McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    57 Products

    Bit Sets

    Image of Product. Hex Shank. Front orientation. Screwdriver Bits. Bit Sets, For Hand Tools.

    Hex Shank

    Have a range of bits ready to turn the most common screw styles and sizes.
    Hex Shank—Also known as insert bits, these snap into hand tools. If you want to use them with power tools, attach a bit adapter (not included).
    Steel—Best for dry environments, since moisture will cause these bits to rust.
    No. of
    Pieces
    Components Included
    Bits Included
    Adapters Included
    Drive Tools Included
    Material
    Container
    Type
    Each
    For Hand Tools
     
    1/4" Hex Shank Size
    381 Adapter
    1 Drive Tool
    36 Bits    		Drilled Spanner: No. 4, No. 6, No. 8, No. 10 (1" O'all Lg.)
    Phillips: No. 1 (1" O'all Lg.) - 1 ea.
    Phillips: No. 2 (1" O'all Lg.) - 2 ea.
    Pozidriv®: No. 0, No. 1, No. 2, No. 3 (1" O'all Lg.)
    Slotted: 5/16"
    Square: No. 1, No. 2, No. 3 (1" O'all Lg.)
    Tamper-Resistant Hex: 5/64", 3/32", 7/64", 1/8", 9/64", 5/32" (1" O'all Lg.)
    Tamper-Resistant Torx: T8, T10, T15, T20, T25, T27, T30, T40 (1" O'all Lg.)
    Torq-Set®: No. 6, No. 8, No. 10 (1" O'all Lg.)
    Tri-Wing®: No. 1, No. 2, No. 3, No. 4 (1" O'all Lg.)    		1/4" Hex Drive Adapter3 1/2" Lg. Ratchet WrenchSteel
    		Plastic Case5996A4000000
    391 Drive Tool
    2 Adapters
    36 Bits    		Drilled Spanner: No. 4, No. 6, No. 8, No. 10 (1" O'all Lg.)
    Phillips: No. 1, No. 2 (1" O'all Lg.)
    Pozidriv®: No. 0, No. 1, No. 2, No. 3 (1" O'all Lg.)
    Slotted: 1/4", 5/16" (1" O'all Lg.)
    Square: No. 1, No. 2, No. 3 (1" O'all Lg.)
    Tamper-Resistant Hex: 5/64", 3/32", 7/64", 1/8", 9/64", 5/32" (1" O'all Lg.)
    Tamper-Resistant Torx: T8, T10, T15, T20, T25, T27, T30, T40 (1" O'all Lg.)
    Torq-Set®: No. 6, No. 8, No. 10 (1" O'all Lg.)
    Tri-Wing®: No. 1, No. 2, No. 3, No. 4 (1" O'all Lg.)    		1/4" Female Square Drive × 1/4" Female Hex Adapter
    2 1/4" Lg. Bit Adapter for Power Tools    		Screwdriver HandleSteel
    		Plastic Case5996A1200000
    1004 Adapters
    96 Bits    		Drilled Spanner: No. 4, No. 6, No. 8, No. 10, No. 12, 1/4" (1" O'all Lg.)—1 ea.
    Hex (Inch): 0.050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8" (1" O'all Lg.)—1 ea.
    Hex (Metric): 1.5 mm, 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 7 mm, 8 mm (1" O'all Lg.)—1 ea.
    Phillips: No. 0 (1" O'all Lg.)—1 ea.
    Phillips: No. 1, No. 3 (1" O'all Lg.)—2 ea.
    Phillips: No. 2 (1" O'all Lg.)—4 ea.
    Pozidriv®: No. 1, No. 2, No. 3 (1" O'all Lg.)—1 ea.
    Screw-In Hook Driver Bit—1 ea.
    Slotted: 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 3/8" (1" O'all Lg.)—1 ea.
    Square: No. 0, No. 1, No. 2, No. 3, No. 4 (1" O'all Lg.)—1 ea.
    Tamper-Resistant Hex (Inch): 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16" (1" O'all Lg.)—1 ea.
    Tamper-Resistant Hex (Metric): 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm (1" O'all Lg.)—1 ea.
    Tamper-Resistant Torx: T6, T7, T8, T9, T10, T15, T20, T25, T27, T30, T40 (1" O'all Lg.)—1 ea.
    Torx: T5, T6, T7, T8, T9, T10, T15, T20, T25, T27, T30, T40, T45, T50, T55 (1" O'all Lg.)—1 ea.    		1/4" Male Square Drive × 1/4" Hex Shank Adapter (1" O'all Lg.)
    1/4" Male Square Drive × 1/4" Hex Shank Adapter (2" O'all Lg.)
    2 1/2" Lg. Bit Adapter for Power Tools
    Bit Adapter for Square Drive Tools    		—Steel
    		Plastic Case2599N100000
     

    Tamper-Resistant Hex Bits

    These bits fit around the security pin to turn tamper-resistant hex screws. Use them to unlock electronic enclosures and other access-controlled equipment. Their six contact points deliver more torque than slotted and Phillips bits without slipping and stripping the drive. Also known as pin-in-hex or pin-in-socket bits.
    Hex Shank—Also known as insert bits, these snap into hand tools. If you want to use them with power tools, attach a bit adapter (not included).
    Quick-Change Hex Shank—Lock these bits directly into power tools. They won't wobble as much as bits paired with an adapter, so they are the best choice for high-precision tasks.
    Steel—Best for dry environments, since moisture will cause these bits to rust.
    Drive
    Size
    Overall
    Lg.
    Material
    Each
    For Hand Tools
    Image of Product. Hex Shank. Front orientation. Screwdriver Bits. Tamper-Resistant Hex Bits, For Hand Tools.

    Hex Shank

     
    1/4" Hex Shank Size
    5/64"1"Steel
    		7257A8500000
    3/32"1"Steel
    		7257A630000
    7/64"1"Steel
    		7257A640000
    1/8"1"Steel
    		7257A220000
    9/64"1"Steel
    		7257A270000
    5/32"1"Steel
    		7257A230000
    3/16"1"Steel
    		7257A240000
    7/32"1"Steel
    		7257A250000
    1/4"1"Steel
    		7257A280000
    5/16"1"Steel
    		7257A290000
    3/8"1"Steel
    		7257A310000
    2 mm1"Steel
    		7257A110000
    2.5 mm1"Steel
    		7257A510000
    3 mm1"Steel
    		7257A520000
    4 mm1"Steel
    		7257A530000
    5 mm1"Steel
    		7257A540000
    6 mm1"Steel
    		7257A550000
    8 mm1"Steel
    		7257A560000
     
    For Power Tools
    Image of Product. Quick-Change Hex Shank. Front orientation. Screwdriver Bits. Tamper-Resistant Hex Bits, For Power Tools.

    Quick-Change Hex

    Shank

     
    1/4" Quick-Change Hex Shank Size
    3/32"2"Steel
    		7240A310000
    7/64"2"Steel
    		7240A320000
    1/8"2"Steel
    		7240A330000
    1/8"6"Steel
    		7240A410000
    9/64"2"Steel
    		7240A340000
    9/64"6"Steel
    		7240A420000
    5/32"2"Steel
    		7240A350000
    5/32"6"Steel
    		7240A430000
    3/16"2"Steel
    		7240A360000
    3/16"6"Steel
    		7240A440000
    7/32"2"Steel
    		7240A370000
    7/32"6"Steel
    		7240A450000
    1/4"2"Steel
    		7240A380000
    1/4"6"Steel
    		7240A460000
    5/16"2"Steel
    		7240A390000
    5/16"6"Steel
    		7240A4700000
    3/8"2"Steel
    		7240A520000
    3/8"6"Steel
    		7240A5300000
    2 mm3 1/2"Steel
    		7240A110000
    2.5 mm2"Steel
    		7240A650000
    3 mm2"Steel
    		7240A660000
    4 mm2"Steel
    		7240A670000
    5 mm2"Steel
    		7240A680000
    6 mm2"Steel
    		7240A690000
    8 mm2"Steel
    		7240A710000
     

    Bit Screwdrivers

    Image of Product. Front orientation. Contains Inset. Screwdrivers. Bit Screwdrivers, Bit Screwdrivers with Bit Storage in Handle.

    Bit Screwdrivers with Bit

    Storage in Handle

    Don't lug around a toolbox full of drivers—just swap out the bit to drive multiple screw sizes and styles with one tool. The ultimate space savers, these bit screwdrivers are a smart solution for on-the-go jobs.
    Premium—The best screwdrivers available, with handles that keep you comfortable during long stretches of use. They come with high-quality bits that fit snugly into fastener recesses to turn screws quickly without slipping.
    Shaft
    No. of
    Sizes
    Sizes Included
    For Bit Hex
    Shank Size
    Relative
    Lg.
    Overall
    Lg.
    Lg.
    Overall
    Wd.
    Material
    Bit-Holding
    Mechanism
    Mfr.
    Each
    Bit Screwdrivers with Bit Storage in Handle
     
    Premium
    26Torq-Set®: No. 6, No. 8, No. 10
    Drilled Spanner: No. 4, No. 6, No. 8, No. 10
    Tamper-Resistant Hex: 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 2 mm, 2.5 mm, 3 mm, 5 mm
    Tamper-Resistant Torx: T7, T8, T10, T15, T20, T25, T27, T30, T40    		1/4"Standard8 1/2"3 3/8"5/16"Stainless SteelMagnetKlein Tools7262A49000000
     

    Tamper-Resistant Hex Bit Sets

    Image of Product. Hex Shank. Front orientation. Screwdriver Bits. Tamper-Resistant Hex Bit Sets, For Hand Tools.
    Image of Product. Quick-Change Hex Shank. Front orientation. Screwdriver Bits. Tamper-Resistant Hex Bit Sets, For Power Tools.

    Hex Shank

    Quick-Change Hex

    Shank

    Turn a variety of tamper-resistant hex screws on electronic enclosures and other access-controlled equipment. Their six contact points deliver more torque than slotted and Phillips bits without slipping and stripping the drive. Also known as pin-in-hex or pin-in-socket bits.
    Hex Shank—Also known as insert bits, these snap into hand tools. If you want to use them with power tools, attach a bit adapter (not included).
    Quick-Change Hex Shank—Lock these bits directly into power tools. They won't wobble as much as bits paired with an adapter, so they are the best choice for high-precision tasks.
    Steel—Best for dry environments, since moisture will cause these bits to rust.
    Components
    Included
    Bits Included
    Material
    Container
    Type
    Each
    For Hand Tools
     
    1/4" Hex Shank Size
    6 BitsTamper-Resistant Hex: 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm (1" O'all Lg.)Steel
    		Plastic Caddy7257A61000000
    11 BitsTamper-Resistant Hex: 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8" (1" O'all Lg.)Steel
    		Plastic Pouch7257A4100000
     
    For Power Tools
     
    1/4" Quick-Change Hex Shank Size
    6 BitsTamper-Resistant Hex: 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm (2" O'all Lg.)Steel
    		Plastic Caddy7240A7400000
    8 BitsTamper-Resistant Hex: 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" (2" O'all Lg.)Steel
    		Plastic Caddy7240A5500000
     

    Cushion-Grip Screwdrivers

    Image of Product. Front orientation. Screwdrivers. Cushion-Grip Screwdrivers.
    These iconic screwdrivers have a rubberized, cushioned grip over a hard plastic core for comfort and control.
    Premium—The best screwdrivers available, with tips machined to tight tolerances for the tightest possible fit in fastener recesses. The snug fit means they'll turn screws quickly without wearing screw heads and the driver's tip.
    Standard Length—The most common screwdriver length for a specific drive size.
    Shaft
    Drive
    Size
    Relative
    Lg.
    Overall
    Lg.
    Lg.
    Overall
    Wd.
    Material
    Mfr.
    Each
    Tamper-Resistant Hex
     
    Premium
    3/32"Standard5 1/4"2 13/16"3/32"Phosphate-Coated SteelBondhus7253A6100000
    1/8"Standard6 5/8"3 1/8"1/8"Phosphate-Coated SteelBondhus7253A620000
    5/32"Standard8"3 5/8"5/32"Phosphate-Coated SteelBondhus7253A630000
    3/16"Standard8 1/4"3 11/16"3/16"Phosphate-Coated SteelBondhus7253A640000
    7/32"Standard9 1/4"4 3/16"7/32"Phosphate-Coated SteelBondhus7253A6500000
    1/4"Standard9 1/2"4 11/16"1/4"Phosphate-Coated SteelBondhus7253A6600000
     
    back to top