Suitable for areas with space limitations, these switches have a low profile and a small footprint. They lay flat or mount to a wall. Typically used in start/stop and door opening applications, switches can also be placed underneath objects to alert when the object is removed. All have a sealed housing that resists water and alcohols (not suitable for continuous contact).

Prevent accidental activation and limit access—these switches require a key to turn circuits on or off. All fit into a standard panel cutout.

With a round key that is difficult to duplicate, these switches provide a higher degree of security than standard key switches.

Prevent automatic doors from closing on a person or an object—these switches immediately turn machinery off when actuated with minimal force. Combine with a controller (sold separately) to create a self-monitoring system that also shuts off machinery when a fault is detected. They’re sensitive along their entire length and often used to signal when an overhead door closes or when an item reaches the end of a conveyor. The attached mounting channel can be mounted to a door or flat surface. Punch or drill holes into the channel to match an existing hole pattern or create a new mounting pattern. Switches are rated IP65 for protection from washdowns.

Minimize false triggers—these switches require 10 lbs. of actuation force in order to shut off machinery immediately. Combine with a controller (sold separately) to create a self-monitoring system that also shuts off machinery when a fault is detected. They’re sensitive along their entire length and often used to signal when an overhead door closes or when an item reaches the end of a conveyor. The attached mounting channel can be mounted to a door or flat surface. Punch or drill holes into the channel to match an existing hole pattern or create a new mounting pattern. Switches are rated IP65 for protection from washdowns.