McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    2 Products

    Hoist Rings—For Lifting

    Image of Product. Front orientation. Hoist Rings. Hoist Rings—For Lifting.
    Image of Specification. 180° Pivot. Front orientation. Contains Annotated. 180° Pivot. Hoist Rings—For Lifting.

    180° Pivot

    Image of Specification. 360° Swivel. Front orientation. Contains Annotated. 360° Swivel. Hoist Rings—For Lifting.

    360° Swivel

    Designed for angular lifting, hoist rings resist stresses that would bend or break an eyebolt. They have a lifting ring that pivots 180° front to back and a base that swivels 360° to compensate for pitch, roll, and sway when lifting heavy or unbalanced loads. Install the base of the hoist ring flush to the mounting surface and tighten to the recommended torque that is stamped on the ring. Torque wrenches are sold separately.
    Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the hoist ring can lift is significantly reduced. For example, when lifting a 1,000 lb. load at a 45° angle, you must choose a hoist ring with a capacity of at least 1,400 lbs. Do not use at an angle less than 30°.
    Warning: Never use to lift people or items over people.
    Machined—Machined hoist rings have a smooth finish to protect slings and hooks from damage and excess wear during lifting.
    Black-Oxide Steel—Black-oxide steel hoist rings have mild corrosion resistance.
    CE Marked—Hoist rings that are CE marked meet European safety standards.
    Each
    Thread
    Size
    Thread
    Lg.
    Inside
    Wd.
    Overall
    Ht.
    Vert. Cap.,
    lb.
    Movement
    Specs. Met
    Certification
    Mil. Spec.
    1-9
    10-Up
     
    Machined Black-Oxide Steel
    1 1/8"-8
    		2 5/16"2 3/4"8 7/8"10,000180° Pivot and 360° SwivelASME B30.26CE Marked, Mil. Spec.
    		MIL-STD-1365, MIL-STD-2093052T11500000000000000
     

    Rotating Eyebolts—For Lifting

    Unlike conventional eyebolts, you can rotate the eye 360° to match the angle of your load.
    Note: Capacities listed are for vertical lifting only. Eyebolts with shoulder can be used for angular lifting up to 45°, but the capacities will be significantly reduced. For angular lifting, we recommend Hoist Rings.
    Warning: Never use to lift people or items over people.
    Powder-Coated Steel
    Image of Product. Front orientation. Eyebolts. Rotating Eyebolts—For Lifting.
    Image of Attribute. Front orientation. Contains Annotated. Rotating Eyebolts—For Lifting.
    Powder-coated steel eyebolts are impact resistant, but less corrosion resistant than stainless steel eyebolts. They include a removable key for tightening the bolt.
    Closed Eye—Closed eyes are stronger than bent-closed eyes.
    Thread
    With Shoulder
    Size
    Lg.
    Shank
    Lg.
    Eye
    Dia.
    Vert. Cap.,
    lb.
    Threading
    Color
    Overall
    Lg.
    Each
    Closed Eye
    1 1/8"-8
    		1 13/32"1 13/32"1 29/32"7,050Fully ThreadedPink5"3059T1150000000
     
    back to top