T-Handle Hooks | McMaster-Carr

Filter by

Product Family

Door Holders

Draw Latches

Gear and Bearing Pullers

Handle Style

Tip Style

Material

Tip Angle

Overall Length

Handle Material

Performance

Jaw Style

External and Internal

DFARS Specialty Metals

Number of Jaws

Shaft Flexibility

RoHS

Compliant with Exemptions

Reach Length

Sold As

Tip Type

Length

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

Export Control Classification Number (ECCN)

REACH

Weight Capacity

Thread Size

Corkscrew Diameter

Jaw Tip Thickness

Jaw Overall Length

Number of Pieces

Help me decide (beta)

116 Products

Deep-Offset-End Picks

Multiangle Tip

T-Handle

Reach around obstructions and into tight spaces with picks that have a long, angled tip. Use these tools to hold, separate, and position wire, springs, and other small parts.

	Overall Lg.	Grip Style	Material	Handle Material		Each
Multiangle Tip



	T-Handle	6"	Plain	Steel	Steel	94765K21	000000

Nonsparking Picks

Made of beryllium copper that is FM approved, these picks satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. They are also nonmagnetic. Use to hold, separate, and position wire, springs, and other small parts.

Warning: Do not use these tools in direct contact with acetylene.

	Overall Lg.	Grip Style	Material	Handle Material		Each
90° Angled Tip



	T-Handle	10"	Plain	Beryllium Copper	Beryllium Copper	6475A11	000000

Changeable-Tip Packing Seal Puller Sets

Sets include an assortment of handles and tips for pulling material out of tight spots. Replace tips when they become worn or to use a different style. Also known as packing extractors, they are often used to extract packing material from pump and valve seals.

Corkscrew tips twist into material for a firm hold.

Wood screw tips are used to drill into and remove hardened packing when corkscrew tips are unable to get a secure hold on your material.

Machine screw tips thread into tapped holes. They're good for removing stuck or seized metallic components that can't be gripped easily.

Brush tips have stiff bristles that clean debris out of cavities after material has been pulled out with a screw tip.

Flexible Shaft—Flexible-shaft pullers bend to access material in tight spots.

Pry Bar—Sets with pry bars give more leverage for pulling and packing.

	Includes	Tip Mounting Thread Size	Grip Style	Handle Material	Container Type		Each
Flexible Shaft



	6	Three Steel Flexible Shafts with T-Handles (8", 11 1/12", and 15" Lg.) Three Steel Corkscrew Tips (1/4", 5/16", and 3/8" Dia.)	8-32, 1/4"-20	Plain	Steel	Cardboard Box	9498K112	000000


	8	Two Steel Flexible Shafts with T-Handles (11 3/4" Lg.) Four Steel Corkscrew Tips (1/4" Dia.) Wrench Pry Bar	8-32	Plain	Steel	Plastic Box	9498K114	000000
	14	Three 10" Lg. Steel 45° Angle Picks with Loop Handles (One each of 1/8", 3/16", and 5/16" Dia.) Four Steel Flexible Shafts with T-Handles (Two each of 7" and 11" Lg.) Six Steel Corkscrew Tips (Three each of 1/4" and 5/16" Dia.) Wrench	8-32, 1/4"-20	Plain	Steel	Plastic Box	9498K11	000000
	14	Four Steel Flexible Shafts with T-Handles (Two each of 11 1/2" and 14 3/4" Lg.) Eight Steel Corkscrew Tips (Four each of 5/16" and 3/8" Dia.) Wrench Pry Bar	1/4"-20	Plain	Steel	Plastic Box	9498K115	000000
	22	Three 10" Lg. Steel 45° Angle Picks with Loop Handles (One each of 1/8", 3/16", and 5/16" Dia.) Six Steel Flexible Shafts with T-Handles (Two each of 7", 11", and 14" Lg.) Nine Steel Corkscrew Tips (Three each of 1/4", 5/16", and 3/8" Dia.) Three Steel Wood Screw Tips (One each of 3/16", 1/4", and 5/16" Thread Size) Wrench	8-32, 1/4"-20	Plain	Steel	Plastic Box	9498K12	000000


	Flexible Shaft, Rigid Shaft



			49	Two 6" Lg. Steel 20° Angle Picks with Loop Handles Three 10" Lg. Steel 45° Angle Picks with Loop Handles (One each of 1/8", 3/16", and 5/16" Dia.) Six Steel Rigid Shafts with Loop Handles (Two each of 6", 10", and 14" Lg.) Six Steel Flexible Shafts with T-Handles (Two each of 7", 11", and 14" Lg.) 15 Steel Corkscrew Tips (Five each of 1/4", 5/16", and 3/8" Dia.) Three Steel Wood Screw Tips (One each of 3/16", 1/4", and 5/16" Thread Size) Six Steel Machine Screw Tips (One each of 8-32, 10-32, 10-24, 1/4"-20, 1/4"-28, and 5/16"-18 Thread Size) Four Steel Brush Tips (One each of 7/32", 5/16", 5/8", and 11/16" Dia.) Two Brush Tip Adapters Knife Wrench	8-32, 1/4"-20	Plain	Steel	Plastic Box	9498K13	000000

Packing Seal Puller Tips


Machine Screw	Wood Screw	Corkscrew Tip

Brush Tip	Hook Tip

Corkscrew Tip—Corkscrew tips twist into material for a firm hold.

Wood Screw Tip—Wood screw tips are used to drill into and remove hardened packing when corkscrew tips are unable to get a secure hold on your material.

Machine Screw Tip—Machine screw tips thread into tapped holes. They're good for removing stuck or seized metallic components that can't be gripped easily.

Brush Tip—Brush tips have stiff bristles that clean debris out of cavities after material has been pulled out with a screw tip.

	Corkscrew Dia.	Screw Size	Thread Size	Brush Dia.	Tip Dia.	Material	Pkg. Qty.		Pkg.
Corkscrew Tip



	8-32	1/4"	—	—	—	—	Steel	1	9756K42	00000


	1/4"-20	5/16"	—	—	—	—	Steel	1	9756K44	0000
	1/4"-20	3/8"	—	—	—	—	Steel	1	9756K46	00000


	Wood Screw Tip



			8-32	—	3/16"	—	—	—	Steel	1	9756K52	0000


			1/4"-20	—	1/4"	—	—	—	Steel	1	9756K54	0000
			1/4"-20	—	5/16"	—	—	—	Steel	1	9756K56	0000


			Machine Screw Tip



					8-32	—	—	8-32, 10-24, 10-32	—	—	Steel	3	9756K72	0000


					1/4"-20	—	—	1/4"-20, 1/4"-28, 5/16"-18	—	—	Steel	3	9756K74	0000


					Brush Tip



							8-32	—	—	—	7/32", 5/16"	—	Steel	2	9756K62	00000


							1/4"-20	—	—	—	5/8", 11/16"	—	Steel	2	9756K64	00000


							Hook Tip



									8-32	—	—	—	—	0.083"	Steel	1	9756K88	0000


									1/4"-20	—	—	—	—	0.108"	Steel	1	9756K92	00000

Lavatory Hanging Hooks

Style D

			Overall
	Style	No. of Prongs	Wd.	Ht.	Dp.	Material	Appearance	Screw Size	Mount Type	Mounting Fasteners Included		Each
Wall Mount



		D	1	4"	2"	2"	Stainless Steel	Dull	No. 10	Screw	No	2376K79	000000

Packing Seal Puller Sets


Flexible Shaft 3 Pieces	Flexible Shaft 8 Pieces

Use the assorted tools in these sets to pull material out of tight spots. The corkscrew tips twist into material for a firm hold while the handle provides the necessary leverage for pulling. Also known as packing extractors, they are often used to remove packing material from pump and valve seals.

Flexible Shaft—Flexible-shaft pullers bend to access material in tight spots.

	Includes	Grip Style	Handle Material	Mil. Spec.		Each
Flexible Shaft



	3	7 1/2" Lg. Steel Puller with 1/4" Dia. Corkscrew Tip and T-Handle 10 3/4" Lg. Steel Puller with 5/16" Dia. Corkscrew Tip and T-Handle 14 1/2" Lg. Steel Puller with 3/8" Dia. Corkscrew Tip and T-Handle	Plain	Steel	Fed. Spec. GGG-E-950	9492K19	000000


	8	7" Lg. Steel Puller with 3/16" Dia. Corkscrew Tip and T-Handle 7 1/2" Lg. Steel Puller with 1/4" Dia. Corkscrew Tip and T-Handle 10 3/4" Lg. Steel Puller with 5/16" Dia. Corkscrew Tip and T-Handle 14 1/2" Lg. Steel Puller with 3/8" Dia. Corkscrew Tip and T-Handle 18" Lg. Steel Puller with 1/2" Dia. Corkscrew Tip and T-Handle 22" Lg. Steel Puller with 3/8" Dia. Corkscrew Tip and T-Handle 22" Lg. Steel Puller with 5/8" Dia. Corkscrew Tip and T-Handle 30" Lg. Steel Puller with 3/8" Dia. Corkscrew Tip and T-Handle	Plain	Steel	Fed. Spec. GGG-E-950	9492K21	000000

Trailer Wall-Mount Door Holders

Commonly used on semi-trailer doors, these holders have a long hook that secures heavy doors in the open position.

			Mounting
Material	Projection	Ht.	Hardware Included	Screw Size		Each



	Dull Zinc-Plated Steel	4"	3"	No	No. 10	1941A21	00000


	Dull Zinc-Plated Steel	6"	3"	No	No. 10	1941A22	0000
	Polished 302 Stainless Steel	4"	3"	No	No. 10	1941A23	00000
	Polished 302 Stainless Steel	6"	3"	No	No. 10	1941A24	00000

Economy External-Grip Gear and Bearing Pullers

This low-capacity puller is often used to remove corroded battery terminals.

Two Jaws with Tips on One End

					Forcing Screw
For OD	Reach Lg.	Wt. Cap., lb.	Puller Material	T-Handle Material	Material	Overall Lg.	Thread Size	Jaw Overall Lg.	Jaw Tip Wd. × Jaw Tip Thk.	Includes		Each



	3/4" to 1 1/2"	1 3/4"	12	Steel	Steel	Steel	4 5/8"	3/8"-16	4"	3/16" × 3/16"	Forcing Screw with T-Handle	7455K3	00000

External-Grip Gear and Bearing Pullers

Grip bearings, gears, and wheels from the outside edge to pull them off a shaft.

Two Jaws with Tips on One End

					Forcing Screw					Adjustment Holes
For OD	Reach Lg.	Wt. Cap., ton	Puller Material	T-Handle Material	Material	Overall Lg.	Thread Size	Jaw Overall Lg.	Jaw Tip Wd. × Jaw Tip Thk.	No. of	Dia.	Includes		Each



	0" to 3 3/16"	3 3/16"	1 1/2	Steel	Steel	Steel	4.92"	M9 × 1.5 mm	4 1/32"	13/32" × 13/64"	1	11/64"	Forcing Screw with T-Handle	6340K711	000000

Three Jaws with Tips on One End

Puller with

T-Handle

					Forcing Screw					Adjustment Holes
For OD	Reach Lg.	Wt. Cap., ton	Puller Material	T-Handle Material	Material	Overall Lg.	Thread Size	Jaw Overall Lg.	Jaw Tip Wd. × Jaw Tip Thk.	No. of	Dia.	Includes		Each



	1/2" to 3 3/16"	3 3/16"	1 1/2	Steel	Steel	Steel	4 9/64"	M9 × 1.5 mm	4 1/32"	7/16" × 13/64"	1	11/64"	Forcing Screw with T-Handle	6340K721	000000

Quick-Hold External-Grip Gear and Bearing Pullers

Jaws stay aligned, so you can secure bearings and pulleys quickly. Use these pullers to grip bearings, gears, and wheels from the outside edge to pull them off a shaft.

Two Jaws with Tips on One End

Cage

Control

Pullers with two jaws have a flatter profile than pullers with more jaws, so they can fit in tighter spaces.

Cage Control—Pullers with a cage keep the jaws aligned.

Weight Capacity—Weight capacity is dependent on the material and thread size of the forcing screw. It should be used as a guide. If you can grip and reach an object, your puller will normally have enough power to pull it. When in doubt, choose the next larger puller size.

	Pullers													Replacement Jaws		Replacement Jaw Heads		Replacement Pins
						Forcing Screw
	For OD	Reach Lg.	Wt. Cap., ton	Puller Material	T-Handle Material	Material	Overall Lg.	Thread Size	Jaw Overall Lg.	Jaw Tip Wd. × Jaw Tip Thk.	Includes		Each		Each		Each		Each
Cage Control



		1/4" to 3 1/4"	2 1/4"	1	Steel	Steel	Steel	5 1/2"	5/16"-24	2 3/4"	11/32" × 1/8"	Forcing Screw T-Handle	6169K2	0000000	6169K137	000000	6169K123	000000	6169K136	000000


		1/4" to 4 1/4"	3"	2	Steel	Steel	Steel	7"	3/8"-24	3 1/2"	5/16" × 3/16"	Forcing Screw T-Handle	6169K415	000000	———	0	———	0	———	0
		1/2" to 5"	4"	2	Steel	Steel	Steel	9 5/8"	9/16"-16	5"	5/8" × 3/16"	Forcing Screw T-Handle	6169K311	000000	6169K324	00000	6169K313	000000	6169K322	00000
		1/2" to 7"	6"	6	Steel	Steel	Steel	12 3/4"	5/8"-14	7 1/4"	3/4" × 1/4"	Forcing Screw T-Handle	6169K13	000000	6169K144	00000	6169K133	000000	6169K142	00000
		3/4" to 12"	8"	12	Steel	Steel	Steel	16 1/4"	3/4"-14	9 1/2"	7/8" × 9/32"	Forcing Screw T-Handle	6169K17	000000	6169K174	00000	6169K183	000000	6169K162	00000
		1" to 15"	9 5/8"	14	Steel	Steel	Steel	19 1/4"	3/4"-14	11"	1" × 11/32"	Forcing Screw T-Handle	6169K15	000000	6169K164	00000	6169K153	000000	6169K162	00000
		1 1/2" to 30"	20"	25	Steel	Steel	Steel	26 1/4"	1 1/8"-14	12"	25/32" × 13/32"	Forcing Screw T-Handle	6169K417	00000000	———	0	———	0	———	0
		2 1/4" to 15 3/4"	16"	12	Steel	Steel	Steel	16 1/2"	3/4"-14	17 1/2"	11/16" × 7/16"	Forcing Screw T-Handle	6169K416	000000	———	0	———	0	———	0
		2 1/2" to 18"	12"	25	Steel	Steel	Steel	26"	1 1/8"-14	14"	1 1/4" × 1/2"	Forcing Screw T-Handle	6169K23	000000	6169K244	000000	6169K233	000000	6169K242	00000
		3" to 25"	14"	35	Steel	Steel	Steel	31 1/2"	1 1/4"-14	16 3/4"	1 7/16" × 11/16"	Forcing Screw T-Handle	6169K25	000000	6169K264	000000	6169K253	000000	6169K242	00000

Three Jaws with Tips on One End

Cage

Control

Pullers with three jaws are more stable and distribute their pulling force more evenly than pullers with two jaws. Use them when space allows.

Cage Control—Pullers with a cage keep the jaws aligned.

	Pullers													Replacement Jaws		Replacement Jaw Heads		Replacement Pins
						Forcing Screw
	For OD	Reach Lg.	Wt. Cap., ton	Puller Material	T-Handle Material	Material	Overall Lg.	Thread Size	Jaw Overall Lg.	Jaw Tip Wd. × Jaw Tip Thk.	Includes		Each		Each		Each		Each
Cage Control



		1/4" to 3 1/4"	2 1/4"	1	Steel	Steel	Steel	5 1/2"	5/16"-24	2 25/64"	1/4" × 1/8"	Forcing Screw T-Handle	6169K418	0000000	———	0	———	0	———	0


		1/4" to 4 1/2"	3"	2	Steel	Steel	Steel	7"	3/8"-24	3 1/2"	7/16" × 3/16"	Forcing Screw T-Handle	6169K1	000000	6169K114	000000	6169K113	000000	6169K112	000000
		1/2" to 5"	4"	5	Steel	Steel	Steel	9 5/8"	9/16"-16	5"	5/8" × 3/16"	Forcing Screw T-Handle	6169K32	000000	6169K324	00000	6169K323	000000	6169K322	00000
		1/2" to 7"	6"	10	Steel	Steel	Steel	12 3/4"	5/8"-14	7 1/4"	3/4" × 1/4"	Forcing Screw T-Handle	6169K14	000000	6169K144	00000	6169K143	000000	6169K142	00000
		3/4" to 12"	8"	17	Steel	Steel	Steel	16 1/4"	3/4"-14	9 1/2"	7/8" × 9/32"	Forcing Screw T-Handle	6169K18	000000	6169K174	00000	6169K173	000000	6169K162	00000
		1" to 15"	9 5/8"	20	Steel	Steel	Steel	19 1/4"	3/4"-14	11"	1" × 11/32"	Forcing Screw T-Handle	6169K16	000000	6169K164	00000	6169K163	000000	6169K162	00000
		2" to 38"	26"	40	Steel	Steel	Steel	31 3/4"	1 1/4"-14	27 3/4"	7/8" × 15/32"	Forcing Screw T-Handle	6169K21	00000000	———	0	———	0	———	0
		2 1/4" to 22"	16"	17	Steel	Steel	Steel	16 1/2"	3/4"-14	17 1/2"	11/16" × 7/16"	Forcing Screw T-Handle	6169K419	00000000	———	0	———	0	———	0
		2 1/2" to 18"	12"	30	Steel	Steel	Steel	26"	1 1/8"-14	14"	1 1/4" × 1/2"	Forcing Screw T-Handle	6169K24	000000	6169K244	000000	6169K243	000000	6169K242	00000
		3" to 25"	14"	40	Steel	Steel	Steel	31 1/2"	1 1/4"-14	16 3/4"	1 7/16" × 11/16"	Forcing Screw T-Handle	6169K26	00000000	6169K264	000000	6169K263	000000	6169K242	00000

Reversible-Jaw External/Internal-Grip Gear and Bearing Pullers

Grip objects on the outside or inside to tackle both types of pulling jobs. To grip objects on the outside, attach puller jaws with tips facing in. To grip objects from inside, attach the puller jaws with tips facing out. Use the slide hammer to extract hard-to-remove objects.

Combination 2/3 Jaws with Tips on One End

Image of Product. Front orientation. Contains Inset. Gear and Bearing Pullers. Reversible-Jaw External/Internal-Grip Gear and Bearing Pullers , Combination 2/3 Jaws with Tips on One End.

Puller has combination 2/3 jaws—it comes with a jaw bar so you can change between 2-jaw and 3-jaw configurations to suit your application.

For OD	Reach Lg.	Wt. Cap.	Puller Material	T-Handle Material	Includes		Each



1 1/4" to 4 1/4"	1" to 4 1/2"	1 1/4", 3"	Not Rated	Steel	Steel	T-Handle	6317K8	0000000

Accessories and Replacements for Pullers

Crossbar (For 1 ⅞"-5 ⅝" ID; For 1 ⅞"-5 ⅝" OD; For 0.375" Dia. Cap Screw)—Crossbar allows you to pull objects that have tapped holes. Thread the center hole onto the slide hammer; requires two 3/8" dia. cap screws (not included).

Replacement Jaw Bar (⅝"-18 Thread Size)—Replacement jaw bar converts the 3-jaw puller to a 2-jaw puller.

		Each
Crossbar (For 1 ⅞"-5 ⅝" ID; For 1 ⅞"-5 ⅝" OD; For 0.375" Dia. Cap Screw)	6317K6	000000
Internal Jaw (For ¾"-2 ½" ID; 2 ⅜" Reach)	6317K14	00000
External/Internal Jaw (For 1 ¼"-3 ½" ID; For 1"-4 ½" OD; 3 ¾" Reach)	6317K11	00000
External/Internal Jaw (For 1 ½"-4 ½" ID; For ¾"-5" OD; 4 ⅛" Reach)	6317K12	00000
External/Internal Jaw (For 2 ¾"-5 ½" ID; For ¾"-7 ½" OD; 6 ½" Reach)	6317K13	00000
2.5-lb. Slide Hammer (⅝"-18 Thread Size)	6317K1	00000
5-lb. Slide Hammer (⅝"-18 Thread Size)	6317K2	00000
Replacement Jaw Bar (⅝"-18 Thread Size)	6317K5	00000
Replacement Adjusting Cone	6317K274	00000

Nonsparking Packing Seal Pullers

Made of beryllium copper with an aluminum-bronze handle, these pullers satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. They also are nonmagnetic. The corkscrew tip twists into material to provide a firm hold while the handle provides the necessary leverage for pulling. Also known as packing extractors, they are often used to extract packing material from pump and valve seals.

Warning: Do not use these tools in direct contact with acetylene.

	Corkscrew Dia.	Tip Style	Grip Style	Material	Handle Material		Each
Rigid Shaft with T-Handle



	8"	1/8"	Corkscrew	Plain	Beryllium Copper	Aluminum Bronze	6491A12	000000

Quick-Hold External-Grip Gear and Bearing Puller Sets

Each puller has a cage around the jaws that keeps them in place for a quick job of gripping bearings and pulleys. Use them to grip bearings, gears, and wheels from the outside edge to pull them off a shaft.

Wt. Cap., ton	Puller Material	T-Handle Material	Forcing Screw Material	Includes		Each
5 to 20	Steel	Iron	Steel	2-Jaw Puller (For 1/2"-7" OD) 3-Jaw Puller (For 1"-14" OD) 3-Jaw Puller (For 1/2"-5" OD) 3-Jaw Puller (For 1/2"-7" OD) Forcing Screws T-Handles	6169K63	0000000

Jaw-End Roller Chain Pullers

T-Handle

These pullers grip both ends of a roller chain and draw them together so you can add or remove a link without fighting chain tension. They eliminate the need for a second person to hold chain ends in alignment, making field repairs and resizing faster.

					Overall
	For Roller Chain Trade No.	Handle Style	For Roller Chain Pitch	Max. Jaw Cap.	Lg.	Wd.	Material		Each
For Single-Strand ANSI Roller Chain



		40, 50, 60, 80	T-Handle	1/2" to 1"	3 1/2"	6 5/8"	4"	Steel	6052K18	000000


		80, 100, 120, 140, 160, 180, 200, 240	T-Handle	1" to 3"	5"	8 1/2"	5 3/4"	Steel	6052K16	00000

Changeable-Tip Packing Seal Pullers

Flexible Shaft with

T-Handle

Semi-Rigid Shaft with

T-Handle

Replace tips when they become worn or to use a different style. The handle provides the necessary leverage for pulling. Also known as packing extractors, they are often used to extract packing material from pump and valve seals. The corkscrew tip twists into material to provide a firm hold.

Flexible Shaft—Flexible-shaft pullers bend to access material in tight spots.

Semi-Rigid Shaft—Semi-rigid-shaft pullers bend slightly for access to material in tight spots but still get a firm grip.

	Corkscrew Dia.	Tip Mounting Thread Size	Tip Style	Grip Style	Material	Handle Material		Each
Flexible Shaft with T-Handle



	7"	1/4"	8-32	Corkscrew	Plain	Steel	Steel	9756K12	000000


	11"	5/16"	1/4"-20	Corkscrew	Plain	Steel	Steel	9756K14	00000
	14"	3/8"	1/4"-20	Corkscrew	Plain	Steel	Steel	9756K16	00000


	Semi-Rigid Shaft with T-Handle



			7"	1/4"	8-32	Corkscrew	Plain	Steel	Steel	9756K82	00000


			11"	5/16"	1/4"-20	Corkscrew	Plain	Steel	Steel	9756K84	00000
			14"	3/8"	1/4"-20	Corkscrew	Plain	Steel	Steel	9756K86	00000

Packing Seal Puller Tips


Machine Screw	Wood Screw	Corkscrew Tip

Brush Tip	Hook Tip

Corkscrew Tip—Corkscrew tips twist into material for a firm hold.

Wood Screw Tip—Wood screw tips are used to drill into and remove hardened packing when corkscrew tips are unable to get a secure hold on your material.

Machine Screw Tip—Machine screw tips thread into tapped holes. They're good for removing stuck or seized metallic components that can't be gripped easily.

Brush Tip—Brush tips have stiff bristles that clean debris out of cavities after material has been pulled out with a screw tip.

	Corkscrew Dia.	Screw Size	Thread Size	Brush Dia.	Tip Dia.	Material	Pkg. Qty.		Pkg.
Corkscrew Tip



	8-32	1/4"	—	—	—	—	Steel	1	9756K42	00000


	1/4"-20	5/16"	—	—	—	—	Steel	1	9756K44	0000
	1/4"-20	3/8"	—	—	—	—	Steel	1	9756K46	00000


	Wood Screw Tip



			8-32	—	3/16"	—	—	—	Steel	1	9756K52	0000


			1/4"-20	—	1/4"	—	—	—	Steel	1	9756K54	0000
			1/4"-20	—	5/16"	—	—	—	Steel	1	9756K56	0000


			Machine Screw Tip



					8-32	—	—	8-32, 10-24, 10-32	—	—	Steel	3	9756K72	0000


					1/4"-20	—	—	1/4"-20, 1/4"-28, 5/16"-18	—	—	Steel	3	9756K74	0000


					Brush Tip



							8-32	—	—	—	7/32", 5/16"	—	Steel	2	9756K62	00000


							1/4"-20	—	—	—	5/8", 11/16"	—	Steel	2	9756K64	00000


							Hook Tip



									8-32	—	—	—	—	0.083"	Steel	1	9756K88	0000


									1/4"-20	—	—	—	—	0.108"	Steel	1	9756K92	00000

Packing Seal Pullers

Flexible Shaft with

T-Handle

Pull material out of tight spots. Similar to removing a cork from a bottle, the tip twists into material for a firm hold while the handle provides the necessary leverage for pulling. Also known as packing extractors, they are often used to remove packing material from pump and valve seals.

Flexible Shaft—Flexible-shaft pullers bend to access material in tight spots.

	Corkscrew Dia.	Tip Style	Grip Style	Material	Handle Material	Mil. Spec.		Each
Flexible Shaft with T-Handle



	7"	3/16"	Corkscrew	Plain	Steel	Steel	Fed. Spec. GGG-E-950	9569K67	000000


	7 1/2"	1/4"	Corkscrew	Plain	Steel	Steel	Fed. Spec. GGG-E-950	9492K11	00000
	10 3/4"	5/16"	Corkscrew	Plain	Steel	Steel	Fed. Spec. GGG-E-950	9492K12	00000
	14 1/2"	3/8"	Corkscrew	Plain	Steel	Steel	Fed. Spec. GGG-E-950	9492K13	00000
	18"	1/2"	Corkscrew	Plain	Steel	Steel	Fed. Spec. GGG-E-950	9492K16	00000
	22"	3/8"	Corkscrew	Plain	Steel	Steel	Fed. Spec. GGG-E-950	9492K14	00000
	22"	5/8"	Corkscrew	Plain	Steel	Steel	Fed. Spec. GGG-E-950	9492K17	00000
	30"	3/8"	Corkscrew	Plain	Steel	Steel	Fed. Spec. GGG-E-950	9492K15	00000

T-Handle Tight-Hold Draw Latches


Style A	Style B	Style C	Replacement Latch Strike Plates

These latches are typically used to secure hoods and covers. Designed with a spring-loaded handle, they withstand vibration better than other standard latches for a more secure hold. The overall length listed includes the strike plate.

Style C—Style C latches have adjustable mounting bases, so you can mount them horizontally or vertically. Line up the base with the hook for horizontal mounting, or bend it perpendicular to the hook for vertical mounting.

Latches													Replacement Latch Strike Plates
				Overall				Mounting
Style	Material	Appearance	Latching Distance	Lg.	Wd.	Projection	Wt. Cap.	Fasteners Included	Screw Size	Features		Each		Each



	A	Black Painted Steel	—	3 1/4"	3 7/8"	2 11/16"	1 5/16"	Not Rated	No	1/4"	Spring-Loaded Handle	1344A21	00000	1344A17	00000


	A	Chrome-Plated Steel	Polished	3 1/4"	3 7/8"	2 11/16"	1 5/16"	Not Rated	No	1/4"	Spring-Loaded Handle	1344A22	0000	1344A18	0000
	A	304 Stainless Steel	Polished	3 1/4"	3 7/8"	2 11/16"	1 5/16"	Not Rated	No	1/4"	Spring-Loaded Handle	1344A23	00000	1344A19	0000
	B	Black Painted Steel	—	3 1/2"	4 1/2"	2 11/16"	1 5/16"	Not Rated	No	1/4"	Spring-Loaded Handle	1344A24	0000	1344A17	0000
	B	Chrome-Plated Steel	Polished	3 1/2"	4 1/2"	2 11/16"	1 5/16"	Not Rated	No	1/4"	Spring-Loaded Handle	1344A25	0000	1344A18	0000
	B	304 Stainless Steel	Polished	3 1/2"	4 1/2"	2 11/16"	1 5/16"	Not Rated	No	1/4"	Spring-Loaded Handle	1344A26	00000	1344A19	0000
	C	Black Painted Steel	—	2 3/4"	3 1/2"	1 15/16"	1 5/16"	Not Rated	No	1/4"	Spring-Loaded Handle	1344A27	00000	1344A17	0000