Tank and Hopper Access Panels
Use these rectangular panels to access and inspect the interior of tanks and hoppers. All have gaskets to shut out dust and moisture. They also have a padlockable hasp that accepts up to a 5/16" dia. shackle. The panel opening is the same size as the cutout.
Screens (sold separately) create a barrier between you and hazardous material stored in a tank or hopper. Their openings are big enough to see through, but they won’t let tools or other objects fall in. Weld the brackets to the panel frame, then bolt the screen to the brackets. The screen won't fall out of the frame if it's jostled, but you can unfasten it if you need to access your tank.
Access Panels | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Cutout | O'all | Screens | |||||||||||||
| Ht. | Wd. | Lg. | Wd. | Dp. | Panel Thick. | Frame Thick. | Seal Material | Temp. Range, °F | Opens With | Padlock Included | Mount Type | Each | Each | ||
Steel Panel and Frame | |||||||||||||||
| 8" | 5" | 9" | 6 1/4" | 2 1/2" | 0.09" | 0.135" | Polyethylene Plastic | -90° to 170° | Handle | No | Weld On | 00000000 | 0000000 | 00000000 | 0000000 |
| 12" | 8" | 13" | 9" | 2 1/2" | 0.09" | 0.135" | Polyethylene Plastic | -90° to 170° | Handle | No | Weld On | 00000000 | 000000 | 00000000 | 000000 |
| 19 3/4" | 13 3/4" | 20 3/4" | 15" | 2 1/2" | 0.09" | 0.135" | Polyethylene Plastic | -90° to 170° | Handle | No | Weld On | 00000000 | 000000 | 00000000 | 000000 |
| 19 3/4" | 29 1/2" | 24 1/2" | 34 1/4" | 3 1/4" | 0.141" | 0.25" | Silicone Rubber | -80° to 550° | Handle | No | Weld On | 000000000 | 00000000 | 000000 | 00 |
| 23 1/2" | 19 3/4" | 24 3/4" | 20 3/4" | 3 1/2" | 0.09" | 0.135" | Polyethylene Plastic | -90° to 170° | Handle | No | Weld On | 00000000 | 000000 | 000000 | 00 |
| 25 1/2" | 39 1/4" | 30 1/4" | 44" | 3 1/4" | 0.141" | 0.25" | Silicone Rubber | -80° to 550° | Handle | No | Weld On | 000000000 | 00000000 | 000000 | 00 |
304 Stainless Steel Panel and Frame  | |||||||||||||||
| 8" | 5" | 9" | 6 1/4" | 2 1/2" | 0.094" | 0.141" | Polyethylene Plastic | -90° to 170° | Handle | No | Weld On | 00000000 | 000000 | 00000000 | 000000 |
| 12" | 8" | 13" | 9" | 2 1/2" | 0.094" | 0.141" | Polyethylene Plastic | -90° to 170° | Handle | No | Weld On | 00000000 | 000000 | 00000000 | 000000 |
| 19 3/4" | 13 3/4" | 20 3/4" | 15" | 2 1/2" | 0.094" | 0.141" | Polyethylene Plastic | -90° to 170° | Handle | No | Weld On | 00000000 | 00000000 | 00000000 | 000000 |
| 23 1/2" | 19 3/4" | 24 3/4" | 20 3/4" | 3 1/2" | 0.094" | 0.141" | Polyethylene Plastic | -90° to 170° | Handle | No | Weld On | 00000000 | 00000000 | 000000 | 00 |
Tank and Hopper Access Ports
Use these ports to access and inspect the interior of tanks and hoppers. All have gaskets to shut out dust and moisture. They also have a padlockable hasp that accepts up to a 5/16" dia. shackle. The panel opening is the same size as the cutout.
O'all | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Cutout Dia. | Dia. | Dp. | Panel Thick. | Frame Thick. | Seal Material | Temp. Range, °F | Opens With | Padlock Included | Mount Type | Each | |
Steel Panel and Frame | |||||||||||
| 8" | 13 5/8" | 4 3/8" | 0.135" | 0.135" | Buna-N Rubber | -40° to 250° | Handle | No | Weld On | 00000000 | 0000000 |
| 10" | 13 3/8" | 4 1/8" | 0.135" | 0.135" | Buna-N Rubber | -40° to 250° | Handle | No | Weld On | 00000000 | 000000 |
| 20" | 23 13/16" | 4 5/8" | 0.135" | 0.135" | Buna-N Rubber | -40° to 250° | Handle | No | Weld On | 00000000 | 000000 |
| 24" | 28 3/8" | 5 1/2" | 0.135" | 0.135" | Buna-N Rubber | -40° to 250° | Handle | No | Weld On | 00000000 | 00000000 |
304 Stainless Steel Panel and Frame | |||||||||||
| 8" | 13 5/8" | 4 3/8" | 0.141" | 0.141" | Buna-N Rubber | -40° to 250° | Handle | No | Weld On | 00000000 | 00000000 |
| 10" | 13 3/8" | 4 1/8" | 0.141" | 0.141" | Buna-N Rubber | -40° to 250° | Handle | No | Weld On | 00000000 | 00000000 |
| 20" | 23 13/16" | 4 5/8" | 0.141" | 0.141" | Buna-N Rubber | -40° to 250° | Handle | No | Weld On | 00000000 | 00000000 |
| 24" | 28 3/8" | 5 1/2" | 0.141" | 0.141" | Buna-N Rubber | -40° to 250° | Handle | No | Weld On | 00000000 | 00000000 |
Access Ports for Insulated Pipes
These flexible ports are often used to inspect insulated pipes and tanks for corrosion. Their frame has locking ridges to secure it in insulation that is at least 3/4" thick; no mounting screws or caulk needed. The panel fits snugly into the frame for a watertight seal. Panel opening is up to 1 1/4" smaller than the cutout.
Extended-Reach Rolling Platform Ladders
With a work platform that extends beyond the base, these rolling ladders allow you to access hard-to-reach areas, such as the top of large tanks and heavy machinery. Also known as cantilever ladders, they have counterweights that mount near the first step to offset your weight on the platform. Platform and steps are perforated for slip resistance that’s easy on your shoes. Use the wheel brakes to keep casters stationary.
Note: The number of steps listed includes the platform.
Conversion kits mount to the base to support the platform above, which lets you remove the counterweights. Kits are low profile to roll under obstacles while the platform extends over the top.
Ladders meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices. Ladders also meet CAL-OSHA standards, which is required for use in California.
Ladders | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Platform | Replacement Rigid Casters | Replacement Swivel Casters | |||||||||||||||||
| Ht. (A) | Wd. (B) | Dp. (C) | Ht. (D) | Wd. (E) | Dp. (F) | Max. Climbing Ht. | No. of Steps | Cap., lbs. | Overhang Dp. | Ground Clearance Ht. | Color | Wheel Configuration | Assembled or Unassembled | Specifications Met | Each | Each | Each | |||
Powder-Coated Steel Ladders with Wheel Brakes | ||||||||||||||||||||
Perforated Steps and Platform | ||||||||||||||||||||
| 8'6" | 30" | 92" | 5' | 24" | 40" | 5' | 6 | 300 | 40" | 58" | Yellow | Two Swivel and Two Rigid Casters | Unassembled | OSHA Compliant 29 CFR 1910.29, ANSI A14.7, Cal/OSHA Compliant Title 8 Section 3627 | 0000000 | 000000000 | 0000000 | 000000 | 0000000 | 0000000 |
| 9'4" | 30" | 101" | 5'10" | 24" | 40" | 5'10" | 7 | 300 | 40" | 68" | Yellow | Two Swivel and Two Rigid Casters | Unassembled | OSHA Compliant 29 CFR 1910.29, ANSI A14.7, Cal/OSHA Compliant Title 8 Section 3627 | 0000000 | 00000000 | 0000000 | 00000 | 0000000 | 000000 |
| 10'2" | 30" | 109" | 6'8" | 24" | 40" | 6'8" | 8 | 300 | 40" | 78" | Yellow | Two Swivel and Two Rigid Casters | Unassembled | OSHA Compliant 29 CFR 1910.29, ANSI A14.7, Cal/OSHA Compliant Title 8 Section 3627 | 0000000 | 00000000 | 0000000 | 00000 | 0000000 | 000000 |
| 11' | 30" | 117" | 7'6" | 24" | 40" | 7'6" | 9 | 300 | 40" | 88" | Yellow | Two Swivel and Two Rigid Casters | Unassembled | OSHA Compliant 29 CFR 1910.29, ANSI A14.7, Cal/OSHA Compliant Title 8 Section 3627 | 0000000 | 00000000 | 0000000 | 00000 | 0000000 | 000000 |
| Optional Conversion Kit | 0000000 | Each | 0000000 |
Rope Ladders
Locking
Snap Hooks
Attach one of these ladders to a fixed object and drop it into a tank, manhole, pit, or temporary work area. They’re lightweight so you can easily carry them anywhere.
Note: Users are responsible for checking local, state, and federal codes, including OSHA, for safe operating practices.
Overall | Hook | Step | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht., ft. | Wd. | Max. Climbing Ht. | Cap., lbs. | Wt., lbs. | Rope Dia. | Loop ID | ID | Ht. | No.of Steps | Material | Tread | Each | |
Nylon Rope | |||||||||||||
With Loop Ends | |||||||||||||
| 10 | 15" | 10' | 300 | 10 | 5/8" | 3" | __ | __ | 10 | Wood | Smooth | 0000000 | 0000000 |
| 12 | 15" | 12' | 300 | 12 | 5/8" | 3" | __ | __ | 12 | Wood | Smooth | 0000000 | 000000 |
| 15 | 15" | 15' | 300 | 15 | 5/8" | 3" | __ | __ | 15 | Wood | Smooth | 0000000 | 000000 |
| 20 | 15" | 20' | 300 | 20 | 5/8" | 3" | __ | __ | 20 | Wood | Smooth | 0000000 | 000000 |
| 25 | 15" | 25' | 300 | 25 | 5/8" | 3" | __ | __ | 25 | Wood | Smooth | 0000000 | 000000 |
| 30 | 15" | 30' | 300 | 30 | 5/8" | 3" | __ | __ | 30 | Wood | Smooth | 0000000 | 000000 |
| 40 | 15" | 40' | 300 | 40 | 5/8" | 3" | __ | __ | 40 | Wood | Smooth | 0000000 | 000000 |
| 50 | 15" | 50' | 300 | 50 | 5/8" | 3" | __ | __ | 50 | Wood | Smooth | 0000000 | 000000 |
With Locking Snap Hooks | |||||||||||||
| 10 | 15" | 10' | 300 | 10 | 5/8" | __ | 1" | 5 3/4" | 10 | Wood | Smooth | 0000000 | 000000 |
| 12 | 15" | 12' | 300 | 12 | 5/8" | __ | 1" | 5 3/4" | 12 | Wood | Smooth | 0000000 | 000000 |
| 15 | 15" | 15' | 300 | 15 | 5/8" | __ | 1" | 5 3/4" | 15 | Wood | Smooth | 0000000 | 000000 |
| 20 | 15" | 20' | 300 | 20 | 5/8" | __ | 1" | 5 3/4" | 20 | Wood | Smooth | 0000000 | 000000 |
| 25 | 15" | 25' | 300 | 25 | 5/8" | __ | 1" | 5 3/4" | 25 | Wood | Smooth | 0000000 | 000000 |
| 30 | 15" | 30' | 300 | 30 | 5/8" | __ | 1" | 5 3/4" | 30 | Wood | Smooth | 0000000 | 000000 |
| 40 | 15" | 40' | 300 | 40 | 5/8" | __ | 1" | 5 3/4" | 40 | Wood | Smooth | 0000000 | 000000 |
| 50 | 15" | 50' | 300 | 50 | 5/8" | __ | 1" | 5 3/4" | 50 | Wood | Smooth | 0000000 | 000000 |