Filter by
Thread Size
Grip Style
Finish
Thread Spacing
Hardness
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Stud Material
Tensile Strength
T-Bolts
 |
Black-Oxide Steel |
Also known as tank-strap bolts, these T-bolts are commonly used with a band clamp or a strap to hold fuel tanks and other objects in place. The large T-shaped head provides a secure grip for steady tightening.
Black-Oxide Steel—Black-oxide steel T-bolts are mildly corrosion resistant in dry environments.
Coarse Thread—Coarse threads are the industry standard; choose these screws if you don’t know the threads per inch.
Length—Length is measured from the top of the head.
Thread Spacing—Match the thread spacing of mating components.
Head | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Lg. | Threading | Thread Spacing | Wd. | Thk. | Tensile Strength | Each | |||
Black-Oxide Steel | ||||||||||
| 1/4"-20 | 2 5/8" | Partially Threaded | Coarse | 1 1/4" | 1/4" | Not Rated | 91285A117 | 000000 | ||
Threaded-Hole Knobs
 |  |  |  |  |
Style 13 | Style 14 | Style 15 | Style 18 | Style 19 |
Style 13—Two-Arm Grip
|
Style 13 |
Thread | Head | Hub | Each | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Sz. | Dp. | Wd. | Ht. | Dia. | Ht. | Insert Material | Temp. Range, ° F | 1-9 | 10-Up | |||
Black Phenolic | ||||||||||||
| 1/4"-20 | 3/8" | 1 1/8" | 5/8" | 1/2" | 1/8" | Brass | -10 to 275 | 6477K57 | 00000 | 00000 | ||
| 1/4"-20 | 3/8" | 2" | 5/8" | 3/4" | 1/2" | Brass | -10 to 275 | 65035K59 | 0000 | 0000 | ||
| 1/4"-20 | 3/8" | 2 1/2" | 5/8" | 3/4" | 1/2" | Brass | -10 to 275 | 65035K32 | 0000 | 0000 | ||
Black Nylon | ||||||||||||
| 1/4"-20 | 1/2" | 2 1/2" | 5/8" | 3/4" | 1/2" | Brass | -15 to 150 | 65035K15 | 0000 | 0000 | ||
Black Polypropylene | ||||||||||||
| 1/4"-20 | 1/2" | 1 1/2" | 5/8" | 3/4" | 1/8" | Brass | -15 to 125 | 3708T11 | 0000 | 0000 | ||
Style 14—Two-Arm Grip
|
Style 14 |
Thread | Head | Hub | Each | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Sz. | Dp. | Wd. | Ht. | Dia. | Ht. | Insert Material | Temp. Range, ° F | 1-9 | 10-Up | |||
Black Polypropylene | ||||||||||||
| 1/4"-20 | 1/2" | 2 1/4" | 3/4" | 3/4" | 11/16" | Brass | -15 to 125 | 6477K69 | 00000 | 00000 | ||
Style 15—Two-Arm Grip
|
Style 15 |
Thread | Head | Hub | Each | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
Sz. | Dp. | Wd. | Ht. | Dia. | Ht. | 1-9 | 10-Up | |||
303 Stainless Steel | ||||||||||
| 1/4"-20 | 3/8" | 2" | 1/2" | 9/16" | 7/16" | 4276T44 | 000000 | 000000 | ||
Style 18—Two-Arm Grip
|
Style 18 |
Thread | Head | Hub | Each | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Sz. | Dp. | Wd. | Ht. | Dia. | Ht. | Insert Material | Temp. Range, ° F | 1-9 | 10-Up | |||
Black Polypropylene | ||||||||||||
| 1/4"-20 | 1/2" | 3" | 3/8" | 13/16" | 13/16" | Brass | -15 to 125 | 6477K73 | 00000 | 00000 | ||
Style 19—Two-Arm Grip
|
Style 19 |
ABS—Plastic knobs are a lightweight alternative to metal. They resist oil, grease, and solvents. ABS has excellent impact resistance.
Thread | Head | Hub | Each | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Sz. | Dp. | Wd. | Ht. | Dia. | Ht. | Insert Material | Temp. Range, ° F | 1-9 | 10-Up | |||
Black ABS | ||||||||||||
| 1/4"-20 | 3/8" | 1 1/4" | 13/16" | 5/8" | 1/2" | Brass | -15 to 125 | 6477K67 | 00000 | 00000 | ||
T-Bolts with Collar
 |
Also known as clamping pins, these bolts have a collar that slides along the shaft and can be welded in place to hold work and prevent over torquing. The large T-shaped head provides a secure grip for steady tightening. The black-oxide finish provides corrosion resistance in dry environments.
Length—Length is measured from the top of the head.
Head | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Lg. | Threading | Thread Spacing | Wd. | Thk. | Tensile Strength, psi | Each | |||
Black-Oxide Steel | ||||||||||
| 1/4"-20 | 4 3/8" | Partially Threaded | Coarse | 2 1/2" | 3/8" | 70,000 | 91660A130 | 000000 | ||
Threaded-Stud Knobs
 |  |  |  |
Style 7 | Style 8 | Style 10 | Style 11 |
Style 7—Two-Arm Grip
|
Style 7 |
Phenolic—Plastic knobs are a lightweight alternative to metal. They resist oil, grease, and solvents. Phenolic has good scratch resistance.
Nylon—Plastic knobs are a lightweight alternative to metal. They resist oil, grease, and solvents. Nylon has good wear resistance.
Head | Hub | Each | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Stud Lg. | Wd. | Ht. | Dia. | Ht. | Stud Material | Temp. Range, ° F | 1-9 | 10-99 | 100-Up | |||
Black Phenolic | |||||||||||||
| 1/4"-20 | 1/2" | 1 1/8" | 5/8" | 1/2" | 1/8" | Steel | -30 to 400 | 6477K32 | 00000 | 00000 | 00000 | ||
| 1/4"-20 | 9/16" | 2" | 5/8" | 3/4" | 1/2" | Steel | -30 to 400 | 65035K71 | 0000 | 0000 | 0000 | ||
| 1/4"-20 | 3/4" | 2" | 5/8" | 3/4" | 1/2" | Stainless Steel | -30 to 400 | 65035K23 | 0000 | 0000 | 0000 | ||
| 1/4"-20 | 1" | 2" | 5/8" | 3/4" | 1/2" | Steel | -30 to 400 | 65035K31 | 0000 | 0000 | 0000 | ||
| 1/4"-20 | 1" | 2 1/2" | 5/8" | 3/4" | 1/2" | Steel | -30 to 400 | 65035K34 | 0000 | 0000 | 0000 | ||
Black Nylon | |||||||||||||
| 1/4"-20 | 1" | 1 1/8" | 9/16" | 1/2" | 1/8" | Steel | -15 to 150 | 65035K14 | 0000 | 0000 | 0000 | ||
Style 8—Two-Arm Grip
|
Style 8 |
Polypropylene—Plastic knobs are a lightweight alternative to metal. They resist oil, grease, and solvents. Polypropylene has good impact resistance.
Head | Hub | Each | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Stud Lg. | Wd. | Ht. | Dia. | Ht. | Stud Material | Temp. Range, ° F | 1-9 | 10-99 | 100-Up | |||
Black Polypropylene | |||||||||||||
| 1/4"-20 | 1/2" | 2 1/4" | 3/4" | 3/4" | 11/16" | Steel | -15 to 125 | 65035K11 | 00000 | 00000 | 00000 | ||
Style 10—Two-Arm Grip
|
Style 10 |
Nylon—Plastic knobs are a lightweight alternative to metal. They resist oil, grease, and solvents. Nylon has good wear resistance.
Head | Hub | Each | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Stud Lg. | Wd. | Ht. | Dia. | Ht. | Stud Material | Temp. Range, ° F | 1-9 | 10-99 | 100-Up | |||
Black Nylon | |||||||||||||
| 1/4"-20 | 1/2" | 3" | 3/8" | 3/4" | 13/16" | Steel | -15 to 150 | 65035K36 | 00000 | 00000 | 00000 | ||
Style 11—Two-Arm Grip
|
Style 11 |
Polypropylene—Plastic knobs are a lightweight alternative to metal. They resist oil, grease, and solvents. Polypropylene has good impact resistance.
Head | Hub | Each | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Stud Lg. | Wd. | Ht. | Dia. | Ht. | Stud Material | Temp. Range, ° F | 1-9 | 10-99 | 100-Up | |||
Black Polypropylene | |||||||||||||
| 1/4"-20 | 1/2" | 1 1/4" | 3/4" | 1/2" | 1/8" | Steel | -15 to 125 | 65035K39 | 00000 | 00000 | 00000 | ||
T-Handle Retractable Spring Plungers
 |
With the widest grip, T-handles give you the most leverage of all our handles and are the easiest to grab with gloved or slippery hands. A tug manually retracts the nose so you can do everything from latching heavy, frequently-accessed doors to locking large cutting blades in place.
Spring plungers are available with or without a threadlocker. Those with a threadlocker won't wiggle loose from vibration. Spring plungers without a threadlocker are easier to remove.
Steel Nose—The strongest, most wear-resistant noses, these won't deform from stress and vibration. Steel is best for dry environments, however, since moisture will cause it to rust.
18-8 Stainless Steel Nose—The choice for wet and outdoor environments, 18-8 stainless steel resists rusting. It's strong enough for most jobs, but won't withstand stress and vibration as well as steel.
Twist-to-Lock—Free up both hands to adjust your workpiece or switch out parts without the plunger springing back and getting in the way. Pull back the handle and twist to lock the nose in its retracted position.
Nose | Nose Force, lbf | Body | Handle | Twist-to-Lock | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Thread Lg. | Extended Lg. | Dia. | Extended | Compressed | Material | Lg. | Material | Lg. | Each | |||
Steel Nose | |||||||||||||
| 1/4"-20 | 0.8" | 0.25" | 0.155" | 1 | 2.5 | Zinc-Plated Steel | 1.14" | Steel | 1 1/8" | 31265A16 | 000000 | ||
18-8 Stainless Steel Nose | |||||||||||||
| 1/4"-20 | 0.8" | 0.25" | 0.155" | 1 | 2.5 | 18-8 Stainless Steel | 1.14" | 18-8 Stainless Steel | 1 1/8" | 31265A56 | 00000 | ||
Vibration-Resistant Threaded Through-Hole Knobs
 |
Style 1 |
Like locknuts, these knobs have a nylon insert that grips threads to resist loosening. Long shafts can thread through these knobs for mounting versatility. Use the knobs as a grip to position, tighten, and hold fixtures, equipment, and machinery. Made of plastic, all resist oil, grease, and solvents.
Style 1—Two-Arm Grip
|
Style 1 |
Thread | Head | Hub | Each | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Sz. | Dp. | Wd. | Ht. | Dia. | Ht. | Insert Material | Temp. Range, ° F | 1-9 | 10-Up | |||
Black Polypropylene | ||||||||||||
| 1/4"-20 | 5/16" | 2" | 5/8" | 3/4" | 1/2" | Zinc-Plated Steel | -15 to 125 | 65035K41 | 00000 | 00000 | ||
Threaded Through-Hole Knobs
 |
Style 2 |
Long shafts can thread through these knobs for mounting versatility. The knobs provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery.
Style 2—Two-Arm Grip
|
Style 2 |
Thread | Head | Hub | Each | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Sz. | Dp. | Wd. | Ht. | Dia. | Ht. | Insert Material | Temp. Range, ° F | 1-9 | 10-Up | |||
Black Nylon | ||||||||||||
| 1/4"-20 | 3/8" | 1 1/8" | 9/16" | 1/2" | 1/8" | Brass | -15 to 150 | 6477K58 | 00000 | 00000 | ||
Handles for T-Slotted Framing
Pull Handles
 |  |
Pull Handles | Choose-a-Color Pull Handles |
Our most versatile handles. Fasten these anywhere along T-slotted rails.
Choose-a-Color—Identify equipment and components at a glance.
For Rail Ht. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Single | Double and Quad | Triple | Lg. | Projection | Mounting Fasteners Included | Choose a Color | Each | |||
Pull Handles | ||||||||||
Aluminum | ||||||||||
| 1", 1 1/2" | 2", 3" | 3", 4 1/2" | 5 1/4" | 2 1/16" | Yes | Silver | 47065T592 | 000000 | ||
| 1", 1 1/2" | 2", 3" | 3", 4 1/2" | 5 1/4" | 2 1/16" | Yes | Black | 47065T591 | 00000 | ||
| 1", 1 1/2", 40 mm | 2", 3", 80 mm | 3", 4 1/2", 120 mm | 7 3/16" | 2 1/4" | Yes | Silver | 47065T594 | 00000 | ||
| 1", 1 1/2", 40 mm | 2", 3", 80 mm | 3", 4 1/2", 120 mm | 7 3/16" | 2 1/4" | Yes | Black | 47065T593 | 00000 | ||
Plastic | ||||||||||
| 1" | 2" | 3" | 4 7/16" | 1 7/16" | Yes | Black | 47065T164 | 0000 | ||
| 1" | 2" | 3" | 4 7/16" | 1 7/16" | Yes | Red | 47065T595 | 00000 | ||
Choose-a-Color Pull Handles | ||||||||||
Plastic | ||||||||||
| 1 1/2", 40 mm | 3", 80 mm | 4 1/2", 120 mm | 5 3/4" | 1 11/16" | Yes | Gray, Orange, Red, Yellow | 3136N43 | 00000 | ||
| 1 1/2", 40 mm | 3", 80 mm | 4 1/2", 120 mm | 6 11/16" | 2" | Yes | Gray, Orange, Red, Yellow | 3136N42 | 00000 | ||
Offset Handles
 |
Offset |
Offset from the mounting surface so there's room to fully grasp these handles, even in tight spaces and on double doors.
For Rail Ht. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Single | Double and Quad | Triple | Lg. | Projection | Color | Mounting Fasteners Included | Each | |||
Offset | ||||||||||
Plastic | ||||||||||
| 1", 1 1/2" | 2", 3" | 3", 4 1/2" | 5 1/16" | 1 3/4" | Orange | Yes | 3136N577 | 000000 | ||
Multiport Threaded Diverting Valves
 |
Divert the flow of compressed air and other media to multiple pieces of equipment. Turn the handle to direct flow to multiple outlet ports. Valves cannot shut off flow.
Double L-Pattern Flow
 |
Valves with double L-pattern flow have two separate flow paths.
Mounting Holes | Overall | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Pipe Size | Flow Shut-Off | Handle Style | Flow Coefficient (Cv) | Max. Pressure @ Temp. | Valve Type | Temp. Range, ° F | Vacuum Rating | Seal Material | End-to-End Lg. | Mounting Fasteners Included | No. of | Thread Size | For Use With | Ht. | Lg. | Mounting Position | Each | |||
Brass Body | ||||||||||||||||||||
NPT Female Side × NPT Female Side × NPT Female Side × NPT Female Side | ||||||||||||||||||||
| 1/4 | No | T-Handle | Not Rated | 250 psi @ 70° F | Plug | -60 to 400 | Not Rated | Fluoroelastomer | 1 7/8" | No | 4 | 1/4"-20 | Air, Argon, Helium, Krypton, Neon, Oil, Water, Xenon | 2 7/8" | 3" | Any Angle, Horizontal, Vertical | 8159K543 | 0000000 | ||
T-Pattern Flow
 |
Valves with T-pattern flow direct flow from the inlet port to two of the three outlet ports at reduced capacity.
Mounting Holes | Overall | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Pipe Size | Flow Shut-Off | Handle Style | Flow Coefficient (Cv) | Max. Pressure @ Temp. | Valve Type | Temp. Range, ° F | Vacuum Rating | Seal Material | End-to-End Lg. | Mounting Fasteners Included | No. of | Thread Size | For Use With | Ht. | Lg. | Mounting Position | Each | |||
Brass Body | ||||||||||||||||||||
NPT Female Side × NPT Female Side × NPT Female Side × NPT Female Side | ||||||||||||||||||||
| 1/4 | No | T-Handle | Not Rated | 250 psi @ 70° F | Plug | -60 to 400 | Not Rated | Fluoroelastomer | 1 7/8" | No | 4 | 1/4"-20 | Air, Argon, Helium, Krypton, Neon, Oil, Water, Xenon | 2 7/8" | 3" | Any Angle, Horizontal, Vertical | 8159K542 | 0000000 | ||
