Low-Outgassing Tape | McMaster-Carr

ASTM E595—Tape that meets ASTM E595, a standard set by NASA, will produce almost no volatile emissions, even in a high vacuum. It's a great choice for use around your most sensitive electronics.

								108 ft. Long
	Wd.	Overall Thk.	Temp. Range, ° F	Voltage Rating, V	Dielectric Strength, V/mil	Specs. Met	Color		Each
Acrylic Plastic Adhesive







				Kapton® Polyimide

				1/4"	0.0025"	-20 to 350	7,000	2,800	ASTM E595	Amber	7648A61	000000


				3/8"	0.0025"	-20 to 350	7,000	2,800	ASTM E595	Amber	7648A62	00000
				1/2"	0.0025"	-20 to 350	7,000	2,800	ASTM E595	Amber	7648A63	00000
				3/4"	0.0025"	-20 to 350	7,000	2,800	ASTM E595	Amber	7648A64	00000
				1"	0.0025"	-20 to 350	7,000	2,800	ASTM E595	Amber	7648A65	00000
				2"	0.0025"	-20 to 350	7,000	2,800	ASTM E595	Amber	7648A66	000000
				6"	0.0025"	-20 to 350	7,000	2,800	ASTM E595	Amber	7648A69	000000

High-Strength Fiberglass Electrical Tape

Made with fiberglass for durability and abrasion resistance, this electrical insulating tape also withstands high temperatures. The cloth can absorb electrical insulating varnishes.

Acrylic Adhesive—Long lasting and solvent resistant. The adhesive won’t degrade when exposed to chemicals, oil, or prolonged UV light. Unlike rubber adhesive, it leaves behind little residue when removed.

ASTM E595—Tape that meets ASTM E595, a standard set by NASA, will produce almost no volatile emissions that could damage electronics, even in a high vacuum.

	Lg., ft.	Overall Thk.	Temp. Range, ° F	Dielectric Strength	Voltage Rating	Specs. Met	Mil. Spec.	Color		Each
Acrylic Adhesive



	1/4"	54	0.007"	-20 to 350	Not Rated	Not Rated	ASTM E595, UL 510	Fed. Spec. A-A-59770	White	7574A36	000000


	1/2"	54	0.007"	-20 to 350	Not Rated	Not Rated	ASTM E595, UL 510	Fed. Spec. A-A-59770	White	7574A24	00000
	3/4"	54	0.007"	-20 to 350	Not Rated	Not Rated	ASTM E595, UL 510	Fed. Spec. A-A-59770	White	7574A33	00000
	1"	54	0.007"	-20 to 350	Not Rated	Not Rated	ASTM E595, UL 510	Fed. Spec. A-A-59770	White	7574A25	00000
	1 1/2"	54	0.007"	-20 to 350	Not Rated	Not Rated	ASTM E595, UL 510	Fed. Spec. A-A-59770	White	7574A34	00000
	2"	54	0.007"	-20 to 350	Not Rated	Not Rated	ASTM E595, UL 510	Fed. Spec. A-A-59770	White	7574A26	00000

Low-Outgassing Mounting Tape

Tested to meet ASTM E595, a standard used by NASA, this tape can mount sensitive electronics while releasing almost no volatile emissions that could damage them, even in a vacuum. Use it where temperatures fluctuate—its polyester backing keeps it from shrinking or stretching. And thanks to its acrylic adhesive, neither heat nor chemicals will cause it to peel off.

	Lg., yd.	Overall Thk.	Material	Adhesive Location	Adhesive Material	Temp. Range, ° F	Adhesion to Steel, ozf/in. wd.	Specs. Met	Color		Each
3M 9495MP



	1"	60	0.0057"	Polyester Plastic	Both Sides	Acrylic Plastic	-40 to 250	16	ASTM E595	Clear	9086N11	000000

Low-Outgassing Sealing Tape

Protect sensitive electronics. Tested to NASA's ASTM E595 standards, this tape seals gaps while releasing almost no vapors, even in the vacuum of space. With Tedlar backing, it also stands up to chemicals and wear over time.

Wd.	Lg., ft.	Overall Thk.	Adhesive Material	Temp. Range, ° F	Tensile Strength, lbf/in. wd.	Specs. Met	Color		Each
1"	216	0.004"	Acrylic Plastic	-100 to 225	24	ASTM E595	White	9053N11	0000000

Glue-on-a-Roll

Apply this glue-like tape for a no-mess alternative to liquid adhesives, hot melts, and staples. Also known as adhesive transfer tape, these rolls have a thin film of pressure-sensitive glue on a peel-away liner. They are thinner and more conformable than tape with adhesive on both sides.

Model Number 467MP—467MP and 468MP resist solvents and UV rays.

ASTM E595—Rolls that meet ASTM E595, a standard set by NASA, will produce almost no volatile emissions, even in a high vacuum.

					Temp.
	Mfr. Model No.	Wd.	Lg., yd.	Thk.	Min.	Max., ° F	Color	Specs. Met	For Joining		Each
3M Glue-on-a-Roll



		467MP	1/2"	60	0.002"	Not Rated	300	Clear	ASTM E595	Metal, Plastic, Rubber	7628A65	000000


		467MP	3/4"	60	0.002"	Not Rated	300	Clear	ASTM E595	Metal, Plastic, Rubber	7628A66	00000
		467MP	1"	60	0.002"	Not Rated	300	Clear	ASTM E595	Metal, Plastic, Rubber	7628A64	00000
		467MP	2"	60	0.002"	Not Rated	300	Clear	ASTM E595	Metal, Plastic, Rubber	7628A101	00000
		467MP	3"	60	0.002"	Not Rated	300	Clear	ASTM E595	Metal, Plastic, Rubber	7628A102	00000

Low-Outgassing Copper Foil Conductive Tape

Tested to meet ASTM E595, a standard used by NASA, this tape releases almost no volatile emissions that could damage sensitive electronics, even in a vacuum. Use it to repair and prototype circuit boards and shield components from EMI/RFI. With a copper backing and conductive adhesive, it’s useful for making electrical connections—current travels both along and through the tape. Unlike aluminum tape, it can be soldered. It’s also better at resisting chemicals.

					Temp.					1/2" Wide		1" Wide
Manufacturer Model Number	Lg., ft.	Overall Thk.	Material	Adhesive Material	Min.	Max.	Voltage Rating, V	Specs. Met	Color		Each		Each
3M 1181	54	0.0026"	Copper	Acrylic Plastic	Not Rated	Not Rated	600	ASTM E595	Copper	9108N11	000000	9108N12	0000000

High-Strength Glue-on-a-Roll

The 3M VHB adhesive on these rolls offers a strong hold that can replace rivets, spot welds, and other permanent fasteners. Also known as adhesive transfer tape, these rolls have a thin film of pressure-sensitive glue on a peel-away liner. They’re more conformable than tape with adhesive on both sides.

Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.

					Temp., ° F
	Mfr. Model No.	Wd.	Lg., yd.	Thk.	Min.	Max.	Color	For Joining		Each
3M Glue-on-a-Roll



		F9460PC	1/2"	60	0.002"	-40	300	Clear	Ceramic, Composite, Glass, Metal	7628A52	000000


		F9460PC	3/4"	60	0.002"	-40	300	Clear	Ceramic, Composite, Glass, Metal	7628A75	00000
		F9460PC	1"	60	0.002"	-40	300	Clear	Ceramic, Composite, Glass, Metal	7628A76	00000
		F9460PC	1 1/4"	180	0.002"	-40	300	Clear	Ceramic, Composite, Glass, Metal	7628A28	000000

Heat-Transfer Mounting Tape

Use this tape to attach components to heat sinks and metal chassis walls in place of screws and other mechanical fasteners. It conducts heat away from sensitive electronics.

Aluminum Foil—Aluminum foil tape conducts electricity. It also meets ASTM E595, a standard used by NASA, which means it produces almost no volatile emissions that could damage sensitive electronics, even in a high vacuum.

	Lg., ft.	Overall Thk.	Adhesive Location	Adhesive Material	Temp. Range, ° F	Voltage Rating	Thermal Conductivity, W/(m⋅°C)	Specs. Met	Color		Each
Aluminum Foil



	1/2"	3	0.009"	Both Sides	Acrylic Plastic	-20 to 255	Not Rated	1.4	ASTM E595	Gray	6838A101	000000


	1/2"	12	0.009"	Both Sides	Acrylic Plastic	-20 to 255	Not Rated	1.4	ASTM E595	Gray	6838A102	000000
	1"	3	0.009"	Both Sides	Acrylic Plastic	-20 to 255	Not Rated	1.4	ASTM E595	Gray	6838A31	00000
	1"	12	0.009"	Both Sides	Acrylic Plastic	-20 to 255	Not Rated	1.4	ASTM E595	Gray	6838A11	000000
	2"	3	0.009"	Both Sides	Acrylic Plastic	-20 to 255	Not Rated	1.4	ASTM E595	Gray	6838A32	000000
	2"	12	0.009"	Both Sides	Acrylic Plastic	-20 to 255	Not Rated	1.4	ASTM E595	Gray	6838A12	000000

High-Shear Static-Control Sealing Tape

The acrylic adhesive on this tape is so sticky that it won’t slide around even when cut. Backed with a metalized polyester, this tape minimizes the buildup and discharge of static electricity, so you can apply it to electronic parts. Tested to meet ASTM E595, a standard used by NASA, it gives off almost no volatile emissions that could damage sensitive electronics and optics, even in a vacuum. It’s often used in prototyping to temporarily join two parts that you’ll want to separate later. It removes cleanly from your parts, even after heat exposure.

							Temp., ° F
	Wd.	Lg., ft.	Overall Thk.	Material	Adhesive Location	Adhesive Material	Min.	Max.	Tensile Strength, lbf/in. wd.	Adhesion to Steel, ozf/in. wd.	Voltage Rating	Color	Specs. Met	Spool Material	Spool ID		Each
8439



		1"	30	0.002"	Metalized Polyester Plastic	One Side	Acrylic Plastic	-60	300	29	44	Not Rated	Silver	ASTM E595	Plastic	3"	9266N111	000000

Low-Outgassing Aluminum Foil Conductive Tape

Tested to meet ASTM E595, a standard used by NASA, this tape gives off almost no volatile emissions that could damage sensitive electronics, even in a vacuum. It’s more conformable than copper tape, so you can cover textured housings and round cables without leaving gaps for electromagnetic interference (EMI) to get in. When EMI makes contact, the conductive backing and adhesive convert it into heat and actively reflect it away. The conductivity of this tape also makes it great for electrical connections. Use it on surfaces that can’t be soldered.

					Temp., ° F					1/2" Wide		1" Wide
Manufacturer Model Number	Lg., ft.	Overall Thk.	Material	Adhesive Material	Min.	Max.	Voltage Rating, V	Specs. Met	Color		Each		Each
3M 1170	54	0.003"	Aluminum	Acrylic Plastic	-40	265	600	ASTM E595	Silver	9182N11	000000	9182N12	0000000

Insulating Adhesives for Electronics

Secure hardware on circuit boards while insulating current.

Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.

Plastic

Plastic adhesives create an instant bond, so they’re the best choice for automated assembly lines. The bond is weaker than that of epoxy and cyanoacrylate adhesives, but it’s sufficient for attaching heat sinks. Since they remain tacky, you can detach and reposition parts.

ASTM E595—Adhesives that meet ASTM E595, a standard used by NASA, release almost no volatile emissions that could damage sensitive electronics, even in a vacuum.

						Temp., ° F
	Lg.	Wd.	Thk.	Thermal Conductivity, W/(m⋅°C)	Consistency	Min.	Max.	Color	Clarity	Specs. Met	For Joining		Each
Adhesive



		6"	6"	0.004"	1.7	Film	-85	300	White	Opaque	ASTM E595	Metal	74755A117	000000


		6"	6"	0.006"	1.7	Film	-85	300	White	Opaque	ASTM E595	Metal	74755A118	00000

Brady M6/M7 Label Printer Tape

Create labels with your Brady M6 or M7 printer. Pair this tape with a printer ink ribbon in the same series as your printer.

Pre-Cut Tape for M7 Series Printers

Polyester Plastic—Polyester tape holds up the best to dirt, oil, and cleaning.

Low Outgassing—Low-outgassing adhesive produces almost no volatile emissions, even in high-vacuum settings. It meets ASTM E595, which is a standard developed by NASA for products used in highly controlled environments. Tape with this adhesive must be paired with M7-R6000 ink ribbons to maintain the standard.

Aggressive Adhesion—Aggressive adhesive sticks to nearly any surface, including concrete and other porous materials. It holds up in oily, dirty, or damp areas, and it stays put even with heavy use or regular cleaning. However, it’s more difficult to remove from surfaces than standard adhesives.

	Tape											Printer Ink Ribbons for M7 Series Printers
	Wd.	Lg.	Color	Mfr. Model No.	Thk.	Roll Lg., ft.	No. of Labels per Roll	Temp. Range, ° F	Specs. Met		Each		Each
Polyester Plastic with Aggressive Adhesion, Low-Outgassing Adhesive Back



		15/16"	1/4"	White	M7-13-423	0.003"	23	750	-90 to 230	ASTM E595	2168N129	000000	2184N13	000000


		1"	3/8"	White	M7-16-423	0.003"	21	500	-90 to 230	ASTM E595	2168N131	00000	2184N13	00000
		1"	1/2"	White	M7-17-423	0.003"	26	500	-90 to 230	ASTM E595	2168N132	00000	2184N13	00000
		1 1/2"	1"	White	M7-31-423	0.003"	23	250	-90 to 230	ASTM E595	2168N133	00000	2184N13	00000

Brady Label Printer Tape for Wire and Cable

Make labels for wire and cable with your Brady M-series printer.

Pre-Cut Heat-Shrink Tubing

Slide heat-shrink tubing tape over the cut end of a wire or cable, then apply heat for a snug fit.

For M7 Series Printers—Tape for M6 and M7 printers requires a compatible printer ink ribbon.

Low Outgassing—Low outgassing tape produces almost no volatile emissions, even in high-vacuum settings. It meets ASTM E595, which is an outgassing standard developed by NASA for products used in highly controlled environments.

Tape Adapters—To use M6 tape in an M7 printer, you'll need a tape adapter.

	Tape														Printer Ink Ribbons for M6 Series Printers		Printer Ink Ribbons for M7 Series Printers		Tape Adapters
				For Wire
	Wd.	Lg.	Color	Ga.	OD	Mfr. Model No.	Thk.	Roll Lg., ft.	No. of Labels per Roll	Mount Type	Temp. Range, ° F	Specs. Met		Each		Each		Each		Each
For Brady M6 and M7 Series Printers







				PVDF—Low Outgassing

				1"	1/8"	White	26 to 18	0.03" to 0.08"	M6-094-1-345-WT	0.016"	4	100	Wraparound	-65 to 435	ASTM E595	5317N69	0000000	9117N122	000000	2184N13	000000	2168N128	00000


				1"	1/4"	White	20 to 16	0.06" to 0.11"	M6-125-1-345-WT	0.016"	6	100	Wraparound	-65 to 435	ASTM E595	5317N71	000000	9117N122	00000	2184N13	00000	2168N128	0000
				1"	3/8"	White	16 to 10	0.09" to 0.15"	M6-187-1-345-WT	0.016"	6	100	Wraparound	-65 to 435	ASTM E595	5317N72	000000	9117N122	00000	2184N13	00000	2168N128	0000
				1"	1/2"	White	12 to 8	0.12" to 0.21"	M6-250-1-345-WT	0.016"	7	100	Wraparound	-65 to 435	ASTM E595	5317N73	000000	9117N122	00000	2184N13	00000	2168N128	0000
				1"	5/8"	White	8 to 4	0.19" to 0.32"	M6-375-1-345-WT	0.016"	8	100	Wraparound	-65 to 435	ASTM E595	5317N74	000000	9117N122	00000	2184N13	00000	2168N128	0000
				1"	7/8"	White	6 to 1	0.25" to 0.45"	M6-500-1-345-WT	0.016"	10	100	Wraparound	-65 to 435	ASTM E595	5317N75	000000	9117N122	00000	2184N13	00000	2168N128	0000