T-Slotted Framing Structural Brackets
Connect T-slotted rails and reinforce joints for structural stability. Fasteners are included.
For technical drawings and 3-D models, click on a part number.
Corner brackets are also known as angle brackets.
Extended brackets have more connection points for stronger connections than standard-length brackets.
Gusset brackets are reinforced to limit sway for more structural stability than standard corner brackets. Open gusset brackets give you easy access to the fasteners, which is useful if your application requires frequent adjustments. Closed gusset brackets include a cover for a finished appearance and better dust protection than open gusset brackets.
| For Rail Ht. | Lg. | Rail Machining | Mounting Fasteners Included | Material | Each | |
Silver | ||||||
|---|---|---|---|---|---|---|
Corner | ||||||
| 45mm, 60mm | 1 3/4" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
Extended Corner | ||||||
| 45mm, 60mm | 3 1/2" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
Open Gusset | ||||||
| 45mm, 60mm | 1 49/64" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
Extended Open Gusset | ||||||
| 45mm, 60mm | 3 1/2" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
Closed Gusset | ||||||
| 45mm, 60mm | 1 39/64" | Not Required | Yes | 6063 Aluminum | 00000000 | 00000 |
Extended Closed Gusset | ||||||
| 45mm, 60mm | 3" | Not Required | Yes | Powder-Coated Zinc | 0000000 | 00000 |
Black | ||||||
Corner | ||||||
| 45mm, 60mm | 1 3/4" | Not Required | Yes | Powder-Coated 6063 Aluminum | 00000000 | 0000 |
Extended Corner | ||||||
| 45mm, 60mm | 3 1/2" | Not Required | Yes | Powder-Coated 6063 Aluminum | 00000000 | 00000 |
Open Gusset | ||||||
| 45mm, 60mm | 1 49/64" | Not Required | Yes | Powder-Coated 6063 Aluminum | 00000000 | 0000 |
Extended Open Gusset | ||||||
| 45mm, 60mm | 3 35/64" | Not Required | Yes | Powder-Coated Aluminum | 0000000 | 00000 |
Closed Gusset | ||||||
| 45mm, 60mm | 1 5/8" | Not Required | Yes | Powder-Coated Aluminum | 0000000 | 00000 |
Corner brackets are also known as angle brackets.
Gusset brackets are reinforced to limit sway for more structural stability than standard corner brackets. Open gusset brackets give you easy access to the fasteners, which is useful if your application requires frequent adjustments.
Silver | ||||||
|---|---|---|---|---|---|---|
| For Rail Ht. | Lg. | Rail Machining | Mounting Fasteners Included | Material | Each | |
Open Gusset | ||||||
| 45mm | 1 49/64" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 000000 |
Corner brackets are also known as angle brackets.
Outside corner and three-way outside corner brackets connect the ends of rails for a finished look at your corner. To install, tap the existing hole in the end of each rail and screw the bracket in.
| For Rail Ht. | Lg. | Color | Material | Required Tap Thread Size | Rail Machining | Mounting Fasteners Included | Each | |
Outside Corner for Four Slot Single Rails | ||||||||
|---|---|---|---|---|---|---|---|---|
| 45mm | 1 3/4" | Silver | Lacquer-Coated 6063 Aluminum | M12 | Required | Yes | 00000000 | 000000 |
Three-Way Outside Corner for Four Slot Single Rails | ||||||||
| 45mm | 1 3/4" | Silver | Lacquer-Coated 6063 Aluminum | M12 | Required | Yes | 00000000 | 00000 |
Surface brackets create strong connection points because they secure to the surface of rails.
Straight brackets are simple brackets that can be used to make 90°, end-to-end, and parallel connections.
Countersunk straight brackets have a more finished appearance than brackets with straight mounting holes because their fasteners sit flush with the brackets. The screw heads won’t get in the way of your other components.
Extended brackets have more connection points for stronger connections than standard-length brackets.
90° angle brackets make a corner or create another 90° connection along your rail.
Flush tee and flush 90° angle brackets create a finished appearance. However, they are not as strong as standard tee or 90° angle brackets.
| For Rail Ht. | Lg. | Rail Machining | Mounting Fasteners Included | Material | Each | |
Silver | ||||||
|---|---|---|---|---|---|---|
Straight | ||||||
| 45mm, 60mm | 3 3/8" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
Countersunk Straight | ||||||
| 45mm, 60mm | 3 9/16" | Not Required | Yes | Powder-Coated Steel | 0000000 | 00000 |
Extended Straight | ||||||
| 45mm, 60mm | 6 7/8" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
90° Angle | ||||||
| 45mm | 5 1/4" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
Extended 90° Angle | ||||||
| 45mm | 5 5/16" | Not Required | Yes | Anodized 6105 Aluminum | 0000000 | 00000 |
Cross | ||||||
| 45mm, 60mm | 8 7/8" | Not Required | Yes | Anodized 6105 Aluminum | 00000000 | 00000 |
Tee | ||||||
| 45mm, 60mm | 5 1/8" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
Flush Tee | ||||||
| 45mm, 60mm | 5 5/16" | Not Required | Yes | Anodized 6105 Aluminum | 00000000 | 00000 |
Flush 90° Angle | ||||||
| 45mm | 5 5/16" | Not Required | Yes | Anodized 6105 Aluminum | 00000000 | 00000 |
Black | ||||||
Straight | ||||||
| 45mm, 60mm | 3 3/8" | Not Required | Yes | Powder-Coated 6063 Aluminum | 00000000 | 00000 |
Countersunk Straight | ||||||
| 45mm, 60mm | 3 9/16" | Not Required | Yes | Powder-Coated Steel | 0000000 | 00000 |
Extended Straight | ||||||
| 45mm, 60mm | 6 7/8" | Not Required | Yes | Powder-Coated 6063 Aluminum | 00000000 | 00000 |
90° Angle | ||||||
| 45mm | 5 1/4" | Not Required | Yes | Powder-Coated 6063 Aluminum | 00000000 | 00000 |
Extended 90° Angle | ||||||
| 45mm | 5 5/16" | Not Required | Yes | Anodized 6105 Aluminum | 0000000 | 00000 |
Tee | ||||||
| 45mm, 60mm | 5 1/8" | Not Required | Yes | Powder-Coated 6063 Aluminum | 00000000 | 00000 |
Flush 90° Angle | ||||||
| 45mm, 60mm | 5 5/16" | Not Required | Yes | Anodized 6105 Aluminum | 0000000 | 00000 |
Adjustable-angle brackets let you mount one rail to another at many different angles.
Reducer brackets connect rails of different rail heights.
| For Rail Ht., mm | Lg. | Color | Material | Rail Machining | Mounting Fasteners Included | Each | |
| 40, 45 | 1 1/2" | Silver | Zinc-Plated Steel | Not Required | Yes | 0000000 | 000000 |
Concealed brackets mount internally and stay out of sight once installed.
Straight concealed brackets slide into T-slots.
For Rail Ht. | |||||||
|---|---|---|---|---|---|---|---|
| Single | Double and Quad | Color | Material | Rail Machining | Mounting Fasteners Included | Each | |
| 45mm | 90mm | Silver | Zinc-Plated Steel | Not Required | Yes | 00000000 | 00000 |
Concealed brackets mount internally and stay out of sight once installed.
Corner concealed brackets slide into the T-slots of your two intersecting rails, leaving the outside surface slots open for mounting other components.
For Rail Ht. | |||||||
|---|---|---|---|---|---|---|---|
| Single | Double and Quad | Color | Material | Rail Machining | Mounting Fasteners Included | Each | |
| 45mm | 90mm | Silver | Zinc | Not Required | Yes | 00000000 | 00000 |
Concealed brackets mount internally and stay out of sight once installed.
Tee concealed brackets thread directly into a T-slot and use the included fastener to secure.
For Rail Ht. | |||||||
|---|---|---|---|---|---|---|---|
| Single | Double and Quad | Color | Material | Rail Machining | Mounting Fasteners Included | Each | |
| 45mm | 90mm | Silver | Zinc-Plated Steel | Not Required | Yes | 00000000 | 000000 |
Concealed brackets mount internally and stay out of sight once installed.
Anchor concealed brackets allow positioning anywhere along the mating rail’s T-slot. Drill an installation hole in the face of one rail to install. Since the fastener is machined into the rail profile, these brackets create stronger connections than other brackets that don’t require machining. You can also use these brackets with our rails with machined bore holes.
For Rail Ht. | Silver | |||||||
|---|---|---|---|---|---|---|---|---|
| Single | Double and Quad | Material | No. of Installation Holes Required | Required Installation Hole Dia. | Rail Machining | Mounting Fasteners Included | Each | |
| 45mm | 90mm | Zinc | 1 | 20mm | Required | Yes | 00000000 | 00000 |
Concealed brackets mount internally and stay out of sight once installed.
Butt anchor concealed brackets join rails end-to-end to create longer rails. Drill an installation hole in the face of each rail to install. Since the fasteners are machined into the rail profile, these brackets create stronger connections than other brackets that don’t require machining.
For Rail Ht. | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Single | Double and Quad | Color | Material | No. of Installation Holes Required | Required Installation Hole Dia. | Rail Machining | Mounting Fasteners Included | Each | |
| 45mm | 90mm | Silver | Zinc | 2 | 20mm | Required | Yes | 00000000 | 00000 |
Concealed brackets mount internally and stay out of sight once installed.
Tabbed concealed brackets require one hole to install the connector and one drilled access hole in the mating rail to secure the connection. You can also use these brackets with our machined rails with tapped or access holes. Brackets without a required tap thread size include thread-forming screws so you won't need to tap the end of your rail to install the connector. However, this connection is not as strong as the connections with a tapped hole.
| For Rail Ht. | Color | Material | Required Access Hole Dia. | Rail Machining | Mounting Fasteners Included | Each | |
Tabbed Concealed Brackets | |||||||
|---|---|---|---|---|---|---|---|
| 45mm | Silver | Zinc-Plated Steel | 9.5mm | Required | Yes | 00000000 | 00000 |
Concealed brackets mount internally and stay out of sight once installed.
Easy-install tabbed concealed brackets come with a self-tapping screw, so you won't need to tap the end of your rail or drill an acess hole to make 90° and corner connections. Position them anywhere along the length of your rail. Their connections are stronger than corner concealed brackets and tabbed concealed brackets but not quite as strong as anchor brackets.
For Rail Ht., mm | |||||||
|---|---|---|---|---|---|---|---|
| Single | Double and Quad | Color | Material | Rail Machining | Mounting Fasteners Included | Each | |
| 45 | 90 | Silver | Zinc-Plated Zinc | Not Required | Yes | 0000000 | 00000 |
Concealed brackets mount internally and stay out of sight once installed.
Plate connector concealed brackets create a structural bracket connection point on the end of one rail that can attach at a 90° angle along another rail. They have a screw on one side and a T-slot nut on the other. Tap a hole in the end of one rail and thread in the screw. Then slide the T-slot nut into the slot of the other rail. Brackets with no required tap thread size include thread-forming screws.
For Rail Ht., mm | |||||||
|---|---|---|---|---|---|---|---|
| Single | Double and Quad | Color | Material | Rail Machining | Mounting Fasteners Included | Each | |
| 45 | 90 | Silver | 6063 Aluminum | Not Required | Yes | 00000000 | 000000 |
Concealed brackets mount internally and stay out of sight once installed.
Miter concealed brackets connect rails with 45° or 90° miters. Slide them into the T-slots and tighten them in place with the included set screws.
Concealed anchors mount internally and stay out of sight once installed.
Miter anchors connect rails with 30°-90° miters. Drill an access hole in each rail and slide the connector into the center hole, then thread the set screws into the T-nuts, through the access holes, and into the connector.
For Rail Ht., mm | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Single | Double and Quad | Color | Material | No. of Installation Holes Required | Required Installation Hole Dia., mm | Rail Machining | Mounting Fasteners Included | Each | |
| 45 | 90 | Silver | Zinc-Plated Steel | 2 | 8 | Required | Yes | 00000000 | 00000 |
Concealed connectors mount internally and stay out of sight once installed.
Butt and extended butt connectors join rails end-to-end to extend the length of rails without machining. Slide the connectors into a T-slot and tighten the screws to install.
Extended connectors have more connection points for stronger connections than standard-length brackets.
For Rail Ht. | ||||||||
|---|---|---|---|---|---|---|---|---|
| Single | Double and Quad | Lg. | Color | Material | Rail Machining | Mounting Fasteners Included | Each | |
Extended Butt Connector | ||||||||
| 45mm | 90mm | 7" | Silver | Zinc-Plated Steel | Not Required | Yes | 00000000 | 000000 |
T-Slotted Framing Mounting Brackets
Attach sensors, tubes, and other components to T-slotted framing rails and structures.
For technical drawings and 3-D models, click on a part number.
Tabletop brackets secure tabletops to workbenches and carts.
| For Rail Ht. | Lg. | Color | Material | Mounting Fasteners Included | Each | |
| 45mm | 1 3/4" | Silver | Anodized Aluminum | Yes | 00000000 | 00000 |