McMaster-Carr logo
    Filter by
    System of Measurement
    Material
    Number of Taps Stored
    Overall Height
    Chamfer Type
    Thread Type
    Industrial Info Compare
    Number of Drill Bits Stored
    Container Type
    For Hole Type
    Throat Depth
    Shank Type
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    DFARS Specialty Metals
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    37 Products

    Tap and Drill Bit Stands

    For Taps and Drill Bits
    Image of Product. Front orientation. Tap and Drill Bit Stands. For Taps and Drill Bits.
    Keep taps and drill bits organized. All holes are labeled with sizes. Taps and drill bits are not included.
    Material
    No. of Taps
    Stored
    Holds Tap Sizes
    No. of Drill
    Bits Stored
    Holds Drill Bit Sizes
    Lg.
    Wd.
    Ht.
    Each
    Plastic16One each of M2, M3
    Two each of M4, M5, M6, M8, M10, M12, M14    		25Two each of 3.3 mm, 4.5 mm, 12 mm
    One each of 1.8 mm, 2.4 mm, 2.5 mm, 3.4 mm, 4.2 mm, 5 mm, 5.25 mm, 5.5 mm, 6.6 mm, 6.8 mm
    7 mm, 8.5 mm, 8.8 mm, 9 mm, 10.2 mm, 10.8 mm, 12.5 mm, 14 mm, 16 mm    		7"4 1/2"1 11/16"0000000000000
    Plastic26Two each of Nos. 2, 3, 4, 5, 6, 8, 10, 12
    Two each of 1/4", 5/16", 3/8", 7/16", 1/2"    		39Two each of 50 ga., 33 ga., 29 ga.
    One each of 47 ga., 45 ga., 44 ga., 43 ga., 42 ga., 39 ga.
    38 ga., 37 ga., 36 ga., 30 ga., 28 ga., 25 ga., 21 ga., 19 ga., 16 ga., 14 ga., 11 ga., 7 ga., 3 ga.
    One each of F, I, Q, U
    Two of 5/16"
    One each of 7/32", 1/4", 3/8", 25/64", 27/64", 7/16", 29/64", 1/2"    		7 3/8"4 11/16"1 11/16"000000000000
     

    Mounted Tap Wrenches

    Image of Product. Front orientation. Contains Annotated. Tap Wrenches. Mounted Tap Wrenches, 8 1/2" Long Base.
    Image of Product. Front orientation. Contains Annotated. Tap Wrenches. Mounted Tap Wrenches, 13" Long Base.

    8 1/2" Long Base

    13" Long Base

    Also known as hand tappers, these wrenches mount to a flat surface for stability and guide the tap straight into the hole for accurate threading.
    Base
    For Tap Size
    Lg.
    Wd.
    Throat
    Dp.
    Clearance
    Over Base
    Overall
    Ht.
    Includes
    Material
    Each
    No. 0, No. 1, No. 2, No. 3, No. 4, No. 5, No. 6, No. 8, No. 10, No. 12, 1/4", 5/16"
    		8 1/2"6"4 1/2"3 3/4"9"Seven Holders, Spindle Wrench, Tap Guide, Work TableSteel00000000000000
    No. 8, No. 10, 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4"
    		13"8"7 1/2"7"14"Nine Holders, Removable Spindle Wrench, Tap Guide, Work TableSteel0000000000000
     
    Replacement Holders
    For Tap Size
    Material
    Each
    For Wrench with 8 1/2" Long Base
    No. 0, No. 1, No. 2, No. 3, No. 4, No. 5, No. 6, M1.6, M1.8, M2, M2.2, M2.5, M3, M3.5
    		Steel0000000000000
    No. 8, M4
    		Steel000000000000
    No. 10, M4.5, M5
    		Steel000000000000
    No. 12
    		Steel000000000000
    1/4", M6, M6.3
    		Steel000000000000
    5/16", M7, M8
    		Steel000000000000
     
    For Wrench with 13" Long Base
    No. 8, M4
    		Steel000000000000
    No. 10, M4.5, M5
    		Steel000000000000
    1/4", M6, M6.3
    		Steel000000000000
    5/16", M7, M8
    		Steel000000000000
    3/8", M10
    		Steel000000000000
    7/16"
    		Steel000000000000
    1/2", M12, M12.5Steel000000000000
    5/8", M16
    		Steel000000000000
    3/4"
    		Steel000000000000
     

    Tap and Drill Bit Sets

    Image of Product. Front orientation. Tap and Drill Bit Sets. Tap and Drill Bit Sets, Metal Case.

    Metal Case

    Drill and tap a variety of hole sizes. These taps and drill bits are for use on metal and plastic.
    Uncoated Carbon Steel Tap—Uncoated carbon steel taps are for thread repair and occasional tapping.
    Uncoated High-Speed Steel Tap—Uncoated high-speed steel taps have a longer tool life than carbon steel. They are strong enough for most jobs but don’t last as long as other high-speed steel taps. Use them for small-scale jobs.
    Uncoated Cobalt Steel Tap—Uncoated cobalt steel taps have higher strength and wear resistance than carbon steel and high-speed steel taps.
    Black-Oxide High-Speed Steel Tap—Black-oxide high-speed steel taps have a longer tool life than carbon steel. They cut with less friction than uncoated taps.
    Titanium Nitride (TiN)-Coated High-Speed Steel Tap—Titanium nitride (TiN)-coated high-speed steel taps have a longer tool life than carbon steel. They resist heat and wear better than uncoated taps, letting them last up to twice as long.
    Taper Chamfer—Taper-chamfer taps have 7-10 chamfered threads at the tip for cutting into the workpiece. They require less torque than other chamfer types, making them a good choice for starting threads and tapping through holes. However, a longer taper means that they cannot thread as close to the bottom of closed-end holes.
    Plug Chamfer—Plug-chamfer taps are a versatile choice for most tapping applications. With 3-5 chamfered cutting threads, they require moderate torque and are often used for start-to-finish tapping of through holes and closed-end holes. However, they do not start threads as easily as taper chamfers. When using them to tap closed-end holes, be sure to leave sufficient space at the bottom for chips to accumulate.
    Bottoming Chamfer—Bottoming-chamfer taps cut into the workpiece with just 1-2 chamfered threads. This short chamfer lets them thread holes closer to the bottom than other taps, but they require more torque to start threads.
    Black-Oxide High-Speed Steel Drill Bit—Black-oxide high-speed steel drill bits have a longer tool life than carbon steel. They cut with less friction than uncoated drill bits.
    Gold-Oxide High-Speed Steel Drill Bit—Gold-oxide high-speed steel drill bits have a longer tool life than carbon steel.
    Titanium Nitride (TiN)-Coated High-Speed Steel Drill Bit—Titanium nitride (TiN)-coated high-speed steel drill bits have a longer tool life than carbon steel. They last longer and can drill at higher speeds than uncoated and oxide-coated drill bits.
    Uncoated Cobalt Steel Drill Bit—Uncoated cobalt steel drill bits have higher strength and wear resistance than carbon steel and high-speed steel drill bits.
    Uncoated High-Speed Steel Drill Bit—Uncoated high-speed steel drill bits have a longer tool life than carbon steel. They are strong enough for most jobs but don’t last as long as other high-speed steel drill bits. Use them for small-scale jobs.
    No. of
    Pieces
    Chamfer Type
    Tap Sizes
    Included
    Overall Lg.
    Thread
    Type
    No. of
    Flutes
    Pitch Dia.
    Limit
    Drill Bit Sizes
    Included
    Drill Bit Material
    Container
    Type
    Includes
    Each
    Uncoated Carbon Steel Tap
    29Taper, Plug, Bottoming3 each of sizes:
    M3 × 0.50 mm
    M4 × 0.70 mm
    M5 × 0.80 mm
    M6 × 1.00 mm
    M8 × 1.25 mm
    M10 × 1.50 mm
    M12 × 1.75 mm    		1 39/64"
    1 27/32"
    2 1/64"
    2 3/32"
    2 13/64"
    2 3/4"
    2 61/64"    		Metric
    		3, 4H6
    2.5 mm
    3.3 mm
    4.2 mm
    5.0 mm
    6.8 mm
    8.5 mm
    10.2 mm    		Black-Oxide High-Speed SteelMetal CaseTap Wrench00000000000000
     
    Uncoated High-Speed Steel Tap
    18Plug1 each of sizes:
    6-32
    8-32
    10-24
    10-32
    1/4-20
    5/16-18
    3/8-16
    7/16-14
    1/2-13    		2"
    2 1/8"
    2 3/8"
    2 1/2"
    2 23/32"
    2 15/16"
    3 5/32"
    3 3/8"    		UNC, UNF
    		3, 4H327/64"
    5/16"
    36 ga.
    29 ga.
    25 ga.
    21 ga.
    7 ga.
    F
    U    		Uncoated High-Speed SteelMetal Case—0000000000000
    18Plug1 each of sizes:
    6-40
    8-36
    10-24
    10-32
    1/4-28
    5/16-24
    3/8-24
    7/16-20
    1/2-20    		2"
    2 1/8"
    2 3/8"
    2 1/2"
    2 23/32"
    2 15/16"
    3 5/32"
    3 3/8"    		UNC, UNF
    		3, 4H2, H329/64"
    25/64"
    33 ga.
    29 ga.
    25 ga.
    21 ga.
    3 ga.
    I
    Q    		Uncoated High-Speed SteelMetal Case—0000000000000
    18Plug1 each of sizes:
    M2.5 × 0.45 mm
    M3 × 0.50 mm
    M3.5 × 0.60 mm
    M4 × 0.70 mm
    M5 × 0.80 mm
    M6 × 1.00 mm
    M8 × 1.25 mm
    M10 × 1.50 mm
    M12 × 1.75 mm    		1 3/4"
    1 15/16"
    2"
    2 1/8"
    2 3/8"
    2 1/2"
    2 23/32"
    2 15/16"
    3 3/8"    		Metric
    		3, 4D3, D4, D5, D62.05 mm
    2.5 mm
    2.9 mm
    3.3 mm
    4.2 mm
    5.0 mm
    6.7 mm
    8.5 mm
    10.2 mm    		Uncoated High-Speed SteelMetal Case—00000000000000
    29Taper, Plug, Bottoming3 each of sizes:
    M3 × 0.50 mm
    M4 × 0.70 mm
    M5 × 0.80 mm
    M6 × 1.00 mm
    M8 × 1.25 mm
    M10 × 1.50 mm
    M12 × 1.75 mm    		1 39/64"
    1 27/32"
    2 1/64"
    2 3/32"
    2 13/64"
    2 3/4"
    2 61/64"    		Metric
    		3, 4H6
    2.5 mm
    3.3 mm
    4.2 mm
    5.0 mm
    6.8 mm
    8.5 mm
    10.2 mm    		Black-Oxide High-Speed SteelMetal CaseTap Wrench0000000000000
     
    Uncoated Cobalt Steel Tap
    18Plug1 each of sizes:
    6-32
    8-32
    10-24
    10-32
    1/4-20
    5/16-18
    3/8-16
    7/16-14
    1/2-13    		2"
    2 1/8"
    2 3/8"
    2 1/2"
    2 23/32"
    2 15/16"
    3 5/32"
    3 3/8"    		UNC, UNF
    		2, 3H327/64"
    5/16"
    36 ga.
    29 ga.
    25 ga.
    21 ga.
    7 ga.
    F
    U    		Uncoated Cobalt SteelMetal Case—0000000000000
     
    Black-Oxide High-Speed Steel Tap
    18Plug1 each of sizes:
    6-32
    8-32
    10-24
    10-32
    1/4-20
    5/16-18
    3/8-16
    7/16-14
    1/2-13    		2"
    2 1/8"
    2 3/8"
    2 1/2"
    2 23/32"
    2 15/16"
    3 5/32"
    3 3/8"    		UNC, UNF
    		3, 4H327/64"
    5/16"
    36 ga.
    29 ga.
    25 ga.
    21 ga.
    7 ga.
    F
    U    		Black-Oxide High-Speed Steel, Gold-Oxide High-Speed SteelMetal Case—00000000000000
     
    Titanium Nitride (TiN)-Coated High-Speed Steel Tap
    18Plug1 each of sizes:
    6-32
    8-32
    10-24
    10-32
    1/4-20
    5/16-18
    3/8-16
    7/16-14
    1/2-13    		2"
    2 1/8"
    2 3/8"
    2 1/2"
    2 23/32"
    2 15/16"
    3 5/32"
    3 3/8"    		UNC, UNF
    		3, 4H327/64"
    5/16"
    36 ga.
    29 ga.
    25 ga.
    21 ga.
    7 ga.
    F
    U    		Titanium Nitride (TiN)-Coated High-Speed SteelMetal Case—00000000000000
     

    Tap and Drill Bit Cases

    For Taps
    Image of Product. Front orientation. Tap and Drill Bit Stands. Tap and Drill Bit Cases, For Taps.
    These cases close for easy transport and are labeled with sizes for organizing tools. Taps are not included.
    Steel—Steel cases have stands that fold in and out. Stand them up when you need them, then fold them back into the slim case for storage inside a workbench drawer.
    Material
    No. of Taps
    Stored
    Holds Tap Sizes
    Lg.
    Wd.
    Ht.
    Each
    Steel21Three each of Nos. 6, 10
    Three each of 1/4", 5/16", 3/8", 7/16", 1/2"    		6 3/16"4 3/8"1 3/8"0000000000000
     
    For Taps and Drill Bits
    Image of Product. Front orientation. Tap and Drill Bit Stands. Tap and Drill Bit Cases, For Taps and Drill Bits.
    These cases close for easy transport and are labeled with sizes for organizing tools. Taps and drill bits are not included.
    Steel—Steel cases have stands that fold in and out. Stand them up when you need them, then fold them back into the slim case for storage inside a workbench drawer.
    Material
    No. of Taps
    Stored
    Holds Tap Sizes
    No. of Drill
    Bits Stored
    Holds Drill Bit Sizes
    Lg.
    Wd.
    Ht.
    Each
    Steel9One each of Nos. 6-32, 8-32, 10-24, 10-32
    One each of 1/4"-20, 5/16"-18, 3/8"-16, 7/16"-14, 1/2"-13    		9One each of Nos. 36, 29, 25, 21, 7
    One each of 5/16", 27/64"
    One each of F, U    		7"4"1 1/4"0000000000000
    Steel9One each of Nos. 6-40, 8-36, 10-24, 10-32
    One each of 1/4"-28, 5/16"-24, 3/8"-24, 7/16"-20, 1/2"-20    		9One each of Nos. 33, 29, 25, 21, 3
    One each of 25/64", 29/64"
    One each of I, Q    		7"4"1 1/4"000000000000
    Steel9One each of M2.5 × 0.45, M3 × 0.5, M3.5 × 0.6, M4 × 0.7, M5 × 0.8, M6 × 1, M8 × 1.25, M10 × 1.5, M12 × 1.759One each of 2.05, 2.5, 2.9, 3.3, 4.2, 5, 6.7, 8.5, 10.2 mm7"4"1 1/4"000000000000
     

    Tap and Drill Bit Cabinets

    Image of Product. Front orientation. Cabinets. Tap and Drill Bit Cabinets.
    Drawers and labeled compartments provide space for keeping tools organized. Taps and drill bits are not included.
    Holds Tap Sizes
    Holds Drill Bit Sizes
    No. of
    Compartments
    No. of
    Drawers
    Lg.
    Wd.
    Ht.
    Material
    Includes
    Each
    For Taps
    Multiples of 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8", 1"—26314 5/8"7 3/8"7 3/4"Steel—00000000000000
    Multiples of M3, M4, M5, M6, M6.3, M7, M8, M9, M10, M11, M12, M14, M16, M18, M20, M24—29314 5/8"7 3/8"7 3/4"Steel—0000000000000
    Multiples of Nos. 2-56, 3-48, 3-56, 4-40, 4-48, 5-40, 5-44, 6-32, 6-40, 8-32, 8-36, 10-24, 10-32, 12-24, 12-28—60514 5/8"7 3/8"7 3/4"Steel—0000000000000
    Multiples of Nos. 2, 3, 4, 5, 6, 8, 10, 12; Multiples of 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 7/8", 1", 1 1/8", 1 1/4", 1 3/8", 1 1/2"; Multiples of M2.5, M3, M4, M4.5, M5, M6. M6.3, M7, M8, M9, M10, M11, M12, M14, M16, M18, M20, M24, M30—152426"12"12 1/2"SteelLock, Two Keys0000000000000
     
    For Taps and Drill Bits
    Multiples of Nos. 6, 8, 10; Multiples of 1/4", 5/16", 3/8", 7/16", 1/2"Multiples of Nos. 36, 29, 25, 21, 7, 3; Multiples of F, I, U, Q; Multiples of 5/16", 25/64", 27/64", 29/64"29314 5/8"7 3/8"7 3/4"Steel—00000000000000
     
    For Pipe Taps
    Multiples of 1/16, 1/8, 1/4, 3/8, 1/2, 3/4, 1, 1 1/4, 1 1/2, 2 Pipe—21314 5/8"7 3/8"7 3/4"Steel—0000000000000
     
    back to top