1"-12 Swivels | McMaster-Carr

Filter by

System of Measurement

Material

Shank Gender

Shank Thread Size

Rod End Type

Capacity per Mount

10,000 lb. to 19,999 lb.

Mount Movement

Swivel

Static Radial Load Capacity

10,000 lb. to 99,999 lb.

Shank Thread Direction

Mount Type

Thread Direction

Base Material

Shank Center Length

Gender

Lubrication

Finish

Zinc Yellow-Chromate Plated

Overall Thickness

1 3/8"

Ball Material

Bearing Steel

Base Diameter

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

REACH

RoHS

Compliant with Exemptions

Not Compliant

Forward

How can we improve?

23 Products

Ball Joint Rod Ends

Made of steel, these rod ends generally handle higher loads than stainless steel, aluminum, and nylon rod ends. They don’t come lubricated, so you’ll need to lubricate during installation and on an ongoing basis.

Zinc-Plated Carbon Steel—Zinc-plated steel rod ends provide moderate corrosion resistance.

	Shank
	Thread Size	Ctr. Lg.	Thread Lg.	ID	Max. Ball Swivel	Overall Wd.	Overall Thk.	Static Radial Load Cap., lb.	Material	Choose a Shank Thread Direction		Each
Ball Joints



		1"-12	4 1/8"	2 1/8"	1"	17°	2 3/4"	1 3/8"	43,500	Zinc-Plated Carbon Steel	Right Hand, Left Hand	60645K62	000000

Swivel Leveling Mounts with Threaded Hole

Without Cushion

With Cushion

Keep equipment level on slightly sloped and pitted floors with mounts that have a ball-and-socket joint in the base. Add your own stud to create a custom-length mount that you can install in either threaded holes or unthreaded through holes.

Nickel-Plated Steel Base—With a shiny appearance, these mounts create a finished look. They're best for dry environments since the nickel plating offers minimal corrosion resistance.

Zinc-Yellow-Chromate-Plated Steel Base—More corrosion resistant than nickel-plated steel, these mounts are suitable for damp environments. However, they won’t hold up to chemical cleaners, high-pressure washdowns, and other harsh conditions like stainless steel can.

Black-Oxide Steel Base—With a matte black appearance, these mounts create a finished look. They offer minimal corrosion resistance, so they're best for dry environments.

303 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.

Delrin® Acetal Base—These mounts are economical yet resistant to grease, oil, and chemicals that pool on the floor. Often used on small, lightweight machines, they have about 25% the capacity of similarly sized metal mounts.

Rubber Cushion—A cushion under the base grips surfaces so vibrating equipment doesn't slide. It also protects floors from scrapes and gouges.

					Without Cushion				With Rubber Cushion
	Thread Size	Thread Dp.	Swivel Range of Motion	Base Dia.	Cap. per Mount, lb.	Overall Ht.		Each	Cap. per Mount, lb.	Overall Ht.	Cushion Material		Each
Nickel-Plated Steel Base



		1"-12	13/16"	7.5°	4"	18,000	1 7/8"	6103K213	000000	13,500	2"	Natural Rubber	6103K235	000000


		Zinc-Yellow-Chromate-Plated Steel Base



				1"-12	13/16"	7.5°	4"	18,000	1 7/8"	6103K214	00000	13,500	2"	Natural Rubber	6103K186	00000


				Black-Oxide Steel Base



						1"-12	13/16"	7.5°	4"	18,000	1 7/8"	6103K144	00000	—	—	—	———	0


						303 Stainless Steel Base



								1"-12	13/16"	7.5°	4"	—	—	———	0	13,500	2"	Natural Rubber	5212N28	00000


								Delrin® Acetal Base



										1"-12	13/16"	7.5°	4"	2,250	1 7/8"	6103K122	00000	2,250	2"	Natural Rubber	6103K109	00000

Swivel Leveling Mounts with Threaded Stud

Without Cushion

With Cushion

Keep equipment level on slightly sloped and pitted floors with mounts that have a ball-and-socket joint in the base. For mounting versatility, you can install them in either threaded holes or unthreaded through holes at the bottom of equipment.

Nickel-Plated Steel Base—With a shiny appearance, these mounts create a finished look. They're best for dry environments since the nickel plating offers minimal corrosion resistance.

Black-Oxide Steel Base—With a matte black appearance, these mounts create a finished look. They offer minimal corrosion resistance, so they're best for dry environments.

Rubber Cushion—A cushion under the base grips surfaces so vibrating equipment doesn't slide. It also protects floors from scrapes and gouges.

					Without Cushion				With Rubber Cushion
	Thread Size	Thread Lg.	Swivel Range of Motion	Base Dia.	Cap. per Mount, lb.	Overall Ht.		Each	Cap. per Mount, lb.	Overall Ht.	Cushion Material		Each
Nickel-Plated Steel Base and Stud



		1"-12	3 1/2"	7.5°	4"	18,000	5 3/8"	6111K157	000000	13,500	5 1/2"	Natural Rubber	6111K675	000000


		Zinc-Yellow-Chromate-Plated Steel Base and Stud



				1"-12	3 1/2"	7.5°	4"	18,000	5 3/8"	6111K173	00000	—	—	—	———	0


				Black-Oxide Steel Base and Zinc-Plated Steel Stud



						1"-12	3 1/2"	7.5°	4"	18,000	5 3/8"	6111K241	00000	—	—	—	———	0


						303 Stainless Steel Base and Stud



								1"-12	3 1/2"	7.5°	4"	—	—	———	0	13,500	5 1/2"	Natural Rubber	5546N38	000000

Rotating Flange Nuts

The head of these nuts rotates while the flange remains stationary, so you won't scratch the surface of finished parts as you tighten. They distribute pressure evenly across the mounting surface without the need for a separate washer. Also known as collar nuts.

Steel

Black-Oxide Steel—Typically chosen for their appearance, these nuts have a dark, matte coating that creates a finished look. They offer minimal corrosion resistance, so they're best for dry environments.

				Flange
	Thread Size	Wd.	Ht.	Dia.	Thk.	Material		Each
Black-Oxide Steel



		1"-12	1 5/8"	1 15/64"	2"	0.47"	Steel	90477A118	000000

Easy-Adjust Clevis Rod Ends


Clevis Rod End

Make quick adjustments to these rod ends by inserting and releasing the clevis pins without the need to bend them into place. Also called yoke-end linkages, they support pivoting movement along one axis when threaded onto shafts, rods, valve pistons, and other assemblies. All are zinc-plated steel for moderate corrosion resistance.

	Shank
	Thread Size	Ctr. Lg.	Thread Lg.	ID	Jaw Opening Wd.	Overall Wd.	Jaw Ctr. Lg.	Tensile Strength, psi	Includes	Shank Thread Direction		Each
Zinc-Plated Carbon Steel



		1"-12	3 15/16"	1 31/32"	1"	1"	1 15/16"	1 31/32"	60,000	Clevis Pin, Two Safety Clips	Right Hand	2447K25	000000

Internally Threaded Ball Joint Rod Ends with Grease Fitting

Connect your grease gun to the fitting to lubricate. These rod ends don’t come lubricated, so you'll need to lubricate during installation and on an ongoing basis. Made of steel, they generally handle higher loads than stainless steel, aluminum, and nylon rod ends.

	Shank
	Thread Size	Ctr. Lg.	Thread Lg.	ID	Max. Ball Swivel	Overall Wd.	Overall Thk.	Static Radial Load Cap., lb.	Material	Choose a Shank Thread Direction		Each
Ball Joints with Grease Fitting



		1"-12	4 1/8"	2 1/8"	1"	17°	2 3/4"	1 3/8"	43,500	Carbon Steel	Right Hand, Left Hand	4444T26	000000

Internally Threaded High-Load Ball Joint Rod Ends

These steel rod ends handle loads that are at least 25% higher than other comparably sized rod ends. PTFE allows smooth rotation and eliminates the need for lubrication.

Zinc-Plated Alloy Steel Insert—Rod ends with zinc-plated steel insert provide moderate corrosion resistance.

	Shank
	Thread Size	Ctr. Lg.	Thread Lg.	ID	Max. Ball Swivel	Overall Wd.	Overall Thk.	Static Radial Load Cap., lb.	Material	Shank Thread Direction		Each
Ball Joints







				Zinc-Plated Alloy Steel Insert and PTFE Liner

				1"-12	4 1/8"	2 1/8"	1"	17°	2 3/4"	1 3/8"	43,550	Zinc-Plated Carbon Steel	Right Hand	60745K751	000000

Ball Joint Rod Ends with Grease Fitting

Connect your grease gun to the fitting to lubricate. Made of steel, these rod ends generally handle higher loads than stainless steel, aluminum, and nylon rod ends.

	Shank
	Thread Size	Ctr. Lg.	Thread Lg.	ID	Max. Ball Swivel	Overall Wd.	Overall Thk.	Static Radial Load Cap., lb.	Material	Choose a Shank Thread Direction		Each
Ball Joints with Grease Fitting



		1"-12	4 1/8"	2 1/8"	1"	17°	2 3/4"	1 3/8"	37,000	Carbon Steel	Right Hand, Left Hand	4444T6	000000

Corrosion-Resistant Clevis Rod Ends

These clevis rod ends offer more corrosion resistance than standard steel clevis rod ends. Also called yoke-end linkages, they support pivoting movement along one axis when threaded onto shafts, rods, valve pistons, and other assemblies.

316 Stainless Steel—Stainless steel rod ends offer excellent corrosion resistance.

	Shank
	Thread Size	Ctr. Lg.	Thread Lg.	ID	Jaw Opening Wd.	Overall Wd.	Jaw Ctr. Lg.	Tensile Strength, psi	Includes	Shank Thread Direction		Each
316 Stainless Steel



		1"-12	8"	2"	1"	1 1/16"	2 1/8"	6"	80,000	Clevis Pin, Cotter Pin	Right Hand	6071K73	0000000

High-Load Ball Joint Rod Ends

These steel rod ends handle loads that are at least 25% higher than other comparably sized rod ends. PTFE allows smooth rotation and eliminates the need for lubrication.

Zinc-Plated Alloy Steel Insert—Rod ends with zinc-plated steel insert provide moderate corrosion resistance.

	Shank
	Thread Size	Ctr. Lg.	Thread Lg.	ID	Max. Ball Swivel	Overall Wd.	Overall Thk.	Static Radial Load Cap., lb.	Material	Choose a Shank Thread Direction		Each
Ball Joints







				Zinc-Plated Alloy Steel Insert and PTFE Liner

				1"-12	4 1/2"	2 1/2"	1"	17°	2 15/16"	1 3/8"	43,550	Zinc-Plated Carbon Steel	Right Hand, Left Hand	60745K74	000000

Internally Threaded Ball Joint Rod Ends

Made of steel, these rod ends generally handle higher loads than stainless steel, aluminum, and nylon rod ends. They don’t come lubricated, so you’ll need to lubricate them during installation and on an ongoing basis.

Zinc-Plated Carbon Steel—Zinc-plated steel rod ends provide moderate corrosion resistance.

	Shank
	Thread Size	Ctr. Lg.	Thread Lg.	ID	Max. Ball Swivel	Overall Wd.	Overall Thk.	Static Radial Load Cap., lb.	Material	Choose a Shank Thread Direction		Each
Ball Joints



		1"-12	4 1/8"	2 1/8"	1"	17°	2 3/4"	1 3/8"	43,500	Zinc-Plated Carbon Steel	Right Hand, Left Hand	60645K72	000000

Lubrication-Free Ball Joint Rod Ends

A carbon fiber-reinforced insert or PTFE liner reduces wear, handles shock loads, and eliminates the need for lubrication. Made of steel, these rod ends generally handle higher loads than stainless steel, aluminum, and nylon rod ends. All are zinc plated, so they resist corrosion for a short time before the finish is consumed and the steel is exposed.

	Shank
	Thread Size	Ctr. Lg.	Thread Lg.	ID	Max. Ball Swivel	Overall Wd.	Overall Thk.	Static Radial Load Cap., lb.	Material	Shank Thread Direction		Each
Ball Joints



		1"-12	4 1/8"	2 1/8"	1"	17°	2 3/4"	1 3/8"	43,500	Zinc-Plated Carbon Steel	Right Hand	2458K408	000000