Also known as occupancy sensors, these controls turn lights on when movement is detected and off when an area is unoccupied. The infrared/ultrasonic sensors minimize false activation by detecting heat and motion. They can be set so that only one or both detection methods are required to activate and hold lights on. All have a time delay to turn lights off after a set time. The mounting bracket swivels 90° so that the control can be mounted on a wall or ceiling.

Power controllers (sold separately) are required to switch a 120- or 277-volt AC lighting circuit. They have a relay that switches a maximum 20 amp load.

For technical drawings and 3-D models, click on a part number.

Automatically turn outdoor lights on after dark and off at daybreak, conserving energy when lights are not needed. A time delay prevents false switches due to light flashes.

Wall-mount controls require a base (sold separately).

Turn the dial to control humidity equipment.

Install sockets for medium (standard household) screw-in base light bulbs.

Styles A-C mount to outlet boxes.

If you don't have your remote, you can still open and close automatic overhead doors with a private 4-digit PIN. Use these transmitters to operate one transmitter or receiver. The keypad is backlit for visibility in the dark.