T-Slot Nuts
Designed to slide into T-slot tracks on machine tool tables, use these nuts to secure clamps and workpieces.
Fully threaded nuts allow a stud to extend beyond the bottom of the nut. Partially threaded nuts keep studs from traveling past the bottom of the nut and damaging your table.
Stainless steel nuts have excellent corrosion resistance. They are a good choice for use with stainless steel parts or in EDM applications.
For technical drawings and 3-D models, click on a part number.
Base | Fully Threaded | Partially Threaded | ||||||
|---|---|---|---|---|---|---|---|---|
| Thread Size  | For Slot Wd. | Ht. | Wd. | O'all Ht. | Each | Each | ||
Black-Oxide Steel | ||||||||
| 1/2"-13 | 9/16" | 11/32" | 7/8" | 5/8" | 000000000 | 00000 | 000000000 | 00000 |
| 1/2"-13 | 5/8" | 11/32" | 1" | 5/8" | 000000000 | 0000 | 000000000 | 0000 |
| 1/2"-13 | 5/8" | 3/8" | 1 1/8" | 3/4" | 000000000 | 0000 | 000000000 | 0000 |
| 1/2"-13 | 11/16" | 7/16" | 1 1/8" | 3/4" | 000000000 | 0000 | 000000000 | 0000 |
| 1/2"-13 | 3/4" | 15/32" | 1 1/4" | 3/4" | 000000000 | 0000 | 000000000 | 0000 |
18-8 Stainless Steel | ||||||||
| 1/2"-13 | 9/16" | 11/32" | 7/8" | 3/4" | 000000000 | 00000 | 000000000 | 00000 |
| 1/2"-13 | 5/8" | 3/8" | 1" | 3/4" | 000000000 | 00000 | 000000000 | 00000 |
| 1/2"-13 | 5/8" | 7/16" | 1 1/8" | 3/4" | 000000000 | 00000 | 000000000 | 00000 |
Secure-Hold T-Slot Nuts
After sliding the nut into a T-slot track, tighten the set screw to keep it in place. Use these nuts to secure clamps and workpieces in a machine table. They’re fully threaded to allow a stud to extend beyond the bottom of the nut.
For technical drawings and 3-D models, click on a part number.
Drop-In T-Slot Nuts
Install these nuts from the top of the T-slot track and secure with a quarter turn to anchor clamps and workpieces. Also known as quarter-turn T-slot nuts.
Fully threaded nuts allow a stud to extend beyond the bottom of the nut.
Partially threaded nuts keep studs from traveling past the bottom of the nut and damaging your table.
For technical drawings and 3-D models, click on a part number.
T-Slot Bolts
For quicker setups than a separate T-slot nut and stud, slide these bolts into T-slot tracks on machine tool tables.
Stainless steel bolts have excellent corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Head | Partially Threaded | |||||||
|---|---|---|---|---|---|---|---|---|
| Thread Lg. | Lg. | For Slot Wd. | Lg. | Wd. | Ht. | Min. Tensile Strength, psi | Each | |
Machined Neck—Steel | ||||||||
1/2"-13 | ||||||||
| 3/4" | 1 1/4" | 1/2" | 1 1/8" | 7/8" | 9/32" | 100,000 | 000000000 | 00000 |
| 1" | 1 1/2" | 1/2" | 1 1/8" | 7/8" | 9/32" | 100,000 | 000000000 | 0000 |
| 1 1/4" | 1 3/4" | 1/2" | 1 1/8" | 7/8" | 9/32" | 100,000 | 000000000 | 0000 |
| 1 1/2" | 2" | 1/2" | 1 1/8" | 7/8" | 9/32" | 100,000 | 000000000 | 0000 |
| 1 1/2" | 2 1/4" | 1/2" | 1 1/8" | 7/8" | 9/32" | 100,000 | 000000000 | 0000 |
| 1 1/2" | 2 1/2" | 1/2" | 1 1/8" | 7/8" | 9/32" | 100,000 | 000000000 | 0000 |
| 1 1/2" | 2 3/4" | 1/2" | 1 1/8" | 7/8" | 9/32" | 100,000 | 000000000 | 0000 |
| 1 1/2" | 3" | 1/2" | 1 1/8" | 7/8" | 9/32" | 100,000 | 000000000 | 0000 |
| 1 3/4" | 3 1/2" | 1/2" | 1 1/8" | 7/8" | 9/32" | 100,000 | 000000000 | 0000 |
| 1 3/4" | 4" | 1/2" | 1 1/8" | 7/8" | 9/32" | 100,000 | 000000000 | 0000 |
| 1 3/4" | 4 1/2" | 1/2" | 1 1/8" | 7/8" | 9/32" | 100,000 | 000000000 | 0000 |
| 1 3/4" | 5" | 1/2" | 1 1/8" | 7/8" | 9/32" | 100,000 | 000000000 | 0000 |
| 2" | 6" | 1/2" | 1 1/8" | 7/8" | 9/32" | 100,000 | 000000000 | 0000 |
Machined Neck—Black-Oxide Steel | ||||||||
1/2"-13 | ||||||||
| 3/4" | 1 1/4" | 1/2" | 1 1/4" | 7/8" | 5/16" | 140,000 | 000000000 | 00000 |
| 1" | 1 1/2" | 1/2" | 1 1/4" | 7/8" | 5/16" | 140,000 | 000000000 | 00000 |
| 1" | 1 3/4" | 1/2" | 1 1/4" | 7/8" | 5/16" | 140,000 | 000000000 | 00000 |
| 1" | 2" | 1/2" | 1 1/4" | 7/8" | 5/16" | 140,000 | 000000000 | 00000 |
| 1 1/4" | 2 1/2" | 1/2" | 1 1/4" | 7/8" | 5/16" | 140,000 | 000000000 | 00000 |
| 1 1/2" | 3" | 1/2" | 1 1/4" | 7/8" | 5/16" | 140,000 | 000000000 | 00000 |
| 1 1/2" | 3 1/2" | 1/2" | 1 1/4" | 7/8" | 5/16" | 140,000 | 000000000 | 00000 |
| 1 1/2" | 4" | 1/2" | 1 1/4" | 7/8" | 5/16" | 140,000 | 000000000 | 00000 |
| 2" | 5" | 1/2" | 1 1/4" | 7/8" | 5/16" | 140,000 | 000000000 | 00000 |
Machined Neck—18-8 Stainless Steel | ||||||||
1/2"-13 | ||||||||
| 1" | 1 1/2" | 1/2" | 1 1/8" | 7/8" | 9/32" | 90,000 | 000000000 | 00000 |
| 1 1/2" | 2" | 1/2" | 1 1/8" | 7/8" | 9/32" | 90,000 | 000000000 | 00000 |
| 1 1/2" | 3" | 1/2" | 1 1/8" | 7/8" | 9/32" | 90,000 | 000000000 | 00000 |
| 1 1/2" | 4" | 1/2" | 1 1/8" | 7/8" | 9/32" | 90,000 | 000000000 | 00000 |
Round Neck—Black-Oxide Steel | ||||||||
1/2"-13 | ||||||||
| 1" | 1 1/2" | 1/2" | 7/8" | 7/8" | 5/16" | 120,000 | 000000000 | 00000 |
| 1 1/2" | 2" | 1/2" | 7/8" | 7/8" | 5/16" | 120,000 | 000000000 | 00000 |
| 2" | 2 1/2" | 1/2" | 7/8" | 7/8" | 5/16" | 120,000 | 000000000 | 00000 |
| 2" | 3" | 1/2" | 7/8" | 7/8" | 5/16" | 120,000 | 000000000 | 00000 |
| 2" | 3 1/2" | 1/2" | 7/8" | 7/8" | 5/16" | 120,000 | 000000000 | 00000 |
| 2" | 4" | 1/2" | 7/8" | 7/8" | 5/16" | 120,000 | 000000000 | 00000 |
| 2" | 5" | 1/2" | 7/8" | 7/8" | 5/16" | 120,000 | 000000000 | 00000 |
T-Slot Nut and Setup Stud Kits
For mounting items to your machine table, these kits contain the full system of necessary components. Choose the kit with slot width matching that of your table.
Each kit includes T-slot nuts, setup studs, flange nuts, coupling nuts, and a T-slot cleaning tool.
T-Slot Nut | Setup Stud | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Slot Wd. | No. of Pieces | Includes | Threading | Base Ht. | Base Wd. | Overall Ht. | Threading | Min.Tensile Strength, psi | Material | Each | |
1/2"-13 Thread Size | |||||||||||
| 9/16" | 37 | 4 T-Slot Nuts 4 Setup Studs each in 3", 4", 5", 6", 7", and 8" Lengths 4 Flange Nuts 4 Coupling Nuts 1 T-Slot Cleaner | Partially Threaded | 11/32" | 7/8" | 5/8" | Threaded on Both Ends | 125,000 | Black-Oxide Steel | 0000000 | 000000 |
| 5/8" | 37 | 4 T-Slot Nuts 4 Setup Studs each in 3", 4", 5", 6", 7", and 8" Lengths 4 Flange Nuts 4 Coupling Nuts 1 T-Slot Cleaner | Partially Threaded | 11/32" | 1" | 5/8" | Threaded on Both Ends | 125,000 | Black-Oxide Steel | 0000000 | 00000 |
| 11/16" | 37 | 4 T-Slot Nuts 4 Setup Studs each in 3", 4", 5", 6", 7", and 8" Lengths 4 Flange Nuts 4 Coupling Nuts 1 T-Slot Cleaner | Partially Threaded | 7/16" | 1 1/8" | 3/4" | Threaded on Both Ends | 125,000 | Black-Oxide Steel | 0000000 | 000000 |
Fixturing Tables
Add components such as clamps, brackets, stops, rests, mounting plates, fixturing squares, risers, and V-blocks to build fixtures for welding and assembly.
For technical drawings and 3-D models, click on a part number.
Fasteners connect components to each other or to the table.
Thread | Head | Drive | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Shoulder Lg. | Size | Lg. | Dia. | Ht. | Size | Style | Material | Includes | Each | |
Shoulder Screw—5/8” Shoulder Dia. (-0.001” to 0”) | ||||||||||
| 1/2" | 1/2"-13 | 3/4" | 7/8" | 3/8" | 5/16" | Hex | Black-Oxide Steel | Nut, Washer | 0000000 | 00000 |
| 3/4" | 1/2"-13 | 3/4" | 7/8" | 3/8" | 5/16" | Hex | Black-Oxide Steel | Nut, Washer | 0000000 | 0000 |
| 7/8" | 1/2"-13 | 3/4" | 7/8" | 3/8" | 5/16" | Hex | Black-Oxide Steel | Nut, Washer | 0000000 | 0000 |
| 1" | 1/2"-13 | 3/4" | 7/8" | 3/8" | 5/16" | Hex | Black-Oxide Steel | Nut, Washer | 0000000 | 0000 |
| 1 1/4" | 1/2"-13 | 3/4" | 7/8" | 3/8" | 5/16" | Hex | Black-Oxide Steel | Nut, Washer | 0000000 | 0000 |
Economy Setup Clamp and T-Slot Fastener Kits
Good for occasional machining, economy kits contain lower-strength components than standard kits. Select a kit that matches your table's slot width. Kits include studs, setup clamps, step blocks, T-slot nuts, flange nuts, and coupling nuts.
Step Block | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| For Slot Wd. | No. of Pieces | Includes | Ht. Range | Wd. | T-Slot Nut Base Wd. | Material | Container Type | Each | |
1/2"-13 Thread Size | |||||||||
| 5/8" | 52 | 24 Studs (4 each in 3", 4", 5", 6", 7", and 8" lengths) 6 Step Setup Clamps (2 each in 2 1/2", 4", and 6" lengths) 3 Step Block Pairs 6 T-Slot Nuts 6 Flange Nuts 4 Coupling Nuts | 3/4"-6" | 1" | 1" | Steel | Wall-Mount Plastic Holder | 00000000 | 0000000 |
Setup Clamp and T-Slot Fastener Kits
Get everything needed for basic workholding on a machine table. Select a kit that matches your table's slot width. Each kit includes studs, setup clamps, step blocks, T-slot nuts, flange nuts, coupling nuts, and a T-slot cleaning tool.
Step Block | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| For Slot Wd. | No. of Pieces | Includes | Ht. Range | Wd. | T-Slot Nut Base Wd. | Material | Container Type | Each | |
1/2"-13 Thread Size | |||||||||
| 9/16" | 53 | 24 Studs (4 each in 3", 4", 5", 6", 7", and 8" lengths) 6 Step Setup Clamps (2 each in 2 1/2", 4", and 6" lengths) 3 Step Block Pairs 6 T-Slot Nuts 6 Flange Nuts 4 Coupling Nuts T-Slot Cleaner | 3/4"-6" | 1" | 7/8" | Steel | Wall-Mount Steel Holder | 0000000 | 0000000 |
| 5/8" | 53 | 24 Studs (4 each in 3", 4", 5", 6", 7", and 8" lengths) 6 Step Setup Clamps (2 each in 2 1/2", 4", and 6" lengths) 3 Step Block Pairs 6 T-Slot Nuts 6 Flange Nuts 4 Coupling Nuts T-Slot Cleaner | 3/4"-6" | 1" | 1" | Steel | Wall-Mount Steel Holder | 0000000 | 000000 |
| 11/16" | 53 | 24 Studs (4 each in 3", 4", 5", 6", 7", and 8" lengths) 6 Step Setup Clamps (2 each in 2 1/2", 4", and 6" lengths) 3 Step Block Pairs 6 T-Slot Nuts 6 Flange Nuts 4 Coupling Nuts T-Slot Cleaner | 3/4"-6" | 1" | 1 1/8" | Steel | Wall-Mount Steel Holder | 0000000 | 000000 |
Lathe Chuck Jaw Nuts
Secure jaws to a CNC lathe chuck with industry standard 1.5 mm × 60° serrations or wider 3 mm × 60° serrations.
Jaw nuts with inch and M14 threads fit most chucks made by Matsumoto.
For technical drawings and 3-D models, click on a part number.
Base | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Lathe Chuck Dia. | For Slot Wd. | Thread Size | Ht. | Lg. | Wd. | Overall Ht. | For Serration Size | Mounting Hole Ctr.-to-Ctr. | Material | Each | |
| 10" | 0.629" | 1/2"-13 | 5/16" | 2 3/64" | 57/64" | 57/64" | 1.5 mm × 60° | 1.26" | Steel | 0000000 | 000000 |