McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    20 Products

    DIN-Rail Mount Touch-Safe Screw Terminal Relays

    Image of Product. Front orientation. Contains Annotated. Relays. DIN-Rail Mount Touch-Safe Screw Terminal Relays.
    Quickly and safely mount these relays on 35 mm DIN rail (also known as DIN 3). IP20 rated, they have recessed terminals that prevent fingers and other objects from touching live circuits.
    4 Circuits Controlled—Relays that control 3 and 4 circuits are built to IEC dimensional standards and are often called IEC contactors.
    12 Terminals—Relays with 12 terminals let you attach the control circuit onto the side that works best for your setup, which reduces the amount of wire you need.
    hp @
    Switching Voltage
    No. of
    Terminals
    Input
    Voltage
    Control
    Power
    Switching Current @
    Voltage (Load Type)
    Max. Switching
    Voltage, V AC
    Single Phase
    Three Phase
    Ht.
    Wd.
    Dp.
    Each
    4 Circuits Controlled with 4 Off—4PST-NO
    1224V AC6.5 VA32 amp @ 600V AC (Full)
    55 amp @ 600V AC (Resistive)    		6003 hp @ 120V AC
    7 1/2 hp @ 240V AC    		15 hp @ 240V AC
    30 hp @ 480V AC
    30 hp @ 600V AC    		3.5"2.4"3.5"70255K2710000000
    12120V AC6.5 VA32 amp @ 600V AC (Full)
    55 amp @ 600V AC (Resistive)    		6003 hp @ 120V AC
    7 1/2 hp @ 240V AC    		15 hp @ 240V AC
    30 hp @ 480V AC
    30 hp @ 600V AC    		3.5"2.4"3.5"70255K272000000
    12240V AC6.5 VA32 amp @ 600V AC (Full)
    55 amp @ 600V AC (Resistive)    		6003 hp @ 120V AC
    7 1/2 hp @ 240V AC    		15 hp @ 240V AC
    30 hp @ 480V AC
    30 hp @ 600V AC    		3.5"2.4"3.5"70255K273000000
    1224V DC5.4 W32 amp @ 600V AC (Full)
    55 amp @ 600V AC (Resistive)    		6003 hp @ 120V AC
    7 1/2 hp @ 240V AC    		15 hp @ 240V AC
    30 hp @ 480V AC
    30 hp @ 600V AC    		3.5"2.4"4.2"70255K38000000
     
    Accessories and Replacements for Relays
    Relay Contacts
    Image of Product. Front Mount. Front orientation. Relay Contacts. DIN-Rail Mount Touch-Safe Screw Terminal Relays.
    Image of Product. Side Mount. Front orientation. Relay Contacts. DIN-Rail Mount Touch-Safe Screw Terminal Relays.

    Front

    Mount

    Side Mount

    Relay contacts allow you to add a signaling device or control another relay. You can add one relay contact to all of these relays. For relays with 12 terminals, you can add two side-mount relay contacts.
    No. of Circuits
    Controlled
    For Relay
    Wd.
    Switch Starting
    Position
    Switch
    Designation
    Mounting
    Location
    Each
    21.8", 2.4"1 Off and 1 On
    		DPST-1NO/1NC
    		Front70255K14000000
    21.8", 2.4"1 Off and 1 On
    		DPST-1NO/1NC
    		Side70255K2600000
    Contact Blocks
    Image of Product. Front Mount. Front orientation. Contact Blocks. DIN-Rail Mount Touch-Safe Screw Terminal Relays.

    Front

    Mount

    Contact blocks allow you to add a signaling device or control another relay. You can add one contact block to all of these relays.
    No. of Circuits
    Controlled
    For Relay Wd.
    Switch Starting
    Position
    Switch
    Designation
    Mounting
    Location
    Each
    21.8", 2.2", 2.4"2 Off
    		DPST-NO
    		Front8728N12000000
    21.8", 2.2", 2.4"2 On
    		DPST-NC
    		Front8728N1100000
    41.8", 2.2", 2.4"1 Off and 3 On4PST-1NO/3NCFront8728N1500000
    41.8", 2.2", 2.4"2 Off and 2 On
    		4PST-2NO/2NC
    		Front8728N1600000
    41.8", 2.2", 2.4"3 Off and 1 On
    		4PST-3NO/1NC
    		Front8728N1700000
    41.8", 2.2", 2.4"4 Off
    		4PST-NO
    		Front8728N1400000
    41.8", 2.2", 2.4"4 On4PST-NCFront8728N1300000
    Replacement Relay Coils
    Image of Product. Front orientation. Relay Coils. DIN-Rail Mount Touch-Safe Screw Terminal Relays.
    Use replacement coils to swap out a broken coil or change the input voltage of a relay. They are only compatible with relays that have 12 terminals. The full load current of the relay must match the full load current range of the coil.
    For Switching Current
    (Load Type)
    Input Voltage,
    V AC
    Input Freq.,
    Hz
    Each
    22 amp to 32 amp (Full)24608727N14000000
    22 amp to 32 amp (Full)120608727N1500000
    22 amp to 32 amp (Full)240608727N1600000

    Touch-Safe DIN-Rail Mount Infrequent-Cycle Relays

    Image of Product. Front orientation. Contains Annotated. Infrequent-Cycle Relays. Touch-Safe DIN-Rail Mount Infrequent-Cycle Relays, 10 Terminals.

    10 Terminals

    Operate equipment that cycles on and off from your control cabinet. Often called definite-purpose contactors, these relays meet UL 508 for use with air conditioning and heating. Mount them directly to 35 mm DIN rail (also known as DIN 3 rail) for fast installation. They have recessed terminals that prevent fingers and other objects from touching live circuits. You can wire the control circuit on either side of the relay, which helps you use less wire.
    Switching Current
    @ 600V AC, amp
    hp @
    Switching Voltage
    No. of
    Terminals
    Input
    Voltage
    Control
    Power
    Full
    Load
    Resistive
    Load
    Max. Switching
    Voltage, V AC
    Single Phase
    Three Phase
    Ht.
    Wd.
    Dp.
    Each
     
    3 Circuits Controlled with 3 Off—3PST-NO
    1024V AC9 VA50556003 hp @ 120V AC
    10 hp @ 240V AC    		15 hp @ 240V AC
    30 hp @ 480V AC
    40 hp @ 600V AC    		3.5"1.8"3.5"9114T3610000000
    10120V AC9 VA50556003 hp @ 120V AC
    10 hp @ 240V AC    		15 hp @ 240V AC
    30 hp @ 480V AC
    40 hp @ 600V AC    		3.5"1.8"3.5"9114T362000000
    10240V AC9 VA50556003 hp @ 120V AC
    10 hp @ 240V AC    		15 hp @ 240V AC
    30 hp @ 480V AC
    40 hp @ 600V AC    		3.5"1.8"3.5"9114T363000000
    1024V DC5.4 W50556003 hp @ 120V AC
    10 hp @ 240V AC    		15 hp @ 240V AC
    30 hp @ 480V AC
    40 hp @ 600V AC    		3.5"1.8"4.2"9114T46000000
     
    Accessories and Replacements for Infrequent-Cycle Relays
    Contact Blocks
    Image of Product. Front Mount. Front orientation. Contact Blocks. Front Mount.

    Front

    Mount

    Auxiliary contacts allow you to add a signaling device or control another relay.
    No. of Circuits
    Controlled
    For Relay Wd.
    Switch Starting
    Position
    Switch
    Designation
    Mounting
    Location
    Each
    21.8", 2.2", 2.4"2 Off
    		DPST-NO
    		Front8728N12000000
    21.8", 2.2", 2.4"2 On
    		DPST-NC
    		Front8728N1100000
    41.8", 2.2", 2.4"1 Off and 3 On4PST-1NO/3NCFront8728N1500000
    41.8", 2.2", 2.4"2 Off and 2 On
    		4PST-2NO/2NC
    		Front8728N1600000
    41.8", 2.2", 2.4"3 Off and 1 On
    		4PST-3NO/1NC
    		Front8728N1700000
    41.8", 2.2", 2.4"4 Off
    		4PST-NO
    		Front8728N1400000
    41.8", 2.2", 2.4"4 On4PST-NCFront8728N1300000
    Relay Contacts
    Image of Product. Front Mount. Front orientation. Relay Contacts. Front Mount.
    Image of Product. Side Mount. Front orientation. Relay Contacts. Side Mount.

    Front

    Mount

    Side Mount

    Auxiliary contacts allow you to add a signaling device or control another relay.
    No. of Circuits
    Controlled
    For Relay
    Wd.
    Switch Starting
    Position
    Switch
    Designation
    Mounting
    Location
    Each
    21.8", 2.4"1 Off and 1 On
    		DPST-1NO/1NC
    		Front70255K14000000
    21.8", 2.4"1 Off and 1 On
    		DPST-1NO/1NC
    		Side70255K2600000
    Replacement Relay Coils
    Image of Product. Front orientation. Relay Coils.
    Use replacement coils to swap out a broken coil or change the input voltage of a relay. The full load current of the relay must match the full load current range of the coil.
    For Switching Current
    (Load Type)
    Input Voltage,
    V AC
    Input Freq.,
    Hz
    Each
    22 amp to 32 amp (Full)24608727N14000000
    22 amp to 32 amp (Full)120608727N1500000
    22 amp to 32 amp (Full)240608727N1600000
    back to top