Often used in large, open workspaces, these switches can be wired on opposite ends of the room to control lights on the same circuit. With a protruding switch, they’re easily flipped on and off. These switches fit standard wall plates (not included).

Control equipment with high currents such as landscape lighting, pumps, and heaters. Program these switches to turn a device on and off at a set time and day. Position trippers around the clock dial to set on and off times.

Switch lights on and off no matter the forecast. NEMA 3R rated, these switches have a gasket that blocks out weather. They are rocker switches, so they protrude less off your wall than other switches.

Also known as three-way switches, these are often used in large, open workspaces and can be wired on opposite ends of the room to control lights on the same circuit. They work in pairs to control lights from two different locations. Actuate the switch by pressing on the wide, flat area. With a slim, low-profile design, they protrude less than toggle switches. All fit standard wall plates (not included).

Similar to a seesaw, these switches have an actuator that pivots when pressed to turn them on or off. They’re often used to control lighting, but they also work with AC motor loads up to 80% of the current rating. All fit standard wall plates (not included) and won’t stick out from your wall as much as toggle light switches.

Control multiple lights in the same footprint a standard light switch fits in.

Smaller than standard snap-acting switches, these switches trigger actions in tight spaces. They’re used in components as small as computer mice and engine restart switches. They open and close circuits faster than other switches, preventing contacts from sticking by reducing the time that they're near one another. These switches also minimize the chance of arcing, so electricity won’t jump across contacts.

Prevent accidental activation—these switches require a key to turn lights on and off. They’re keyed alike, so all switches actuate with the same key. They also work with AC motor loads up to 80% of the current rating. All fit standard wall plates (not included).

Also known as three-way switches, these are often used in large, open workspaces and can be wired on opposite ends of the room to control lights on the same circuit. They work in pairs to control lights from two different locations. To prevent accidental activation, they require a key to turn lights on and off. They’re keyed alike, so all switches actuate with the same key. They also work with AC motor loads up to 80% of the current rating. All fit standard wall plates (not included).

Control multiple lights in the same footprint a standard light switch fits in. The low-profile design of these rocker switches protrudes less than other switches.

Secure sensitive lighting equipment; these switches have a round key that is difficult to duplicate. The key is required to turn lights on and off. They’re keyed alike, so all switches actuate with the same key. They also work with AC motor loads up to 80% of the current rating.

A NEMA 4X enclosure protects these relays from washdowns, dirt, and corrosion. It also keeps terminals from being bumped accidentally, so you can mount these relays near working areas. Hardwire to your equipment with the wire leads.

An enclosure covers the terminals on these relays to help prevent damage from dust or accidental bumps. They have an LED indicator, so you can quickly see what switching position your relay is in. Hardwire them to your equipment with the included wire leads. Rated NEMA 1, these relays are intended for indoor use only.