McMaster-Carr logo
    Filter by
    Mount Movement
    System of Measurement
    Base Shape
    Hex Nut Material
    Thread Type
    Industrial Info Compare
    Cushion Material
    Swivel Range of Motion
    Minimum Temperature
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    1,099 Products

    Swivel Leveling Mounts with Threaded Stud
    3D CAD models available

    Image of Product. Front orientation. Leveling Mounts. Swivel Leveling Mounts with Threaded Stud, Without Cushion.

    Without Cushion

    Image of Product. Front orientation. Leveling Mounts. Swivel Leveling Mounts with Threaded Stud, With Cushion.

    With Cushion

    Keep equipment level on slightly sloped and pitted floors with mounts that have a ball-and-socket joint in the base. For mounting versatility, you can install them in either threaded holes or unthreaded through holes at the bottom of equipment.
    Nickel-Plated Steel Base—With a shiny appearance, these mounts create a finished look. They're best for dry environments since the nickel plating offers minimal corrosion resistance.
    Zinc Yellow-Chromate-Plated Steel Base—More corrosion resistant than nickel-plated steel, these mounts are suitable for damp environments. However, they won’t hold up to chemical cleaners, high-pressure washdowns, and other harsh conditions like stainless steel can.
    Black-Oxide Steel Base—With a matte black appearance, these mounts create a finished look. They offer minimal corrosion resistance, so they're best for dry environments.
    303 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.
    316 Stainless Steel Base—Our most corrosion-resistant metal mounts, these hold up in just about any environment. They won’t degrade or become pitted, even when exposed to harsh cleaners and chemicals.
    Plastic Base—These mounts are economical yet resistant to grease, oil, and chemicals that pool on the floor. Often used on small, lightweight machines, they have about 25% the capacity of similarly sized metal mounts.
    Rubber Cushion—A cushion under the base grips surfaces so vibrating equipment doesn't slide. It also protects floors from scrapes and gouges.
    Without Cushion
    With Rubber Cushion
    Thread Size
    Thread
    Lg.
    Swivel Range
    of Motion
    Base
    Dia.
    Cap. per
    Mount
    Overall
    Ht.
    Each
    Cap. per
    Mount
    Overall
    Ht.
    Each
    Nickel-Plated Steel Base and Stud
    10-32
    1"7.5°3/4"700 lb.1 1/2"000000000000525 lb.1 5/8"0000000000000
    10-32
    2"7.5°3/4"700 lb.2 1/2"00000000000525 lb.2 5/8"000000000000
    1/4"-20
    1 1/4"7.5°1"1,000 lb.1 15/16"00000000000750 lb.2 1/16"000000000000
    1/4"-20
    2 1/2"7.5°1"1,000 lb.3 3/16"00000000000750 lb.3 5/16"000000000000
    1/4"-28
    1 1/4"7.5°1"775 lb.1 15/16"000000000000580 lb.2 1/16"000000000000
    5/16"-18
    2"7.5°1 1/4"2,500 lb.2 7/8"000000000001,875 lb.3"000000000000
    5/16"-18
    4"7.5°1 1/4"2,500 lb.4 7/8"000000000001,875 lb.5"000000000000
    3/8"-16
    2"7.5°1 1/4"3,750 lb.2 7/8"000000000002,800 lb.3"000000000000
    3/8"-16
    4"7.5°1 1/4"3,750 lb.4 7/8"000000000002,800 lb.5"0000000000000
    3/8"-24
    2"7.5°1 1/4"3,300 lb.2 7/8"0000000000002,475 lb.3"0000000000000
    1/2"-13
    2"7.5°1 7/8"5,000 lb.3 1/8"0000000000003,750 lb.3 1/4"0000000000000
    1/2"-13
    4"7.5°1 7/8"5,000 lb.5 1/8"0000000000003,750 lb.5 1/4"0000000000000
    1/2"-13
    6"7.5°1 7/8"5,000 lb.7 1/8"00000000000003,750 lb.7 1/4"0000000000000
    1/2"-20
    2"7.5°1 7/8"4,000 lb.3 1/8"00000000000003,000 lb.3 1/4"0000000000000
    5/8"-11
    2"7.5°2 1/2"6,000 lb.3 1/4"0000000000004,500 lb.3 3/8"0000000000000
    5/8"-11
    4"7.5°2 1/2"6,000 lb.5 1/4"0000000000004,500 lb.5 3/8"0000000000000
    5/8"-11
    6"7.5°2 1/2"6,000 lb.7 1/4"00000000000004,500 lb.7 3/8"0000000000000
    5/8"-18
    2"7.5°2 1/2"5,000 lb.3 1/4"00000000000003,750 lb.3 3/8"0000000000000
    3/4"-10
    2"7.5°3"7,400 lb.3 1/2"0000000000005,550 lb.3 5/8"0000000000000
    3/4"-10
    4"7.5°3"7,400 lb.5 1/2"0000000000005,550 lb.5 5/8"0000000000000
    3/4"-10
    6"7.5°3"7,400 lb.7 1/2"00000000000005,550 lb.7 5/8"0000000000000
    3/4"-16
    2"7.5°3"6,200 lb.3 1/2"00000000000004,650 lb.3 5/8"0000000000000
    7/8"-9
    4"7.5°4"15,000 lb.5 7/8"000000000000011,250 lb.6"0000000000000
    7/8"-14
    4"7.5°4"13,500 lb.5 7/8"000000000000010,100 lb.6"0000000000000
    1"-8
    3 1/2"7.5°4"20,000 lb.5 3/8"00000000000015,000 lb.5 1/2"0000000000000
    1"-8
    4 1/4"7.5°4"20,000 lb.6 1/8"000000000000015,000 lb.6 1/4"0000000000000
    1"-8
    6"7.5°4"20,000 lb.7 7/8"00000000000015,000 lb.8"0000000000000
    1"-8
    8"7.5°4"20,000 lb.9 7/8"00000000000015,000 lb.10"0000000000000
    1"-12
    3 1/2"7.5°4"18,000 lb.5 3/8"000000000000013,500 lb.5 1/2"0000000000000
    1 1/4"-7
    4"7.5°6"43,000 lb.6 3/4"0000000000000032,250 lb.6 7/8"00000000000000
    1 1/4"-7
    6"7.5°6"43,000 lb.8 3/4"0000000000000032,250 lb.8 7/8"00000000000000
    M6 × 1 mm25 mm7.5°19 mm690 lb.38 mm000000000000510 lb.41 mm000000000000
    M8 × 1.25 mm32 mm7.5°25 mm990 lb.49 mm000000000000740 lb.52 mm000000000000
    M10 × 1.5 mm51 mm7.5°32 mm3,700 lb.73 mm0000000000002,700 lb.76 mm000000000000
    M12 × 1.75 mm51 mm7.5°48 mm4,950 lb.79 mm00000000000003,700 lb.83 mm0000000000000
    M16 × 2 mm51 mm7.5°64 mm5,950 lb.83 mm00000000000004,500 lb.86 mm0000000000000
    M20 × 2.5 mm51 mm7.5°76 mm7,350 lb.89 mm00000000000005,500 lb.92 mm0000000000000
    M24 × 3 mm89 mm7.5°102 mm19,500 lb.137 mm000000000000014,500 lb.140 mm0000000000000
    M24 × 3 mm108 mm7.5°102 mm19,500 lb.156 mm000000000000014,500 lb.159 mm0000000000000
    M30 × 3.5 mm102 mm7.5°152 mm42,500 lb.172 mm0000000000000032,250 lb.175 mm00000000000000
    M30 × 3.5 mm152 mm7.5°152 mm42,500 lb.222 mm0000000000000032,250 lb.225 mm00000000000000
     
    Zinc Yellow-Chromate-Plated Steel Base and Stud
    10-32
    1"7.5°3/4"700 lb.1 1/2"00000000000525 lb.1 5/8"00000000000
    10-32
    2"7.5°3/4"700 lb.2 1/2"00000000000525 lb.2 5/8"000000000000
    1/4"-20
    1 1/4"7.5°1"1,000 lb.1 15/16"00000000000750 lb.2 1/16"00000000000
    1/4"-20
    2 1/2"7.5°1"1,000 lb.3 3/16"00000000000750 lb.3 5/16"000000000000
    1/4"-28
    1 1/4"7.5°1"775 lb.1 15/16"000000000000580 lb.2 1/16"000000000000
    5/16"-18
    2"7.5°1 1/4"2,500 lb.2 7/8"000000000001,875 lb.3"000000000000
    5/16"-18
    4"7.5°1 1/4"2,500 lb.4 7/8"000000000001,875 lb.5"000000000000
    3/8"-16
    2"7.5°1 1/4"3,750 lb.2 7/8"000000000002,800 lb.3"00000000000
    3/8"-16
    4"7.5°1 1/4"3,750 lb.4 7/8"000000000002,800 lb.5"0000000000000
    3/8"-24
    2"7.5°1 1/4"3,300 lb.2 7/8"00000000000002,475 lb.3"0000000000000
    1/2"-13
    2"7.5°1 7/8"5,000 lb.3 1/8"0000000000003,750 lb.3 1/4"000000000000
    1/2"-13
    4"7.5°1 7/8"5,000 lb.5 1/8"0000000000003,750 lb.5 1/4"0000000000000
    1/2"-13
    6"7.5°1 7/8"5,000 lb.7 1/8"00000000000003,750 lb.7 1/4"0000000000000
    1/2"-20
    2"7.5°1 7/8"4,000 lb.3 1/8"00000000000003,000 lb.3 1/4"0000000000000
    5/8"-11
    2"7.5°2 1/2"6,000 lb.3 1/4"0000000000004,500 lb.3 3/8"000000000000
    5/8"-11
    4"7.5°2 1/2"6,000 lb.5 1/4"0000000000004,500 lb.5 3/8"0000000000000
    5/8"-11
    6"7.5°2 1/2"6,000 lb.7 1/4"00000000000004,500 lb.7 3/8"0000000000000
    5/8"-18
    2"7.5°2 1/2"5,000 lb.3 1/4"00000000000003,750 lb.3 3/8"0000000000000
    3/4"-10
    2"7.5°3"7,400 lb.3 1/2"0000000000005,550 lb.3 5/8"000000000000
    3/4"-10
    4"7.5°3"7,400 lb.5 1/2"0000000000005,550 lb.5 5/8"0000000000000
    3/4"-10
    6"7.5°3"7,400 lb.7 1/2"00000000000005,550 lb.7 5/8"0000000000000
    3/4"-16
    2"7.5°3"6,200 lb.3 1/2"00000000000004,650 lb.3 5/8"0000000000000
    7/8"-9
    4"7.5°4"15,000 lb.5 7/8"000000000000011,250 lb.6"0000000000000
    7/8"-14
    4"7.5°4"13,500 lb.5 7/8"0000000000000______00
    1"-8
    3 1/2"7.5°4"20,000 lb.5 3/8"00000000000015,000 lb.5 1/2"000000000000
    1"-8
    6"7.5°4"20,000 lb.7 7/8"00000000000015,000 lb.8"0000000000000
    1"-8
    8"7.5°4"20,000 lb.9 7/8"00000000000015,000 lb.10"0000000000000
    1"-12
    3 1/2"7.5°4"18,000 lb.5 3/8"0000000000000______00
    1 1/4"-7
    4"7.5°6"43,000 lb.6 3/4"0000000000000032,250 lb.6 7/8"00000000000000
    1 1/4"-7
    6"7.5°6"43,000 lb.8 3/4"00000000000000______00
    M6 × 1 mm25 mm7.5°19 mm690 lb.38 mm00000000000515 lb.41 mm00000000000
    M8 × 1.25 mm32 mm7.5°25 mm990 lb.49 mm00000000000750 lb.52 mm00000000000
    M10 × 1.5 mm51 mm7.5°32 mm3,740 lb.73 mm000000000002,795 lb.76 mm00000000000
    M12 × 1.75 mm51 mm7.5°48 mm4,950 lb.79 mm0000000000003,740 lb.83 mm000000000000
    M16 × 2 mm51 mm7.5°64 mm5,940 lb.83 mm0000000000004,500 lb.86 mm000000000000
    M20 × 2.5 mm51 mm7.5°76 mm7,370 lb.89 mm0000000000005,545 lb.92 mm000000000000
    M24 × 3 mm89 mm7.5°102 mm19,840 lb.137 mm00000000000014,990 lb.140 mm000000000000
    M24 × 3 mm108 mm7.5°102 mm19,840 lb.156 mm00000000000014,990 lb.159 mm000000000000
    M30 × 3.5 mm102 mm7.5°152 mm42,990 lb.172 mm000000000000032,295 lb.175 mm0000000000000
    M30 × 3.5 mm152 mm7.5°152 mm42,990 lb.222 mm000000000000032,295 lb.225 mm0000000000000
     
    Black-Oxide Steel Base and Zinc-Plated Steel Stud
    10-32
    1"7.5°3/4"700 lb.1 1/2"000000000000525 lb.1 5/8"000000000000
    10-32
    2"7.5°3/4"700 lb.2 1/2"000000000000525 lb.2 5/8"000000000000
    1/4"-20
    1 1/4"7.5°1"1,000 lb.1 15/16"000000000000750 lb.2 1/16"000000000000
    1/4"-20
    2 1/2"7.5°1"1,000 lb.3 3/16"000000000000750 lb.3 5/16"0000000000000
    1/4"-28
    1 1/4"7.5°1"775 lb.1 15/16"000000000000______00
    5/16"-18
    2"7.5°1 1/4"2,500 lb.2 7/8"0000000000001,875 lb.3"0000000000000
    5/16"-18
    4"7.5°1 1/4"2,500 lb.4 7/8"00000000000001,875 lb.5"0000000000000
    3/8"-16
    2"7.5°1 1/4"3,750 lb.2 7/8"00000000000002,800 lb.3"0000000000000
    3/8"-16
    4"7.5°1 1/4"3,750 lb.4 7/8"00000000000002,800 lb.5"0000000000000
    3/8"-24
    2"7.5°1 1/4"3,300 lb.2 7/8"00000000000002,475 lb.3"0000000000000
    1/2"-13
    2"7.5°1 7/8"5,000 lb.3 1/8"00000000000003,750 lb.3 1/4"0000000000000
    1/2"-13
    4"7.5°1 7/8"5,000 lb.5 1/8"00000000000003,750 lb.5 1/4"0000000000000
    1/2"-13
    6"7.5°1 7/8"5,000 lb.7 1/8"00000000000003,750 lb.7 1/4"0000000000000
    1/2"-20
    2"7.5°1 7/8"4,000 lb.3 1/8"00000000000003,000 lb.3 1/4"0000000000000
    5/8"-11
    2"7.5°2 1/2"6,000 lb.3 1/4"00000000000004,500 lb.3 3/8"0000000000000
    5/8"-11
    4"7.5°2 1/2"6,000 lb.5 1/4"00000000000004,500 lb.5 3/8"0000000000000
    5/8"-11
    6"7.5°2 1/2"6,000 lb.7 1/4"00000000000004,500 lb.7 3/8"0000000000000
    5/8"-18
    2"7.5°2 1/2"5,000 lb.3 1/4"00000000000003,750 lb.3 3/8"0000000000000
    3/4"-10
    2"7.5°3"7,400 lb.3 1/2"00000000000005,550 lb.3 5/8"0000000000000
    3/4"-10
    4"7.5°3"7,400 lb.5 1/2"00000000000005,550 lb.5 5/8"0000000000000
    3/4"-10
    6"7.5°3"7,400 lb.7 1/2"00000000000005,550 lb.7 5/8"0000000000000
    3/4"-16
    2"7.5°3"6,200 lb.3 1/2"0000000000000______00
    7/8"-9
    4"7.5°4"15,000 lb.5 7/8"000000000000011,250 lb.6"0000000000000
    7/8"-14
    4"7.5°4"13,500 lb.5 7/8"0000000000000______00
    1"-8
    3 1/2"7.5°4"20,000 lb.5 3/8"000000000000015,000 lb.5 1/2"0000000000000
    1"-8
    6"7.5°4"20,000 lb.7 7/8"000000000000015,000 lb.8"0000000000000
    1"-8
    8"7.5°4"20,000 lb.9 7/8"000000000000015,000 lb.10"0000000000000
    1"-12
    3 1/2"7.5°4"18,000 lb.5 3/8"0000000000000______00
    1 1/4"-7
    4"7.5°6"43,000 lb.6 3/4"0000000000000032,250 lb.6 7/8"00000000000000
    1 1/4"-7
    6"7.5°6"43,000 lb.8 3/4"00000000000000______00
     
    303 Stainless Steel Base and Stud
    10-32
    1"7.5°3/4"700 lb.1 1/2"000000000000525 lb.1 5/8"000000000000
    10-32
    2"7.5°3/4"700 lb.2 1/2"000000000000525 lb.2 5/8"000000000000
    1/4"-20
    1 1/4"7.5°1"1,000 lb.1 15/16"000000000000750 lb.2 1/16"000000000000
    1/4"-20
    2 1/2"7.5°1"1,000 lb.3 3/16"000000000000750 lb.3 5/16"000000000000
    1/4"-28
    1 1/4"7.5°1"775 lb.1 15/16"0000000000000580 lb.2 1/16"000000000000
    5/16"-18
    2"7.5°1 1/4"2,500 lb.2 7/8"0000000000001,875 lb.3"000000000000
    5/16"-18
    4"7.5°1 1/4"2,500 lb.4 7/8"0000000000001,875 lb.5"000000000000
    3/8"-16
    13/16"1 1/4"440 lb.1 7/16"000000000000085 lb.1 7/16"0000000000000
    3/8"-16
    13/16"1 9/16"700 lb.1 7/16"0000000000000175 lb.1 7/16"0000000000000
    3/8"-16
    13/16"2"790 lb.1 1/2"0000000000000220 lb.1 1/2"0000000000000
    3/8"-16
    2"7.5°1 1/4"3,750 lb.2 7/8"0000000000002,800 lb.3"000000000000
    3/8"-16
    4"7.5°1 1/4"3,750 lb.4 7/8"0000000000002,800 lb.5"000000000000
    3/8"-24
    2"7.5°1 1/4"3,300 lb.2 7/8"00000000000002,475 lb.3"000000000000
    1/2"-13
    2"7.5°1 7/8"5,000 lb.3 1/8"0000000000003,750 lb.3 1/4"000000000000
    1/2"-13
    4"7.5°1 7/8"5,000 lb.5 1/8"0000000000003,750 lb.5 1/4"000000000000
    1/2"-13
    6"7.5°1 7/8"5,000 lb.7 1/8"0000000000000______00
    1/2"-20
    2"7.5°1 7/8"4,000 lb.3 1/8"00000000000003,000 lb.3 1/4"000000000000
    5/8"-11
    2"7.5°2 1/2"6,000 lb.3 1/4"0000000000004,500 lb.3 3/8"000000000000
    5/8"-11
    4"7.5°2 1/2"6,000 lb.5 1/4"0000000000004,500 lb.5 3/8"000000000000
    5/8"-11
    6"7.5°2 1/2"6,000 lb.7 1/4"0000000000000______00
    5/8"-18
    2"7.5°2 1/2"5,000 lb.3 1/4"00000000000003,750 lb.3 3/8"000000000000
    3/4"-10
    2"7.5°3"7,400 lb.3 1/2"0000000000005,550 lb.3 5/8"000000000000
    3/4"-10
    4"7.5°3"7,400 lb.5 1/2"0000000000005,550 lb.5 5/8"0000000000000
    3/4"-10
    6"7.5°3"7,400 lb.7 1/2"0000000000000______00
    3/4"-16
    2"7.5°3"6,200 lb.3 1/2"00000000000004,650 lb.3 5/8"000000000000
    7/8"-9
    4"7.5°4"15,000 lb.5 7/8"0000000000000011,250 lb.6"0000000000000
    7/8"-14
    4"7.5°4"13,500 lb.5 7/8"0000000000000010,100 lb.6"0000000000000
    1"-8
    3 1/2"7.5°4"20,000 lb.5 3/8"00000000000015,000 lb.5 1/2"0000000000000
    1"-8
    4 1/4"7.5°4"______0015,000 lb.6 1/4"0000000000000
    1"-8
    4 1/2"7.5°4"20,000 lb.6 1/8"00000000000000______00
    1"-8
    6"7.5°4"20,000 lb.7 7/8"000000000000015,000 lb.8"0000000000000
    1"-8
    8"7.5°4"20,000 lb.9 7/8"000000000000015,000 lb.10"0000000000000
    1"-12
    3 1/2"7.5°4"18,000 lb.5 3/8"0000000000000013,500 lb.5 1/2"0000000000000
    1 1/4"-7
    4"7.5°6"43,000 lb.6 3/4"0000000000000032,200 lb.6 7/8"0000000000000
    1 1/4"-7
    6"7.5°6"43,000 lb.8 3/4"0000000000000032,200 lb.8 7/8"0000000000000
    M6 × 1 mm25 mm7.5°19 mm690 lb.38 mm000000000000510 lb.41 mm0000000000000
    M8 × 1.25 mm32 mm7.5°25 mm990 lb.49 mm000000000000740 lb.52 mm0000000000000
    M10 × 1.5 mm51 mm7.5°32 mm3,740 lb.73 mm0000000000002,790 lb.76 mm0000000000000
    M12 × 1.75 mm51 mm7.5°48 mm4,950 lb.79 mm0000000000003,740 lb.83 mm0000000000000
    M16 × 2 mm51 mm7.5°64 mm5,940 lb.83 mm0000000000004,500 lb.86 mm0000000000000
    M20 × 2.5 mm51 mm7.5°76 mm7,370 lb.89 mm0000000000005,550 lb.92 mm00000000000000
    M24 × 3 mm89 mm7.5°102 mm19,800 lb.137 mm00000000000014,900 lb.140 mm00000000000000
    M24 × 3 mm108 mm7.5°102 mm19,800 lb.156 mm000000000000014,900 lb.159 mm00000000000000
    M30 × 3.5 mm102 mm7.5°152 mm42,000 lb.172 mm000000000000032,200 lb.175 mm00000000000000
    M30 × 3.5 mm152 mm7.5°152 mm42,000 lb.222 mm000000000000032,200 lb.225 mm00000000000000
     
    316 Stainless Steel Base and Stud
    10-32
    1"7.5°3/4"700 lb.1 1/2"0000000000000______00
    10-32
    2"7.5°3/4"700 lb.2 1/2"0000000000000______00
    1/4"-20
    1 1/4"7.5°1"1,000 lb.1 15/16"0000000000000______00
    1/4"-20
    2 1/2"7.5°1"1,000 lb.3 3/16"0000000000000______00
    5/16"-18
    2"7.5°1 1/4"2,500 lb.2 7/8"0000000000000______00
    5/16"-18
    4"7.5°1 1/4"2,500 lb.4 7/8"0000000000000______00
    3/8"-16
    2"7.5°1 1/4"3,750 lb.2 7/8"0000000000000______00
    3/8"-16
    4"7.5°1 1/4"3,750 lb.4 7/8"0000000000000______00
    1/2"-13
    2"7.5°1 7/8"5,000 lb.3 1/8"0000000000000______00
    1/2"-13
    4"7.5°1 7/8"5,000 lb.5 1/8"0000000000000______00
    1/2"-13
    6"7.5°1 7/8"5,000 lb.7 1/8"0000000000000______00
    1/2"-20
    2"7.5°1 7/8"4,000 lb.3 1/8"0000000000000______00
    5/8"-11
    2"7.5°2 1/2"6,000 lb.3 1/4"0000000000000______00
    5/8"-11
    4"7.5°2 1/2"6,000 lb.5 1/4"0000000000000______00
    5/8"-11
    6"7.5°2 1/2"6,000 lb.7 1/4"0000000000000______00
    3/4"-10
    2"7.5°3"7,400 lb.3 1/2"00000000000000______00
    3/4"-10
    4"7.5°3"7,400 lb.5 1/2"00000000000000______00
    3/4"-10
    6"7.5°3"7,400 lb.7 1/2"00000000000000______00
    1"-8
    3 1/2"7.5°4"20,000 lb.5 3/8"00000000000000______00
    1"-8
    6"7.5°4"20,000 lb.7 7/8"00000000000000______00
    1"-8
    8"7.5°4"20,000 lb.9 7/8"00000000000000______00
    M6 × 1 mm25 mm7.5°19 mm690 lb.38 mm000000000000______00
    M8 × 1.25 mm32 mm7.5°25 mm990 lb.49 mm000000000000______00
    M10 × 1.5 mm51 mm7.5°32 mm3,740 lb.73 mm000000000000______00
    M12 × 1.75 mm51 mm7.5°48 mm4,950 lb.79 mm000000000000______00
    M16 × 2 mm51 mm7.5°64 mm5,940 lb.83 mm0000000000000______00
    M20 × 2.5 mm51 mm7.5°76 mm7,370 lb.89 mm0000000000000______00
    M24 × 3 mm89 mm7.5°102 mm19,800 lb.137 mm0000000000000______00
     
    Plastic Base and Zinc-Plated Steel Stud
    10-32
    1"7.5°3/4"150 lb.1 1/2"00000000000150 lb.1 5/8"000000000000
    10-32
    2"7.5°3/4"150 lb.2 1/2"000000000000150 lb.2 5/8"000000000000
    1/4"-20
    1 1/4"7.5°1"200 lb.1 15/16"00000000000200 lb.2 1/16"000000000000
    1/4"-20
    2 1/2"7.5°1"200 lb.3 3/16"000000000000200 lb.3 5/16"000000000000
    1/4"-28
    1 1/4"7.5°1"200 lb.1 15/16"000000000000______00
    5/16"-18
    2"7.5°1 1/4"250 lb.2 7/8"000000000000250 lb.3"000000000000
    5/16"-18
    4"7.5°1 1/4"250 lb.4 7/8"000000000000250 lb.5"000000000000
    3/8"-16
    2"7.5°1 1/4"300 lb.2 7/8"00000000000300 lb.3"000000000000
    3/8"-16
    4"7.5°1 1/4"300 lb.4 7/8"000000000000300 lb.5"0000000000000
    3/8"-24
    2"7.5°1 1/4"250 lb.2 7/8"000000000000250 lb.3"0000000000000
    1/2"-13
    2"7.5°1 7/8"700 lb.3 1/8"000000000000700 lb.3 1/4"0000000000000
    1/2"-13
    4"7.5°1 7/8"700 lb.5 1/8"0000000000000700 lb.5 1/4"0000000000000
    1/2"-13
    6"7.5°1 7/8"700 lb.7 1/8"0000000000000700 lb.7 1/4"0000000000000
    1/2"-20
    2"7.5°1 7/8"625 lb.3 1/8"0000000000000625 lb.3 1/4"0000000000000
    5/8"-11
    2"7.5°2 1/2"1,200 lb.3 1/4"0000000000001,200 lb.3 3/8"0000000000000
    5/8"-11
    4"7.5°2 1/2"1,200 lb.5 1/4"00000000000001,200 lb.5 3/8"0000000000000
    5/8"-11
    6"7.5°2 1/2"1,200 lb.7 1/4"00000000000001,200 lb.7 3/8"0000000000000
    5/8"-18
    2"7.5°2 1/2"1,100 lb.3 1/4"00000000000001,100 lb.3 3/8"0000000000000
    3/4"-10
    2"7.5°3"1,800 lb.3 1/2"0000000000001,800 lb.3 5/8"0000000000000
    3/4"-10
    4"7.5°3"1,800 lb.5 1/2"00000000000001,800 lb.5 5/8"0000000000000
    3/4"-10
    6"7.5°3"1,800 lb.7 1/2"00000000000001,800 lb.7 5/8"0000000000000
    3/4"-16
    2"7.5°3"1,650 lb.3 1/2"0000000000000______00
    7/8"-9
    4"7.5°4"1,700 lb.5 7/8"00000000000001,700 lb.6"0000000000000
    7/8"-14
    4"7.5°4"1,950 lb.5 7/8"0000000000000______00
    1"-8
    3 1/2"7.5°4"2,400 lb.5 3/8"0000000000002,400 lb.5 1/2"0000000000000
    1"-8
    6"7.5°4"2,400 lb.7 7/8"00000000000002,400 lb.8"0000000000000
    1"-8
    8"7.5°