T-Slotted Framing Structural Brackets
Connect T-slotted rails and reinforce joints for structural stability. Fasteners are included.
Corner brackets are also known as angle brackets.
Extended brackets have more connection points for stronger connections than standard-length brackets.
Gusset brackets are reinforced to limit sway for more structural stability than standard corner brackets. Closed gusset brackets include a cover for a finished appearance and better dust protection than open gusset brackets.
Corner brackets are also known as angle brackets.
Outside corner and three-way outside corner brackets connect the ends of rails for a finished look at your corner. To install, tap the existing hole in the end of each rail and screw the bracket in.
| For Rail Ht. | Lg. | Color | Material | Required Tap Thread Size  | Rail Machining | Mounting Fasteners Included | Each | |
Three-Way Outside Corner for Four Slot Single Rails | ||||||||
|---|---|---|---|---|---|---|---|---|
| 20mm | 25/32" | Black | Powder-Coated Zinc | M5 | Required | Yes | 4844N63 | 000000 |
Use diagonal brace ends to make a brace of any length—a connecting rail (sold separately) between the brace ends is required. To install, use a tap (sold separately) to create a threaded hole, then fasten the brace end to a connecting rail using the included hardware.
| For Rail Ht. | Lg. | Color | Material | Required Tap Thread Size | Rail Machining | Mounting Fasteners Included | Pkg. Qty. | Pkg. | |
| 40mm | 2 1/16" | Silver | Zinc | M8 | Required | Yes | 2 | 5537T473 | 000000 |
Concealed brackets mount internally and stay out of sight once installed.
Corner concealed brackets slide into the T-slots of your two intersecting rails, leaving the outside surface slots open for mounting other components.
Concealed brackets mount internally and stay out of sight once installed.
Anchor concealed brackets allow positioning anywhere along the mating rail’s T-slot. Drill an installation hole in the face of one rail to install. Since the fastener is machined into the rail profile, these brackets create stronger connections than other brackets that don’t require machining. You can also use these brackets with our rails with machined bore holes.
For Rail Ht. | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Single | Double and Quad | Triple | Material | No. of Installation Holes Required | Required Installation Hole Dia. | Rail Machining | Mounting Fasteners Included | Each | |
Silver | |||||||||
| 1 1/2" | 3" | 4 1/2" | Zinc | 1 | 13/16" | Required | Yes | 47065T154 | 00000 |
| 1", 25mm | 2", 50mm | 3" | Zinc | 1 | 9/16" | Required | Yes | 47065T153 | 0000 |
| 20mm | 40mm | __ | Zinc | 1 | 12mm | Required | Yes | 5537T64 | 0000 |
| 30mm | 60mm | __ | Zinc | 1 | 20mm | Required | Yes | 5537T861 | 0000 |
| 40mm | 80mm | __ | Zinc | 1 | 20mm | Required | Yes | 5537T34 | 0000 |
| 45mm | 90mm | __ | Zinc | 1 | 20mm | Required | Yes | 5537T276 | 0000 |
Black | |||||||||
| 1 1/2" | 3" | 4 1/2" | Zinc | 1 | 13/16" | Required | Yes | 3136N238 | 0000 |
| 1", 25mm | 2", 50mm | 3" | Zinc | 1 | 9/16" | Required | Yes | 3136N237 | 0000 |
Concealed brackets mount internally and stay out of sight once installed.
Double anchor concealed brackets allow positioning anywhere along the mating rail’s T-slot. Drill installation holes in two faces of one rail to install. Since the fasteners are machined into the rail profile, these brackets create stronger connections than other brackets that don’t require machining.
Concealed brackets mount internally and stay out of sight once installed.
Double anchor concealed brackets allow positioning anywhere along the mating rail’s T-slot. Drill installation holes in two faces of one rail to install. Since the fasteners are machined into the rail profile, these brackets create stronger connections than other brackets that don’t require machining.
Concealed brackets mount internally and stay out of sight once installed.
Butt anchor concealed brackets join rails end-to-end to create longer rails. Drill an installation hole in the face of each rail to install. Since the fasteners are machined into the rail profile, these brackets create stronger connections than other brackets that don’t require machining.
For Rail Ht. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Single | Double and Quad | Triple | Color | Material | No. of Installation Holes Required | Required Installation Hole Dia. | Rail Machining | Mounting Fasteners Included | Each | |
| 1" | 2" | 3" | Silver | Zinc | 2 | 9/16" | Required | Yes | 47065T404 | 000000 |
| 1 1/2" | 3" | 4 1/2" | Silver | Zinc | 2 | 13/16" | Required | Yes | 5537T272 | 00000 |
| 20mm | 40mm | __ | Silver | Zinc | 2 | 12mm | Required | Yes | 5537T273 | 0000 |
| 30mm | 60mm | __ | Silver | Zinc | 2 | 20mm | Required | Yes | 5537T562 | 0000 |
| 40mm | 80mm | __ | Silver | Zinc | 2 | 20mm | Required | Yes | 5537T274 | 0000 |
| 45mm | 90mm | __ | Silver | Zinc | 2 | 20mm | Required | Yes | 5537T275 | 0000 |
Miniature T-Slotted Framing and Fittings
Build test fixtures, prototypes, and other small structures with this miniature version of T-slotted framing and fittings. The framing has continuous T-slots for attaching fittings with the included mounting fasteners.
Corner brackets are also known as angle brackets.
Extended brackets have more connection points for stronger connections than standard-length brackets.
To install outside corner and three-way outside corner brackets, tap the existing hole in the end of each rail and screw the bracket on.
Silver | ||||||||
|---|---|---|---|---|---|---|---|---|
| Corner Bracket Style | For Rail Ht., mm | Lg. | Rail Machining | Required Tap Thread Size | Mounting Fasteners Included | Includes | Each | |
| Corner | 10 | 31/64" | Not Required | __ | Yes | 2 Nuts, 2 Screws | 5969N42 | 00000 |
| Extended Corner | 10 | 51/64" | Not Required | __ | Yes | 4 Nuts, 4 Screws | 5969N43 | 0000 |
| Outside Corner | 10 | 13/32" | Required | M3 | Yes | 2 Caps, 2 Screws | 5969N31 | 0000 |
| Three-Way Outside Corner | 10 | 13/32" | Required | M3 | Yes | 3 Caps, 3 Screws | 5969N32 | 0000 |
Surface brackets connect rails without machining.
Extended brackets have more connection points for stronger connections than standard-length brackets.
Flush 90° angle brackets create a more finished appearance than standard 90° angle brackets. However, they are not as strong.
Silver | |||||||
|---|---|---|---|---|---|---|---|
| Surface Bracket Style | For Rail Ht., mm | Lg. | Rail Machining | Mounting Fasteners Included | Includes | Each | |
| Straight | 10 | 51/64" | Not Required | Yes | 2 Nuts, 2 Screws | 5969N35 | 00000 |
| Extended Straight | 10 | 1 37/64" | Not Required | Yes | 4 Nuts, 4 Screws | 5969N36 | 0000 |
| Square | 10 | 51/64" | Not Required | Yes | 4 Nuts, 4 Screws | 5969N37 | 0000 |
| 90° Angle | 10 | 1 3/16" | Not Required | Yes | 4 Nuts, 4 Screws | 5969N38 | 0000 |
| Flush 90° Angle | 10 | 1 3/16" | Not Required | Yes | 4 Nuts, 4 Screws | 5969N39 | 0000 |
| Tee | 10 | 1 3/16" | Not Required | Yes | 5 Nuts, 5 Screws | 5969N41 | 0000 |