Tab Weld Nuts | McMaster-Carr

Filter by

System of Measurement

Thread Size

Material

Nut Type

Weld Nut Shape

Base Width

Base Thickness

Barrel Height

Hole Diameter

Height

Number of Projections

Thread Type

Thread Direction

Width

Thread Spacing

Thread Fit

Unified Standard Class 1B

Unified Standard Class 2B

Thread Pitch

Base Diameter

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

DFARS Specialty Metals

RoHS

Export Control Classification Number (ECCN)

REACH

Tube OD

589 Products

Weld Nut Shape

Hex

With three evenly spaced projections for consistent welding

73 products

Square

The strongest hold in our offering

32 products

Weld Nut Shape

Rectangle

Add permanent threads in narrow spaces

235 products

Round

No edges to snag on nearby objects, plus a smooth appearance

237 products

Low-Profile Rectangular Weld Nuts

Weld permanent threads in channels and other tight spaces without adding a barrel bump that gets in the way. These nuts have a short barrel that tucks under low surfaces and a slim footprint that fits between narrow channel walls.

Steel—Best for dry environments since moisture will cause them to rust. Made of uncoated steel, these nuts require minimal prep. Weld them to uncoated steel surfaces.

18-8 Stainless Steel—Suitable for outdoor use, these nuts resist rust from water and mild chemicals. Weld them to stainless steel surfaces.

Number of Projections—More projections lead to more consistent welds by concentrating heat and protecting the threads from deforming.

			Base			Barrel
	Thread Size	No. of Projections	Lg.	Wd.	Thk.	Dia.	Ht.	For Hole Dia.	Certificate Type	Pkg. Qty.		Pkg.
Steel



		6-32	0	7/8"	7/16"	3/32"	3/16"	1/32"	13/64"	—	25	98001A110	00000


		6-32	2	5/8"	3/8"	3/32"	3/16"	1/32"	3/16"	—	25	92006A210	0000
		8-32	0	7/8"	7/16"	3/32"	13/64"	1/32"	7/32"	Material Certificate	25	98001A115	0000
		8-32	2	5/8"	3/8"	3/32"	13/64"	1/32"	13/64"	—	25	92006A220	0000
		10-24	0	7/8"	7/16"	3/32"	15/64"	1/32"	1/4"	—	25	98001A120	0000
		10-24	2	5/8"	3/8"	3/32"	15/64"	1/32"	15/64"	—	25	92006A140	0000
		10-32	0	7/8"	7/16"	3/32"	15/64"	1/32"	1/4"	Material Certificate	25	98001A125	0000
		10-32	2	5/8"	3/8"	3/32"	15/64"	1/32"	15/64"	—	25	92006A150	0000
		1/4"-20	0	1"	7/16"	3/32"	9/32"	1/32"	19/64"	Material Certificate	25	98001A130	0000
		1/4"-20	0	1 1/8"	1/2"	1/8"	19/64"	3/64"	5/16"	Material Certificate	25	98001A135	00000
		1/4"-20	2	13/16"	1/2"	1/8"	19/64"	1/16"	19/64"	—	25	92006A120	0000


		1/4"-28	2	13/16"	1/2"	1/8"	19/64"	1/16"	19/64"	—	10	92006A130	0000
		5/16"-18	0	1 1/2"	5/8"	9/64"	23/64"	5/64"	3/8"	—	10	98001A140	0000
		5/16"-18	2	63/64"	5/8"	9/64"	23/64"	3/32"	23/64"	—	25	92006A180	00000
		5/16"-24	2	63/64"	5/8"	9/64"	23/64"	3/32"	23/64"	—	10	92006A190	0000
		3/8"-16	0	1 1/2"	5/8"	9/64"	7/16"	3/32"	29/64"	—	10	98001A145	0000
		3/8"-16	2	63/64"	5/8"	9/64"	7/16"	3/32"	7/16"	—	25	92006A160	0000
		3/8"-24	2	63/64"	5/8"	9/64"	7/16"	3/32"	7/16"	—	10	92006A170	0000
		1/2"-13	0	1 1/2"	3/4"	3/16"	37/64"	3/32"	39/64"	Material Certificate	10	98001A156	00000
		1/2"-13	2	1 1/8"	3/4"	3/16"	37/64"	3/32"	19/32"	—	10	92006A110	00000
		M3.5 × 0.6 mm	0	22 mm	11 mm	2.4 mm	4.8 mm	0.8 mm	5.2 mm	—	10	98001A103	00000


		M3.5 × 0.6 mm	2	16 mm	9.6 mm	2.4 mm	4.8 mm	0.8 mm	4.8 mm	—	10	92006A240	0000
		M4 × 0.7 mm	0	22 mm	11 mm	2.4 mm	5.2 mm	0.8 mm	5.6 mm	—	10	98001A157	00000
		M4 × 0.7 mm	2	16 mm	9.6 mm	2.4 mm	5.2 mm	0.8 mm	5.2 mm	—	25	92006A250	0000
		M5 × 0.8 mm	0	22 mm	11 mm	2.4 mm	6 mm	0.8 mm	6.4 mm	—	10	98001A101	00000
		M5 × 0.8 mm	2	16 mm	9.6 mm	2.4 mm	6 mm	0.8 mm	6 mm	—	25	92006A260	0000
		M6 × 1 mm	0	28.5 mm	13 mm	3.2 mm	7.6 mm	1.2 mm	8 mm	—	10	98001A158	00000
		M6 × 1 mm	2	20.5 mm	13 mm	3.2 mm	7.6 mm	1.2 mm	7.6 mm	—	10	92006A270	0000
		M8 × 1.25 mm	0	38 mm	16 mm	3.6 mm	9.2 mm	2 mm	9.6 mm	—	10	98001A159	00000
		M8 × 1.25 mm	2	25 mm	16 mm	3.6 mm	9.2 mm	2 mm	9.2 mm	—	25	92006A280	00000
		M10 × 1.5 mm	0	38 mm	16 mm	3.6 mm	11.8 mm	2.4 mm	12.2 mm	—	10	98001A160	00000


		M12 × 1.75 mm	0	38 mm	19.4 mm	4.8 mm	14.1 mm	2.4 mm	14.7 mm	—	5	98001A102	00000
		M12 × 1.75 mm	2	28.5 mm	19 mm	4.8 mm	14 mm	2.4 mm	14 mm	—	10	92006A230	00000


		18-8 Stainless Steel



				8-32	0	7/8"	7/16"	3/32"	13/64"	1/32"	7/32"	—	10	92442A160	00000


				8-32	2	5/8"	3/8"	3/32"	13/64"	1/32"	7/32"	—	10	98697A510	0000
				10-24	0	7/8"	7/16"	3/32"	15/64"	1/32"	1/4"	—	10	92442A180	00000
				10-24	2	5/8"	3/8"	3/32"	15/64"	1/32"	1/4"	—	10	98697A520	0000
				10-32	0	7/8"	7/16"	3/32"	15/64"	1/32"	1/4"	—	10	92442A190	00000
				10-32	2	5/8"	3/8"	3/32"	15/64"	1/32"	1/4"	—	10	98697A530	0000
				1/4"-20	0	1"	7/16"	3/32"	19/64"	1/32"	5/16"	Material Certificate	5	92442A120	0000
				1/4"-20	0	1 1/8"	1/2"	1/8"	19/64"	3/64"	5/16"	Material Certificate	5	92442A150	0000
				1/4"-20	2	13/16"	1/2"	1/8"	19/64"	1/16"	5/16"	Material Certificate	10	98697A540	00000
				1/4"-28	2	13/16"	1/2"	1/8"	19/64"	1/16"	19/64"	Material Certificate	10	98697A770	00000
				5/16"-18	0	1 1/2"	5/8"	9/64"	23/64"	5/64"	3/8"	—	5	92442A140	00000


5/16"-18	2			63/64"	5/8"	9/64"	23/64"	3/32"	3/8"	—	5	98697A550	0000
5/16"-24	2			63/64"	5/8"	9/64"	23/64"	5/8"	23/64"	—	5	98697A780	0000
3/8"-16	0			1 1/2"	5/8"	9/64"	7/16"	3/32"	29/64"	—	5	92442A130	00000
3/8"-16	2			63/64"	5/8"	9/64"	7/16"	3/32"	29/64"	—	5	98697A560	0000
3/8"-24	2			63/64"	5/8"	9/64"	7/16"	3/32"	7/16"	—	5	98697A790	0000
1/2"-13	0			1 1/2"	51/64"	5/32"	19/32"	3/32"	39/64"	—	1	92442A220	0000
1/2"-13	2			1 1/8"	3/4"	5/32"	37/64"	3/32"	37/64"	—	5	98697A800	00000
M4 × 0.7 mm	2			16 mm	9.6 mm	2.4 mm	5.2 mm	0.8 mm	5.2 mm	—	10	98697A810	0000
M5 × 0.8 mm	0			22.4 mm	11.3 mm	2.5 mm	6.2 mm	0.8 mm	6.6 mm	—	10	92442A230	0000
M5 × 0.8 mm	2			16 mm	9.6 mm	2.4 mm	6 mm	0.8 mm	6 mm	—	10	98697A820	0000


M6 × 1 mm	0			28.5 mm	13 mm	3.2 mm	7.6 mm	1.2 mm	8 mm	—	5	92442A210	00000
M6 × 1 mm	2			20.5 mm	13 mm	3.2 mm	7.6 mm	1.2 mm	7.6 mm	Material Certificate	10	98697A830	00000
M8 × 1.25 mm	0			38 mm	16 mm	3.6 mm	9.2 mm	2 mm	9.6 mm	—	5	92442A170	00000
M8 × 1.25 mm	2			25 mm	16 mm	3.6 mm	9.2 mm	2 mm	9.2 mm	—	5	98697A840	0000
M10 × 1.5 mm	0			38 mm	16 mm	3.6 mm	11.8 mm	2.4 mm	12.2 mm	—	5	92442A110	00000

Offset-Barrel Low-Profile Rectangular Weld Nuts

Add permanent threads on corners and near edges. With a slim base and a short, offset barrel, these weld nuts fit in tight spaces such as channels and low-clearance areas.

Steel—Best for dry environments since moisture will cause them to rust. Made of uncoated steel, these nuts require minimal prep. Weld them to uncoated steel surfaces.

Zinc-Plated Steel—A step up from plain steel, these nuts withstand occasional exposure to moisture. Weld them to uncoated steel surfaces. If MIG or TIG welding, grind the zinc plating off the part of the nut you intend to weld.

18-8 Stainless Steel—Suitable for outdoor use, these nuts resist rust from water and mild chemicals. Weld them to stainless steel surfaces.

Number of Projections—More projections lead to more consistent welds by concentrating heat and protecting the threads from deforming.

			Base			Barrel
	Thread Size	No. of Projections	Lg.	Wd.	Thk.	Dia.	Ht.	For Hole Dia.	Certificate Type	Pkg. Qty.		Pkg.
Steel



		6-32	0	5/8"	7/16"	3/32"	3/16"	1/32"	13/64"	—	50	94579A100	000000


		6-32	1	5/8"	7/16"	3/32"	3/16"	1/32"	13/64"	—	25	93172A110	0000
		8-32	0	5/8"	7/16"	3/32"	13/64"	1/32"	7/32"	—	50	94579A200	00000
		8-32	1	5/8"	7/16"	3/32"	13/64"	1/32"	7/32"	—	25	93172A120	0000
		10-24	0	5/8"	7/16"	3/32"	15/64"	1/32"	1/4"	—	50	94579A250	00000
		10-24	1	5/8"	7/16"	3/32"	15/64"	1/32"	1/4"	—	25	93172A130	0000
		10-32	0	5/8"	7/16"	3/32"	15/64"	1/32"	1/4"	Material Certificate	50	94579A300	00000
		10-32	1	5/8"	7/16"	3/32"	15/64"	1/32"	1/4"	—	25	93172A140	0000
		1/4"-20	0	13/16"	1/2"	1/8"	19/64"	1/16"	5/16"	—	50	94579A400	00000
		1/4"-20	1	13/16"	1/2"	1/8"	19/64"	3/64"	5/16"	—	25	93172A150	0000
		1/4"-28	0	13/16"	1/2"	1/8"	19/64"	1/16"	5/16"	—	25	94579A450	0000


		5/16"-18	0	63/64"	5/8"	9/64"	23/64"	3/32"	3/8"	Material Certificate	25	94579A500	00000
		5/16"-18	1	63/64"	5/8"	9/64"	23/64"	5/64"	3/8"	—	25	93172A160	0000
		5/16"-24	0	63/64"	5/8"	9/64"	23/64"	3/32"	3/8"	Material Certificate	25	94579A550	0000
		3/8"-16	0	1 1/8"	5/8"	9/64"	7/16"	3/32"	29/64"	Material Certificate	25	94579A600	00000
		3/8"-16	1	1 1/8"	5/8"	9/64"	7/16"	3/32"	29/64"	—	10	93172A170	0000
		3/8"-24	0	1 1/8"	5/8"	9/64"	7/16"	3/32"	29/64"	—	25	94579A650	00000
		M3.5 × 0.6 mm	0	16 mm	11 mm	2.4 mm	4.8 mm	0.8 mm	4.9 mm	—	10	94579A660	0000
		M4 × 0.7 mm	0	16 mm	11 mm	2.4 mm	5.2 mm	0.8 mm	5.3 mm	—	10	94579A670	0000
		M4 × 0.7 mm	1	16 mm	11 mm	2.4 mm	5.2 mm	0.08 mm	5.6 mm	—	25	93172A180	00000
		M5 × 0.8 mm	0	16 mm	11 mm	2.4 mm	6 mm	0.8 mm	6.1 mm	—	10	94579A680	0000


		M5 × 0.8 mm	1	16 mm	11 mm	2.4 mm	6 mm	0.08 mm	6.4 mm	—	25	93172A190	00000
		M6 × 1 mm	0	20.5 mm	13 mm	3.2 mm	7.6 mm	1.2 mm	7.7 mm	—	10	94579A690	0000
		M6 × 1 mm	1	20.5 mm	13 mm	3.2 mm	7.6 mm	1.2 mm	8 mm	—	25	93172A210	00000
		M8 × 1.25 mm	0	25 mm	16 mm	3.6 mm	9.2 mm	2 mm	9.3 mm	—	10	94579A710	0000
		M8 × 1.25 mm	1	25 mm	16 mm	3.6 mm	9.2 mm	2 mm	9.6 mm	—	25	93172A220	00000
		M10 × 1.5 mm	0	28.5 mm	16 mm	3.6 mm	11.8 mm	2.4 mm	11.9 mm	—	10	94579A720	0000
		M10 × 1.5 mm	1	28.6 mm	16 mm	3.6 mm	11.8 mm	2.4 mm	12.2 mm	—	10	93172A230	0000


		Zinc-Plated Steel



				6-32	0	5/8"	7/16"	3/32"	3/16"	1/32"	13/64"	—	10	94579A730	0000


				8-32	0	5/8"	7/16"	3/32"	13/64"	1/32"	7/32"	—	10	94579A740	0000
				10-24	0	5/8"	7/16"	3/32"	15/64"	1/32"	1/4"	—	10	94579A750	0000
				10-32	0	5/8"	7/16"	3/32"	15/64"	1/32"	1/4"	—	10	94579A760	0000
				1/4"-20	0	13/16"	1/2"	1/8"	19/64"	1/16"	5/16"	—	10	94579A770	0000
				1/4"-28	0	13/16"	1/2"	1/8"	19/64"	1/16"	5/16"	—	10	94579A780	0000
				5/16"-18	0	63/64"	5/8"	9/64"	23/64"	3/32"	3/8"	—	10	94579A790	0000
				5/16"-24	0	63/64"	5/8"	9/64"	23/64"	3/32"	3/8"	—	10	94579A810	0000
				3/8"-16	0	1 1/8"	5/8"	9/64"	7/16"	3/32"	29/64"	—	10	94579A820	0000
				3/8"-24	0	1 1/8"	5/8"	9/64"	7/16"	3/32"	29/64"	—	10	94579A830	0000
				M3.5 × 0.6 mm	0	16 mm	11 mm	2.4 mm	4.8 mm	0.8 mm	4.9 mm	—	10	94579A840	0000


				M4 × 0.7 mm	0	16 mm	11 mm	2.4 mm	5.2 mm	0.8 mm	5.3 mm	—	10	94579A850	0000
				M5 × 0.8 mm	0	16 mm	11 mm	2.4 mm	6 mm	0.8 mm	6.1 mm	—	10	94579A860	0000
				M6 × 1 mm	0	20.5 mm	13 mm	3.2 mm	7.6 mm	1.2 mm	7.7 mm	—	10	94579A870	0000
				M8 × 1.25 mm	0	25 mm	16 mm	3.6 mm	9.2 mm	2 mm	9.3 mm	—	10	94579A880	0000
				M10 × 1.5 mm	0	28.5 mm	16 mm	3.6 mm	11.8 mm	2.4 mm	11.9 mm	—	10	94579A890	00000


18-8 Stainless Steel



				8-32	0	5/8"	3/8"	3/32"	13/64"	1/32"	7/32"	—	10	94581A117	00000


				8-32	1	5/8"	3/8"	3/32"	13/64"	1/32"	7/32"	—	10	92413A110	0000
				10-24	0	5/8"	3/8"	3/32"	15/64"	1/32"	1/4"	—	10	94581A123	00000
				10-24	1	5/8"	3/8"	3/32"	15/64"	1/32"	1/4"	Material Certificate	10	92413A120	0000
				10-32	0	5/8"	3/8"	3/32"	15/64"	1/32"	1/4"	Material Certificate	10	94581A128	00000
				10-32	1	5/8"	3/8"	3/32"	15/64"	1/32"	1/4"	Material Certificate	10	92413A150	0000
				1/4"-20	0	13/16"	1/2"	1/8"	19/64"	1/16"	5/16"	Material Certificate	10	94581A132	00000
				1/4"-20	1	13/16"	1/2"	1/8"	19/64"	3/64"	5/16"	Material Certificate	5	92413A130	0000
				1/4"-28	0	13/16"	1/2"	1/8"	19/64"	1/16"	5/16"	—	10	94581A136	00000
				5/16"-18	0	1 1/8"	5/8"	9/64"	23/64"	3/32"	3/8"	Material Certificate	5	94581A139	00000
				5/16"-18	1	1 1/8"	5/8"	9/64"	23/64"	5/64"	3/8"	—	5	92413A140	00000


				5/16"-24	0	1 1/8"	5/8"	9/64"	23/64"	3/32"	3/8"	—	5	94581A144	0000
				3/8"-16	0	1 1/8"	5/8"	9/64"	7/16"	3/32"	29/64"	Material Certificate	5	94581A148	00000
				3/8"-16	1	1 1/8"	5/8"	9/64"	7/16"	3/32"	29/64"	—	5	92413A160	00000
				3/8"-24	0	1 1/8"	5/8"	9/64"	7/16"	3/32"	29/64"	—	5	94581A151	00000
				M4 × 0.7 mm	0	15.9 mm	9.6 mm	2.4 mm	5.2 mm	0.8 mm	5.6 mm	—	10	94581A161	00000
				M4 × 0.7 mm	1	15.9 mm	9.6 mm	2.4 mm	5.2 mm	0.8 mm	5.6 mm	Material Certificate	5	92413A190	0000
				M5 × 0.8 mm	0	15.9 mm	9.6 mm	2.4 mm	6 mm	0.8 mm	6.4 mm	—	10	94581A162	00000
				M5 × 0.8 mm	1	15.9 mm	9.6 mm	2.4 mm	6 mm	0.8 mm	6.4 mm	Material Certificate	5	92413A210	0000
				M6 × 1 mm	0	20.6 mm	12.9 mm	3.2 mm	7.6 mm	1.3 mm	8 mm	—	10	94581A164	00000
				M6 × 1 mm	1	20.6 mm	12.9 mm	3.2 mm	7.6 mm	1.3 mm	8 mm	Material Certificate	5	92413A170	0000


				M8 × 1.25 mm	0	28.6 mm	16.15 mm	3.6 mm	9.2 mm	2 mm	9.6 mm	—	5	94581A171	00000
				M8 × 1.25 mm	1	28.6 mm	16.1 mm	3.6 mm	9.2 mm	2 mm	9.6 mm	—	5	92413A180	00000

Rectangular Weld Nuts

These nuts add permanent threads in narrow spaces such as channels. With a slim footprint, they fit where round weld nuts can’t. Plus, their barrel is twice as long as low-profile barrels, so more threads connect with your bolt for a secure hold. You can weld these nuts in two orientations: on top of a flat surface or with the barrel sticking through a hole.

Steel—Best for dry environments since moisture will cause them to rust. Made of uncoated steel, these nuts require minimal prep. Weld them to uncoated steel surfaces.

18-8 Stainless Steel—Suitable for outdoor use, these nuts resist rust from water and mild chemicals. Weld them to stainless steel surfaces.

Number of Projections—Weld these nuts on top of metal—the projections on the bottom will fuse to the surface. More projections lead to more consistent welds by concentrating heat and protecting the threads from deforming.

			Base			Barrel
	Thread Size	No. of Projections	Lg.	Wd.	Thk.	Dia.	Ht.	For Hole Dia.	Certificate Type	Pkg. Qty.		Pkg.
Steel



		6-32	0	9/16"	19/64"	1/32"	5/32"	1/4"	—	—	50	90594A308	000000


		6-32	4	1/2"	5/16"	5/64"	7/32"	5/16"	7/32"	—	5	92044A150	0000
		8-32	0	23/32"	7/16"	1/32"	7/32"	1/4"	—	—	50	90594A009	00000
		8-32	4	1/2"	5/16"	5/64"	1/4"	5/16"	1/4"	—	5	92044A180	0000
		10-24	0	45/64"	1/2"	1/32"	1/4"	7/16"	—	—	50	90594A013	00000
		10-24	0	3/4"	1/2"	1/32"	1/4"	9/32"	—	—	50	90594A011	00000
		10-24	4	5/8"	3/8"	3/32"	9/32"	3/8"	9/32"	—	5	92044A160	0000
		10-32	0	45/64"	1/2"	1/32"	1/4"	7/16"	—	—	50	90594A023	00000
		10-32	0	3/4"	1/2"	1/32"	1/4"	9/32"	—	—	50	90594A309	00000
		10-32	4	5/8"	3/8"	3/32"	9/32"	3/8"	9/32"	—	5	92044A170	0000
		1/4"-20	0	3/4"	1/2"	3/64"	5/16"	1/4"	—	—	50	90594A024	00000


		1/4"-20	0	3/4"	1/2"	3/64"	5/16"	5/16"	—	—	100	90594A025	00000
		1/4"-20	0	3/4"	1/2"	3/64"	5/16"	7/16"	—	—	50	90594A029	00000
		1/4"-20	0	3/4"	1/2"	3/64"	5/16"	9/16"	—	—	50	90594A027	00000
		1/4"-20	0	3/4"	1/2"	3/64"	5/16"	7/8"	—	—	25	90594A028	00000
		1/4"-20	2	3/4"	1/2"	3/64"	5/16"	1/4"	5/16"	—	25	92044A110	0000
		1/4"-20	2	3/4"	1/2"	3/64"	5/16"	5/16"	5/16"	—	25	92044A120	00000
		1/4"-28	0	3/4"	1/2"	3/64"	5/16"	21/64"	—	—	50	90594A040	00000
		5/16"-18	0	7/8"	9/16"	1/16"	3/8"	3/8"	—	—	50	90594A030	00000
		5/16"-18	0	7/8"	9/16"	1/16"	3/8"	5/8"	—	—	25	90594A430	00000
		5/16"-18	0	7/8"	9/16"	1/16"	3/8"	7/8"	—	—	10	90594A440	0000


		3/8"-16	0	1"	5/8"	5/64"	29/64"	7/16"	—	—	50	90594A031	00000
		3/8"-16	2	1"	5/8"	1/16"	29/64"	7/16"	29/64"	—	25	92044A130	00000
		1/2"-13	0	1 1/4"	3/4"	3/32"	19/32"	3/8"	—	—	25	90594A033	00000
		5/8"-11	0	1 7/16"	7/8"	3/32"	23/32"	3/8"	—	—	10	90594A420	00000
		M5 × 0.8 mm	0	19.1 mm	12.7 mm	1 mm	6.2 mm	7.9 mm	—	—	50	90594A801	00000
		M6 × 1 mm	0	19.1 mm	12.7 mm	1.2 mm	7.7 mm	7.9 mm	—	—	50	90594A330	00000
		M6 × 1 mm	0	19.1 mm	12.7 mm	1.2 mm	7.7 mm	11.1 mm	—	—	50	90594A350	00000
		M6 × 1 mm	0	19.1 mm	12.7 mm	1.2 mm	7.7 mm	14.3 mm	—	—	50	90594A370	00000
		M8 × 1.25 mm	0	22.2 mm	14.3 mm	1.4 mm	9.5 mm	9.5 mm	—	—	25	90594A201	00000
		M8 × 1.25 mm	0	22.2 mm	14.3 mm	1.4 mm	9.5 mm	15.9 mm	—	—	25	90594A202	00000


		M10 × 1.5 mm	0	25.4 mm	15.9 mm	1.6 mm	11.5 mm	11.1 mm	—	—	25	90594A203	00000


		Zinc-Plated Steel



				6-32	0	9/16"	19/64"	1/32"	5/32"	1/4"	—	—	50	90594A410	00000


				8-32	0	23/32"	7/16"	1/32"	7/32"	1/4"	—	—	50	90594A111	00000
				10-24	0	45/64"	1/2"	3/64"	1/4"	7/16"	—	—	50	90594A112	00000
				10-24	0	3/4"	1/2"	3/64"	1/4"	9/32"	—	—	50	90594A113	00000
				10-32	0	45/64"	1/2"	3/64"	1/4"	7/16"	—	—	50	90594A114	00000
				10-32	0	3/4"	1/2"	3/64"	1/4"	9/32"	—	—	50	90594A115	00000
				1/4"-20	0	3/4"	1/2"	3/64"	5/16"	1/4"	—	—	50	90594A301	00000
				1/4"-20	0	3/4"	1/2"	3/64"	5/16"	5/16"	—	—	50	90594A302	00000
				1/4"-20	0	3/4"	1/2"	3/64"	5/16"	7/16"	—	—	50	90594A303	00000
				1/4"-20	0	3/4"	1/2"	3/64"	5/16"	9/16"	—	—	50	90594A304	00000
				1/4"-20	2	3/4"	1/2"	3/64"	5/16"	1/4"	5/16"	—	10	92044A140	00000


5/16"-18				0	7/8"	9/16"	1/16"	3/8"	3/8"	—	—	25	90594A305	0000
3/8"-16	0			1"	5/8"	1/16"	7/16"	7/16"	—	—	25	90594A306	00000
1/2"-13	0			1 1/4"	3/4"	3/32"	19/32"	3/8"	—	—	10	90594A307	00000
M5 × 0.8 mm	0			19.1 mm	12.7 mm	1 mm	6.2 mm	7.9 mm	—	—	50	90594A320	00000
M6 × 1 mm	0			19.1 mm	12.7 mm	1.2 mm	7.7 mm	7.9 mm	—	—	50	90594A802	00000
M8 × 1.25 mm	0			22.2 mm	14.3 mm	1.4 mm	9.5 mm	9.5 mm	—	—	25	90594A803	00000
M10 × 1.5 mm	0			25.4 mm	15.9 mm	1.6 mm	11.5 mm	11.1 mm	—	—	25	90594A804	00000


18-8 Stainless Steel



				4-40	0	9/16"	9/32"	1/32"	9/64"	1/8"	—	Material Certificate	25	90572A102	00000


				6-32	0	9/16"	9/32"	1/32"	11/64"	1/4"	—	Material Certificate	25	90572A103	00000
				6-32	4	1/2"	5/16"	5/64"	7/32"	5/16"	—	—	1	92267A140	0000
				8-32	0	7/16"	5/16"	1/32"	13/64"	1/8"	—	—	5	90572A101	0000
				8-32	0	3/4"	1/2"	3/64"	7/32"	1/4"	—	Material Certificate	10	90572A100	0000
				8-32	4	1/2"	5/16"	5/64"	1/4"	5/16"	—	Material Certificate	5	92267A120	00000
				10-24	0	3/4"	1/2"	3/64"	15/64"	9/32"	—	—	10	90572A200	00000
				10-24	4	5/8"	3/8"	3/32"	9/32"	3/8"	—	—	5	92267A150	00000
				10-32	0	3/4"	1/2"	3/64"	15/64"	9/32"	—	—	10	90572A300	00000
				10-32	4	5/8"	3/8"	3/32"	9/32"	3/8"	—	Material Certificate	5	92267A130	00000
				1/4"-20	0	3/4"	1/2"	1/16"	5/16"	5/16"	—	Material Certificate	10	90572A400	00000


				1/4"-20	0	3/4"	1/2"	1/16"	5/16"	7/16"	—	—	10	90572A700	00000
				1/4"-20	4	13/16"	1/2"	7/64"	3/8"	1/2"	—	—	1	92267A110	0000
				5/16"-18	0	7/8"	9/16"	1/16"	25/64"	3/8"	—	Material Certificate	5	90572A500	00000
				3/8"-16	0	1"	21/32"	5/64"	15/32"	7/16"	—	—	5	90572A600	00000
				M5 × 0.8 mm	0	19.1 mm	12.7 mm	1 mm	6.8 mm	7.1 mm	—	—	1	90572A210	0000
				M6 × 1 mm	0	19.1 mm	12.7 mm	1.3 mm	7.7 mm	7.9 mm	—	—	1	90572A310	0000
				M8 × 1.25 mm	0	22 mm	14.3 mm	1.5 mm	9.9 mm	9.5 mm	—	Material Certificate	25	90572A410	00000
				M10 × 1.5 mm	0	25.4 mm	16.7 mm	1.9 mm	12.3 mm	11.1 mm	—	—	1	90572A510	00000

Long-Barrel Round Weld Nuts

With an extended barrel and a round flange, these nuts distribute force evenly to prevent pull-through. The barrel is twice as long as standard round weld nuts, so more threads connect with your bolt for a great grip. You can weld these nuts in two orientations: on top of a flat surface or with the barrel sticking through the hole.

Steel—Best for dry environments since moisture will cause them to rust. Made of uncoated steel, these nuts require minimal prep. Weld them to uncoated steel surfaces.

18-8 Stainless Steel—Suitable for outdoor use, these nuts resist rust from water and mild chemicals. Weld them to stainless steel surfaces.

			Base		Barrel
	Thread Size	No. of Projections	Dia.	Thk.	Dia.	Ht.	Certificate Type	Pkg. Qty.		Pkg.
Steel



		4-40	0	3/8"	1/32"	9/64"	1/8"	—	100	90596A005	000000


		6-32	0	9/16"	1/32"	5/32"	1/4"	—	100	90596A020	00000
		8-32	0	1/2"	1/32"	7/32"	1/4"	—	50	90596A310	0000
		8-32	0	23/32"	1/32"	13/64"	1/4"	—	100	90596A040	00000
		8-32	3	23/32"	1/32"	7/32"	1/4"	—	50	90607A100	00000
		10-24	0	45/64"	1/32"	1/4"	7/16"	—	25	90596A050	0000
		10-24	0	3/4"	1/32"	1/4"	9/32"	—	100	90596A060	00000
		10-24	3	3/4"	3/64"	1/4"	9/32"	—	50	90607A200	00000
		10-32	0	45/64"	1/32"	1/4"	5/16"	—	25	90596A070	0000
		10-32	0	45/64"	1/32"	1/4"	7/16"	—	100	90596A080	00000
		10-32	0	3/4"	1/32"	1/4"	9/32"	—	100	90596A090	00000


		10-32	3	3/4"	3/64"	1/4"	9/32"	—	50	90607A230	00000
		1/4"-20	0	3/4"	3/64"	5/16"	1/4"	—	50	90596A240	0000
		1/4"-20	0	3/4"	3/64"	5/16"	5/16"	—	100	90596A025	00000
		1/4"-20	0	3/4"	3/64"	5/16"	7/16"	—	100	90596A029	00000
		1/4"-20	0	3/4"	3/64"	5/16"	9/16"	—	100	90596A300	00000
		1/4"-20	0	3/4"	3/64"	5/16"	7/8"	—	25	90596A270	00000
		1/4"-20	0	1 1/4"	3/64"	5/16"	5/16"	—	50	90596A250	00000
		1/4"-20	0	1 1/4"	3/64"	5/16"	9/16"	—	25	90596A260	00000
		1/4"-20	3	3/4"	3/64"	5/16"	5/16"	—	50	90607A300	00000
		1/4"-20	3	3/4"	3/64"	5/16"	7/16"	—	25	90607A310	00000


		1/4"-20	3	3/4"	3/64"	5/16"	9/16"	—	50	90607A320	00000
		1/4"-20	3	3/4"	3/64"	5/16"	7/8"	—	25	90607A330	00000
		5/16"-18	0	7/8"	1/16"	3/8"	3/8"	—	100	90596A030	00000
		5/16"-18	0	7/8"	1/16"	3/8"	5/8"	—	50	90596A032	00000
		5/16"-18	0	7/8"	1/16"	3/8"	7/8"	—	25	90596A400	00000
		5/16"-18	3	7/8"	1/16"	3/8"	3/8"	—	25	90607A350	00000
		5/16"-18	3	7/8"	1/16"	3/8"	5/8"	—	25	90607A400	00000
		5/16"-18	3	7/8"	1/16"	3/8"	7/8"	—	25	90607A410	00000
		3/8"-16	0	1"	1/16"	7/16"	7/16"	—	50	90596A031	00000
		3/8"-16	0	1"	1/16"	7/16"	5/8"	—	10	90596A280	0000


		3/8"-16	3	1"	1/16"	29/64"	7/16"	—	25	90607A420	00000
		1/2"-13	0	1 1/4"	3/32"	19/32"	3/8"	—	10	90596A033	00000
		1/2"-13	3	1 1/4"	3/32"	19/32"	3/8"	—	10	90607A450	00000
		5/8"-11	0	1 7/16"	3/32"	23/32"	3/8"	—	10	90596A039	00000
		M4 × 0.7 mm	0	18 mm	0.8 mm	5.3 mm	6.3 mm	—	50	90563A116	00000
		M5 × 0.8 mm	0	19.1 mm	1 mm	6.2 mm	7.9 mm	—	50	90563A117	00000
		M6 × 1 mm	0	19.1 mm	1.2 mm	7.7 mm	7.9 mm	—	100	90563A620	00000
		M6 × 1 mm	0	19.1 mm	1.2 mm	7.7 mm	11.1 mm	—	100	90563A630	00000
		M6 × 1 mm	0	19.1 mm	1.2 mm	7.7 mm	14.3 mm	—	100	90563A640	00000
		M8 × 1.25 mm	0	22.2 mm	1.4 mm	9.4 mm	9.5 mm	—	50	90563A650	00000


		M8 × 1.25 mm	0	22.2 mm	1.4 mm	9.4 mm	15.9 mm	—	50	90563A660	00000
		M10 × 1.5 mm	0	25.4 mm	1.6 mm	11.5 mm	11.1 mm	—	50	90563A670	00000


		Zinc-Plated Steel



				4-40	0	3/8"	1/32"	9/64"	1/8"	—	100	90596A111	00000


6-32	0			9/16"	1/32"	5/32"	1/4"	—	100	90596A112	00000
8-32	0			1/2"	1/32"	7/32"	1/4"	—	50	90596A210	00000
8-32	0			23/32"	1/32"	13/64"	1/4"	—	100	90596A113	00000
10-24	0			45/64"	1/32"	1/4"	7/16"	—	25	90596A220	0000
10-24	0			3/4"	1/32"	1/4"	9/32"	—	100	90596A114	00000
10-32	0			45/64"	1/32"	1/4"	5/16"	—	25	90596A230	0000
10-32	0			45/64"	1/32"	1/4"	7/16"	—	100	90596A115	00000
10-32	0			3/4"	1/32"	1/4"	9/32"	—	100	90596A116	00000
1/4"-20	0			3/4"	3/64"	5/16"	1/4"	—	50	90596A110	0000
1/4"-20	0			3/4"	3/64"	5/16"	5/16"	—	100	90596A120	00000


1/4"-20	0			3/4"	3/64"	5/16"	7/16"	—	100	90596A130	00000
1/4"-20	0			3/4"	3/64"	5/16"	9/16"	—	100	90596A140	00000
5/16"-18	0			7/8"	1/16"	3/8"	3/8"	—	50	90596A150	00000
5/16"-18	0			7/8"	1/16"	3/8"	5/8"	—	50	90596A160	00000
5/16"-18	0			7/8"	1/16"	3/8"	7/8"	—	25	90596A170	00000
3/8"-16	0			1"	1/16"	7/16"	7/16"	—	50	90596A190	00000
3/8"-16	0			1"	1/16"	7/16"	5/8"	—	10	90596A180	0000
1/2"-13	0			1 1/4"	3/32"	19/32"	3/8"	—	10	90596A320	00000
5/8"-11	0			1 7/16"	3/32"	23/32"	3/8"	—	10	90596A330	00000
M4 × 0.7 mm	0			18 mm	0.8 mm	5.3 mm	6.3 mm	—	50	90563A590	00000


M5 × 0.8 mm	0			19.1 mm	1 mm	6.2 mm	7.9 mm	—	50	90563A680	00000
M6 × 1 mm	0			19.1 mm	1.2 mm	7.7 mm	7.9 mm	—	50	90563A111	00000
M6 × 1 mm	0			19.1 mm	1.2 mm	7.7 mm	11.1 mm	—	50	90563A112	00000
M8 × 1.25 mm	0			22.2 mm	1.4 mm	9.4 mm	9.5 mm	—	50	90563A114	00000
M8 × 1.25 mm	0			22.2 mm	1.4 mm	9.4 mm	15.9 mm	—	50	90563A115	00000
M10 × 1.5 mm	0			25.4 mm	1.6 mm	11.5 mm	11.1 mm	—	25	90563A113	00000


18-8 Stainless Steel



				4-40	0	3/8"	1/32"	1/8"	1/8"	Material Certificate	25	90860A101	00000


				6-32	0	1/2"	1/32"	11/64"	1/4"	Material Certificate	25	90860A102	00000
				8-32	0	1/2"	3/64"	7/32"	1/4"	—	10	90860A100	00000
				10-24	0	3/4"	3/64"	15/64"	9/32"	—	10	90860A105	00000
				10-32	0	3/4"	3/64"	15/64"	9/32"	—	10	90860A107	00000
				1/4"-20	0	3/4"	1/16"	5/16"	5/16"	Material Certificate	10	90860A110	00000
				1/4"-20	0	3/4"	1/16"	5/16"	3/8"	Material Certificate	10	90860A111	00000
				1/4"-20	0	3/4"	1/16"	5/16"	7/16"	—	10	90860A112	00000
				1/4"-20	0	3/4"	1/16"	5/16"	1/2"	Material Certificate	5	90860A113	0000
				5/16"-18	0	7/8"	1/16"	25/64"	3/8"	Material Certificate	5	90860A114	00000
				5/16"-18	0	7/8"	1/16"	25/64"	1/2"	—	5	90860A115	00000


				3/8"-16	0	1"	5/64"	15/32"	7/16"	—	5	90860A120	00000
				M6 × 1 mm	0	19 mm	1.3 mm	7.6 mm	11.1 mm	—	5	90860A103	00000

Square Weld Nuts

With four symmetrical projections, these nuts create the strongest hold in our offering. Unlike rectangular weld nuts, each projection is equidistant from the threads, so welds wrap evenly for extra strength and twist resistance. Projections concentrate heat away from the threads to prevent them from deforming and create consistent welds. All nuts have a collar pilot that guides them into the hole, holds them in place while welding, and protects the threads from weld spatter.

Steel—Best for dry environments since moisture will cause them to rust. Made of uncoated steel, these nuts require minimal prep. Weld them to uncoated steel surfaces.

				Collar
	Thread Size	Wd.	Ht.	Dia.	Ht.	For Hole Dia.	Specs. Met	Certificate Type	Pkg. Qty.		Pkg.
Steel



		6-32	7/16"	1/8"	3/16"	0.046"	13/64"	ASME B1.1	—	25	93975A610	000000


		8-32	7/16"	3/32"	13/64"	0.03"	7/32"	ASME B1.1	—	25	93975A620	00000
		10-24	7/16"	9/64"	15/64"	0.046"	1/4"	ASME B1.1	—	25	93975A630	00000
		10-32	7/16"	9/64"	15/64"	0.046"	1/4"	ASME B1.1	Material Certificate	25	93975A640	00000
		1/4"-20	1/2"	5/32"	13/32"	0.063"	27/64"	ASME B1.1	Material Certificate	50	93975A100	00000
		1/4"-20	1/2"	5/32"	13/32"	0.094"	27/64"	ASME B1.1	—	25	93975A113	00000
		1/4"-28	1/2"	5/32"	13/32"	0.063"	27/64"	ASME B1.1	—	50	93975A120	00000
		5/16"-18	9/16"	3/16"	15/32"	0.063"	31/64"	ASME B1.1	Material Certificate	50	93975A200	00000
		5/16"-18	9/16"	3/16"	15/32"	0.094"	31/64"	ASME B1.1	Material Certificate	25	93975A114	00000
		5/16"-24	9/16"	3/16"	15/32"	0.063"	31/64"	ASME B1.1	—	50	93975A220	00000
		5/16"-24	9/16"	3/16"	15/32"	0.094"	31/64"	ASME B1.1	—	25	93975A117	00000


		3/8"-16	5/8"	1/4"	17/32"	0.063"	35/64"	ASME B1.1	Material Certificate	25	93975A300	00000
		3/8"-16	5/8"	1/4"	17/32"	0.094"	35/64"	ASME B1.1	—	10	93975A112	0000
		3/8"-24	5/8"	1/4"	17/32"	0.063"	35/64"	ASME B1.1	—	50	93975A320	00000
		3/8"-24	5/8"	1/4"	17/32"	0.094"	35/64"	ASME B1.1	—	25	93975A118	00000
		7/16"-14	3/4"	5/16"	21/32"	0.063"	43/64"	ASME B1.1	—	25	93975A350	00000
		7/16"-14	3/4"	5/16"	21/32"	0.094"	43/64"	ASME B1.1	—	10	93975A119	0000
		7/16"-20	3/4"	5/16"	21/32"	0.063"	43/64"	ASME B1.1	—	25	93975A360	00000
		7/16"-20	3/4"	5/16"	21/32"	0.094"	43/64"	ASME B1.1	—	10	93975A115	00000
		1/2"-13	13/16"	3/8"	23/32"	0.063"	47/64"	ASME B1.1	Material Certificate	25	93975A400	00000
		1/2"-13	13/16"	3/8"	23/32"	0.094"	47/64"	ASME B1.1	Material Certificate	10	93975A111	00000


		1/2"-20	13/16"	3/8"	23/32"	0.063"	47/64"	ASME B1.1	Material Certificate	25	93975A420	00000
		1/2"-20	13/16"	3/8"	23/32"	0.094"	47/64"	ASME B1.1	—	10	93975A116	00000
		5/8"-11	7/8"	7/16"	25/32"	0.094"	51/64"	ASME B1.1	Material Certificate	25	93975A450	00000
		M4 × 0.7 mm	7 mm	3.5 mm	—	—	4.3 mm	DIN 928	—	50	93975A710	00000
		M5 × 0.8 mm	9 mm	4.2 mm	—	—	5.3 mm	DIN 928	—	100	93975A720	00000
		M6 × 1 mm	10 mm	5 mm	—	—	6.4 mm	DIN 928	—	100	93975A730	00000
		M8 × 1.25 mm	14 mm	6.5 mm	—	—	8.4 mm	DIN 928	Material Certificate	100	93975A740	00000
		M10 × 1.5 mm	17 mm	8 mm	—	—	10.5 mm	DIN 928	—	25	93975A750	0000
		M12 × 1.75 mm	19 mm	9.5 mm	—	—	13 mm	DIN 928	—	25	93975A760	00000
		M14 × 2 mm	22 mm	11 mm	—	—	16.8 mm	DIN 928	—	5	93975A121	00000


		M16 × 2 mm	24 mm	13 mm	—	—	18.8 mm	DIN 928	—	5	93975A122	00000

Self-Aligning Rectangular Weld Nuts

Help screws pass through perfectly every time. These nuts float inside a rectangular retainer that shifts and tilts to compensate for misalignment. A pilot tip locates the hole, and the retainer holds the nut in place during welding.

Steel with Steel Retainer—Best for dry environments since moisture will create rust. Weld them to steel surfaces.

Zinc-Plated Steel with Steel Retainer—A step up from a plain steel nut, the zinc plating on these nuts withstands occasional exposure to moisture. Weld them to uncoated steel surfaces.

Zinc-Plated Steel with Aluminum Retainer—Both the nut and retainer can withstand occasional exposure to moisture. Weld them to aluminum surfaces.

18-8 Stainless Steel with Stainless Steel Retainer—Suitable for outdoor use, both the nut and its retainer resist rust from water and mild chemicals. Weld them to stainless steel surfaces.

		Base
	Thread Size	Lg.	Wd.	Thk.	Ht.	Certificate Type	Pkg. Qty.		Pkg.
Steel with Steel Retainer



		6-32	1 1/2"	1/2"	3/64"	29/64"	—	1	90955A136	00000


		8-32	1 1/2"	1/2"	3/64"	11/32"	—	10	90955A105	00000
		10-24	1 1/2"	1/2"	3/64"	11/32"	—	10	90955A107	00000
		10-32	1 1/2"	1/2"	3/64"	11/32"	—	10	90955A109	00000
		1/4"-20	1 3/4"	9/16"	1/16"	7/16"	—	10	90955A112	00000
		1/4"-28	1 3/4"	9/16"	1/16"	7/16"	—	10	90955A113	00000
		5/16"-18	2"	25/32"	1/16"	33/64"	—	10	90955A115	00000
		5/16"-24	2"	25/32"	1/16"	33/64"	—	10	90955A116	00000
		3/8"-16	2"	25/32"	1/16"	33/64"	—	10	90955A123	00000
		3/8"-24	2"	25/32"	1/16"	33/64"	—	5	90955A120	00000
		7/16"-14	2 1/4"	15/16"	1/16"	51/64"	—	5	90955A134	00000


		1/2"-13	2 1/4"	15/16"	1/16"	51/64"	—	5	90955A121	00000
		M5 × 0.8 mm	38.1 mm	12.7 mm	1.06 mm	8.6 mm	—	5	90955A311	00000
		M6 × 1 mm	38.1 mm	12.7 mm	1.06 mm	8.6 mm	—	10	90955A101	00000
		M8 × 1.25 mm	50.8 mm	19.8 mm	1.27 mm	13.7 mm	—	5	90955A103	00000
		M10 × 1.5 mm	50.8 mm	19.8 mm	1.27 mm	13 mm	—	5	90955A312	00000
		M12 × 1.75 mm	58.7 mm	23.8 mm	1.27 mm	20.2 mm	—	5	90955A313	00000


		Zinc-Plated Steel with Steel Retainer



				10-24	1 1/2"	1/2"	3/64"	11/32"	—	5	90955A131	0000


				1/4"-20	1 3/4"	9/16"	1/16"	7/16"	—	5	90955A132	00000
				5/16"-18	2"	25/32"	1/16"	33/64"	—	5	90955A133	00000


				Zinc-Plated Steel with Aluminum Retainer



						10-32	1 1/2"	1/2"	3/64"	11/32"	—	10	90955A130	00000


						1/4"-20	1 3/4"	9/16"	1/16"	7/16"	—	10	90955A126	00000
						5/16"-18	2"	25/32"	1/16"	33/64"	—	10	90955A128	00000
						3/8"-16	2"	25/32"	1/16"	33/64"	—	5	90955A129	00000
						M10 × 1.5 mm	50.8 mm	19.8 mm	1.27 mm	13 mm	—	5	90955A314	00000


						18-8 Stainless Steel with Stainless Steel Retainer



								1/4"-20	1 3/4"	9/16"	1/16"	11/32"	Material Certificate	1	90955A135	00000

Weld Nuts

Add permanent threads to thin metal with our go-to weld nuts. Unlike press-fit and rivet nuts, these nuts fuse to the base metal, so they won’t twist and pull out. Three evenly spaced projections concentrate heat away from the threads to prevent them from deforming and create consistent welds. All have a collar pilot that guides the nut into the hole, holds it in place while welding, and protects the threads from weld spatter. You can also install them on thick pieces of metal.

Steel—Best for dry environments since moisture will cause them to rust. Made of uncoated steel, these nuts require minimal prep. Weld them to uncoated steel surfaces.

18-8 Stainless Steel—Suitable for outdoor use, these nuts resist rust from water and mild chemicals. Weld them to stainless steel surfaces.

Grade 2 Titanium—The best choice when you need a high strength-to-weight ratio, these nuts are 40% lighter than steel nuts. They’re also our most corrosion-resistant weld nuts, standing up to salt water, strong acids, and other harsh chemicals. Weld them to titanium surfaces.

				Collar
	Thread Size	Wd.	Ht.	Dia.	Ht.	For Hole Dia.	Specs. Met	Certificate Type	Pkg. Qty.		Pkg.
Steel



		8-32	1/2"	3/16"	13/32"	0.04"	27/64"	ASME B1.1	—	10	93560A190	00000


		10-24	1/2"	3/16"	13/32"	0.04"	27/64"	ASME B1.1	—	25	93560A210	00000
		10-32	1/2"	3/16"	13/32"	0.04"	27/64"	ASME B1.1	Material Certificate	25	93560A220	00000
		1/4"-20	1/2"	3/16"	13/32"	0.04"	27/64"	ASME B1.1	Material Certificate	50	93560A140	00000
		1/4"-20	1/2"	3/16"	13/32"	0.085"	27/64"	ASME B1.1	—	25	93560A116	00000
		1/4"-28	1/2"	3/16"	13/32"	0.04"	27/64"	ASME B1.1	—	25	93560A230	00000
		5/16"-18	9/16"	7/32"	15/32"	0.04"	31/64"	ASME B1.1	Material Certificate	50	93560A150	00000
		5/16"-18	9/16"	7/32"	15/32"	0.085"	31/64"	ASME B1.1	—	25	93560A113	00000
		5/16"-24	9/16"	7/32"	15/32"	0.085"	31/64"	ASME B1.1	—	25	93560A240	00000
		3/8"-16	5/8"	1/4"	17/32"	0.05"	35/64"	ASME B1.1	Material Certificate	50	93560A160	00000
		3/8"-16	5/8"	1/4"	17/32"	0.085"	35/64"	ASME B1.1	—	25	93560A112	00000


		3/8"-24	5/8"	1/4"	17/32"	0.05"	35/64"	ASME B1.1	Material Certificate	25	93560A250	00000
		7/16"-14	3/4"	21/64"	21/32"	0.05"	43/64"	ASME B1.1	—	25	93560A260	00000
		7/16"-14	3/4"	21/64"	21/32"	0.085"	43/64"	ASME B1.1	—	10	93560A114	00000
		7/16"-20	3/4"	21/64"	21/32"	0.05"	43/64"	ASME B1.1	—	25	93560A270	00000
		7/16"-20	3/4"	21/64"	21/32"	0.085"	43/64"	ASME B1.1	—	10	93560A115	00000
		1/2"-13	13/16"	3/8"	23/32"	0.06"	47/64"	ASME B1.1	Material Certificate	25	93560A180	00000
		5/8"-11	15/16"	29/64"	25/32"	0.06"	51/64"	ASME B1.1	Material Certificate	10	93560A280	00000
		5/8"-11	15/16"	29/64"	25/32"	0.085"	51/64"	ASME B1.1	—	10	93560A111	00000
		3/4"-10	1 15/64"	5/8"	31/32"	0.06"	63/64"	ASME B1.1	Material Certificate	5	93560A290	00000
		M3 × 0.5 mm	7.5 mm	2.45 mm	4.5 mm	0.55 mm	4.5 mm	DIN 929	—	100	93337A400	00000


		M4 × 0.7 mm	9 mm	2.85 mm	6 mm	0.65 mm	6 mm	DIN 929	—	100	93337A500	00000
		M5 × 0.8 mm	10 mm	3.3 mm	7 mm	0.7 mm	7 mm	DIN 929	—	100	93337A600	00000
		M6 × 1 mm	11 mm	4.25 mm	8 mm	0.75 mm	8 mm	DIN 929	Material Certificate	50	93337A110	0000
		M8 × 1.25 mm	14 mm	5.6 mm	10.5 mm	0.9 mm	10.5 mm	DIN 929	Material Certificate	50	93337A210	00000
		M10 × 1.25 mm	17 mm	6.85 mm	12.5 mm	1.15 mm	12.5 mm	DIN 929	—	25	93337A111	00000
		M10 × 1.5 mm	17 mm	6.85 mm	12.5 mm	1.15 mm	12.5 mm	DIN 929	Material Certificate	25	93337A310	00000
		M12 × 1.75 mm	19 mm	8.6 mm	14.8 mm	1.4 mm	14.8 mm	DIN 929	—	25	93337A700	00000
		M14 × 2 mm	22 mm	9.2 mm	16.8 mm	1.8 mm	16.8 mm	DIN 929	—	10	93337A800	00000
		M16 × 2 mm	24 mm	11.2 mm	18.8 mm	1.8 mm	18.8 mm	DIN 929	Material Certificate	10	93337A900	00000


		18-8 Stainless Steel



				1/4"-20	1/2"	3/16"	13/32"	0.047"	27/64"	ASME B1.1	Material Certificate	10	95508A100	00000


				1/4"-28	1/2"	3/16"	13/32"	0.04"	27/64"	ASME B1.1	—	10	95508A400	00000
				5/16"-18	9/16"	7/32"	15/32"	0.047"	31/64"	ASME B1.1	Material Certificate	5	95508A200	0000
				3/8"-16	5/8"	1/4"	17/32"	0.047"	35/64"	ASME B1.1	Material Certificate	5	95508A300	0000
				1/2"-13	13/16"	3/8"	23/32"	0.06"	47/64"	ASME B1.1	Material Certificate	5	95508A500	00000
				M3 × 0.5 mm	7.5 mm	2.5 mm	4.5 mm	0.55 mm	4.5 mm	DIN 929	—	100	93418A200	00000
				M4 × 0.7 mm	9 mm	2.9 mm	6 mm	0.65 mm	6 mm	DIN 929	—	50	93418A300	0000
				M5 × 0.8 mm	10 mm	3.3 mm	7 mm	0.7 mm	7 mm	DIN 929	Material Certificate	50	93418A400	00000
				M6 × 1 mm	11 mm	4.3 mm	8 mm	0.75 mm	8 mm	DIN 929	Material Certificate	25	93418A500	0000
				M8 × 1.25 mm	14 mm	5.6 mm	10.5 mm	0.9 mm	10.5 mm	DIN 929	Material Certificate	25	93418A600	00000
				M10 × 1.5 mm	17 mm	6.9 mm	12.5 mm	1.15 mm	12.5 mm	DIN 929	Material Certificate	10	93418A700	0000


				M12 × 1.75 mm	19 mm	8.6 mm	14.8 mm	1.4 mm	14.8 mm	DIN 929	—	10	93418A800	00000
				M16 × 2 mm	24 mm	11.2 mm	18.8 mm	1.8 mm	18.8 mm	DIN 929	Material Certificate	1	93418A900	00000


Grade 2 Titanium



				10-24	1/2"	3/16"	13/32"	0.04"	13/32"	ASME B1.1	—	1	93382A110	00000


				1/4"-20	1/2"	3/16"	13/32"	0.047"	13/32"	ASME B1.1	—	1	93382A120	00000
				5/16"-18	9/16"	7/32"	15/32"	0.047"	15/32"	ASME B1.1	—	1	93382A130	00000
				3/8"-16	5/8"	1/4"	17/32"	0.047"	17/32"	ASME B1.1	—	1	93382A140	00000
				1/2"-13	13/16"	3/8"	23/32"	0.063"	23/32"	ASME B1.1	—	1	93382A150	00000
				M6 × 1 mm	11 mm	4.3 mm	8 mm	0.75 mm	8 mm	DIN 929	—	1	93382A160	00000
				M8 × 1.25 mm	14 mm	5.6 mm	10.5 mm	0.9 mm	10.5 mm	DIN 929	—	1	93382A170	00000
				M10 × 1.5 mm	17 mm	6.9 mm	12.5 mm	1.15 mm	12.5 mm	DIN 929	—	1	93382A180	00000

Corner Weld Nuts

Create permanent, threaded 90° joints in sheet metal. Shaped like corner brackets, they’re often used to add mounting brackets in assemblies such as motors and heaters. These nuts have two projections that concentrate heat away from the threads to prevent them from deforming and create consistent welds.

Steel—Best for dry environments since moisture will cause them to rust. Made of uncoated steel, these nuts require minimal prep. Weld them to uncoated steel surfaces.

18-8 Stainless Steel—Suitable for outdoor use, these nuts resist rust from water and mild chemicals. Weld them to stainless steel surfaces.

		Base				Barrel
	Thread Size	Lg. (A)	Lg. (B)	Wd.	Thk.	Dia.	Ht.	For Hole Dia.	Pkg. Qty.		Pkg.
Steel



		8-32	1/2"	5/8"	1/2"	1/8"	—	—	11/64"	10	90538A130	00000


		8-32	19/32"	21/32"	1/2"	1/8"	—	—	11/64"	10	90538A140	00000
		10-24	19/32"	21/32"	1/2"	1/8"	—	—	13/64"	10	90538A150	00000
		10-32	19/32"	21/32"	1/2"	1/8"	—	—	13/64"	10	90538A160	00000
		1/4"-20	3/4"	3/4"	1/2"	1/8"	5/16"	3/64"	5/16"	10	90538A110	00000
		5/16"-18	1"	1"	5/8"	5/32"	23/64"	5/64"	23/64"	10	90538A120	00000
		M5 × 0.8 mm	15.1 mm	16.6 mm	13 mm	3.2 mm	—	—	6 mm	10	90538A170	00000
		M6 × 1 mm	19.1 mm	19.1 mm	13 mm	3.2 mm	7.6 mm	1.2 mm	7.6 mm	10	90538A180	00000
		M8 × 1.25 mm	25.4 mm	25.4 mm	16.1 mm	3.6 mm	9.2 mm	2 mm	9.2 mm	10	90538A190	00000


		18-8 Stainless Steel



				10-24	19/32"	21/32"	1/2"	1/8"	—	—	13/64"	5	90536A110	0000


				10-32	19/32"	21/32"	1/2"	1/8"	—	—	13/64"	5	90536A120	00000
				5/16"-18	1"	1"	5/8"	5/32"	23/64"	5/64"	23/64"	5	90536A130	00000

Round Weld Nuts

With three projections and a short collar, weld these nuts under low-clearance areas without sacrificing strength. The projections concentrate heat away from the threads to prevent them from deforming and create consistent welds. To make welding easier, their collar pilot guides them into the hole and aligns them with the surface while also shielding the threads from weld spatter.

Steel—Best for dry environments since moisture will cause them to rust. Made of uncoated steel, these nuts require minimal prep. Weld them to uncoated steel surfaces.

18-8 Stainless Steel—Suitable for outdoor use, these nuts resist rust from water and mild chemicals. Weld them to stainless steel surfaces.

		Base		Collar
	Thread Size	Dia.	Thk.	Dia.	Ht.	Pkg. Qty.		Pkg.
Steel



		4-40	5/16"	1/16"	11/64"	0.03"	25	90583A230	00000


		6-32	11/32"	3/32"	3/16"	0.03"	25	90583A340	00000
		8-32	3/8"	7/64"	7/32"	0.03"	50	90583A240	00000
		10-24	7/16"	5/32"	1/4"	0.03"	10	90583A250	0000
		10-32	7/16"	5/32"	1/4"	0.03"	25	90583A260	0000
		1/4"-20	1/2"	3/16"	5/16"	0.047"	25	90583A270	0000
		5/16"-18	19/32"	1/4"	25/64"	0.047"	10	90583A280	0000
		M3 × 0.5 mm	8 mm	1.5 mm	4.3 mm	0.8 mm	25	90583A290	0000
		M4 × 0.7 mm	9.6 mm	2.6 mm	5.5 mm	0.8 mm	50	90583A310	0000
		M5 × 0.8 mm	11.1 mm	3.8 mm	6.3 mm	0.8 mm	25	90583A320	0000
		M6 × 1 mm	13.2 mm	4.6 mm	8 mm	1.2 mm	50	90583A330	00000


		18-8 Stainless Steel



				4-40	5/16"	1/16"	11/64"	0.03"	25	90583A170	0000


				6-32	11/32"	3/32"	3/16"	0.03"	25	90583A140	0000
				8-32	3/8"	7/64"	7/32"	0.03"	25	90583A180	0000
				10-24	7/16"	5/32"	1/4"	0.03"	10	90583A150	0000
				10-32	7/16"	5/32"	1/4"	0.03"	10	90583A130	0000
				1/4"-20	33/64"	3/16"	5/16"	0.047"	10	90583A110	0000
				M3 × 0.5 mm	7.8 mm	1.5 mm	4.3 mm	0.8 mm	25	90583A190	0000
				M4 × 0.7 mm	9.4 mm	2.6 mm	5.5 mm	0.8 mm	25	90583A210	0000
				M5 × 0.8 mm	11.2 mm	3.8 mm	6.3 mm	0.8 mm	10	90583A220	0000
				M6 × 1 mm	13.2 mm	4.6 mm	8 mm	1.2 mm	10	90583A120	0000

Two-Barrel Low-Profile Rectangular Weld Nuts

Fuse two threaded holes to metal with just one weld. These weld nuts have two short barrels with the same threads for installing screws side by side. They add the strength of two joints with a single nut. Their slim footprint fits in tight areas such as channels.

Steel—Best for dry environments since moisture will cause them to rust. Made of uncoated steel, these nuts require minimal prep. Weld them to uncoated steel surfaces.

		Base			Barrel
	Thread Size	Lg.	Wd.	Thk.	Dia.	Ht.	For Hole Dia.	Pkg. Qty.		Pkg.
Steel



		6-32	7/8"	1/2"	3/32"	3/16"	1/32"	13/64"	10	92262A250	000000


		6-32	1 3/8"	1/2"	3/32"	3/16"	1/32"	13/64"	10	92262A210	0000
		8-32	7/8"	1/2"	3/32"	13/64"	1/32"	7/32"	10	92262A220	0000
		8-32	1 3/8"	1/2"	3/32"	13/64"	1/32"	7/32"	10	92262A150	0000
		10-24	1 1/8"	1/2"	3/32"	15/64"	1/32"	1/4"	10	92262A180	0000
		10-24	1 5/8"	1/2"	3/32"	15/64"	1/32"	1/4"	10	92262A170	00000
		10-32	1 1/8"	1/2"	3/32"	15/64"	1/32"	1/4"	10	92262A230	0000
		10-32	1 5/8"	1/2"	3/32"	15/64"	1/32"	1/4"	10	92262A240	0000
		1/4"-20	1 1/4"	1/2"	1/8"	19/64"	3/64"	5/16"	10	92262A160	00000
		1/4"-20	1 1/2"	1/2"	1/8"	19/64"	3/64"	5/16"	10	92262A130	0000
		1/4"-20	1 3/4"	1/2"	1/8"	19/64"	3/64"	5/16"	10	92262A140	0000


		1/4"-20	2"	1/2"	1/8"	19/64"	3/64"	5/16"	10	92262A190	00000
		5/16"-18	1 11/16"	5/8"	9/64"	23/64"	5/64"	3/8"	10	92262A120	00000
		3/8"-16	2 1/16"	5/8"	9/64"	7/16"	3/32"	29/64"	10	92262A110	00000

Weld Locknuts

Prevent screws from backing out under heavy vibration. These nuts have distorted threads that grip screws tightly. Three evenly spaced projections concentrate heat away from the threads to prevent them from deforming and create consistent welds. These nuts also have a collar pilot that guides the nut into the hole, holds it in place while welding, and protects the threads from weld spatter.

Use Grade 2 or Class 6 screws to avoid stripping threads during installation. Distorted threads require high torque for fastening and unfastening, so you may need an impact wrench to remove screws.

Steel—Best for dry environments since moisture will cause them to rust. Made of uncoated steel, these nuts require minimal prep. Weld them to uncoated steel surfaces.

				Collar
	Thread Size	Wd.	Ht.	Dia.	Ht.	For Hole Dia.	Pkg. Qty.		Pkg.
Steel



		10-24	1/2"	3/16"	13/32"	0.04"	27/64"	10	90744A150	00000


		10-32	1/2"	3/16"	13/32"	0.04"	27/64"	10	90744A140	0000
		1/4"-20	15/32"	11/64"	13/32"	0.04"	27/64"	100	90744A240	00000
		1/4"-20	1/2"	3/16"	13/32"	0.085"	27/64"	25	90744A210	0000
		5/16"-18	35/64"	13/64"	15/32"	0.04"	31/64"	100	90744A250	00000
		5/16"-18	9/16"	7/32"	15/32"	0.085"	31/64"	10	90744A350	0000
		3/8"-16	39/64"	15/64"	17/32"	0.05"	35/64"	50	90744A260	00000
		3/8"-16	5/8"	1/4"	17/32"	0.085"	35/64"	10	90744A170	0000
		1/2"-13	25/32"	23/64"	23/32"	0.06"	47/64"	50	90744A270	00000
		1/2"-13	25/32"	23/64"	23/32"	0.085"	47/64"	50	90744A280	00000
		5/8"-11	59/64"	27/64"	25/32"	0.085"	51/64"	25	90744A290	00000


		5/8"-11	15/16"	7/16"	25/32"	0.085"	51/64"	5	90744A230	0000
		M5 × 0.8 mm	11 mm	5.5 mm	7.6 mm	0.9 mm	7.6 mm	10	90744A360	0000
		M6 × 1 mm	12.7 mm	5.1 mm	8.8 mm	1 mm	8.8 mm	100	90744A310	00000
		M6 × 1 mm	13 mm	5.5 mm	9.1 mm	1.6 mm	9.1 mm	25	90744A220	0000
		M8 × 1.25 mm	14.7 mm	6.6 mm	10.9 mm	1 mm	10.9 mm	50	90744A320	00000
		M8 × 1.25 mm	15 mm	7 mm	11.1 mm	1.8 mm	11.1 mm	10	90744A180	0000
		M10 × 1.5 mm	17.7 mm	7.7 mm	13.4 mm	1.16 mm	13.4 mm	50	90744A330	00000
		M10 × 1.5 mm	18 mm	8 mm	13.6 mm	1.8 mm	13.6 mm	10	90744A190	0000
		M12 × 1.75 mm	20.6 mm	9.4 mm	15.9 mm	1.26 mm	15.9 mm	50	90744A340	00000
		M12 × 1.75 mm	21 mm	9.7 mm	16.1 mm	1.8 mm	16.1 mm	10	90744A160	0000


		M16 × 2 mm	26 mm	13 mm	20.6 mm	1.3 mm	20.6 mm	5	90744A130	0000

Left-Hand-Thread Tube End Weld Nuts

These weld nuts prevent fasteners from backing out of assemblies that rotate counterclockwise. Their left-hand threads pair with left-hand screws and rods to stop the fastener from loosening as the assembly turns. Weld them to the end of a tube for a stronger connection than tapping the tube directly. Also known as tube adapters and weldable threaded tube ends.

	Thread Size	Ht.	Threading	Thread Lg.		Each
4130 Alloy Steel







			For 3/8" OD Tubes

			0.058"	10-32	1"	Fully Threaded	1"	94640A872	00000




					For 1/2" OD Tubes

					0.058"	1/4"-28	1"	Fully Threaded	1"	94640A882	0000


					0.058"	5/16"-24	1"	Fully Threaded	1"	94640A101	0000




							For 5/8" OD Tubes

							0.058"	5/16"-24	1"	Partially Threaded	3/4"	94640A102	0000


							0.058"	3/8"-24	1"	Partially Threaded	3/4"	94640A103	0000
							0.058"	7/16"-20	1"	Fully Threaded	1"	94640A104	0000




									For 3/4" OD Tubes

									0.058"	5/16"-24	1"	Partially Threaded	3/4"	94640A105	0000


									0.058"	3/8"-24	1"	Fully Threaded	1"	94640A106	0000
									0.058"	7/16"-20	1"	Fully Threaded	1"	94640A107	0000
									0.065"	5/16"-24	1 3/8"	Partially Threaded	7/8"	94640A114	0000
									0.065"	3/8"-24	1 3/8"	Partially Threaded	15/16"	94640A119	0000
									0.065"	7/16"-20	1 3/8"	Partially Threaded	1 1/8"	94640A108	0000




											For 7/8" OD Tubes

											0.058"	3/8"-24	1 3/8"	Partially Threaded	1"	94640A154	0000


											0.058"	7/16"-20	1 3/8"	Partially Threaded	1 1/8"	94640A159	0000
											0.058"	1/2"-20	1 3/8"	Partially Threaded	1 1/4"	94640A164	0000
											0.065"	3/8"-24	1 3/8"	Partially Threaded	1"	94640A109	0000
											0.065"	7/16"-20	1 3/8"	Partially Threaded	1"	94640A201	0000
											0.065"	1/2"-20	1 3/8"	Partially Threaded	1 1/4"	94640A202	0000
											0.083"	3/8"-24	1 1/2"	Partially Threaded	1"	94640A203	0000
											0.083"	7/16"-20	1 1/2"	Partially Threaded	1 1/8"	94640A204	0000
											0.083"	1/2"-20	1 1/2"	Partially Threaded	1 1/4"	94640A205	0000




											For 1" OD Tubes

											0.058"	3/8"-24	1 1/2"	Partially Threaded	1"	94640A206	0000


	0.058"	1/2"-20									1 1/2"	Partially Threaded	1 1/4"	94640A224	0000
	0.058"	5/8"-18									1 1/2"	Fully Threaded	1 1/2"	94640A229	0000
	0.065"	3/8"-24									1 1/2"	Partially Threaded	1"	94640A208	0000
	0.065"	7/16"-20									1 1/2"	Partially Threaded	1"	94640A209	0000
	0.065"	1/2"-20									1 1/2"	Partially Threaded	1 1/4"	94640A244	0000
	0.065"	5/8"-18	1 1/2"								Fully Threaded	1 1/2"	94640A249	0000
	0.083"	3/8"-24	1 1/2"	Partially Threaded							1"	94640A301	0000
	0.083"	1/2"-20	1 1/2"	Partially Threaded							1 1/4"	94640A269	0000
	0.083"	5/8"-18	1 1/2"	Fully Threaded							1 1/2"	94640A274	0000
	0.095"	3/8"-24	1 1/2"	Partially Threaded							1"	94640A303	0000


	0.095"	7/16"-20	1 1/2"	Partially Threaded							1"	94640A304	0000
	0.095"	1/2"-20	1 1/2"	Partially Threaded							1 1/4"	94640A289	0000
	0.095"	5/8"-18	1 1/2"	Fully Threaded							1 1/2"	94640A294	0000




			For 1 1/8" OD Tubes

			0.058"	1/2"-20	1 1/2"	Partially Threaded					1 1/4"	94640A305	0000


			0.058"	5/8"-18	1 1/2"	Fully Threaded					1 1/2"	94640A306	0000
			0.065"	1/2"-20	1 1/2"	Partially Threaded					1 1/4"	94640A307	0000
			0.065"	5/8"-18	1 1/2"	Fully Threaded					1 1/2"	94640A308	0000
			0.083"	5/8"-18	1 1/2"	Fully Threaded	1 1/2"				94640A401	0000
			0.083"	3/4"-16	1 1/2"	Fully Threaded	1 1/2"	94640A402			0000
			0.095"	1/2"-20	1 1/2"	Partially Threaded	1 1/4"	94640A403			0000
			0.095"	5/8"-18	1 1/2"	Fully Threaded	1 1/2"	94640A404			0000
			0.095"	3/4"-16	1 1/2"	Fully Threaded	1 1/2"	94640A405			0000




					For 1 1/4" OD Tubes

					0.095"	5/8"-18	1 1/2"	Fully Threaded			1 1/2"	94640A354	00000


					0.095"	3/4"-16	1 1/2"	Fully Threaded			1 1/2"	94640A359	00000
					0.12"	5/8"-18	1 7/8"	Partially Threaded	1 9/16"	94640A364	00000
					0.12"	3/4"-16	1 7/8"	Fully Threaded	1 7/8"	94640A369	00000




							For 1 3/8" OD Tubes

							0.095"	5/8"-18	1 7/8"	Partially Threaded	1 9/16"	94640A406	00000


							0.095"	3/4"-16	1 7/8"	Fully Threaded	1 7/8"	94640A407	00000
							0.12"	5/8"-18	1 7/8"	Partially Threaded	1 9/16"	94640A408	00000
							0.12"	3/4"-16	1 7/8"	Fully Threaded	1 7/8"	94640A409	00000




							For 1 1/2" OD Tubes

							0.095"	5/8"-18	1 7/8"	Partially Threaded	1 5/8"	94640A501	00000


							0.095"	3/4"-16	1 7/8"	Fully Threaded	1 7/8"	94640A502	00000
							0.12"	3/4"-16	2"	Partially Threaded	1 7/8"	94640A414	00000
							0.25"	3/4"-16	2"	Fully Threaded	2"	94640A503	00000
							0.25"	7/8"-14	2"	Fully Threaded	2"	94640A504	00000




									For 1 3/4" OD Tubes

									0.12"	3/4"-16	2"	Fully Threaded	2"	94640A505	00000


									0.12"	1"-14	2"	Fully Threaded	2"	94640A507	00000
									0.12"	1 1/4"-12	2"	Fully Threaded	2"	94640A508	00000
									0.25"	3/4"-16	2"	Partially Threaded	1 7/8"	94640A509	00000
	0.25"								7/8"-14	2"	Fully Threaded	2"	94640A601	00000
	0.25"	1"-14							2"	Fully Threaded	2"	94640A464	00000




									For 2" OD Tubes

									0.25"	1 1/4"-12	3 1/4"	Fully Threaded	3 1/4"	94640A602	00000

Tube End Weld Nuts

Weld these nuts into tube ends to attach threaded fittings such as rod ends. The welded connection is stronger than tapping a tube directly. These nuts are often used to link control arms and suspensions. Also known as tube adapters and weldable threaded tube ends.

	For Tube Wall Thk.	Thread Size	Ht.	Threading	Thread Lg.		Each
4130 Alloy Steel







				For 3/8" OD Tubes

				0.058"	10-32	1"	Fully Threaded	1"	94640A871	00000




						For 1/2" OD Tubes

						0.058"	1/4"-28	1"	Fully Threaded	1"	94640A881	0000


						0.058"	5/16"-24	1"	Fully Threaded	1"	94640A120	0000




								For 5/8" OD Tubes

								0.058"	5/16"-24	1"	Partially Threaded	3/4"	94640A130	0000


								0.058"	3/8"-24	1"	Partially Threaded	3/4"	94640A140	0000
								0.058"	7/16"-20	1"	Fully Threaded	1"	94640A170	0000




										For 3/4" OD Tubes

										0.058"	5/16"-24	1"	Partially Threaded	3/4"	94640A180	0000


										0.058"	3/8"-24	1"	Fully Threaded	1"	94640A190	0000
										0.058"	7/16"-20	1"	Fully Threaded	1"	94640A210	0000
										0.065"	5/16"-24	1 3/8"	Partially Threaded	7/8"	94640A110	0000
										0.065"	3/8"-24	1 3/8"	Partially Threaded	15/16"	94640A115	0000
										0.065"	7/16"-20	1 3/8"	Partially Threaded	1 1/8"	94640A230	0000




												For 7/8" OD Tubes

												0.058"	3/8"-24	1 3/8"	Partially Threaded	15/16"	94640A150	0000


												0.058"	7/16"-20	1 3/8"	Partially Threaded	1 1/8"	94640A155	0000
												0.058"	1/2"-20	1 3/8"	Partially Threaded	1 1/4"	94640A160	0000
												0.065"	3/8"-24	1 3/8"	Partially Threaded	15/16"	94640A250	0000
												0.065"	7/16"-20	1 3/8"	Partially Threaded	1"	94640A260	0000
												0.065"	1/2"-20	1 3/8"	Partially Threaded	1 1/4"	94640A280	0000
												0.083"	3/8"-24	1 1/2"	Partially Threaded	15/16"	94640A310	0000
												0.083"	7/16"-20	1 1/2"	Partially Threaded	1 1/8"	94640A320	0000
												0.083"	1/2"-20	1 1/2"	Partially Threaded	1 1/4"	94640A330	0000




												For 1" OD Tubes

												0.058"	3/8"-24	1 1/2"	Partially Threaded	15/16"	94640A340	0000


		0.058"	7/16"-20									1 1/2"	Partially Threaded	1"	94640A370	0000
		0.058"	1/2"-20									1 1/2"	Partially Threaded	1 1/4"	94640A220	0000
		0.058"	5/8"-18									1 1/2"	Fully Threaded	1 1/2"	94640A225	0000
		0.065"	3/8"-24									1 1/2"	Partially Threaded	15/16"	94640A380	0000
		0.065"	7/16"-20									1 1/2"	Partially Threaded	1"	94640A390	0000
		0.065"	1/2"-20	1 1/2"								Partially Threaded	1 1/4"	94640A240	0000
		0.065"	5/8"-18	1 1/2"	Fully Threaded							1 1/2"	94640A245	0000
		0.083"	3/8"-24	1 1/2"	Partially Threaded							15/16"	94640A420	0000
		0.083"	7/16"-20	1 1/2"	Partially Threaded							1"	94640A430	0000
		0.083"	1/2"-20	1 1/2"	Partially Threaded							1 1/4"	94640A265	0000


		0.083"	5/8"-18	1 1/2"	Fully Threaded							1 1/2"	94640A270	0000
		0.095"	3/8"-24	1 1/2"	Partially Threaded							15/16"	94640A440	0000
		0.095"	7/16"-20	1 1/2"	Partially Threaded							1"	94640A450	0000
		0.095"	1/2"-20	1 1/2"	Partially Threaded	1 1/4"						94640A285	0000
		0.095"	5/8"-18	1 1/2"	Fully Threaded	1 1/2"	94640A290					0000




				For 1 1/8" OD Tubes

				0.058"	1/2"-20	1 1/2"	Partially Threaded					1 1/4"	94640A470	0000


				0.058"	5/8"-18	1 1/2"	Fully Threaded					1 1/2"	94640A480	0000
				0.065"	1/2"-20	1 1/2"	Partially Threaded	1 1/4"				94640A490	0000
				0.065"	5/8"-18	1 1/2"	Fully Threaded	1 1/2"	94640A520			0000
				0.083"	1/2"-20	1 1/2"	Partially Threaded	1 1/4"	94640A530			0000
				0.083"	5/8"-18	1 1/2"	Fully Threaded	1 1/2"	94640A540			0000
				0.083"	3/4"-16	1 1/2"	Fully Threaded	1 1/2"	94640A570			0000
				0.095"	1/2"-20	1 1/2"	Partially Threaded	1 1/4"	94640A580			0000
				0.095"	5/8"-18	1 1/2"	Fully Threaded	1 1/2"	94640A590			0000
				0.095"	3/4"-16	1 1/2"	Fully Threaded	1 1/2"	94640A610			0000




						For 1 1/4" OD Tubes

						0.095"	5/8"-18	1 1/2"	Fully Threaded			1 1/2"	94640A350	00000


						0.095"	3/4"-16	1 1/2"	Fully Threaded	1 1/2"	94640A355	00000
						0.12"	5/8"-18	1 7/8"	Partially Threaded	1 9/16"	94640A360	00000
						0.12"	3/4"-16	1 7/8"	Fully Threaded	1 7/8"	94640A365	00000




								For 1 3/8" OD Tubes

								0.095"	5/8"-18	1 7/8"	Partially Threaded	1 9/16"	94640A630	00000


								0.095"	3/4"-16	1 7/8"	Fully Threaded	1 7/8"	94640A650	00000
0.12"								5/8"-18	1 7/8"	Partially Threaded	1 9/16"	94640A660	00000
0.12"	3/4"-16							1 7/8"	Fully Threaded	1 7/8"	94640A680	00000




								For 1 1/2" OD Tubes

								0.095"	5/8"-18	1 7/8"	Partially Threaded	1 9/16"	94640A710	00000


								0.095"	3/4"-16	1 7/8"	Fully Threaded	1 7/8"	94640A720	00000
								0.12"	3/4"-16	2"	Partially Threaded	1 7/8"	94640A410	00000
								0.12"	7/8"-14	2"	Fully Threaded	2"	94640A415	00000
								0.25"	3/4"-16	2"	Fully Threaded	2"	94640A730	00000
								0.25"	7/8"-14	2"	Fully Threaded	2"	94640A740	00000




										For 1 3/4" OD Tubes

										0.12"	3/4"-16	2"	Fully Threaded	2"	94640A770	00000


										0.12"	7/8"-14	2"	Fully Threaded	2"	94640A780	00000
		0.12"								1"-14	2"	Fully Threaded	2"	94640A790	00000
		0.12"	1 1/4"-12							2"	Fully Threaded	2"	94640A820	00000
		0.25"	3/4"-16							2"	Partially Threaded	1 7/8"	94640A830	00000
		0.25"	7/8"-14							2"	Fully Threaded	2"	94640A840	00000
		0.25"	1"-14							2"	Fully Threaded	2"	94640A460	00000




										For 2" OD Tubes

										0.25"	1 1/4"-12	3 1/4"	Fully Threaded	3 1/4"	94640A850	00000