McMaster-Carr logo
    Filter by
    System of Measurement
    Electrical Phase
    Switching Voltage
    Industrial Info Snippet
    Number of Circuits Controlled
    Actuator Color
    Housing Color
    Number of Terminals
    Switch Designation
    Industrial Info Compare
    Housing Material
    Mounting Location
    For Wire Gauge
    Switch Action
    Industrial Info Compare
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    DFARS Specialty Metals
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    84 Products

    Panel-Mount Compact Disconnect Switches

    Install these switches in a panel cutout. Small enough to fit in tight spaces, they handle comparable electrical loads to standard sized switches. They cut power and keep it isolated to prevent equipment from starting up during inspection and maintenance.
    Maintained SwitchAbout Maintained Switch
    Image of Product. Front orientation. Disconnect Switches. Panel-Mount Compact Disconnect Switches.
    Lockout—All switches have a lockout so you can secure them in the off position with a padlock (not included).
    IP65 Enclosure Rating—They’re rated IP65 for protection from washdowns.
    Switching Current @ Voltage
    Switch
    Designation
    Electrical Phase (hp)
    Ht.
    Wd.
    Dp. Behind
    Panel
    For Max. Padlock
    Shackle Dia.
    Enclosure
    Rating
    Certification
    Specs.
    Met
    Each
    Gray Plastic Housing with Black Actuator
     
    3 Circuits Controlled with Lockout—For 3/8" Dia. Panel Cutouts
    25 amp @ 600V AC, 32 amp @ 24V DC3PST
    		Single (2 hp @ 120V AC)
    Three (3 hp @ 120V AC)
    Three (7 1/2 hp @ 240V AC)    		4"3 1/8"2"5/16"IP65
    		UL Recognized Component
    		UL 50865915K1040000000
     
    4 Circuits Controlled with Lockout—For 3/8" Dia. Panel Cutouts
    25 amp @ 600V AC, 32 amp @ 24V DC4PST
    		Single (2 hp @ 120V AC)
    Three (3 hp @ 120V AC)
    Three (7 1/2 hp @ 240V AC)    		4"3 1/8"2"5/16"IP65
    		UL Recognized Component
    		UL 50865915K111000000
     
    Yellow Plastic Housing with Red Actuator
     
    3 Circuits Controlled with Lockout—For 3/8" Dia. Panel Cutouts
    25 amp @ 600V AC, 32 amp @ 24V DC3PST
    		Single (2 hp @ 120V AC)
    Three (3 hp @ 120V AC)
    Three (7 1/2 hp @ 240V AC)    		4"3 1/8"2"5/16"IP65
    		UL Recognized Component
    		UL 50865915K14000000
     
    4 Circuits Controlled with Lockout—For 3/8" Dia. Panel Cutouts
    25 amp @ 600V AC, 32 amp @ 24V DC4PST
    		Single (2 hp @ 120V AC)
    Three (3 hp @ 120V AC)
    Three (7 1/2 hp @ 240V AC)    		4"3 1/8"2"5/16"IP65
    		UL Recognized Component
    		UL 50865915K44000000
     

    Panel-Mount Disconnect Switches

    Image of Product. Front orientation. Disconnect Switches. Panel-Mount Disconnect Switches.
    Image of Product. Power Pole. Front orientation. Disconnect Switches. Panel-Mount Disconnect Switches.
    Image of Product. Neutral Pole. Front orientation. Disconnect Switches. Panel-Mount Disconnect Switches.

    Power Pole

    Neutral Pole

    Install these switches in a panel cutout. They cut power and keep it isolated to prevent equipment from starting up during inspection and maintenance.
    Use additional switch power poles to control more than three circuits. Add neutral poles to open and close the neutral leg of a three phase system.
    Maintained SwitchAbout Maintained Switch
    Image of Product. Switch with Lockout. Front orientation. Disconnect Switches. Panel-Mount Disconnect Switches, Plastic Housing, Lockout, 3 Circuits Controlled.

    Switch with

    Lockout

    Lockout—Switches with lockout secure in the off position with a padlock with a maximum shackle diameter of 5/16” (not included).
    Certification—All are UL listed, C-UL listed, and CE marked—they meet American, Canadian, and European safety standards.
    Switching
    Current,
    amp
    Voltage,
    V AC
    Switch
    Designation
    Electrical Phase (hp)
    Ht.
    Wd.
    Dp. Behind
    Panel
    For Max. Padlock
    Shackle Dia.
    Wire
    Connection
    Enclosure
    Rating
    Certification
    Each
    Gray Plastic Housing with Gray Actuator
     
    3 Circuits Controlled—For 3/8" Dia. Panel Cutouts
    326003PST
    		Single (1 hp @ 120V AC)
    Single (2 hp @ 240V AC)
    Three (5 hp @ 240V AC)    		2 1/2"2 1/2"2"—Screw TerminalIP40
    		UL Listed, C-UL Listed, CE Marked
    		6759K242000000
     
    3 Circuits Controlled with Lockout—For 3/8" Dia. Panel Cutouts
    326003PST
    		Single (1 hp @ 120V AC)
    Single (2 hp @ 240V AC)
    Three (5 hp @ 240V AC)    		2 5/8"2 5/8"2"5/16"Screw TerminalIP40
    		UL Listed, C-UL Listed, CE Marked
    		6759K22200000
     
    Yellow Plastic Housing with Red Actuator
     
    3 Circuits Controlled—For 3/8" Dia. Panel Cutouts
    326003PST
    		Single (1 hp @ 120V AC)
    Single (2 hp @ 240V AC)
    Three (5 hp @ 240V AC)    		2 1/2"2 1/2"2"—Screw TerminalIP40
    		UL Listed, C-UL Listed, CE Marked
    		6759K23200000
     
    3 Circuits Controlled with Lockout—For 3/8" Dia. Panel Cutouts
    326003PST
    		Single (1 hp @ 120V AC)
    Single (2 hp @ 240V AC)
    Three (5 hp @ 240V AC)    		2 5/8"2 5/8"2"5/16"Screw TerminalIP40
    		UL Listed, C-UL Listed, CE Marked
    		6759K21200000
     
    Accessories and Replacements for Disconnect Switches
    Replacement Actuators
    Image of Product. Front orientation. Disconnect Switch Actuators. Panel-Mount Disconnect Switches.
    Gray Plastic Housing
    with Gray Actuator
    Yellow Plastic Housing
    with Red Actuator
    For Switching Current, amp
    Ht.
    Wd.
    Dp.
    Each
    Each
    25, 32, 50, 632 9/16"2 9/16"1 5/16"7277K460000007277K12000000
    Auxiliary Contact Blocks
    Image of Product. Front orientation. Contact Blocks. Panel-Mount Disconnect Switches.
    Add auxiliary contact blocks to send a signal or connect to another device, such as an alarm or indicating light.
    Switching
    No. of Circuits
    Controlled
    Current,
    amp
    Voltage,
    V AC
    Switch Starting
    Position
    Switch
    Designation
    Each
    1106001 Off or 1 On
    		SPDT
    		7277K11000000
    Power Poles
    Switching
    Current, amp
    Certification
    Each
    32UL Listed, CE Marked
    		6759K412000000
    Neutral Poles
    Switching
    Current, amp
    Certification
    Each
    32UL Listed, CE Marked
    		6759K422000000
    Junction Blocks
    Image of Product. Front orientation. Junction Blocks. Panel-Mount Disconnect Switches.
    For Current,
    amp
    Certification
    Each
    25, 32UL Listed, CE Marked
    		6759K431000000
    Terminal Covers
    Image of Product. Front orientation. Terminal Block Covers. Panel-Mount Disconnect Switches.
    Terminal covers prevent contact with live terminals.
    For Use With
    Each
    Power Poles, Neutral Poles, Junction Blocks7277K2100000
    Switch Contact Blocks7277K130000
    Auxiliary Contact Blocks7277K140000
    Labels
    Each
    "Main Switch" Label with Adhesive Back—13/16" Ht. × 3 3/16" Wd.6759K65000000

    Enclosed Disconnect Switches

    Image of Product. Power Pole. Front orientation. Disconnect Switches. Enclosed Disconnect Switches.
    Image of Product. Neutral Pole. Front orientation. Disconnect Switches. Enclosed Disconnect Switches.

    Power Pole

    Neutral Pole

    Cut power and keep it isolated to prevent equipment from starting up during inspection and maintenance. These switches are housed in a protective enclosure that resists denting, chipping, and cracking. Mount them to the wall when you run out of space in an electrical panel.
    Use additional switch power poles to control more than three circuits. Add neutral poles to open and close the neutral leg of a three phase system.
    Maintained SwitchAbout Maintained Switch
    Image of Product. Two-Circuit Switch with Lockout. Front orientation. Disconnect Switches. Enclosed Disconnect Switches, Plastic Housing, 2 Circuits Controlled, Lockout.

    Two-Circuit

    Switch with

    Lockout

    Lockout—Switches with lockout secure in the off position with a padlock with a maximum shackle diameter of 5/16” (not included).
    Photovoltaic—Photovoltaic switches can be used with photovoltaic cells which convert sunlight into electricity.
    Switching
    Current,
    amp
    Voltage,
    V DC
    Switch
    Designation
    Ht.
    Wd.
    For Max. Padlock
    Shackle Dia.
    Wire
    Connection
    Enclosure Rating
    Certification
    Each
    Yellow Plastic Housing with Red Actuator
     
    2 Circuits Controlled with Lockout/Photovoltaic
    32800DPST
    		11"7 1/2"5/16"Screw TerminalIP66
    IP67
    NEMA 3S
    NEMA 6P
    NEMA 12
    		UL Listed, C-UL Listed, CE Marked
    		6759K730000000
     
    Labels
    Each
    "Main Switch" Label with Adhesive Back—13/16" Ht. × 3 3/16" Wd.6759K65000000

    Enclosed Compact Disconnect Switches

    Small yet mighty, these switches are about as tall and wide as an index card yet durable enough to mount directly to a wall. Don’t be fooled by their size—these switches can handle electrical loads comparable to a standard sized switch.
    These switches cut power and keep it isolated to prevent equipment from starting up during inspection and maintenance.
    Maintained SwitchAbout Maintained Switch
    Image of Product. Front orientation. Disconnect Switches. Enclosed Compact Disconnect Switches.
    Plastic Housing—Their plastic housing protects the switch and resists denting, chipping, and cracking.
    Lockout—All switches have a lockout so you can secure them in the off position with a padlock (not included).
    IP65 Enclosure Rating—Rated IP65, the housing also seals out water even in frequently washed down areas.
    Switching Current @ Voltage
    Switch
    Designation
    Electrical Phase (hp)
    Ht.
    Wd.
    For Max. Padlock
    Shackle Dia.
    Enclosure
    Rating
    Certification
    Specs.
    Met
    Each
    Yellow Plastic Housing with Red Actuator
     
    3 Circuits Controlled with Lockout
    25 amp @ 600V AC, 32 amp @ 24V DC3PST
    		Single (2 hp @ 120V AC)
    Three (3 hp @ 120V AC)
    Three (7 1/2 hp @ 240V AC)    		4 3/4"3 13/16"5/16"IP65
    		UL Recognized Component, CSA Certified
    		UL 50865915K240000000
     
    4 Circuits Controlled with Lockout
    25 amp @ 600V AC, 32 amp @ 24V DC4PST
    		Single (2 hp @ 120V AC)
    Three (3 hp @ 120V AC)
    Three (7 1/2 hp @ 240V AC)    		4 3/4"3 13/16"5/16"IP65
    		UL Recognized Component, CSA Certified
    		—65915K37000000
     

    Washdown Enclosed Disconnect Switches

    Image of Product. Power Pole. Front orientation. Disconnect Switches. Washdown Enclosed Disconnect Switches.
    Image of Product. Neutral Pole. Front orientation. Disconnect Switches. Washdown Enclosed Disconnect Switches.

    Power Pole

    Neutral Pole

    These switches cut power and keep it isolated to prevent equipment from starting up during inspection and maintenance.
    Use additional switch power poles to control more than three circuits. Add neutral poles to open and close the neutral leg of a three phase system.
    Maintained SwitchAbout Maintained Switch
    Image of Product. Switch with Plastic Housing. Front orientation. Disconnect Switches. Washdown Enclosed Disconnect Switches, Plastic Housing.
    Image of Product. Switch with Lockout and Plastic Housing. Front orientation. Disconnect Switches. Washdown Enclosed Disconnect Switches, Plastic Housing, 3 Circuits Controlled with Lockout.

    Switch with

    Plastic Housing

    Switch with

    Lockout and

    Plastic Housing

    Lockout—Switches with lockout secure in the off position with a padlock with a maximum shackle diameter of 5/16” (not included).
    IP66 Enclosure Rating—The IP66 rated housing not only shields these switches from washdowns but also makes them durable enough to be mounted outside of an electrical panel.
    Switching
    Current,
    amp
    Voltage,
    V AC
    Switch
    Designation
    Electrical Phase (hp)
    Ht.
    Wd.
    For Max. Padlock
    Shackle Dia.
    Wire
    Connection
    Enclosure
    Rating
    Certification
    Each
    Gray Plastic Housing with Red Actuator
     
    3 Circuits Controlled
    326003PST
    		Single (1 hp @ 120V AC)
    Single (2 hp @ 240V AC)
    Three (5 hp @ 240V AC)    		5 7/8"4 5/16"—Screw TerminalIP66
    		UL Listed, C-UL Listed, CE Marked
    		6759K332000000
     
    Gray Plastic Housing with Gray Actuator
     
    3 Circuits Controlled with Lockout
    326003PST
    		Single (1 hp @ 120V AC)
    Single (2 hp @ 240V AC)
    Three (5 hp @ 240V AC)    		5 7/8"3 7/8"5/16"Screw TerminalIP66
    		UL Listed, C-UL Listed, CE Marked
    		6759K32200000
     
    3 Circuits Controlled
    326003PST
    		Single (1 hp @ 120V AC)
    Single (2 hp @ 240V AC)
    Three (5 hp @ 240V AC)    		5 7/8"4 5/16"—Screw TerminalIP66
    		UL Listed, C-UL Listed, CE Marked
    		6759K34200000
     
    Yellow Plastic Housing with Red Actuator
     
    3 Circuits Controlled with Lockout
    326003PST
    		Single (1 hp @ 120V AC)
    Single (2 hp @ 240V AC)
    Three (5 hp @ 240V AC)    		5 7/8"3 7/8"5/16"Screw TerminalIP66
    		UL Listed, C-UL Listed, CE Marked
    		6759K31200000
     
    Accessories and Replacements for Disconnect Switches
    Replacement Actuators
    Image of Product. Front orientation. Disconnect Switch Actuators. Washdown Enclosed Disconnect Switches.
    Yellow Plastic Housing
    with Red Actuator
    For Switching Current, amp
    Ht.
    Wd.
    Dp.
    Each
    25, 32, 50, 632 9/16"2 9/16"1 5/16"7277K12000000
    Auxiliary Contact Blocks
    Image of Product. Front orientation. Contact Blocks. Washdown Enclosed Disconnect Switches.
    Add auxiliary contact blocks to send a signal or connect to another device, such as an alarm or indicating light.
    Switching
    No. of Circuits
    Controlled
    Current,
    amp
    Voltage,
    V AC
    Switch Starting
    Position
    Switch
    Designation
    Each
    1106001 Off or 1 On
    		SPDT
    		7277K11000000
    Power Poles
    Switching
    Current, amp
    Certification
    Each
    32UL Listed, CE Marked
    		6759K412000000
    Neutral Poles
    Switching
    Current, amp
    Certification
    Each
    32UL Listed, CE Marked
    		6759K422000000
    Junction Blocks
    Image of Product. Front orientation. Junction Blocks. Washdown Enclosed Disconnect Switches.
    For Current,
    amp
    Certification
    Each
    25, 32UL Listed, CE Marked
    		6759K431000000
    Labels
    Each
    "Main Switch" Label with Adhesive Back—13/16" Ht. × 3 3/16" Wd.6759K65000000

    DIN-Rail Mount Disconnect Switches

    Image of Product. Power Pole. Front orientation. Disconnect Switches. DIN-Rail Mount Disconnect Switches.
    Image of Product. Neutral Pole. Front orientation. Disconnect Switches. DIN-Rail Mount Disconnect Switches.
    Image of Product. Front orientation. Disconnect Switches. DIN-Rail Mount Disconnect Switches.

    Power Pole

    Neutral Pole

    Often used in electrical enclosures, these switches mount directly to DIN rails. They cut power and keep it isolated to stop equipment from starting up during inspection and maintenance. For an extra level of security, add a padlock (not included) to lock out the actuator lever in the Off position.
    Use additional switch power poles to control additional circuits. Add neutral poles to open and close the neutral leg of a three-phase system.
    Maintained SwitchAbout Maintained Switch
    Switching
    Current,
    amp
    Voltage,
    V AC
    Switch
    Designation
    Electrical Phase (hp)
    Ht.
    Wd.
    For Max. Padlock
    Shackle Dia.
    For DIN
    Rail Ht., mm
    Wire
    Connection
    Certification
    Specs.
    Met
    Each
    Gray Plastic Housing with Black Actuator
     
    3 Circuits Controlled with Lockout
    326003PST
    		Single (1 hp @ 120V AC)
    Single (2 hp @ 240V AC)
    Three (5 hp @ 240V AC)    		3"1 3/4"5/16"35Screw TerminalUL Listed, C-UL Listed, CE Marked
    		UL 5087815N12000000
     
    4 Circuits Controlled with Lockout
    326004PST
    		Single (1 hp @ 120V AC)
    Single (2 hp @ 240V AC)
    Three (5 hp @ 240V AC)    		3"1 3/4"5/16"35Screw TerminalUL Listed, C-UL Listed, CE Marked
    		UL 5087815N1800000
     
    Accessories for Disconnect Switches
    Auxiliary Contact Blocks
    Image of Product. Front orientation. Contact Blocks. DIN-Rail Mount Disconnect Switches.
    Add auxiliary contact blocks to send a signal or connect to another device, such as an alarm or indicating light.
    Switching
    No. of Circuits
    Controlled
    Current,
    amp
    Voltage,
    V AC
    Switch Starting
    Position
    Switch
    Designation
    Each
    1106001 Off or 1 On
    		SPDT
    		7277K11000000
    Power Poles
    Switching
    Current, amp
    Certification
    Each
    32UL Listed, CE Marked
    		6759K412000000
    Neutral Poles
    Switching
    Current, amp
    Certification
    Each
    32UL Listed, CE Marked
    		6759K422000000
    Junction Blocks
    Image of Product. Front orientation. Junction Blocks. DIN-Rail Mount Disconnect Switches.
    Add junction blocks to connect a ground wire.
    For Current,
    amp
    Certification
    Each
    25, 32UL Listed, CE Marked
    		6759K431000000
    Terminal Covers
    Image of Product. Front orientation. Terminal Block Covers. DIN-Rail Mount Disconnect Switches.
    Terminal covers prevent contact with live terminals.
    For Use With
    Each
    Power Poles, Neutral Poles, Junction Blocks7277K2100000
    Switch Contact Blocks7277K130000
    Auxiliary Contact Blocks7277K140000

    Enclosure Motor Switches

    Image of Specification. Front orientation. Contains Annotated. Enclosure Motor Switches.
    Designed to mount on an electrical enclosure, these switches control motors, lighting, and electric heat circuits. Your enclosure door will only open when the switch is turned to the off position. This ensures equipment is safely off before you open the electrical enclosure. For an extra layer of safety, use a padlock (not included) on the actuator lever to lock switches in the off position. These switches do not provide overload protection.
    Cut the shaft to fit your enclosure. Mount to a DIN rail inside an enclosure; mounting depth is the distance from the panel door to the DIN rail.
    Switching
    No. of Circuits
    Controlled
    Electrical Phase (hp)
    Switch Starting
    Position
    Switch
    Designation
    Current,
    amp
    Voltage,
    V AC
    Housing
    Material
    Ht.
    Wd.
    For DIN
    Rail Ht., mm
    Mounting Dp.
    Wire
    Connection
    Environment
    Enclosure
    Rating
    Certification
    Each
    Maintained
     
    Lever Actuator
    3Single (2 hp @ 240V AC)
    Single (5 hp @ 480V AC)
    Three (5 hp @ 240V AC)
    Three (10 hp @ 480V AC)    		3 Off
    		3PST-NO
    		32600Plastic2.4"2.4"357 7/8" to 14 5/8"Screw TerminalDusty, Washdown, WetIP65
    		UL Listed, C-UL Listed, CSA Certified
    		7802N120000000
     

    Enclosure Disconnect Switches

    Install these switches inside an enclosure to prevent it from opening when power is on—turn the switch to disconnect power and release the door. Cut the shaft to fit the enclosure. Use a padlock (not included) to lock switches in the off position.
    Use additional switch power poles to control more than three circuits. Add neutral poles to open and close the neutral leg of a three-phase system.
    Switches with Lockout Only
    Image of Product. 3 Circuits. Front orientation. Contains Annotated. Disconnect Switches. Enclosure Disconnect Switches, Switches with Lockout Only, Plastic Housing, 3 Circuits Controlled.
    Image of Product. 4 Circuits. Front orientation. Contains Annotated. Disconnect Switches. Enclosure Disconnect Switches, Switches with Lockout Only, Plastic Housing, 4 Circuits Controlled.
    Image of Product. Front orientation. Switch Seals. Enclosure Disconnect Switches.

    3 Circuits

    4 Circuits

    Sealing Gaskets

    Mounting Depth—Mount to DIN rail inside an enclosure; mounting depth is the distance from the panel door to the DIN rail.
    Enclosure Rating—All meet at least one safety standard.
    Sealing Gaskets—Use sealing gaskets in washdown environments; they create an IP65 rated seal around the actuator.
    Switches
    Replacement
    Shafts
    Replacement
    Shaft Bases
    Sealing Gaskets
    Switching
    Current,
    amp
    Voltage,
    V AC
    Electrical Phase (hp)
    Ht.
    Wd.
    For DIN
    Rail Ht., mm
    Mounting Dp.
    Enclosure
    Rating
    Each
    Each
    Each
    Each
    Gray Plastic Housing with Gray Actuator
     
    3 Circuits Controlled—For 1 3/16" Dia. Panel Cutouts
    32600Single (1 hp @ 120V AC)
    Single (2 hp @ 240V AC)
    Three (2 hp @ 120V AC)
    Three (5 hp @ 240V AC)    		2 5/8"2 5/8"354 7/8" to 15 3/4"IP40
    		7277K270000007277K160000007277K17000007277K1800000
     
    Yellow Plastic Housing with Red Actuator
     
    3 Circuits Controlled—For 1 3/16" Dia. Panel Cutouts
    32600Single (1 hp @ 120V AC)
    Single (2 hp @ 240V AC)
    Three (2 hp @ 120V AC)
    Three (5 hp @ 240V AC)    		2 5/8"2 5/8"354 7/8" to 15 3/4"IP40
    		7277K52000007277K16000007277K1700007277K180000
     
    4 Circuits Controlled—For 1 3/16" Dia. Panel Cutouts
    32600Single (1 hp @ 120V AC)
    Single (2 hp @ 240V AC)
    Three (2 hp @ 120V AC)
    Three (5 hp @ 240V AC)    		2 5/8"2 5/8"354 7/8" to 15 3/4"IP40
    		7277K340000007277K16000007277K1700007277K180000
     
    Accessories and Replacements for Disconnect Switches
    Replacement Actuators
    Image of Product. Front orientation. Disconnect Switch Actuators. Enclosure Disconnect Switches, Switches with Lockout Only.
    Gray Plastic Housing
    with Gray Actuator
    Yellow Plastic Housing
    with Red Actuator
    For Switching Current, amp
    Ht.
    Wd.
    Dp.
    Each
    Each
    25, 32, 50, 632 9/16"2 9/16"1 5/16"7277K460000007277K12000000
    Auxiliary Contact Blocks
    Image of Product. Front orientation. Contact Blocks. Enclosure Disconnect Switches, Switches with Lockout Only.
    Add auxiliary contact blocks to send a signal or connect to another device, such as an alarm or indicating light.
    Switching
    No. of Circuits
    Controlled
    Current,
    amp
    Voltage,
    V AC
    Switch Starting
    Position
    Switch
    Designation
    Each
    1106001 Off or 1 On
    		SPDT
    		7277K11000000
    Power Poles
    Image of Product. Power Pole. Front orientation. Switch Power Poles. Enclosure Disconnect Switches, Switches with Lockout Only.

    Power Pole

    Switching
    Current, amp
    Certification
    Each
    32UL Listed, CE Marked
    		6759K412000000
    Neutral Poles
    Image of Product. Power Pole. Front orientation. Switch Power Poles. Enclosure Disconnect Switches, Switches with Lockout Only.

    Power Pole

    Switching
    Current, amp
    Certification
    Each
    32UL Listed, CE Marked
    		6759K422000000
    Junction Blocks
    Image of Product. Front orientation. Junction Blocks. Enclosure Disconnect Switches.
    Add junction blocks to connect a ground wire.
    For Current,
    amp
    Certification
    Each
    25, 32UL Listed, CE Marked
    		6759K431000000
    Terminal Covers
    Image of Product. Front orientation. Terminal Block Covers. Enclosure Disconnect Switches.
    Terminal covers prevent contact with live terminals.
    For Use With
    Each
    Power Poles, Neutral Poles, Junction Blocks7277K2100000
    Switch Contact Blocks7277K130000
    Auxiliary Contact Blocks7277K140000

    Manual Override Enclosure Disconnect Switches

    Image of Product. Power Pole. Front orientation. Disconnect Switches. Manual Override Enclosure Disconnect Switches.
    Image of Product. Neutral Pole. Front orientation. Disconnect Switches. Manual Override Enclosure Disconnect Switches.
    Image of Product. Front orientation. Contains Annotated. Disconnect Switches. Manual Override Enclosure Disconnect Switches.

    Power Pole

    Neutral Pole

    Keep power running while you access your enclosure. Unlike standard enclosure disconnect switches, which shut off power as you open your enclosure, these have an override function. Engaging the override allows you to take voltage reading, troubleshoot an error code, or fine tune the speed of your line. Cut the shaft to fit your enclosure.
    Use additional switch power poles to control more than three circuits. Add neutral poles to open and close the neutral leg of a three-phase system.
    Lockout—All switches have a lockout so you can secure them in the off position with a padlock (not included).
    Safety Interlock—When the override is off, these work like a standard disconnect switch—a safety interlock prevents your enclosure from opening when power is on. The interlock also prevents the switch from turning on when the door is already open.
    Switching
    Current,
    amp
    Voltage,
    V AC
    Electrical Phase (hp)
    Ht.
    Wd.
    For Max. Padlock
    Shackle Dia.
    For DIN
    Rail Ht., mm
    Mounting Dp.
    Enclosure Rating
    Certification
    Each
    Black Plastic Housing with Black Actuator
     
    3 Circuits Controlled with Lockout and Safety Interlock—For 1 1/2" Dia. Panel Cutouts
    32600Single (1 hp @ 120V AC)
    Single (2 hp @ 240V AC)
    Three (2 hp @ 120V AC)
    Three (5 hp @ 240V AC)    		3"4 1/16"5/16"354 7/8" to 15 3/4"IP66
    NEMA 4X
    NEMA 12
    		UL Listed, C-UL Listed, CE Marked
    		7994N180000000
     
    Black Plastic Housing with Red Actuator
     
    3 Circuits Controlled with Lockout and Safety Interlock—For 1 1/2" Dia. Panel Cutouts
    32600Single (1 hp @ 120V AC)
    Single (2 hp @ 240V AC)
    Three (2 hp @ 120V AC)
    Three (5 hp @ 240V AC)    		3"4 1/16"5/16"354 7/8" to 15 3/4"IP66
    NEMA 4X
    NEMA 12
    		UL Listed, C-UL Listed, CE Marked
    		7994N12000000
     
    Accessories and Replacements for Disconnect Switches
    Replacement Actuators
    Image of Product. Front orientation. Disconnect Switch Actuators. Manual Override Enclosure Disconnect Switches.
    Black Plastic Housing
    with Black Actuator
    Black Plastic Housing
    with Red Actuator
    For Switching Current, amp
    Ht.
    Wd.
    Each
    Each
    25, 32, 50, 63, 80, 1003"4 1/16"7994N250000007994N24000000
    Auxiliary Contact Blocks
    Image of Product. Front orientation. Contact Blocks. Manual Override Enclosure Disconnect Switches.
    Add auxiliary contact blocks to send a signal or connect to another device, such as an alarm or indicating light.
    Switching
    No. of Circuits
    Controlled
    Current,
    amp
    Voltage,
    V AC
    Switch Starting
    Position
    Switch
    Designation
    Each
    1106001 Off or 1 On
    		SPDT
    		7277K11000000
    Power Poles
    Switching
    Current, amp
    Certification
    Each
    32UL Listed, CE Marked
    		6759K412000000
    Neutral Poles
    Switching
    Current, amp
    Certification
    Each
    32UL Listed, CE Marked
    		6759K422000000
    Junction Blocks
    Image of Product. Front orientation. Junction Blocks. Manual Override Enclosure Disconnect Switches.
    Add junction blocks to connect a ground wire.
    For Current,
    amp
    Certification
    Each
    25, 32UL Listed, CE Marked
    		6759K431000000
    Terminal Covers
    Image of Product. Front orientation. Terminal Block Covers. Manual Override Enclosure Disconnect Switches.
    Terminal covers prevent contact with live terminals.
    For Use With
    Each
    Power Poles, Neutral Poles, Junction Blocks7277K2100000
    Switch Contact Blocks7277K130000
    Auxiliary Contact Blocks7277K140000

    DIN-Rail Mount Touch-Safe Screw Terminal Relays

    Image of Product. Front orientation. Contains Annotated. Relays. DIN-Rail Mount Touch-Safe Screw Terminal Relays.
    Quickly and safely mount these relays on 35 mm DIN rail (also known as DIN 3). IP20 rated, they have recessed terminals that prevent fingers and other objects from touching live circuits.
    3 Circuits Controlled and 4 Circuits Controlled—Relays that control 3 and 4 circuits are built to IEC dimensional standards and are often called IEC contactors.
    12 Terminals—Relays with 12 terminals let you attach the control circuit onto the side that works best for your setup, which reduces the amount of wire you need.
    hp @
    Switching Voltage
    No. of
    Terminals
    Input
    Voltage
    Control
    Power
    Switching Current @
    Voltage (Load Type)
    Max. Switching
    Voltage, V AC
    Single Phase
    Three Phase
    Ht.
    Wd.
    Dp.
    Each
    3 Circuits Controlled with 3 Off—3PST-NO
     
    With 1 Auxiliary Contact—1 Off
    1224V AC6.5 VA17 amp @ 600V AC (Full)
    32 amp @ 600V AC (Resistive)    		6001 hp @ 120V AC
    3 hp @ 240V AC    		5 hp @ 240V AC
    10 hp @ 480V AC
    15 hp @ 600V AC    		3.2"1.8"3.2"70255K331000000
    1224V AC6.5 VA17 amp @ 600V AC (Full)
    32 amp @ 600V AC (Resistive)    		6002 hp @ 120V AC
    3 hp @ 240V AC    		7 1/2 hp @ 240V AC
    15 hp @ 480V AC
    15 hp @ 600V AC    		3.2"1.8"3.2"70255K341000000
    12120V AC6.5 VA17 amp @ 600V AC (Full)
    32 amp @ 600V AC (Resistive)    		6001 hp @ 120V AC
    3 hp @ 240V AC    		5 hp @ 240V AC
    10 hp @ 480V AC
    15 hp @ 600V AC    		3.2"1.8"3.2"70255K33200000
    12120V AC6.5 VA17 amp @ 600V AC (Full)
    32 amp @ 600V AC (Resistive)    		6002 hp @ 120V AC
    3 hp @ 240V AC    		7 1/2 hp @ 240V AC
    15 hp @ 480V AC
    15 hp @ 600V AC    		3.2"1.8"3.2"70255K342000000
    12240V AC6.5 VA17 amp @ 600V AC (Full)
    32 amp @ 600V AC (Resistive)    		6001 hp @ 120V AC
    3 hp @ 240V AC    		5 hp @ 240V AC
    10 hp @ 480V AC
    15 hp @ 600V AC    		3.2"1.8"3.2"70255K33300000
    12240V AC6.5 VA17 amp @ 600V AC (Full)
    32 amp @ 600V AC (Resistive)    		6002 hp @ 120V AC
    3 hp @ 240V AC    		7 1/2 hp @ 240V AC
    15 hp @ 480V AC
    15 hp @ 600V AC    		3.2"1.8"3.2"70255K343000000
    1224V DC5.4 W17 amp @ 600V AC (Full)
    32 amp @ 600V AC (Resistive)    		6001 hp @ 120V AC
    3 hp @ 240V AC    		5 hp @ 240V AC
    10 hp @ 480V AC
    15 hp @ 600V AC    		3.2"1.8"3.9"70255K43000000
    1224V DC5.4 W17 amp @ 600V AC (Full)
    32 amp @ 600V AC (Resistive)    		6002 hp @ 120V AC
    3 hp @ 240V AC    		7 1/2 hp @ 240V AC
    15 hp @ 480V AC
    15 hp @ 600V AC    		3.2"1.8"3.9"70255K44000000
     
    With 1 Auxiliary Contact—1 On
    1224V AC6.5 VA17 amp @ 600V AC (Full)
    32 amp @ 600V AC (Resistive)    		6001 hp @ 120V AC
    3 hp @ 240V AC    		5 hp @ 240V AC
    10 hp @ 480V AC
    15 hp @ 600V AC    		3.2"1.8"3.2"70255K36100000
    1224V AC6.5 VA17 amp @ 600V AC (Full)
    32 amp @ 600V AC (Resistive)    		6002 hp @ 120V AC
    3 hp @ 240V AC    		7 1/2 hp @ 240V AC
    15 hp @ 480V AC
    15 hp @ 600V AC    		3.2"1.8"3.2"70255K371000000
    12120V AC6.5 VA17 amp @ 600V AC (Full)
    32 amp @ 600V AC (Resistive)    		6001 hp @ 120V AC
    3 hp @ 240V AC    		5 hp @ 240V AC
    10 hp @ 480V AC
    15 hp @ 600V AC    		3.2"1.8"3.2"70255K36200000
    12120V AC6.5 VA17 amp @ 600V AC (Full)
    32 amp @ 600V AC (Resistive)    		6002 hp @ 120V AC
    3 hp @ 240V AC    		7 1/2 hp @ 240V AC
    15 hp @ 480V AC
    15 hp @ 600V AC    		3.2"1.8"3.2"70255K372000000
    12240V AC6.5 VA17 amp @ 600V AC (Full)
    32 amp @ 600V AC (Resistive)    		6001 hp @ 120V AC
    3 hp @ 240V AC    		5 hp @ 240V AC
    10 hp @ 480V AC
    15 hp @ 600V AC    		3.2"1.8"3.2"70255K36300000
    12240V AC6.5 VA17 amp @ 600V AC (Full)
    32 amp @ 600V AC (Resistive)    		6002 hp @ 120V AC
    3 hp @ 240V AC    		7 1/2 hp @ 240V AC
    15 hp @ 480V AC
    15 hp @ 600V AC    		3.2"1.8"3.2"70255K373000000
    1224V DC5.4 W17 amp @ 600V AC (Full)
    32 amp @ 600V AC (Resistive)    		6001 hp @ 120V AC
    3 hp @ 240V AC    		5 hp @ 240V AC
    10 hp @ 480V AC
    15 hp @ 600V AC    		3.2"1.8"3.9"70255K46000000
    1224V DC5.4 W17 amp @ 600V AC (Full)
    32 amp @ 600V AC (Resistive)    		6002 hp @ 120V AC
    3 hp @ 240V AC    		7 1/2 hp @ 240V AC
    15 hp @ 480V AC
    15 hp @ 600V AC    		3.2"1.8"3.9"70255K47000000
     
    4 Circuits Controlled with 4 Off—4PST-NO
    1224V AC6.5 VA17 amp @ 600V AC (Full)
    32 amp @ 600V AC (Resistive)    		6001 hp @ 120V AC
    3 hp @ 240V AC    		5 hp @ 240V AC
    10 hp @ 480V AC
    15 hp @ 600V AC    		3.2"1.8"3.2"70255K551000000
    1224V AC6.5 VA32 amp @ 600V AC (Full)
    55 amp @ 600V AC (Resistive)    		6003 hp @ 120V AC
    7 1/2 hp @ 240V AC    		15 hp @ 240V AC
    30 hp @ 480V AC
    30 hp @ 600V AC    		3.5"2.4"3.5"70255K271000000
    12120V AC6.5 VA17 amp @ 600V AC (Full)
    32 amp @ 600V AC (Resistive)    		6001 hp @ 120V AC
    3 hp @ 240V AC    		5 hp @ 240V AC
    10 hp @ 480V AC
    15 hp @ 600V AC    		3.2"1.8"3.2"70255K552000000
    12120V AC6.5 VA32 amp @ 600V AC (Full)
    55 amp @ 600V AC (Resistive)    		6003 hp @ 120V AC
    7 1/2 hp @ 240V AC    		15 hp @ 240V AC
    30 hp @ 480V AC
    30 hp @ 600V AC    		3.5"2.4"3.5"70255K272000000
    12240V AC6.5 VA17 amp @ 600V AC (Full)
    32 amp @ 600V AC (Resistive)    		6001 hp @ 120V AC
    3 hp @ 240V AC    		5 hp @ 240V AC
    10 hp @ 480V AC
    15 hp @ 600V AC    		3.2"1.8"3.2"70255K553000000
    12240V AC6.5 VA32 amp @ 600V AC (Full)
    55 amp @ 600V AC (Resistive)    		6003 hp @ 120V AC
    7 1/2 hp @ 240V AC    		15 hp @ 240V AC
    30 hp @ 480V AC
    30 hp @ 600V AC    		3.5"2.4"3.5"70255K273000000
    1224V DC5.4 W17 amp @ 600V AC (Full)
    32 amp @ 600V AC (Resistive)    		6001 hp @ 120V AC
    3 hp @ 240V AC    		5 hp @ 240V AC
    10 hp @ 480V AC
    15 hp @ 600V AC    		3.2"1.8"3.9"70255K49000000
    1224V DC5.4 W32 amp @ 600V AC (Full)
    55 amp @ 600V AC (Resistive)    		6003 hp @ 120V AC
    7 1/2 hp @ 240V AC    		15 hp @ 240V AC
    30 hp @ 480V AC
    30 hp @ 600V AC    		3.5"2.4"4.2"70255K38000000
     
    Accessories and Replacements for Relays
    Relay Contacts
    Image of Product. Front Mount. Front orientation. Relay Contacts. DIN-Rail Mount Touch-Safe Screw Terminal Relays.
    Image of Product. Side Mount. Front orientation. Relay Contacts. DIN-Rail Mount Touch-Safe Screw Terminal Relays.

    Front

    Mount

    Side Mount

    Relay contacts allow you to add a signaling device or control another relay. You can add one relay contact to all of these relays. For relays with 12 terminals, you can add two side-mount relay contacts.
    No. of Circuits
    Controlled
    For Relay
    Wd.
    Switch Starting
    Position
    Switch
    Designation
    Mounting
    Location
    Each
    21.8", 2.4"1 Off and 1 On
    		DPST-1NO/1NC
    		Front70255K14000000
    21.8", 2.4"1 Off and 1 On
    		DPST-1NO/1NC
    		Side70255K2600000
    Contact Blocks
    Image of Product. Front Mount. Front orientation. Contact Blocks. DIN-Rail Mount Touch-Safe Screw Terminal Relays.

    Front

    Mount

    Contact blocks allow you to add a signaling device or control another relay. You can add one contact block to all of these relays.
    No. of Circuits
    Controlled
    For Relay Wd.
    Switch Starting
    Position
    Switch
    Designation
    Mounting
    Location
    Each
    21.8", 2.2", 2.4"2 Off
    		DPST-NO
    		Front8728N12000000
    21.8", 2.2", 2.4"2 On
    		DPST-NC
    		Front8728N1100000
    41.8", 2.2", 2.4"1 Off and 3 On4PST-1NO/3NCFront8728N1500000
    41.8", 2.2", 2.4"2 Off and 2 On
    		4PST-2NO/2NC
    		Front8728N1600000
    41.8", 2.2", 2.4"3 Off and 1 On
    		4PST-3NO/1NC
    		Front8728N1700000
    41.8", 2.2", 2.4"4 Off
    		4PST-NO
    		Front8728N1400000
    41.8", 2.2", 2.4"4 On4PST-NCFront8728N1300000
    Replacement Relay Coils
    Image of Product. Front orientation. Relay Coils. DIN-Rail Mount Touch-Safe Screw Terminal Relays.
    Use replacement coils to swap out a broken coil or change the input voltage of a relay. They are only compatible with relays that have 12 terminals. The full load current of the relay must match the full load current range of the coil.
    For Switching Current
    (Load Type)
    Input Voltage,
    V AC
    Input Freq.,
    Hz
    Each
    9 amp to 17 amp (Full)24608727N11000000
    9 amp to 17 amp (Full)120608727N1200000
    9 amp to 17 amp (Full)240608727N1300000
    22 amp to 32 amp (Full)24608727N1400000
    22 amp to 32 amp (Full)120608727N1500000
    22 amp to 32 amp (Full)240608727N1600000

    Touch-Safe DIN-Rail Mount Infrequent-Cycle Relays

    Image of Product. Front orientation. Contains Annotated. Infrequent-Cycle Relays. Touch-Safe DIN-Rail Mount Infrequent-Cycle Relays, 12 Terminals.

    12 Terminals

    Operate equipment that cycles on and off from your control cabinet. Often called definite-purpose contactors, these relays meet UL 508 for use with air conditioning and heating. Mount them directly to 35 mm DIN rail (also known as DIN 3 rail) for fast installation. They have recessed terminals that prevent fingers and other objects from touching live circuits. You can wire the control circuit on either side of the relay, which helps you use less wire.
    Switching Current
    @ 600V AC, amp
    hp @
    Switching Voltage
    No. of
    Terminals
    Input
    Voltage
    Control
    Power
    Full
    Load
    Resistive
    Load
    Max. Switching
    Voltage, V AC
    Single Phase
    Three Phase
    Ht.
    Wd.
    Dp.
    Each
    Infrequent-Cycle Relays
     
    4 Circuits Controlled with 4 Off—4PST-NO
    1224V AC9 VA30326002 hp @ 120V AC
    5 hp @ 240V AC    		7 1/2 hp @ 240V AC
    15 hp @ 480V AC
    20 hp @ 600V AC    		3.2"1.8"3.2"9114T391000000
    12120V AC9 VA30326002 hp @ 120V AC
    5 hp @ 240V AC    		7 1/2 hp @ 240V AC
    15 hp @ 480V AC
    20 hp @ 600V AC    		3.2"1.8"3.2"9114T39200000
    12240V AC9 VA30326002 hp @ 120V AC
    5 hp @ 240V AC    		7 1/2 hp @ 240V AC
    15 hp @ 480V AC
    20 hp @ 600V AC    		3.2"1.8"3.2"9114T39300000
     
    Infrequent-Cycle Relays with 1 Off Auxiliary Contact Switch
     
    3 Circuits Controlled with 3 Off—3PST-NO
    1224V AC9 VA30326002 hp @ 120V AC
    5 hp @ 240V AC    		7 1/2 hp @ 240V AC
    15 hp @ 480V AC
    20 hp @ 600V AC    		3.2"1.8"3.2"9114T34100000
    12120V AC9 VA30326002 hp @ 120V AC
    5 hp @ 240V AC    		7 1/2 hp @ 240V AC
    15 hp @ 480V AC
    20 hp @ 600V AC    		3.2"1.8"3.2"9114T34200000
    12240V AC9 VA30326002 hp @ 120V AC
    5 hp @ 240V AC    		7 1/2 hp @ 240V AC
    15 hp @ 480V AC
    20 hp @ 600V AC    		3.2"1.8"3.2"9114T34300000
    1224V DC5.4 W30326002 hp @ 120V AC
    5 hp @ 240V AC    		7 1/2 hp @ 240V AC
    15 hp @ 480V AC
    20 hp @ 600V AC    		3.2"1.8"3.9"9114T44000000
     
    Accessories and Replacements for Infrequent-Cycle Relays
    Contact Blocks
    Image of Product. Front Mount. Front orientation. Contact Blocks. Front Mount.

    Front

    Mount

    Auxiliary contacts allow you to add a signaling device or control another relay.
    No. of Circuits
    Controlled
    For Relay Wd.
    Switch Starting
    Position
    Switch
    Designation
    Mounting
    Location
    Each
    21.8", 2.2", 2.4"2 Off
    		DPST-NO
    		Front8728N12000000
    21.8", 2.2", 2.4"2 On
    		DPST-NC
    		Front8728N1100000
    41.8", 2.2", 2.4"1 Off and 3 On4PST-1NO/3NCFront8728N1500000
    41.8", 2.2", 2.4"2 Off and 2 On
    		4PST-2NO/2NC
    		Front8728N1600000
    41.8", 2.2", 2.4"3 Off and 1 On
    		4PST-3NO/1NC
    		Front8728N1700000
    41.8", 2.2", 2.4"4 Off
    		4PST-NO
    		Front8728N1400000
    41.8", 2.2", 2.4"4 On4PST-NCFront8728N1300000
    Relay Contacts
    Image of Product. Front Mount. Front orientation. Relay Contacts. Front Mount.
    Image of Product. Side Mount. Front orientation. Relay Contacts. Side Mount.

    Front

    Mount

    Side Mount

    Auxiliary contacts allow you to add a signaling device or control another relay.
    No. of Circuits
    Controlled
    For Relay
    Wd.
    Switch Starting
    Position
    Switch
    Designation
    Mounting
    Location
    Each
    21.8", 2.4"1 Off and 1 On
    		DPST-1NO/1NC
    		Front70255K14000000
    21.8", 2.4"1 Off and 1 On
    		DPST-1NO/1NC
    		Side70255K2600000
    Replacement Relay Coils
    Image of Product. Front orientation. Relay Coils.
    Use replacement coils to swap out a broken coil or change the input voltage of a relay. The full load current of the relay must match the full load current range of the coil.
    For Switching Current
    (Load Type)
    Input Voltage,
    V AC
    Input Freq.,
    Hz
    Each
    9 amp to 17 amp (Full)24608727N11000000
    9 amp to 17 amp (Full)120608727N1200000
    9 amp to 17 amp (Full)240608727N1300000
    back to top