowing for slight movement to reduce stress on joints. To suspend these pipe hangers from the ceiling, twist a threaded rod into the unthreaded hole and secure with a pair of nuts (not included). Also known as teardrop hangers.

304 Stainless Steel—Withstand mild chemicals and solvents and won't rust in wet environments.

316 Stainless Steel—Our most corrosion-resistant metal pipe hangers. These won’t degrade when exposed to harsh weather, salt water, and most chemicals.

	ID				For Conduit Trade Size
	Inch	Metric, mm	For Pipe Size	For Copper Tube Size	EMT	IMC	Rigid	For Thread Size	Wt. Cap., lb.	Mounting Hole Dia.	No. of Nuts Req.		Each
304 Stainless Steel



		13/16"	21	1/2	5/8	1/2	1/2	1/2	3/8"-16	610	7/16"	2	3273T51	000000


		1 1/16"	27	3/4	—	—	3/4	3/4	3/8"-16	610	7/16"	2	3273T52	00000
		1 5/16"	33	1	—	—	1	1	3/8"-16	610	7/16"	2	3273T53	00000
		1 7/8"	48	1 1/2	—	—	1 1/2	1 1/2	3/8"-16	610	7/16"	2	3273T54	00000
		2 3/8"	60	2	—	—	2	2	3/8"-16	610	7/16"	2	3273T55	00000
		3 1/2"	89	3	—	3	3	3	1/2"-13	970	9/16"	2	3273T57	00000
		4 1/2"	114	4	—	4	4	4	1/2"-13	970	9/16"	2	3273T58	00000
		6 5/8"	168	6	—	—	—	6	3/4"-10	1,250	13/16"	2	3273T59	00000


		316 Stainless Steel



				7/8"	22	1/2	3/4	—	1/2	1/2	3/8"-16	610	7/16"	2	3064T61	0000


				1"	25	—	3/4	3/4	—	—	3/8"-16	610	7/16"	2	3064T62	0000
				1 3/8"	35	1	1 1/4	—	1	1	3/8"-16	610	7/16"	2	3064T63	0000
				1 5/8"	41	—	1 1/2	1 1/4	1 1/4	—	3/8"-16	610	7/16"	2	3064T64	0000
				1 15/16"	49	1 1/2	—	—	1 1/2	1 1/2	3/8"-16	610	7/16"	2	3064T65	00000
				2 3/8"	60	2	—	—	2	2	3/8"-16	610	7/16"	2	3064T66	00000
				2 7/8"	73	2 1/2	—	2 1/2	2 1/2	2 1/2	3/8"-16	970	9/16"	2	3064T67	00000
				3 1/2"	89	3	—	3	3	3	3/8"-16	970	9/16"	2	3064T68	00000
				4"	102	3 1/2	—	3 1/2	3 1/2	3 1/2	1/2"-13	970	9/16"	2	3064T69	00000
				4 1/2"	114	4	—	4	4	4	1/2"-13	1,250	11/16"	2	3064T71	00000

Pipe Cradles

Cradles provide additional support and prevent tears in insulation when routing insulated pipe through loop hangers. Also known as pipe shields.

Adhesive Mount—Attach the cradle to the pipe's insulation with an adhesive strip.

Clip-On Mount—Clip the tabs of the cradle directly onto the bottom of a loop hanger.

	ID
	Inch	Metric, mm	Lg.	Wd.	Ht.	Thk.		Each
Adhesive Mount







				Galvanized Steel

				1 7/8"	48	12"	1 15/16"	1"	1/32"	9164T11	00000


				2 3/8"	60	12"	2 7/16"	1 1/4"	1/32"	9164T13	0000
				2 7/8"	73	12"	2 15/16"	1 1/2"	1/32"	9164T15	0000
				3 1/2"	89	12"	3 9/16"	1 3/4"	1/32"	9164T17	0000
				4"	102	12"	4 1/16"	2"	1/32"	9164T21	0000
				4 1/2"	114	12"	4 9/16"	2 1/4"	1/32"	9164T23	0000


				Clip-On Mount







								Zinc-Plated Steel

								1 7/8"	48	12"	2"	1"	3/64"	2620N11	00000


								2 3/8"	60	12"	2 1/2"	1 1/4"	3/64"	2620N12	00000
								2 7/8"	73	12"	3"	1 1/2"	3/64"	2620N13	00000
								3 1/2"	89	12"	3 5/8"	1 13/16"	3/64"	2620N14	00000
								4"	102	12"	4 1/8"	2 1/16"	3/64"	2620N15	00000
								4 1/2"	114	12"	4 5/8"	2 5/16"	3/64"	2620N16	00000
								6 5/8"	168	12"	6 3/4"	3 3/8"	1/16"	2620N19	00000

Easy-Position Beam Clamps for Pipe, Tube, and Conduit


Clamp On	Press Fit

Suspend material at any angle from the beam. Clamps have a fixed jaw that secures to the beam and a hanger that swivels 360° to position material and accommodate for misalignment.

Clamp On—Install clamp-on clamps by tightening the clamping screw. A threaded hole on the side of the clamp supports an additional hanger or routing ring.

Press Fit—Install press-fit clamps by lightly hammering them onto the beam.

			For OD			For Beam Thk.
	Mount Type	For Beam Shape	Inch	Metric, mm	For Pipe Size	Min.	Max.	Wt. Cap., lb.	Range of Motion	Threaded Hole Size	Throat Dp.	Surface to Pipe Center	Lg.	Wd.	Ht.		Each
Bottom Beam Mount







				Zinc-Plated Steel

				Clamp On	Flat, Taper	11/16" to 13/16"	17 to 21	3/8, 1/2	—	1/2"	50	360°	1/4"-20	1/2"	1 1/4"	1 3/4"	1"	1 1/2"	30015T31	00000


				Clamp On	Flat, Taper	15/16" to 1"	24 to 25	3/4	—	1/2"	50	360°	1/4"-20	1/2"	1 7/16"	1 3/4"	1"	1 1/2"	30015T32	0000
				Clamp On	Flat, Taper	1 3/16" to 1 5/16"	30 to 33	1	—	1/2"	60	360°	1/4"-20	1/2"	1 1/2"	1 3/4"	1"	1 1/2"	30015T33	0000
				Clamp On	Flat, Taper	1 1/2"	38	—	—	1/2"	75	360°	1/4"-20	1/2"	1 11/16"	1 3/4"	1"	1 1/2"	30015T14	0000
				Clamp On	Flat, Taper	1 11/16"	43	1 1/4	—	1/2"	75	360°	1/4"-20	1/2"	1 13/16"	1 3/4"	1"	1 1/2"	30015T15	0000
				Clamp On	Flat, Taper	1 7/8"	48	1 1/2	—	1/2"	75	360°	1/4"-20	1/2"	2"	1 3/4"	1"	1 1/2"	30015T16	0000
				Clamp On	Flat, Taper	2 1/4" to 2 3/8"	57 to 60	2	—	1/2"	75	360°	1/4"-20	1/2"	2 1/4"	1 3/4"	1"	1 1/2"	30015T17	0000


				Bottom and Top Beam Mount







								Zinc-Plated Steel

								Press Fit	Flat, Taper	3/4" to 1"	19 to 25	1/2	1/8"	1/4"	75	360°	—	1"	3/4"	1 3/8"	1 3/4"	3"	3007T211	0000


								Press Fit	Flat, Taper	3/4" to 1"	19 to 25	1/2	5/16"	1/2"	75	360°	—	1"	3/4"	1 3/8"	1 3/4"	3 1/4"	3007T11	0000
								Press Fit	Flat, Taper	3/4" to 1"	19 to 25	1/2	9/16"	3/4"	75	360°	—	1"	3/4"	1 1/2"	1 3/4"	3 1/2"	3007T212	0000
								Press Fit	Flat, Taper	3/4" to 1"	19 to 25	1/2	13/16"	1 1/8"	75	360°	—	1"	3/4"	1 1/2"	1 3/4"	3 3/4"	3007T213	0000
								Press Fit	Flat, Taper	1 3/16" to 1 5/16"	30 to 33	1	1/8"	1/4"	75	360°	—	1"	1"	1 3/8"	1 3/4"	3 1/2"	3007T214	0000
								Press Fit	Flat, Taper	1 3/16" to 1 5/16"	30 to 33	1	5/16"	1/2"	75	360°	—	1"	1"	1 3/8"	1 3/4"	3 3/4"	3007T12	0000
								Press Fit	Flat, Taper	1 3/16" to 1 5/16"	30 to 33	1	9/16"	3/4"	75	360°	—	1"	1"	1 1/2"	1 3/4"	4"	3007T215	0000
								Press Fit	Flat, Taper	1 5/16" to 1 5/8"	33 to 41	1 1/4	1/8"	1/4"	75	360°	—	1"	1"	1 3/8"	1 3/4"	3 3/4"	3007T216	0000
								Press Fit	Flat, Taper	1 5/16" to 1 5/8"	33 to 41	1 1/4	5/16"	1/2"	75	360°	—	1"	1"	1 3/8"	1 3/4"	4"	3007T13	0000
								Press Fit	Flat, Taper	1 3/4" to 1 7/8"	44 to 48	1 1/2	5/16"	1/2"	75	360°	—	1"	1 1/4"	1 3/8"	1 3/4"	4 1/4"	3007T14	0000
								Press Fit	Flat, Taper	1 7/8" to 2 3/8"	48 to 60	2	5/16"	1/2"	75	360°	—	1"	1 1/2"	1 3/8"	1 3/4"	5"	3007T15	0000


								Press Fit	Flat, Taper	1 7/8" to 2 3/8"	48 to 60	2	9/16"	3/4"	75	360°	—	1"	1 1/2"	1 1/2"	1 3/4"	5 1/4"	3007T221	0000