McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    69 Products

    T-Slot Nuts

    Slide into T-slot tracks on machine tool tables to secure clamps and workpieces. These nuts are often paired with setup studs for adjustable fixtures.
    Inch
    Image of Product. Front orientation. Contains Annotated. T-Slot Nuts.
    Black-Oxide Steel—Create a finished look with a dark, matte coating. These nuts offer minimal corrosion resistance, so they're best for dry environments.
    18-8 Stainless Steel—Stainless steel nuts have excellent corrosion resistance. They are a good choice for use with stainless steel parts or in EDM applications.
    Fully Threaded—Fully threaded nuts allow a stud to extend beyond the bottom of the nut.
    Partially Threaded—Partially threaded nuts keep studs from traveling past the bottom of the nut and damaging your table.
    Base
    Fully Threaded
    Partially
    Threaded
    For Slot
    Wd.
    Thread
    Size
    Lg.
    Wd.
    Ht.
    Overall
    Ht.
    Each
    Each
    Black-Oxide Steel
    13/16"3/4"-10
    		1 1/2"1 1/4"17/32"1"000000000000000000000000000000
    13/16"3/4"-10
    		1 1/2"1 1/4"9/16"1"00000000000000000000000000
    13/16"3/4"-10
    		1 1/2"1 3/8"9/16"1"0000000000000000000000000000
    7/8"3/4"-10
    		1 1/2"1 1/2"9/16"1"00000000000000000000000000
    7/8"3/4"-10
    		1 1/2"1 1/2"5/8"1"0000000000000000000000000000
    1"3/4"-10
    		1 1/2"1 1/2"3/4"1 1/4"0000000000000000000000000000
    1"3/4"-10
    		1 3/4"1 5/8"5/8"1"00000000000000000000000000
    1"3/4"-10
    		1 3/4"1 3/4"3/4"1 1/2"0000000000000000000000000000
    1 1/16"3/4"-10
    		2"1 5/8"11/16"1 1/8"0000000000000000000000000000
     
    18-8 Stainless Steel
    13/16"3/4"-10
    		1 3/4"1 1/4"9/16"1"00000000000000———0
    1"3/4"-10
    		1 3/4"1 5/8"5/8"1"00000000000000———0
    1 1/16"3/4"-10
    		1 3/4"1 5/8"11/16"1 1/8"00000000000000———0
     

    T-Slot Bolts

    For quicker setups than a separate T-slot nut and stud, slide these bolts into T-slot tracks on machine tool tables.
    Machined Neck
    Image of Product. Top orientation. Contains Annotated. T-Slot Bolts. Machined Neck.
    Flat surfaces on the neck fit securely in the T-slot so the bolt doesn't wobble.
    Black-Oxide Steel—Our strongest T-slot bolts. The dark, matte coating withstands occasional moisture.
    18-8 Stainless Steel—Won't rust or corrode from water or chemicals. These bolts may be mildly magnetic.
    Head
    Partially
    Threaded
    Lg.
    Thread
    Lg.
    Thread
    Size
    Lg.
    Wd.
    Ht.
    Min. Tensile
    Strength, psi
    Each
    Steel
     
    For 3/4" Wide Slots
    2"1 1/2"3/4"-10
    		1 1/2"1 1/4"7/16"100,00000000000000000
    2 1/2"1 1/2"3/4"-10
    		1 1/2"1 1/4"7/16"100,0000000000000000
    3"1 1/2"3/4"-10
    		1 1/2"1 1/4"7/16"100,0000000000000000
    3 1/2"1 3/4"3/4"-10
    		1 1/2"1 1/4"7/16"100,0000000000000000
    4"1 3/4"3/4"-10
    		1 1/2"1 1/4"7/16"100,0000000000000000
    4 1/2"1 3/4"3/4"-10
    		1 1/2"1 1/4"7/16"100,0000000000000000
    5"1 3/4"3/4"-10
    		1 1/2"1 1/4"7/16"100,0000000000000000
    6"2"3/4"-10
    		1 1/2"1 1/4"7/16"100,0000000000000000
    7"2"3/4"-10
    		1 1/2"1 1/4"7/16"100,0000000000000000
    8"2 1/2"3/4"-10
    		1 1/2"1 1/4"7/16"100,0000000000000000
    10"2 1/2"3/4"-10
    		1 1/2"1 1/4"7/16"100,00000000000000000
     
    For 7/8" Wide Slots
    2 1/2"1 1/2"3/4"-10
    		1 3/4"1 1/2"9/16"100,00000000000000000
    3"1 1/2"3/4"-10
    		1 3/4"1 1/2"9/16"100,00000000000000000
    3 1/2"2"3/4"-10
    		1 3/4"1 1/2"9/16"100,00000000000000000
    4"1 3/4"3/4"-10
    		1 3/4"1 1/2"9/16"100,00000000000000000
    4 1/2"2"3/4"-10
    		1 3/4"1 1/2"9/16"100,00000000000000000
    5"1 3/4"3/4"-10
    		1 3/4"1 1/2"9/16"100,00000000000000000
    6"2"3/4"-10
    		1 3/4"1 1/2"9/16"100,00000000000000000
    8"2 1/2"3/4"-10
    		1 3/4"1 1/2"9/16"100,00000000000000000
     
    Black-Oxide Steel
     
    For 3/4" Wide Slots
    2 1/2"1 1/2"3/4"-10
    		1 3/4"1 5/16"7/16"140,00000000000000000
    3"1 1/2"3/4"-10
    		1 3/4"1 5/16"7/16"140,00000000000000000
    3 1/2"1 1/2"3/4"-10
    		1 3/4"1 5/16"7/16"140,00000000000000000
    4"1 1/2"3/4"-10
    		1 3/4"1 5/16"7/16"140,00000000000000000
    4 1/2"1 1/2"3/4"-10
    		1 3/4"1 5/16"7/16"140,00000000000000000
    5"1 1/2"3/4"-10
    		1 3/4"1 5/16"7/16"140,00000000000000000
    6"1 1/2"3/4"-10
    		1 3/4"1 5/16"7/16"140,00000000000000000
    7"3"3/4"-10
    		1 3/4"1 5/16"7/16"140,00000000000000000
    8"1 1/2"3/4"-10
    		1 3/4"1 5/16"7/16"140,00000000000000000
    10"3"3/4"-10
    		1 3/4"1 5/16"7/16"140,00000000000000000
     
    18-8 Stainless Steel
     
    For 3/4" Wide Slots
    4"2"3/4"-10
    		1 1/2"1 1/4"7/16"90,00000000000000000
     
    Round Neck
    Image of Product. Top orientation. Contains Annotated. T-Slot Bolts. Round Neck.
    Easier to insert and reposition than machined necks.
    Black-Oxide Steel—Our strongest T-slot bolts. The dark, matte coating withstands occasional moisture.
    Head
    Partially
    Threaded
    Lg.
    Thread
    Lg.
    Thread
    Size
    Lg.
    Wd.
    Ht.
    Min. Tensile
    Strength, psi
    Each
    Black-Oxide Steel
     
    For 3/4" Wide Slots
    2 1/2"2"3/4"-10
    		1 5/16"1 5/16"17/32"120,000000000000000000
    3"2"3/4"-10
    		1 5/16"1 5/16"17/32"120,00000000000000000
    3 1/2"2"3/4"-10
    		1 5/16"1 5/16"17/32"120,00000000000000000
    4"2"3/4"-10
    		1 5/16"1 5/16"17/32"120,00000000000000000
    5"2"3/4"-10
    		1 5/16"1 5/16"17/32"120,00000000000000000
    6"2"3/4"-10
    		1 5/16"1 5/16"17/32"120,00000000000000000
    7"2"3/4"-10
    		1 5/16"1 5/16"17/32"120,00000000000000000
     

    Drop-In T-Slot Nuts

    Mount clamps and other fixtures to machine tool tables anywhere along the length of your T-slot track. These nuts install from the top and secure with a quarter turn, so you don’t have to slide them down the track’s length. They’re often paired with setup studs for adjustable fixtures. Also known as quarter-turn T-slot nuts.
    Inch
    Image of Product. Front orientation. Contains Annotated. T-Slot Nuts. Drop-In T-Slot Nuts.
    Black-Oxide Steel—Create a finished look with a dark, matte coating. These nuts offer minimal corrosion resistance, so they're best for dry environments.
    Fully Threaded—Fully threaded nuts allow a stud to extend beyond the bottom of the nut.
    Partially Threaded—Partially threaded nuts keep studs from traveling past the bottom of the nut and damaging your table.
    Base
    Fully Threaded
    Partially
    Threaded
    For Slot
    Wd.
    Thread
    Size
    Lg.
    Wd.
    Ht.
    Overall
    Ht.
    Each
    Each
    Black-Oxide Steel
    1"3/4"-10
    		1 3/4"1"39/64"1"0000000000000000000000000000
     

    Setup Clamp and T-Slot Fastener Kits

    Image of Product. Wood Stand and Metal Tray. Front orientation. Fixture Kits. Setup Clamp and T-Slot Fastener Kits, Metal Tray.

    Wood Stand and Metal Tray

    Get everything needed for basic workholding on a machine table. Select a kit that matches your table's slot width. Each kit includes studs, setup clamps, step blocks, T-slot nuts, flange nuts, coupling nuts, and a T-slot cleaning tool.
    Step
    Block
    For Slot
    Wd.
    No. of
    Pieces
    Includes
    Ht. Range
    Wd.
    T-Slot Nut
    Base Wd.
    Material
    Container Type
    Each
    3/4"-10
    13/16"494 T-Slot Nuts
    4 Flange Nuts
    4 Coupling Nuts
    3 Step Block Pairs
    6 Step Setup Clamps (2 each in 4", 6", and 8" lengths)
    24 Studs (4 each in 3", 4", 5", 6", 7", and 8" lengths)
    T-Slot Cleaner    		1 3/4" to 9"1 1/2"1 1/4"SteelWood Stand, Metal Tray0000000000000
    7/8"494 T-Slot Nuts
    4 Flange Nuts
    4 Coupling Nuts
    3 Step Block Pairs
    6 Step Setup Clamps (2 each in 4", 6", and 8" lengths)
    24 Studs (4 each in 3", 4", 5", 6", 7", and 8" lengths)
    T-Slot Cleaner    		1 3/4" to 9"1 1/2"1 1/2"SteelWood Stand, Metal Tray0000000000000
    1"494 T-Slot Nuts
    4 Flange Nuts
    4 Coupling Nuts
    3 Step Block Pairs
    6 Step Setup Clamps (2 each in 4", 6", and 8" lengths)
    24 Studs (4 each in 3", 4", 5", 6", 7", and 8" lengths)
    T-Slot Cleaner    		1 3/4" to 9"1 1/2"1 5/8"SteelWood Stand, Metal Tray0000000000000
    1 1/16"494 T-Slot Nuts
    4 Flange Nuts
    4 Coupling Nuts
    3 Step Block Pairs
    6 Step Setup Clamps (2 each in 4", 6", and 8" lengths)
    24 Studs (4 each in 3", 4", 5", 6", 7", and 8" lengths)
    T-Slot Cleaner    		1 3/4" to 9"1 1/2"1 5/8"SteelWood Stand, Metal Tray0000000000000
     

    T-Slot Fastener and Setup Stud Kits

    Image of Product. Front orientation. Fixture Kits. T-Slot Fastener and Setup Stud Kits.
    Image of Attribute. Front orientation. Contains Annotated. T-Slot Fastener and Setup Stud Kits.
    For mounting items to your machine table, these kits contain the full system of necessary components. Choose the kit with slot width matching that of your table.
    Each kit includes T-slot nuts, setup studs, flange nuts, coupling nuts, and a T-slot cleaning tool.
    T-Slot Nut
    Setup Stud
    For Slot
    Wd.
    No. of
    Pieces
    Includes
    Threading
    Base
    Ht.
    Base
    Wd.
    Overall
    Ht.
    Threading
    Min. Tensile
    Strength, psi
    Material
    Each
    3/4"-10
    13/16"374 T-Slot Nuts
    4 Setup Studs each in 3", 4", 5", 6", 7", and 8" Lengths
    4 Flange Nuts
    4 Coupling Nuts
    1 T-Slot Cleaner    		Partially Threaded9/16"1 1/4"1"Threaded on Both Ends125,000Black-Oxide Steel00000000000000
    7/8"374 T-Slot Nuts
    4 Setup Studs each in 3", 4", 5", 6", 7", and 8" Lengths
    4 Flange Nuts
    4 Coupling Nuts
    1 T-Slot Cleaner    		Partially Threaded9/16"1 1/2"1"Threaded on Both Ends125,000Black-Oxide Steel0000000000000
    1"374 T-Slot Nuts
    4 Setup Studs each in 3", 4", 5", 6", 7", and 8" Lengths
    4 Flange Nuts
    4 Coupling Nuts
    1 T-Slot Cleaner    		Partially Threaded5/8"1 5/8"1"Threaded on Both Ends125,000Black-Oxide Steel0000000000000
    1 1/16"374 T-Slot Nuts
    4 Setup Studs each in 3", 4", 5", 6", 7", and 8" Lengths
    4 Flange Nuts
    4 Coupling Nuts
    1 T-Slot Cleaner    		Partially Threaded11/16"1 5/8"1 1/8"Threaded on Both Ends125,000Black-Oxide Steel0000000000000
     

    Lathe Chuck Jaw Nuts

    Secure jaws to a CNC lathe chuck with industry standard 1.5 mm × 60° serrations or wider 3 mm × 60° serrations.
    Jaw Nuts with Inch Threads
    Image of Product. Front orientation. Contains Annotated. Lathe Chuck Jaw Nuts.
    Jaw nuts with inch and M14 threads fit most chucks made by Matsumoto.
    Base
    For Lathe
    Chuck Dia.
    For Slot
    Wd.
    Thread
    Size
    Ht.
    Lg.
    Wd.
    Overall
    Ht.
    For Serration
    Size
    Mounting Hole
    Ctr.-to-Ctr.
    Material
    Each
    15"0.865"3/4"-10
    		49/64"3 9/64"1 21/64"1 35/64"3 mm × 60°1.96"Steel0000000000000
    back to top