We will reply to your message within an hour.
More
More durable than standard metal switches, these can handle tough, repetitive use.
Able to handle tough, repetitive use, these switches are more durable than standard plastic switches.
The face of these switches mounts flush against a panel, so they're easy to clean and hard to damage.
Immediately cut power with a single push.
Rated NEMA 4X and 13, all switches resist corrosion and can withstand washdowns and oil/coolant spraying.
Rated NEMA 3S, NEMA 4X, NEMA 13, and IP66, these plastic switches resist corrosion better than aluminum switches and withstand washdowns and oil/coolant spraying.
These aluminum switches are rated NEMA 4, NEMA 13, and IP66 for protection from washdowns and oil/coolant spraying.
These switches are protected from corrosion, high-temperature and high-pressure washdowns, and oil/coolant spraying. Install them in 22 mm dia. cutouts.
Switches are rated NEMA 4, 13, and IP66.
Rated NEMA 4, 13, and IP66, these metal switches are protected from washdowns and oil/coolant spraying. Install them in 30 mm dia. cutouts.
These plastic switches are rated NEMA 4X, 13, and IP65 for protection from corrosion, washdowns, and oil/coolant spraying. Install them in 30 mm dia. cutouts.
Install in 16 mm dia. cutouts.
Rated NEMA 3S, 4X and 13, these switches are protected from corrosion, washdowns, and oil/coolant spraying.
Choose an actuator and contact block to make your own 22 mm plastic switch.
Choose an actuator and contact block to make your own 22 mm metal switch.
Choose an actuator and contact block to make your own 16 mm switch.
Press these switches with your foot for convenient, hands-free operation.
Control multiple devices with one switch. Turn the shaft to change switch positions.
Sized for 22 mm dia. panel cutouts, these switches require a key to turn circuits on or off, limiting access to sensitive equipment.
Install these key switches in 30 mm dia. panel cutouts. They require a key to turn circuits on or off, limiting access to sensitive equipment.
These 16 mm switches require a key to turn circuits on or off, limiting access to sensitive equipment.
Grab these switches by hand and pivot them to use.
Prevent equipment from automatically restarting—these switches must be manually reset each time they're actuated.
Use these switches where ignitable gas and dust may be present. They meet NEC Class I, Division 1, Groups B, C, and D; and Class II, Division 1, Groups E, F, and G for hazardous locations.
Often used with machine guards, these switches mount to a door frame.
Delay access to hazardous areas until conditions are safe; use these switches with machines that take time to stop after they are turned off. They mount to a door frame.
These switches actuate when a magnet comes within sensing distance, and reset when the magnet moves away.
Often used as position indicators, pump level controls, and machine limit switches, these switches actuate when tilted to a certain angle.
With no moving parts, these solid-state relays are fast switching and require less maintenance, last longer, and are quieter than mechanical switches.
Control and diagnose issues with safety-critical circuits.