T-Slotted Framing Structural Brackets
Connect T-slotted rails and reinforce joints for structural stability. Fasteners are included.
For technical drawings and 3-D models, click on a part number.
Concealed brackets mount internally and stay out of sight once installed.
Tee concealed brackets thread directly into a T-slot and use the included fastener to secure.
For Rail Ht. | ||||||
|---|---|---|---|---|---|---|
| Single | Double and Quad | Color | Material | Mounting Fasteners Included | Each | |
| 30mm | 60mm | Silver | Zinc-Plated Steel | Yes | 00000000 | 00000 |
T-Slotted Framing Fasteners
Screw and nut sets or nuts secure brackets and other accessories to rails.
For technical drawings and 3-D models, click on a part number.
End-feed fasteners slide into the end of the rail to attach components.
Use double and triple fasteners to install brackets with multiple holes. They eliminate the need for a single nut and screw for each hole.
Self-aligning fasteners have a ridge that keeps them centered in the T-slot.
Drop-in fasteners can be placed directly into the T-slot to attach components—no need to disassemble your existing structure. They consist of a screw and nut.
Spring and spring-tab fasteners hold the nut in place so it won't slide down vertical rails.
Hammer fasteners drop in to the slot and turn into place when the screw is tightened. They're serrated to break the anodized coating on the rail, allowing static to dissipate.
Self-aligning fasteners have a ridge that keeps them centered in the T-slot.
For Rail Ht. | Nut | Mounting | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Single | Double and Quad | Triple | Color | Material | Hole Location | Thread Size  | Pkg. Qty. | Pkg. | |
Spring-Tab Nut | |||||||||
| 1" | 2" | 3" | Silver | Zinc-Plated Steel | Center | M6 | 4 | 00000000 | 00000 |
| 45mm | 90mm | __ | Silver | Zinc-Plated Steel | Center | M6 | 4 | 00000000 | 0000 |
Hammer Nut | |||||||||
| 1 1/2", 30mm, 40mm | 3", 60mm, 80mm | 4 1/2", 120mm | Silver | Zinc-Plated Steel | Center | M6 | 4 | 00000000 | 0000 |
| 30mm | 60mm | __ | Silver | 304 Stainless Steel | Center | M6 | 4 | 0000000 | 00000 |
| 45mm | 90mm | __ | Silver | Zinc-Plated 304 Stainless Steel | Center | M6 | 4 | 00000000 | 0000 |
| 45mm | 90mm | __ | Silver | Zinc-Plated Steel | Center | M6 | 4 | 00000000 | 0000 |
Self-Aligning Nut | |||||||||
| 1 1/2", 30mm, 40mm | 3", 60mm, 80mm | 4 1/2", 120mm | Silver | Zinc-Plated Steel | Center | M6 | 4 | 00000000 | 0000 |
T-Slotted Framing Mounting Brackets
Attach sensors, tubes, and other components to T-slotted framing rails and structures.
For technical drawings and 3-D models, click on a part number.
Threaded mounting bases attach threaded rod (sold separately) to a framing system.
For Rail Ht. | Thread | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Single | Double and Quad | Triple | Size | Lg., mm | Wd. | Lg. | Color | Material | Mounting Fasteners Included | Each | |
| 1" | 2" | 3" | M6 × 1mm | 16 | 1" | 1 3/4" | Black | Steel | Yes | 00000000 | 000000 |
T-Slot Nuts
Designed to slide into T-slot tracks on machine tool tables, use these nuts to secure clamps and workpieces.
Fully threaded nuts allow a stud to extend beyond the bottom of the nut. Partially threaded nuts keep studs from traveling past the bottom of the nut and damaging your table.
Stainless steel nuts have excellent corrosion resistance. They are a good choice for use with stainless steel parts or in EDM applications.
For technical drawings and 3-D models, click on a part number.
Base | Fully Threaded | Partially Threaded | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Thread Pitch, mm | For Slot Wd., mm | Ht., mm | Wd., mm | O'all Ht., mm | Specifications Met | Each | Each | ||
Black-Oxide Steel | ||||||||||
| M6 | 1 | 8 | 6 | 14 | 10 | __ | 000000000 | 00000 | 000000000 | 00000 |
| M6 | 1 | 10 | 6 | 16 | 11 | __ | 000000000 | 0000 | 000000000 | 0000 |
| M6 | 1 | 14 | 8 | 22 | 16 | DIN 508 | 000000000 | 0000 | 000000 | 00 |
18-8 Stainless Steel | ||||||||||
| M6 | 1 | 8 | 6 | 13 | 10 | DIN 508 | 000000000 | 0000 | 000000 | 00 |
Drop-In T-Slot Nuts
Install these nuts from the top of the T-slot track and secure with a quarter turn to anchor clamps and workpieces. Also known as quarter-turn T-slot nuts.
Fully threaded nuts allow a stud to extend beyond the bottom of the nut.
For technical drawings and 3-D models, click on a part number.
Thread | Base | Fully Threaded | |||||
|---|---|---|---|---|---|---|---|
| Size | Pitch, mm | For Slot Wd., mm | Ht., mm | Wd., mm | O'all Ht., mm | Each | |
Black-Oxide Steel | |||||||
| M6 | 1 | 8 | 6 | 13 | 10 | 000000000 | 00000 |
Secure-Hold T-Slot Nuts
After sliding the nut into a T-slot track, tighten the set screw to keep it in place. Use these nuts to secure clamps and workpieces in a machine table. They’re fully threaded to allow a stud to extend beyond the bottom of the nut.
For technical drawings and 3-D models, click on a part number.
T-Slot Bolts
For quicker setups than a separate T-slot nut and stud, slide these bolts into T-slot tracks on machine tool tables.
For technical drawings and 3-D models, click on a part number.
Head | Partially Threaded | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Thread Lg. | Lg. | For Slot Wd. | Lg. | Wd. | Ht. | Min. Tensile Strength, psi | Fastener Strength Grade/Class | Specifications Met | Each | |
Machined Neck—Black-Oxide Steel | ||||||||||
M6 × 1mm | ||||||||||
| 15mm | 25mm | 6mm | 10mm | 10mm | 4mm | 150,000 | Class 10.9 | DIN 787 | 000000000 | 000000 |
| 28mm | 40mm | 6mm | 10mm | 10mm | 4mm | 150,000 | Class 10.9 | DIN 787 | 000000000 | 00000 |
| 40mm | 63mm | 6mm | 10mm | 10mm | 4mm | 150,000 | Class 10.9 | DIN 787 | 000000000 | 00000 |
Lathe Chuck Jaw Nuts
Secure jaws to a CNC lathe chuck with industry standard 1.5 mm × 60° serrations or wider 3 mm × 60° serrations.
Jaw nuts with M6, M8, M10, M12, M16, and M20 threads fit most chucks made by Kitagawa, LMC, Samchully, Seoam, Auto Strong, and other brands.
For technical drawings and 3-D models, click on a part number.
Thread | Base | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Lathe Chuck Dia. | For Slot Wd. | Size | Pitch, mm | Ht. | Lg. | Wd. | Overall Ht. | For Serration Size | Mounting Hole Ctr.-to-Ctr. | Material | Each | |
| 4" | 0.315" | M6 | 1 | 11/64" | 61/64" | 29/64" | 17/32" | 1.5 mm × 60° | 0.591" | Steel | 0000000 | 000000 |