T-Slotted Framing Structural Brackets
Connect T-slotted rails and reinforce joints for structural stability. Fasteners are included.
Corner brackets are also known as angle brackets.
Extended brackets have more connection points for stronger connections than standard-length brackets.
Adjustable-angle brackets let you mount one rail to another at many different angles.
Concealed adjustable-angle brackets connect rails flush to each other at any angle.
Offset adjustable-angle brackets use a bracket placed between the rails to mount one rail next to another at any angle, including parallel to the connected rail.
Rotating end-mount adjustable-angle brackets create a 90° connection between two rails that lets one rail rotate around its connection point.
Surface adjustable-angle brackets come in pairs and let you mount one rail next to another at any angle but not parallel to each other.
For Rail Ht. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Single | Double and Quad | Triple | Lg. | Color | Material | Required Tap Thread Size  | Rail Machining | Mounting Fasteners Included | Each | |
Concealed | ||||||||||
| 1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 1 1/2" | Silver | Zinc-Plated Steel | __ | Not Required | Yes | 4844N39 | 000000 |
Offset | ||||||||||
| 1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 25/32" | Silver | Zinc-Plated Aluminum | __ | Not Required | Yes | 4844N75 | 00000 |
Rotating End Mount | ||||||||||
| 1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 25/32" | Silver | Zinc-Plated Aluminum | M8 | Required | Yes | 4844N74 | 00000 |
Surface | ||||||||||
| 1 1/2" | 3" | 4 1/2" | 1 3/16" | Silver | Anodized 6063 Aluminum | __ | Not Required | Yes | 3136N169 | 00000 |
With ends mitered at a 45° angle, attach diagonal braces inside corners to create sturdier 90° connections than other brackets to reinforce your structures.
Concealed brackets mount internally and stay out of sight once installed.
Straight concealed brackets slide into T-slots.
For Rail Ht. | ||||||||
|---|---|---|---|---|---|---|---|---|
| Single | Double and Quad | Triple | Color | Material | Rail Machining | Mounting Fasteners Included | Each | |
| 1 1/2", 40mm | 3", 80mm | 4 1/2" | Silver | Zinc-Plated Steel | Not Required | Yes | 5537T294 | 00000 |
Concealed brackets mount internally and stay out of sight once installed.
Corner concealed brackets slide into the T-slots of your two intersecting rails, leaving the outside surface slots open for mounting other components.
For Rail Ht. | ||||||||
|---|---|---|---|---|---|---|---|---|
| Single | Double and Quad | Triple | Color | Material | Rail Machining | Mounting Fasteners Included | Each | |
| 1 1/2", 30mm, 40mm | 3", 60mm, 80mm | 4 1/2" | Silver | Zinc | Not Required | Yes | 5537T316 | 00000 |
Concealed brackets mount internally and stay out of sight once installed.
Extended corner concealed brackets have more connection points for stronger connections than standard-length brackets. They slide into the T-slots of your two intersecting rails, leaving the outside surface slots open for mounting other components. Tighten the included set screws to hold them in place.
For Rail Ht. | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Single | Double and Quad | Triple | Lg. | Color | Material | Rail Machining | Mounting Fasteners Included | Each | |
| 1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 2 1/2" | Silver | Anodized 6063 Aluminum | Not Required | Yes | 3136N248 | 000000 |
Concealed brackets mount internally and stay out of sight once installed.
Tee concealed brackets thread directly into a T-slot and use the included fastener to secure.
For Rail Ht. | ||||||||
|---|---|---|---|---|---|---|---|---|
| Single | Double and Quad | Triple | Color | Material | Rail Machining | Mounting Fasteners Included | Each | |
| 1 1/2", 40mm | 3", 80mm | 4 1/2" | Silver | Zinc-Plated Steel | Not Required | Yes | 47065T339 | 000000 |
Concealed brackets mount internally and stay out of sight once installed.
Anchor concealed brackets allow positioning anywhere along the mating rail’s T-slot. Drill an installation hole in the face of one rail to install. Since the fastener is machined into the rail profile, these brackets create stronger connections than other brackets that don’t require machining. You can also use these brackets with our rails with machined bore holes.
Concealed brackets mount internally and stay out of sight once installed.
Butt anchor concealed brackets join rails end-to-end to create longer rails. Drill an installation hole in the face of each rail to install. Since the fasteners are machined into the rail profile, these brackets create stronger connections than other brackets that don’t require machining.
For Rail Ht. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Single | Double and Quad | Triple | Color | Material | No. of Installation Holes Required | Required Installation Hole Dia. | Rail Machining | Mounting Fasteners Included | Each | |
| 1 1/2" | 3" | 4 1/2" | Silver | Zinc | 2 | 13/16" | Required | Yes | 5537T272 | 000000 |
Easy-adjust plate connector concealed brackets have fasteners that remain accessible after installation to simplify position changes. Often used to make shelf supports or cross bars to reinforce a structure, they create a structural bracket connection point on the end of one rail that can attach at a 90° angle along another rail. Install these brackets into the tapped end of a rail. Then, slide the spring-loaded ball nut into the slot on the other rail. Finally, fasten the outside bracket to the nut to connect the rails. You’ll get two brackets with all the included hardware.
For Rail Ht. | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Single | Double and Quad | Triple | Color | Material | Required Tap Thread Size | Rail Machining | Mounting Fasteners Included | Each | |
| 1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | Silver | Zinc-Plated Steel | M8 | Required | Yes | 4844N68 | 000000 |
Concealed brackets mount internally and stay out of sight once installed.
Miter concealed brackets connect rails with 45° or 90° miters. Slide them into the T-slots and tighten them in place with the included set screws.
For Rail Ht. | ||||||||
|---|---|---|---|---|---|---|---|---|
| Single | Double and Quad | Triple | Color | Material | Rail Machining | Mounting Fasteners Included | Each | |
45° Angle Alignment Style | ||||||||
| 1 1/2", 30mm, 40mm | 3", 60mm, 80mm | 4 1/2", 120mm | Silver | Zinc-Plated Steel | Not Required | Yes | 4844N18 | 000000 |
90° Angle Alignment Style | ||||||||
| 1 1/2", 30mm, 40mm | 3", 60mm, 80mm | 4 1/2", 120mm | Silver | Zinc-Plated Steel | Not Required | Yes | 4844N21 | 00000 |
Concealed anchors mount internally and stay out of sight once installed.
Miter butt anchors create the strongest miter connection because the fasteners are machined into the rail profiles. Use them to join rails with 60°, 90°, and 180° miters. Drill an installation hole in the face of each rail to install.
For Rail Ht. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Single | Double and Quad | Triple | Color | Material | Includes | No. of Installation Holes Required | Required Installation Hole Dia. | Rail Machining | Mounting Fasteners Included | Each | |
| 1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | Silver | Zinc-Plated Steel | Hole Covers | 2 | 14.2mm | Required | Yes | 4844N69 | 000000 |