M5 Swivels | McMaster-Carr

Filter by

System of Measurement

Tube OD

Shape

Thread Type

Thread Pitch

Gender

Fitting Connection

Connects To

For Use With

Material

Tube ID

Elbow Type

Tube Hardness Rating

Release Ring Color

Swivel Type

Swivels Until Tightened

Tee Type

Inline

Right Angle

Release Ring Material

Fitting Type

Release Type

Tube Material

Gasket Material

Export Control Classification Number (ECCN)

REACH

RoHS

Compliant with Exemptions

Not Compliant

DFARS Specialty Metals

63 Products

How to Identify and Measure Fittings

Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.

About Set Screws

Metric and UN/UNF
(SAE Straight) Male
Threads with Gasket

For Use With: Air, Lubricated Air
Temperature Range: 0° to 140° F
Tubing: Fittings with Release Ring and Fittings with no Release Type: Use with firm or hard (Durometer 95A-60D) nylon plastic, polyethylene plastic or polyurethane rubber
Fittings with Release Sleeve: Use with firm or hard (Durometer 95A-60D) polyethylene plastic or polyurethane rubber

Made of nickel-plated brass, these fittings have better corrosion resistance than unplated brass fittings. Also known as instant fittings, they connect to tubing with a push, and an internal gripping ring and O-ring hold the tubing tight. To disconnect, push on the release ring or sleeve and pull the tubing out of the fitting.

Fittings with release sleeve are easier to disconnect than fittings with a release ring because they are seamless and won't collect dirt and debris.

Metric and UN/UNF (SAE Straight) male threads with gasket or thread sealant provide extra protection against leaks.

For technical drawings and 3-D models, click on a part number.

90° Elbow Adapters (Intermittent Swivel), Tube × Male Threaded Pipe

Release Ring

Metric and UN/UNF
(SAE Straight) Male
Threads with Gasket

Fittings with intermittent swivel rotate 360° before and after installation as needed to allow movement in the system and to prevent kinking.

Release Ring
For Tube OD	Thread Size	Thread Pitch, mm	Material	Gasket Material	Max. Pressure		Each
Metric Threads
4mm	M5	0.8	Nickel-Plated Brass	Buna-N Rubber	250 psi @ 72° F	00000000	000000
5mm	M5	0.8	Nickel-Plated Brass	Buna-N Rubber	250 psi @ 72° F	00000000	00000
Release Sleeve
Metric Threads
1/8"	M5	0.8	Nickel-Plated Brass	Buna-N Rubber	230 psi @ 72° F	00000000	00000
5/32"	M5	0.8	Nickel-Plated Brass	Buna-N Rubber	230 psi @ 72° F	00000000	00000
3/16"	M5	0.8	Nickel-Plated Brass	Buna-N Rubber	230 psi @ 72° F	00000000	00000
1/4"	M5	0.8	Nickel-Plated Brass	Buna-N Rubber	230 psi @ 72° F	00000000	00000
3mm	M5	0.8	Nickel-Plated Brass	Buna-N Rubber	230 psi @ 72° F	00000000	00000
4mm	M5	0.8	Nickel-Plated Brass	Buna-N Rubber	230 psi @ 72° F	00000000	00000
5mm	M5	0.8	Nickel-Plated Brass	Buna-N Rubber	230 psi @ 72° F	00000000	00000
6mm	M5	0.8	Nickel-Plated Brass	Buna-N Rubber	230 psi @ 72° F	00000000	00000
8mm	M5	0.8	Nickel-Plated Brass	Buna-N Rubber	230 psi @ 72° F	00000000	00000

Push-to-Connect Tube Fittings for Air

BSPP, Metric, and
UN/UNF (SAE Straight)
Male Threads with Gasket

Temperature Range: 0° to 170° F, except polybutylene plastic fittings are 32° to 140° F
Tubing: Use with firm (Durometer 95A-45D) polyethylene plastic or polyurethane rubber
Specifications Met: ISO 14743, except cartridges and polybutylene plastic fittings

Insert tubing into these fittings and an internal gripping ring and O-ring hold the tubing tight. They are also known as instant fittings. To disconnect, push on the release ring and pull the tubing out of the fitting. Fittings have good corrosion resistance. Use them in low-pressure applications.

Identification rings (sold separately) snap over the release ring so you can color-code your lines.

Clips (sold separately) align and organize your tubing and fittings.

Metric male threads have either a gasket or a thread sealant to protect against leaks.

For technical drawings and 3-D models, click on a part number.

Short 90° Elbow Adapters (Intermittent Swivel), Tube × Male Threaded Pipe

BSPP, Metric, and
UN/UNF (SAE Straight)
Male Threads with Gasket

Fittings with intermittent swivel rotate 360° before and after installation as needed to allow movement in the system and to prevent kinking.

Metric Threads
For Tube OD	Thread Size	Thread Pitch, mm	Tube Connection Material	Pipe Connection Material	Gasket Material	Color	Release Ring Color	Max. Pressure		Each
3mm	M5	0.8	Nylon Plastic	Nickel-Plated Brass	Buna-N Rubber	Black	Black	290 psi @ 72° F	00000000	000000
4mm	M5	0.8	Nylon Plastic	Nickel-Plated Brass	Buna-N Rubber	Black	Black	290 psi @ 72° F	00000000	0000
6mm	M5	0.8	Nylon Plastic	Nickel-Plated Brass	Buna-N Rubber	Black	Black	290 psi @ 72° F	00000000	0000

Long 90° Elbow Adapters (Intermittent Swivel), Tube × Male Threaded Pipe

BSPP, Metric, and
UN/UNF (SAE Straight)
Male Threads with Gasket

Fittings with intermittent swivel rotate 360° before and after installation as needed to allow movement in the system and to prevent kinking.

Metric Threads
For Tube OD	Thread Size	Thread Pitch, mm	Tube Connection Material	Pipe Connection Material	Gasket Material	Color	Release Ring Color	Max. Pressure		Each
4mm	M5	0.8	Nylon Plastic	Nickel-Plated Brass	Buna-N Rubber	Black	Black	290 psi @ 72° F	00000000	000000
6mm	M5	0.8	Nylon Plastic	Nickel-Plated Brass	Buna-N Rubber	Black	Black	290 psi @ 72° F	00000000	00000

45° Elbow Adapters (Intermittent Swivel), Tube × Male Threaded Pipe

BSPP, Metric, and
UN/UNF (SAE Straight)
Male Threads with Gasket

Fittings with intermittent swivel rotate 360° before and after installation as needed to allow movement in the system and to prevent kinking.

Metric Threads
For Tube OD	Thread Size	Thread Pitch, mm	Tube Connection Material	Pipe Connection Material	Gasket Material	Color	Release Ring Color	Max. Pressure		Each
4mm	M5	0.8	Nylon Plastic	Nickel-Plated Brass	Buna-N Rubber	Black	Black	290 psi @ 72° F	00000000	00000
6mm	M5	0.8	Nylon Plastic	Nickel-Plated Brass	Buna-N Rubber	Black	Black	290 psi @ 72° F	00000000	0000

Inline Tee Adapters (Intermittent Swivel), Tube × Male Threaded Pipe

BSPP, Metric, and
UN/UNF (SAE Straight)
Male Threads with Gasket

Fittings with intermittent swivel rotate 360° before and after installation as needed to allow movement in the system and to prevent kinking.

Inline tees are also known as branch tees.

Metric Threads
For Tube OD	Thread Size	Thread Pitch, mm	Tube Connection Material	Pipe Connection Material	Gasket Material	Color	Release Ring Color	Max. Pressure		Each
4mm	M5	0.8	Nylon Plastic	Nickel-Plated Brass	Buna-N Rubber	Black	Black	290 psi @ 72° F	00000000	000000
6mm	M5	0.8	Nylon Plastic	Nickel-Plated Brass	Buna-N Rubber	Black	Black	290 psi @ 72° F	00000000	00000

Right-Angle Tee Adapters (Intermittent Swivel), Tube × Male Threaded Pipe

Fittings with intermittent swivel rotate 360° before and after installation as needed to allow movement in the system and to prevent kinking.

Right-angle tees are also known as run tees.

Metric Threads
For Tube OD	Thread Size	Thread Pitch, mm	Tube Connection Material	Pipe Connection Material	Gasket Material	Color	Release Ring Color	Max. Pressure		Each
4mm	M5	0.8	Nylon Plastic	Nickel-Plated Brass	Buna-N Rubber	Black	Black	290 psi @ 72° F	00000000	000000
6mm	M5	0.8	Nylon Plastic	Nickel-Plated Brass	Buna-N Rubber	Black	Black	290 psi @ 72° F	00000000	00000

Wye Adapters (Intermittent Swivel), Male Threaded Pipe × Tube

Fittings with intermittent swivel rotate 360° before and after installation as needed to allow movement in the system and to prevent kinking.

Metric Threads
Thread Size	Thread Pitch, mm	For Tube OD	Pipe Connection Material	Tube Connection Material	Gasket Material	Color	Release Ring Color	Max. Pressure		Each
M5	0.8	4mm	Nickel-Plated Brass	Nylon Plastic	Buna-N Rubber	Black	Black	290 psi @ 72° F	00000000	000000
M5	0.8	6mm	Nickel-Plated Brass	Nylon Plastic	Buna-N Rubber	Black	Black	290 psi @ 72° F	00000000	00000

Identification Rings

For Tube OD	Material	Choose a Color		Each
6mm	Nylon Plastic	Blue, Green, Red, White, Yellow	00000000	00000

Push-to-Connect Tube Fittings with Shut-Off for Air

Metric and BSPP
Male Threads
with Gasket

Temperature Range: 32° to 140° F
Tubing: Fittings with Blue Release Ring: Use with firm or hard (Durometer 95A-95D) nylon plastic or polyurethane rubber
Fittings with Black Release Ring: Use with firm (Durometer 95A-45D) polyurethane rubber
Specifications Met: ISO 14743, except fittings with blue release ring

A built-in shut-off valve stops airflow when the fittings are disconnected from tubing. Also known as instant fittings, they connect to tubing with a push, and an internal gripping ring and O-ring hold the tubing tight. To disconnect, push on the release ring and pull the tubing out of the fitting. Fittings have good corrosion resistance.

Identification rings (sold separately) snap over the release ring so you can color-code your lines.

Clips (sold separately) align and organize your tubing and fittings.

Metric and BSPP male threads have a gasket to protect against leaks.

For technical drawings and 3-D models, click on a part number.

90° Elbow Adapters (Intermittent Swivel), Tube × Male Threaded Pipe

Metric and BSPP
Male Threads
with Gasket

Fittings with intermittent swivel rotate 360° before and after installation as needed to allow movement in the system and to prevent kinking.

	Thread
For Tube OD, mm	Size	Pitch, mm	Tube Connection Material	Pipe Connection Material	Gasket Material	Color	Release Ring Color	Max. Pressure		Each
Metric Threads
4	M5	0.8	Polybutylene Plastic	Nickel-Plated Brass	Buna-N Rubber	Black	Blue	140 psi @ 72° F	0000000	00000
6	M5	0.8	Polybutylene Plastic	Nickel-Plated Brass	Buna-N Rubber	Black	Blue	140 psi @ 72° F	0000000	0000

Clips

For Tube OD	For Tube OD of Tube Fitting	Material	Number of Clips		Each
5/16", 8mm	5/32", 4mm	Nylon Plastic	7	00000000	00000
3/8", 10mm	6mm, 1/4"	Nylon Plastic	6	00000000	0000

Stainless Steel Push-to-Connect Tube Fittings for Air and Water

BSPP, Metric, and
UN/UNF (SAE Straight)
Male Threads with Gasket

Temperature Range: -10° to 300° F,
except ISO 14743 fittings: 5° to 390° F
Tubing: Use with firm or hard (Durometer 95A-72D) nylon plastic or polyurethane rubber,
except ISO 14743 fittings: Use with firm (Durometer 85A-100A) nylon plastic or polyurethane rubber

Made entirely of stainless steel, these fittings have the best corrosion resistance of all our metal push-to-connect fittings. Also known as instant fittings, they connect to tubing with a push, and an internal gripping ring and O-ring hold the tubing tight. To disconnect, push on the release ring and pull the tubing out of the fitting.

Metric male threads have either a gasket or thread sealant to protect against leaks.

For technical drawings and 3-D models, click on a part number.

Long 90° Elbow Adapters (Intermittent Swivel), Tube × Male Threaded Pipe

BSPP, Metric, and
UN/UNF (SAE Straight)
Male Threads with Gasket

Fittings with intermittent swivel rotate 360° before and after installation as needed to allow movement in the system and to prevent kinking.

Metric Threads
For Tube OD, mm	Thread Size	Material	Gasket Material	Max. Pressure		Each
4	M5	316 Stainless Steel	Fluoroelastomer Rubber	435 psi @ 72° F	000000000	000000
6	M5	316 Stainless Steel	Fluoroelastomer Rubber	435 psi @ 72° F	000000000	00000

Rotating Push-to-Connect Tube Fittings for Air

Temperature Range: 25° to 140° F
Tubing: Use with firm or hard (Durometer 55D-60D, Durometer 91A-97A, or Rockwell R70-R85) nylon plastic or polyurethane rubber

Ball bearings allow these fittings to rotate 360°, even after they are tightened. Fittings rotate at the pipe end and have a special seal that reduces friction to allow for continuous rotation. Also known as instant fittings, they connect to tubing with a push, and an internal gripping ring and O-ring hold the tubing tight. To disconnect, push on the release ring and pull the tubing out of the fitting. They have good corrosion resistance.

Fittings with double-row bearing construction minimize friction for high-speed applications, such as the oscillating and rotating sections of robots. Their ball bearings are made of 440C stainless steel, so their corrosion resistance is excellent and better than that of steel bearings.

Metric and UN/UNF (SAE Straight) male threads have a gasket to protect against leaks. UN/UNF (SAE Straight) threads are also known as O-ring boss threads.

For technical drawings and 3-D models, click on a part number.

Straight Adapters, Tube × Male Threaded Pipe

Single Bearing Row

Metric and UN/UNF
(SAE Straight) Male
Threads with Gasket

Double Bearing Row

Metric Threads
For Tube OD	Thread Size	Thread Pitch, mm	Bearing Construction	Tube Connection Material	Pipe Connection Material	Gasket Material	Color	Release Ring Color	Max. Pressure		Each
4mm	M5	0.8	Double Row	Polybutylene Plastic	Nickel-Plated Brass	Buna-N Rubber	Gray	Gray	140 psi @ 72° F	000000000	000000
4mm	M5	0.8	Single Row	Polybutylene Plastic	Nickel-Plated Brass	Buna-N Rubber	Gray	Blue	140 psi @ 72° F	000000000	00000
6mm	M5	0.8	Double Row	Polybutylene Plastic	Nickel-Plated Brass	Buna-N Rubber	Gray	Gray	140 psi @ 72° F	000000000	00000
6mm	M5	0.8	Single Row	Polybutylene Plastic	Nickel-Plated Brass	Buna-N Rubber	Gray	Blue	140 psi @ 72° F	000000000	00000

90° Elbow Adapters, Tube × Male Threaded Pipe

Single Bearing Row

Metric and UN/UNF
(SAE Straight) Male
Threads with Gasket

Double Bearing Row

Metric Threads
For Tube OD	Thread Size	Thread Pitch, mm	Bearing Construction	Tube Connection Material	Pipe Connection Material	Gasket Material	Color	Release Ring Color	Max. Pressure		Each
4mm	M5	0.8	Double Row	Polybutylene Plastic	Nickel-Plated Brass	Buna-N Rubber	Gray	Gray	140 psi @ 72° F	000000000	000000
4mm	M5	0.8	Single Row	Polybutylene Plastic	Nickel-Plated Brass	Buna-N Rubber	Gray	Blue	140 psi @ 72° F	000000000	00000
6mm	M5	0.8	Double Row	Polybutylene Plastic	Nickel-Plated Brass	Buna-N Rubber	Gray	Gray	140 psi @ 72° F	000000000	00000
6mm	M5	0.8	Single Row	Polybutylene Plastic	Nickel-Plated Brass	Buna-N Rubber	Gray	Blue	140 psi @ 72° F	000000000	00000

Moisture-Resistant Push-to-Connect Tube Fittings for Air and Water

For Use With: Air, Lubricated Air, Water,
except Manifolds with Swivel: Air, Water
Temperature Range: 32° to 100° F
Tubing: Use with firm (Durometer 90A-95A) nylon plastic or polyurethane rubber

These fittings won’t absorb moisture, so they’re good for water and high-humidity air applications. Also known as instant fittings, they connect to tubing with a push, and an internal gripping ring and O-ring hold the tubing tight. To disconnect, push on the release ring and pull the tubing out of the fitting. They have good corrosion resistance.

Nickel-plated brass fittings have better corrosion resistance than unfinished brass fittings.

Metric male threads have a gasket to protect against leaks.

For technical drawings and 3-D models, click on a part number.

Short 90° Elbow Adapters (Intermittent Swivel), Tube × Male Threaded Pipe

Fittings with intermittent swivel rotate 360° before and after installation as needed to allow movement in the system and to prevent kinking.

Metric Threads
For Tube OD	Thread Size	Thread Pitch, mm	Tube Connection Material	Gasket Material	Color	Release Ring Color	Max. Pressure	Choose a Pipe Connection Material		Each
4mm	M5	0.8	Polybutylene Plastic	Buna-N Rubber	Gray	Gray	140 psi @ 72° F	Brass, Nickel-Plated Brass	00000000	00000
6mm	M5	0.8	Polybutylene Plastic	Buna-N Rubber	Gray	Gray	140 psi @ 72° F	Brass, Nickel-Plated Brass	00000000	0000

Inline Tee Adapters (Intermittent Swivel), Tube × Male Threaded Pipe

Fittings with intermittent swivel rotate 360° before and after installation as needed to allow movement in the system and to prevent kinking.

Inline tees are also known as branch tees.

						Release Ring
For Tube OD	Thread Size	Thread Pitch, mm	Tube Connection Material	Gasket Material	Color	Material	Color	Max. Pressure	Choose a Pipe Connection Material		Each
Metric Threads
4mm	M5	0.8	Polybutylene Plastic	Buna-N Rubber	Gray	Plastic	Gray	140 psi @ 72° F	Brass, Nickel-Plated Brass	00000000	00000
6mm	M5	0.8	Polybutylene Plastic	Buna-N Rubber	Gray	Plastic	Gray	140 psi @ 72° F	Brass, Nickel-Plated Brass	00000000	0000

Right-Angle Tee Adapters (Intermittent Swivel), Tube × Male Threaded Pipe

Fittings with intermittent swivel rotate 360° before and after installation as needed to allow movement in the system and to prevent kinking.

Right-angle tees are also known as run tees.

						Release Ring
For Tube OD	Thread Size	Thread Pitch, mm	Tube Connection Material	Gasket Material	Color	Material	Color	Max. Pressure	Choose a Pipe Connection Material		Each
Metric Threads
4mm	M5	0.8	Polybutylene Plastic	Buna-N Rubber	Gray	Plastic	Gray	140 psi @ 72° F	Brass, Nickel-Plated Brass	00000000	00000
6mm	M5	0.8	Polybutylene Plastic	Buna-N Rubber	Gray	Plastic	Gray	140 psi @ 72° F	Brass, Nickel-Plated Brass	00000000	0000

Wye Adapters (Intermittent Swivel), Male Threaded Pipe × Tube

Fittings with intermittent swivel rotate 360° before and after installation as needed to allow movement in the system and to prevent kinking.

Metric Threads
Thread Size	Thread Pitch, mm	For Tube OD	Tube Connection Material	Gasket Material	Color	Release Ring Color	Max. Pressure	Mount Type	Mounting Fasteners Included	Choose a Pipe Connection Material		Each
M5	0.8	4mm	Polybutylene Plastic	Buna-N Rubber	Gray	Gray	140 psi @ 72° F	Screw On	No	Brass, Nickel-Plated Brass	00000000	00000
M5	0.8	6mm	Polybutylene Plastic	Buna-N Rubber	Gray	Gray	140 psi @ 72° F	Screw On	No	Brass, Nickel-Plated Brass	00000000	0000

High-Temperature Brass Push-to-Connect Tube Fittings for Air and Water

Temperature Range: 0° to 300° F
Tubing: Use with firm or hard (Durometer 95A-65D) nylon plastic or polyurethane rubber
Specifications Met: ISO 14743

These fittings have the highest temperature rating of all our brass push-to-connect tube fittings for air and water. Also known as instant fittings, they connect to tubing with a push, and an internal gripping ring and O-ring hold the tubing tight. To disconnect, push on the release ring and pull the tubing out of the fitting. They are nickel-plated for very good corrosion resistance.

For technical drawings and 3-D models, click on a part number.

90° Elbow Adapters (Intermittent Swivel), Tube × Male Threaded Pipe

Fittings with intermittent swivel rotate 360° before and after installation as needed to allow movement in the system and to prevent kinking.

Metric Threads
For Tube OD	Thread Size	Thread Pitch, mm	Material	O-Ring Material	Max. Pressure		Each
4mm	M5	0.8	Nickel-Plated Brass	Fluoroelastomer Rubber	290 psi @ 72° F	00000000	000000

90° Elbow Adapters (Intermittent Swivel) with External Hex Drive, Tube × Male Threaded Pipe

Fittings with intermittent swivel rotate 360° before and after installation as needed to allow movement in the system and to prevent kinking.

Fittings with external hex allow for easy adjustments in tight spaces; they are also known as banjo-style fittings.

Metric Threads
For Tube OD	Thread Size	Thread Pitch, mm	Material	O-Ring Material	Max. Pressure		Each
4mm	M5	0.8	Nickel-Plated Brass	Fluoroelastomer Rubber	290 psi @ 72° F	00000000	000000
6mm	M5	0.8	Nickel-Plated Brass	Fluoroelastomer Rubber	290 psi @ 72° F	00000000	00000

Inline Tee Adapters (Intermittent Swivel), Tube × Male Threaded Pipe

Fittings with intermittent swivel rotate 360° before and after installation as needed to allow movement in the system and to prevent kinking.

Inline tees are also known as branch tees.

Metric Threads
For Tube OD	Thread Size	Thread Pitch, mm	Material	O-Ring Material	Max. Pressure		Each
4mm	M5	0.8	Nickel-Plated Brass	Fluoroelastomer Rubber	290 psi @ 72° F	00000000	000000

Screw-On Nut Barbed Tube Fittings for Air

BSPP and UN/UNF
(SAE Straight) Male
Threads with Gasket

Temperature Range: 20° to 140° F
Tubing: Fittings with Anodized Aluminum, Brass, or Nylon Plastic Material: Use with firm or hard (Durometer 95A-60D) polyethylene plastic or polyurethane rubber
Fittings with 316 Stainless Steel Material: Use with firm or hard (Durometer 80A-95A) nylon plastic, polyethylene plastic or polyurethane rubber

You don’t need a clamp to secure these fittings to tubing. They have a nut on the barbed end that tightens to hold the tubing in place.

Brass fittings have good corrosion resistance.

Metric and BSPP male threads with gasket provide extra protection against leaks.

For technical drawings and 3-D models, click on a part number.

90° Elbow Adapters with External Hex Drive (Swivels Until Tightened), Tube × Male Threaded Pipe

BSPP and UN/UNF
(SAE Straight) Male
Threads with Gasket

Fittings that swivel until tightened rotate 360° for easy installation. They have an external hex drive for easy adjustments in tight spaces. They are also known as banjo-style fittings.

	Thread
For Tube ID, mm	Size	Pitch, mm	Material	Gasket Material	Max. Pressure	Drive Size, mm		Each
Metric Threads
3	M5	0.8	Brass	PVC Plastic	145 psi @ 72° F	8	0000000	000000
4	M5	0.8	Brass	PVC Plastic	145 psi @ 72° F	8	00000000	0000

High-Temperature Push-to-Connect Fittings for Food, Beverage, and Dairy

Temperature Range: 5° to 280° F
Tubing: Use with FEP, Nylon, Polyethylene, or PTFE Plastic
Specifications Met: NSF/ANSI 169, EC Regulation 1935/2004, DM 174/2004

Connect hot food and beverage lines with just a push. Also known as instant fittings, they have an internal gripping ring and an O-ring that hold tight to tubing. To disconnect the fittings, push the release ring and pull the tubing out of the fitting. They meet U.S. and European Union standards for food safety and Italian standards for drinking water.

For technical drawings and 3-D models, click on a part number.

90° Elbow Adapters (Intermittent Swivel), Tube × Male Threaded Pipe

Fittings with intermittent swivel rotate 360° before and after installation as needed to allow movement in the system and to prevent kinking.

				Release Ring			Brass Sleeve
For Tube OD, mm	Thread Size	Thread Pitch, mm	Material	Material	Color	Max. Pressure		Each
Metric Threads
4	M5	0.8	PPSU Plastic	Plastic	White	290 psi @ 72° F	0000000	00000
6	M5	0.8	PPSU Plastic	Plastic	White	290 psi @ 72° F	0000000	0000

Swiveling Tips for Screws and Threaded Studs

Attach to the end of a screw or threaded stud to apply uniform pressure on uneven and angled surfaces. Also known as toggle and swivel-foot pads.

For technical drawings and 3-D models, click on a part number.

Steel
Dia.	Ht.	Load Capacity, lbs.	Thread Size	Range of Motion		Each
13mm	16.5mm	360	M5	20°	0000000	000000

Metric Alloy Steel Low-Profile Swivel-Tip Set Screws

A low-profile flat-faced ball tip allows these set screw to be used in low-clearance applications. They're also known as ball-ended thrust screws. Length listed is the overall length.

For technical drawings and 3-D models, click on a part number.

Alloy Steel
Lg., mm	Tip Dia., mm	Max. Swivel Angle	Drive Size, mm	Hardness		Each
M5 × 0.8 mm
9.5	2.2	9°	2.5	Rockwell C39	000000000	00000
15.5	2.2	9°	2.5	Rockwell C39	000000000	00000
24.5	2.2	9°	2.5	Rockwell C39	000000000	00000

Corrosion-Resistant Extension Spring Stud Anchors

These stainless steel anchor studs offer excellent corrosion resistance. Attach an extension spring to a stud and then thread the stud into your part for a secure connection.

For technical drawings and 3-D models, click on a part number.

Metric

Thread
Size	Pitch, mm	Min. Lg., mm	Lg., mm	Dia., mm	Hole Dia., mm	Material	Anchor Type		Each
M5	0.8	19	28	5	3	18-8 Stainless Steel	Stud	000000000	000000

Extension Spring Stud Anchors

A black-oxide finish provides these steel anchors with mild corrosion resistance. Attach an extension spring to a stud and then thread the stud into your part for a secure connection.

For technical drawings and 3-D models, click on a part number.

Metric

Thread
Size	Pitch, mm	Min. Lg., mm	Lg., mm	Dia., mm	Hole Dia., mm	Material		Each
M5	0.8	19	28	5	3	Black-Oxide Steel	0000000	00000

Corrosion-Resistant Swiveling Extension Spring Stud Anchors

These stainless steel anchor studs offer excellent corrosion resistance. The head swivels 360° so the spring stays straight and properly coiled. Attach an extension spring to a stud and then thread the stud into your part for a secure connection. To make tightening easier, anchors have a hex socket on the bottom and wrench flats at the top of the threads.

For technical drawings and 3-D models, click on a part number.

Metric

Thread
Size	Pitch, mm	Min. Lg., mm	Lg., mm	Dia., mm	Hole Dia., mm	Hex Size, mm	Material		Each
M5	0.8	19	28	5	3	1.5	18-8 Stainless Steel	000000000	000000

Swiveling Extension Spring Stud Anchors

A black-oxide finish provides these steel anchors with mild corrosion resistance. The head swivels 360° so the spring stays straight and properly coiled. Attach an extension spring to a stud and then thread the stud into your part for a secure connection. To make tightening easier, anchors have a hex socket on the bottom and wrench flats at the top of the threads.

For technical drawings and 3-D models, click on a part number.

Metric

Thread
Size	Pitch, mm	Min. Lg., mm	Lg., mm	Dia., mm	Hole Dia., mm	Hex Size, mm	Material		Each
M5	0.8	19	28	5	3	1.5	Black-Oxide Steel	000000000	000000

Email Us

How to Identify and Measure Fittings

About Set Screws

Nickel-Plated Brass Push-to-Connect Tube Fittings for Air

Push-to-Connect Tube Fittings for Air

Push-to-Connect Tube Fittings with Shut-Off for Air

Stainless Steel Push-to-Connect Tube Fittings for Air and Water

Rotating Push-to-Connect Tube Fittings for Air

Moisture-Resistant Push-to-Connect Tube Fittings for Air and Water

High-Temperature Brass Push-to-Connect Tube Fittings for Air and Water

Screw-On Nut Barbed Tube Fittings for Air

High-Temperature Push-to-Connect Fittings for Food, Beverage, and Dairy

Swiveling Tips for Screws and Threaded Studs

Metric Alloy Steel Low-Profile Swivel-Tip Set Screws

Corrosion-Resistant Extension Spring Stud Anchors

Extension Spring Stud Anchors

Corrosion-Resistant Swiveling Extension Spring Stud Anchors

Swiveling Extension Spring Stud Anchors