How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
About Rod Ends

More
Medium-Pressure Brass and Bronze Threaded Pipe Fittings
Choose these fittings when you need better strength than our low-pressure brass and bronze pipe fittings. They offer good corrosion resistance.
Fittings with intermittent swivel rotate 360° as needed to allow movement in a rigid metal piping system.
Oil-Embedded Ball Joint Rod Ends


An oil-embedded bronze insert slowly releases lubricant throughout the life of the rod end. These rod ends will require ongoing lubrication. Made of zinc-plated steel, they generally handle higher loads than stainless steel, aluminum, and nylon rod ends and offer moderate corrosion resistance.
Shank Thread Size | ID | Max. Ball Swivel | O'all Wd. | O'all Thick. | Shank Center Lg. | Shank Thread Lg. | Static Radial Load Cap., lbs. | Material | Choose a Shank Thread Direction | Each | |
10-32 | 3/16" | 13° | 5/8" | 5/16" | 1 1/4" | 3/4" | 1,150 | Zinc-Plated Carbon Steel | 0000000 | 00000 | |
1/4"-28 | 1/4" | 16° | 3/4" | 3/8" | 1 9/16" | 1" | 2,150 | Zinc-Plated Carbon Steel | 0000000 | 0000 | |
5/16"-24 | 5/16" | 14° | 7/8" | 7/16" | 1 7/8" | 1 1/4" | 2,750 | Zinc-Plated Carbon Steel | 0000000 | 0000 | |
3/8"-24 | 3/8" | 12° | 1" | 1/2" | 1 15/16" | 1 1/4" | 4,000 | Zinc-Plated Carbon Steel | 0000000 | 0000 | |
7/16"-20 | 7/16" | 14° | 1 1/8" | 9/16" | 2 1/8" | 1 3/8" | 4,200 | Zinc-Plated Carbon Steel | 00000000 | 0000 | |
1/2"-20 | 1/2" | 12° | 1 5/16" | 5/8" | 2 7/16" | 1 1/2" | 6,700 | Zinc-Plated Carbon Steel | 00000000 | 00000 | |
5/8"-18 | 5/8" | 16° | 1 1/2" | 3/4" | 2 5/8" | 1 5/8" | 7,400 | Zinc-Plated Carbon Steel | 00000000 | 00000 | |
3/4"-16 | 3/4" | 14° | 1 3/4" | 7/8" | 2 7/8" | 1 3/4" | 11,550 | Zinc-Plated Carbon Steel | 0000000 | 00000 |
Internally Threaded Oil-Embedded Ball Joint Rod Ends


An oil-embedded bronze insert slowly releases lubricant throughout the life of the rod end. These rod ends will require ongoing lubrication. Made of zinc-plated steel, they generally handle higher loads than stainless steel, aluminum, and nylon rod ends and offer moderate corrosion resistance.
Shank Thread Size | ID | Max. Ball Swivel | O'all Wd. | O'all Thick. | Shank Center Lg. | Shank Thread Lg. | Static Radial Load Cap., lbs. | Material | Choose a Shank Thread Direction | Each | |
10-32 | 3/16" | 13° | 5/8" | 5/16" | 1 1/16" | 1/2" | 1,600 | Zinc-Plated Carbon Steel | 00000000 | 00000 | |
1/4"-28 | 1/4" | 16° | 3/4" | 3/8" | 1 5/16" | 11/16" | 2,500 | Zinc-Plated Carbon Steel | 00000000 | 0000 | |
5/16"-24 | 5/16" | 14° | 7/8" | 7/16" | 1 3/8" | 11/16" | 3,200 | Zinc-Plated Carbon Steel | 00000000 | 0000 | |
3/8"-24 | 3/8" | 12° | 1" | 1/2" | 1 5/8" | 13/16" | 3,950 | Zinc-Plated Carbon Steel | 00000000 | 0000 | |
7/16"-20 | 7/16" | 14° | 1 1/8" | 9/16" | 1 13/16" | 15/16" | 4,300 | Zinc-Plated Carbon Steel | 00000000 | 0000 | |
1/2"-20 | 1/2" | 12° | 1 5/16" | 5/8" | 2 1/8" | 1 1/16" | 6,700 | Zinc-Plated Carbon Steel | 00000000 | 00000 | |
5/8"-18 | 5/8" | 16° | 1 1/2" | 3/4" | 2 1/2" | 1 3/8" | 7,400 | Zinc-Plated Carbon Steel | 00000000 | 00000 | |
3/4"-16 | 3/4" | 14° | 1 3/4" | 7/8" | 2 7/8" | 1 9/16" | 11,550 | Zinc-Plated Carbon Steel | 0000000 | 00000 |
Oil-Embedded Ball Joint Rod Ends with Grease Fitting


An oil-embedded bronze insert slowly releases lubricant to the rod end. Relubrication is recommended but not required. Connect your grease gun to the fitting to relubricate. Made of zinc-plated steel, these rod ends generally handle higher loads than stainless steel, aluminum, and nylon rod ends and offer moderate corrosion resistance.
Shank Thread Size | ID, mm | Max. Ball Swivel | O'all Wd., mm | O'all Thick., mm | Shank Center Lg., mm | Shank Thread Lg., mm | Static Radial Load Cap., lbs. | Material | Choose a Shank Thread Direction | Each | |
M8 × 1.25 mm | 8 | 18° | 22 | 12 | 42 | 25 | 4,000 | Zinc-Plated Carbon Steel | 0000000 | 000000 | |
M10 × 1.5 mm | 10 | 17° | 27 | 14 | 48 | 29 | 6,250 | Zinc-Plated Carbon Steel | 0000000 | 00000 | |
M12 × 1.75 mm | 12 | 17° | 30 | 16 | 54 | 33 | 7,750 | Zinc-Plated Carbon Steel | 0000000 | 00000 |
Internally Threaded Oil-Embedded Ball Joint Rod Ends with Grease Fitting


An oil-embedded bronze insert slowly releases lubricant to the rod end. Relubrication is recommended but not required. Connect your grease gun to the fitting to relubricate. Made of zinc-plated steel, these rod ends generally handle higher loads than stainless steel, aluminum, and nylon rod ends and offer moderate corrosion resistance.
Shank Thread Size | ID, mm | Max. Ball Swivel | O'all Wd., mm | O'all Thick., mm | Shank Center Lg., mm | Shank Thread Lg., mm | Static Radial Load Cap., lbs. | Material | Choose a Shank Thread Direction | Each | |
M8 × 1.25 mm | 8 | 18° | 22 | 12 | 36 | 17 | 4,000 | Zinc-Plated Carbon Steel | 0000000 | 000000 | |
M10 × 1.5 mm | 10 | 17° | 27 | 14 | 43 | 21 | 6,250 | Zinc-Plated Carbon Steel | 0000000 | 00000 | |
M12 × 1.75 mm | 12 | 17° | 30 | 16 | 50 | 24 | 7,750 | Zinc-Plated Carbon Steel | 0000000 | 00000 |
Internally Threaded Oil-Embedded Ball Joint Linkages


An oil-embedded bronze insert slowly releases lubricant to the rod end. Linkages consist of ball joint rod ends with a ball stud attached to simplify mounting. The stud is machined to fit perfectly inside its housing and swivel in all directions—good for clutches, throttles, and shift control rods. Maximum ball swivel is approximate. Periodic relubrication is needed.
Shank | Ball Stud | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Center Lg. | Thread Lg. | Thread Size | Center Lg. | Lg. | Max. Ball Swivel | Static Radial Load Cap. | Material | Each | |
Right-Hand Threaded Ball Stud | ||||||||||
Right-Hand Threaded Shank | ||||||||||
10-32 | 1 1/16" | 1/2" | 10-32 | 1 1/64" | 1/2" | 50° | Not Rated | Zinc-Plated Carbon Steel | 0000000 | 00000 |
1/4"-28 | 1 5/16" | 11/16" | 1/4"-28 | 1 1/32" | 9/16" | 50° | Not Rated | Zinc-Plated Carbon Steel | 0000000 | 0000 |
5/16"-24 | 1 3/8" | 11/16" | 5/16"-24 | 1 7/32" | 11/16" | 50° | Not Rated | Zinc-Plated Carbon Steel | 0000000 | 0000 |
3/8"-24 | 1 5/8" | 13/16" | 3/8"-24 | 1 9/16" | 29/32" | 50° | Not Rated | Zinc-Plated Carbon Steel | 0000000 | 0000 |
7/16"-20 | 1 13/16" | 15/16" | 7/16"-20 | 1 3/4" | 1 1/16" | 50° | Not Rated | Zinc-Plated Carbon Steel | 0000000 | 00000 |
1/2"-20 | 2 1/8" | 1 1/16" | 1/2"-20 | 2" | 1 1/8" | 50° | Not Rated | Zinc-Plated Carbon Steel | 0000000 | 00000 |
5/8"-18 | 2 1/2" | 1 3/8" | 5/8"-18 | 2 1/2" | 1 1/2" | 50° | Not Rated | Zinc-Plated Carbon Steel | 0000000 | 00000 |
3/4"-16 | 2 7/8" | 1 9/16" | 3/4"-16 | 3" | 1 13/16" | 50° | Not Rated | Zinc-Plated Carbon Steel | 0000000 | 00000 |
Left-Hand Threaded Shank | ||||||||||
10-32 | 1 1/16" | 1/2" | 10-32 | 1 1/64" | 1/2" | 50° | Not Rated | Zinc-Plated Carbon Steel | 00000000 | 0000 |
1/4"-28 | 1 5/16" | 11/16" | 1/4"-28 | 1 1/32" | 9/16" | 50° | Not Rated | Zinc-Plated Carbon Steel | 00000000 | 0000 |
5/16"-24 | 1 3/8" | 11/16" | 5/16"-24 | 1 7/32" | 11/16" | 50° | Not Rated | Zinc-Plated Carbon Steel | 00000000 | 0000 |
3/8"-24 | 1 5/8" | 13/16" | 3/8"-24 | 1 9/16" | 29/32" | 50° | Not Rated | Zinc-Plated Carbon Steel | 00000000 | 0000 |
7/16"-20 | 1 13/16" | 15/16" | 7/16"-20 | 1 3/4" | 1 1/16" | 50° | Not Rated | Zinc-Plated Carbon Steel | 00000000 | 00000 |
1/2"-20 | 2 1/8" | 1 1/16" | 1/2"-20 | 2" | 1 1/8" | 50° | Not Rated | Zinc-Plated Carbon Steel | 00000000 | 00000 |
5/8"-18 | 2 1/2" | 1 3/8" | 5/8"-18 | 2 1/2" | 1 1/2" | 50° | Not Rated | Zinc-Plated Carbon Steel | 00000000 | 00000 |
3/4"-16 | 2 7/8" | 1 9/16" | 3/4"-16 | 3" | 1 13/16" | 50° | Not Rated | Zinc-Plated Carbon Steel | 00000000 | 00000 |
Left-Hand Threaded Ball Stud | ||||||||||
Right-Hand Threaded Shank | ||||||||||
10-32 | 1 1/16" | 1/2" | 10-32 | 1 1/64" | 1/2" | 50° | Not Rated | Zinc-Plated Carbon Steel | 00000000 | 0000 |
1/4"-28 | 1 5/16" | 11/16" | 1/4"-28 | 1 1/32" | 9/16" | 50° | Not Rated | Zinc-Plated Carbon Steel | 00000000 | 0000 |
5/16"-24 | 1 3/8" | 11/16" | 5/16"-24 | 1 7/32" | 11/16" | 50° | Not Rated | Zinc-Plated Carbon Steel | 00000000 | 0000 |
3/8"-24 | 1 5/8" | 13/16" | 3/8"-24 | 1 9/16" | 29/32" | 50° | Not Rated | Zinc-Plated Carbon Steel | 00000000 | 0000 |
Left-Hand Threaded Shank | ||||||||||
1/4"-28 | 1 5/16" | 11/16" | 1/4"-28 | 1 1/32" | 9/16" | 50° | Not Rated | Zinc-Plated Carbon Steel | 00000000 | 0000 |
5/16"-24 | 1 3/8" | 11/16" | 5/16"-24 | 1 7/32" | 11/16" | 50° | Not Rated | Zinc-Plated Carbon Steel | 00000000 | 0000 |
1/2"-20 | 2 1/8" | 1 1/16" | 1/2"-20 | 2" | 1 1/8" | 50° | Not Rated | Zinc-Plated Carbon Steel | 00000000 | 00000 |
Oil-Embedded Ball Joint Linkages


An oil-embedded bronze insert slowly releases lubricant throughout the life of the joint. These ball joint linkages will require ongoing lubrication. They consist of ball joint rod ends with a ball stud attached to simplify mounting. The stud is machined to fit perfectly inside its housing and swivel in all directions—good for clutches, throttles, and shift control rods. Maximum ball swivel is approximate.
Shank | Ball Stud | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Center Lg. | Thread Lg. | Thread Size | Center Lg. | Lg. | Max. Ball Swivel | Static Radial Load Cap. | Material | Each | |
Right-Hand Threaded Ball Stud | ||||||||||
Right-Hand Threaded Shank | ||||||||||
10-32 | 1 1/4" | 3/4" | 10-32 | 1 1/64" | 1/2" | 50° | Not Rated | Zinc-Plated Carbon Steel | 0000000 | 00000 |
1/4"-28 | 1 9/16" | 1" | 1/4"-28 | 1 1/32" | 9/16" | 50° | Not Rated | Zinc-Plated Carbon Steel | 0000000 | 0000 |
5/16"-24 | 1 7/8" | 1 1/4" | 5/16"-24 | 1 7/32" | 11/16" | 50° | Not Rated | Zinc-Plated Carbon Steel | 0000000 | 0000 |
3/8"-24 | 1 15/16" | 1 1/4" | 3/8"-24 | 1 9/16" | 29/32" | 50° | Not Rated | Zinc-Plated Carbon Steel | 0000000 | 00000 |
7/16"-20 | 2 1/8" | 1 3/8" | 7/16"-20 | 1 3/4" | 1 1/16" | 50° | Not Rated | Zinc-Plated Carbon Steel | 0000000 | 00000 |
1/2"-20 | 2 7/16" | 1 1/2" | 1/2"-20 | 2" | 1 1/8" | 50° | Not Rated | Zinc-Plated Carbon Steel | 0000000 | 00000 |
5/8"-18 | 2 5/8" | 1 5/8" | 5/8"-18 | 2 1/2" | 1 1/2" | 50° | Not Rated | Zinc-Plated Carbon Steel | 0000000 | 00000 |
3/4"-16 | 2 7/8" | 1 3/4" | 3/4"-16 | 3" | 1 13/16" | 50° | Not Rated | Zinc-Plated Carbon Steel | 0000000 | 00000 |
Left-Hand Threaded Shank | ||||||||||
10-32 | 1 1/4" | 3/4" | 10-32 | 1 1/64" | 1/2" | 50° | Not Rated | Zinc-Plated Carbon Steel | 00000000 | 0000 |
1/4"-28 | 1 9/16" | 1" | 1/4"-28 | 1 1/32" | 9/16" | 50° | Not Rated | Zinc-Plated Carbon Steel | 00000000 | 0000 |
5/16"-24 | 1 7/8" | 1 1/4" | 5/16"-24 | 1 7/32" | 11/16" | 50° | Not Rated | Zinc-Plated Carbon Steel | 00000000 | 0000 |
3/8"-24 | 1 15/16" | 1 1/4" | 3/8"-24 | 1 9/16" | 29/32" | 50° | Not Rated | Zinc-Plated Carbon Steel | 00000000 | 00000 |
7/16"-20 | 2 1/8" | 1 3/8" | 7/16"-20 | 1 3/4" | 1 1/16" | 50° | Not Rated | Zinc-Plated Carbon Steel | 00000000 | 00000 |
1/2"-20 | 2 7/16" | 1 1/2" | 1/2"-20 | 2" | 1 1/8" | 50° | Not Rated | Zinc-Plated Carbon Steel | 00000000 | 00000 |
3/4"-16 | 2 7/8" | 1 3/4" | 3/4"-16 | 3" | 1 13/16" | 50° | Not Rated | Zinc-Plated Carbon Steel | 00000000 | 00000 |
Left-Hand Threaded Ball Stud | ||||||||||
Right-Hand Threaded Shank | ||||||||||
10-32 | 1 1/4" | 3/4" | 10-32 | 1 1/64" | 1/2" | 50° | Not Rated | Zinc-Plated Carbon Steel | 00000000 | 0000 |
1/4"-28 | 1 9/16" | 1" | 1/4"-28 | 1 1/32" | 9/16" | 50° | Not Rated | Zinc-Plated Carbon Steel | 00000000 | 0000 |
5/16"-24 | 1 7/8" | 1 1/4" | 5/16"-24 | 1 7/32" | 11/16" | 50° | Not Rated | Zinc-Plated Carbon Steel | 00000000 | 0000 |
3/8"-24 | 1 15/16" | 1 1/4" | 3/8"-24 | 1 9/16" | 29/32" | 50° | Not Rated | Zinc-Plated Carbon Steel | 00000000 | 00000 |
Electric Positioning Turntables


Often used in displays, these turntables have a motor for continuous rotation.
Style B have a three-prong outlet to power a mounted object.
Base Mounting Hole | Bearing | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Capacity, lbs. | OD | Overall Ht. | Turntable Speed, rpm | Voltage | Material | Mounting Fasteners Included | No. of | Dia. | Type | No. of | Material | Cord Lg., ft. | Each | |
Lubrication Not Required | |||||||||||||||
A | 100 | 17" | 4 5/8" | 2 | 120V AC | Powder-Coated Steel | No | 4 | 3/16" | Ball Sleeve | 1 2 | Bronze Steel | 6 | 0000000 | 0000000 |
A | 200 | 23" | 4 1/2" | 1 | 120V AC-240V AC | Powder-Coated Steel | Yes | 4 | 1/4" | Ball Sleeve | 1 2 | Bronze Steel | 6 | 0000000 | 00000000 |
B | 100 | 6 3/8" | 5 1/2" | 2 | 120V AC | Painted Steel | No | 4 | 3/16" | Ball Sleeve | 1 2 | Bronze Steel | 6 | 0000000 | 000000 |
B | 200 | 9 1/8" | 6 1/2" | 1 | 120V AC-240V AC | Powder-Coated Steel | Yes | 4 | 1/4" | Ball Sleeve | 1 2 | Bronze Steel | 6 | 0000000 | 00000000 |