Tap Storage | McMaster-Carr

Filter by

For Use With

Material

Length

Number of Compartments

Width

Number of Taps Stored

DFARS Compliance

RoHS Compliance

Height

Number of Drawers

For Drill Bit System of Measurement

Number of Drill Bits

Length Class

Number of Drill Bits Stored

Organizer Type

Drill Bit Size

Holds Drill Bit Sizes

Overall Height

Overall Length

Overall Width

REACH Compliance

Overall Diameter

Forward

How can we improve?

41 Products

Tap and Drill Bit Cabinets

Drawers and labeled compartments provide space for keeping tools organized. Taps and drill bits are not included.

For technical drawings and 3-D models, click on a part number.

For Taps
Holds Tap Sizes	Holds Drill Bit Sizes	No. of Drawers	No. of Compartments	Lg.	Wd.	Ht.	Includes	Material		Each
Multiples of 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8", 1"	__	3	26	14 5/8"	7 3/8"	7 3/4"	__	Steel	0000000	0000000
Multiples of M3, M4, M5, M6, M6.3, M7, M8, M9, M10, M11, M12, M14, M16, M18, M20, M24	__	3	29	14 5/8"	7 3/8"	7 3/4"	__	Steel	0000000	000000
Multiples of Nos. 2-56, 3-48, 3-56, 4-40, 4-48, 5-40, 5-44, 6-32, 6-40, 8-32, 8-36, 10-24, 10-32, 12-24, 12-28	__	5	60	14 5/8"	7 3/8"	7 3/4"	__	Steel	0000000	000000
Multiples of Nos. 2, 3, 4, 5, 6, 8, 10, 12; Multiples of 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 7/8", 1", 1 1/8", 1 1/4", 1 3/8", 1 1/2"; Multiples of M2.5, M3, M4, M4.5, M5, M6. M6.3, M7, M8, M9, M10, M11, M12, M14, M16, M18, M20, M24, M30	__	4	152	26"	12"	12 1/2"	Lock, Two Keys	Steel	0000000	000000
For Taps and Drill Bits
Multiples of Nos. 6, 8, 10; Multiples of 1/4", 5/16", 3/8", 7/16", 1/2"	Multiples of Nos. 36, 29, 25, 21, 7, 3; Multiples of F, I, U, Q; Multiples of 5/16", 25/64", 27/64", 29/64"	3	29	14 5/8"	7 3/8"	7 3/4"	__	Steel	00000000	000000
For Pipe Taps
Multiples of 1/16, 1/8, 1/4, 3/8, 1/2, 3/4, 1, 1 1/4, 1 1/2, 2 Pipe	__	3	21	14 5/8"	7 3/8"	7 3/4"	__	Steel	0000000	000000

Tap and Drill Bit Cases

For Taps

For Taps and Drill Bits

These steel cases close for easy transport and are labeled with sizes for organizing tools. Taps and drill bits are not included.

For Taps
No. of Taps Stored	Holds Tap Sizes	No. of Drill Bits Stored	Holds Drill Bit Sizes	Lg.	Wd.	Ht.	Material		Each
21	Three each of Nos. 6, 10; Three each of 1/4", 5/16", 3/8", 7/16", 1/2"	__	__	6 3/16"	4 3/8"	1 3/8"	Steel	0000000	000000
For Taps and Drill Bits
9	One each of Nos. 6-32, 8-32, 10-24, 10-32; One each of 1/4"-20, 5/16"-18, 3/8"-16, 7/16"-14, 1/2"-13	9	One each of Nos. 36, 29, 25, 21, 7; One each of 5/16", 27/64"; One each of F, U	7"	4"	1 1/4"	Steel	0000000	00000
9	One each of Nos. 6-40, 8-36, 10-24, 10-32; One each of 1/4"-28, 5/16"-24, 3/8"-24, 7/16"-20, 1/2"-20	9	One each of Nos. 33, 29, 25, 21, 3; One each of 25/64", 29/64"; One each of I, Q	7"	4"	1 1/4"	Steel	0000000	00000
9	One each of M2.5 × 0.45, M3 × 0.5, M3.5 × 0.6, M4 × 0.7, M5 × 0.8, M6 × 1, M8 × 1.25, M10 × 1.5, M12 × 1.75	9	One each of 2.05, 2.5, 2.9, 3.3, 4.2, 5, 6.7, 8.5, 10.2 mm	7"	4"	1 1/4"	Steel	0000000	00000

Tap and Drill Bit Stands

Keep taps and drill bits organized. All holes are labeled with sizes. Taps and drill bits are not included.

For Taps and Drill Bits
No. of Taps Stored	Holds Tap Sizes	No. of Drill Bits Stored	Holds Drill Bit Sizes	Lg.	Wd.	Ht.	Material		Each
16	One each of M2, M3; Two each of M4, M5, M6, M8, M10, M12, M14	25	Two each of 3.3 mm, 4.5 mm, 12 mm; One each of 1.8 mm, 2.4 mm, 2.5 mm, 3.4 mm, 4.2 mm, 5 mm, 5.25 mm, 5.5 mm, 6.6 mm, 6.8 mm; 7 mm, 8.5 mm, 8.8 mm, 9 mm, 10.2 mm, 10.8 mm, 12.5 mm, 14 mm, 16 mm	7"	4 1/2"	1 11/16"	Plastic	0000000	000000
26	Two each of Nos. 2, 3, 4, 5, 6, 8, 10, 12; Two each of 1/4", 5/16", 3/8", 7/16", 1/2"	39	Two each of 50 ga., 33 ga., 29 ga.; One each of 47 ga., 45 ga., 44 ga., 43 ga., 42 ga., 39 ga.; 38 ga., 37 ga., 36 ga., 30 ga., 28 ga., 25 ga., 21 ga., 19 ga., 16 ga., 14 ga., 11 ga., 7 ga., 3 ga.; One each of F, I, Q, U; Two of 5/16"; One each of 7/32", 1/4", 3/8", 25/64", 27/64", 7/16", 29/64", 1/2"	7 3/8"	4 11/16"	1 11/16"	Plastic	0000000	00000

Drill Bit Cases

Store and organize drill bits so they stay in good working condition and don't go missing. These cases have individually marked holes for each size in your set.

Steel cases have stands that fold in and out. Stand them up when you need them, then fold them back into the slim case for storage inside a workbench drawer.

Plastic cases have screw-on lids to block out moisture. Compared to steel cases, they're lighter, and they resist rust and dents. Clip them onto your belt to take with you on the job.

For technical drawings and 3-D models, click on a part number.

Steel Cases

Steel

For Drill Bit		Overall
No. of	Size	Lg.	Wd.	Ht.		Each
For Inch Drill Bits
For Jobbers' Length Class
13	1/16"-1/4" (increments of 1/64")	5 3/8"	4"	3/8"	0000000	00000
15	1/16"-1/2" (increments of 1/32")	7"	4"	1 1/4"	0000000	00000
16	1/64"-1/4" (increments of 1/64")	5 3/8"	4"	3/8"	0000000	00000
21	1/16"-3/8" (increments of 1/64")	6"	4"	1 1/8"	0000000	00000
29	1/16"-1/2" (increments of 1/64")	7"	4"	1 3/4"	0000000	00000
For Short Length Class
29	1/16"-1/2" (increments of 1/64")	7"	4"	1 3/4"	0000000	00000
For Extended Length Class—8" Max. Lg.
29	1/16"-1/2" (increments of 1/64")	8 3/4"	4"	1 3/4"	0000000	00000
For Reduced Shank Length Class—1/2" Shank Size
8	9/16"-1" (increments of 1/16")	8 1/2"	6 1/4"	2"	0000000	00000
For Wire Gauge Drill Bits
For Jobbers' Length Class
20	80-61 ga	2"	1 1/2"	1/4"	0000000	0000
60	60-1 ga	4 1/2"	3 1/4"	1"	0000000	00000
For Short Length Class
60	60-1 ga	4 1/2"	3 1/4"	1"	0000000	00000
For Letter Drill Bits
For Jobbers' Length Class
26	A-Z	7"	4"	1 3/4"	0000000	00000
For Short Length Class
26	A-Z	7"	4"	1 3/4"	0000000	00000
For Metric Drill Bits
For Jobbers' Length Class
13	1.0-7.0 mm (increments of 0.5 mm)	5 1/2"	4"	1/2"	0000000	0000
19	1.0-10.0 mm (increments of 0.5 mm)	6"	4"	1 1/8"	0000000	00000
25	1.0-13.0 mm (increments of 0.5 mm)	7"	4"	1 3/4"	0000000	00000
41	6.0-10.0 mm (increments of 0.1 mm)	7 1/8"	4 1/2"	2 1/2"	0000000	00000
50	1.0-5.9 mm (increments of 0.1 mm)	4 1/2"	3 1/4"	1"	0000000	00000
For Inch, Wire Gauge, Letter Drill Bits
For Jobbers' Length Class
19	1/16", 1/2", 1/4", 1/8", 21 ga, 25 ga, 27/64", 29 ga, 3/16", 3/32", 3/8", 5/16", 5/32", 5/64", 7 ga, 7/16", 7/32", F, U	7"	4"	1 1/4"	0000000	00000
115	1/16"-1/2" (increments of 1/64"), 60-1 ga, A-Z	13 1/2"	4 5/8"	2 1/4"	0000000	00000
135	1/16"-1/2" (increments of 1/64"), 80-1 ga, A-Z	13 1/2"	4 5/8"	2 1/4"	0000000	00000
For Short Length Class
115	1/16"-1/2" (increments of 1/64"), 60-1 ga, A-Z	4 5/8"	13 1/2"	2 1/4"	0000000	00000
For Inch, Wire Gauge, Metric Drill Bits
For Jobbers' Length Class
134	1.0-13.0 mm (increments of 0.5 mm), 1/16"-1/2" (increments of 1/64"), 80-1 ga	13 1/2"	4 5/8"	2 1/4"	0000000	00000

Plastic Cases

Plastic

For Drill Bit		Overall
No. of	Size	Dia.	Ht.	Features		Each
For Inch Drill Bits
For Jobbers' Length Class
29	1/16"-1/2" (increments of 1/64")	3"	6 5/8"	Belt Clip	0000000	000000
For Maintenance Length Class
29	1/16"-1/2" (increments of 1/64")	3 3/4"	6 1/2"	Belt Clip	0000000	00000

Drill Bit Stands

These stands hold one of each bit size. Each hole is marked with the size.

For Drill Bit			Overall
No. of	Size	Lg. Class	Lg.	Wd.	Ht.	Material		Each
For Inch Drill Bits
29	1/16"-1/2" (increments of 1/64")	Jobbers' Length, Short Length, Extended Length	5 5/8"	2 5/8"	1 1/2"	Steel	0000000	000000
33	1/2"-1" (increments of 1/64")	Jobbers' Length, Short Length, Extended Length	13"	5"	2 3/4"	Steel	0000000	00000
For Letter Drill Bits
26	A-Z	Jobbers' Length, Short Length, Extended Length	5 5/8"	2 5/8"	1 1/2"	Steel	0000000	00000

Reduced-Shank Drill Bit Stands

Each hole is sized to hold the 1/2" shank of a reduced-shank drill bit and marked with a bit size.

For Drill Bit			Overall
No. of	Size	Shank Size	Lg.	Wd.	Ht.	Material		Each
For Inch Drill Bits
33	1/2"-1" (increments of 1/64")	1/2"	13"	5"	2 3/4"	Steel	0000000	000000