McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    450 Products

    Pull-Out Dowel Pins

    Remove pins even when you only have access to one end or they sit flush with the surface of your part. With one internally threaded end, they are easier to remove than most dowel pins. Thread a screw into the pin and then pull with the removal tool (sold separately). You can also pull the screw with pliers, but there’s more risk of damaging the hole.
    Steel
    Image of Product. Front orientation. Dowel Pins. Standard Tolerance, Tapped Head, Pull-Out Removal.
    High-Strength Alloy Steel—Our strongest, most wear-resistant pins, these won't bend or break from vibration. Use them for high-stress applications, such as mounting and aligning hydraulic cylinders and injection molds. They perform best in dry environments since moisture will cause them to rust.
    High-Strength Black-Oxide Alloy Steel—With a matte black appearance, these pins combine a finished look with the superior strength and wear resistance of alloy steel. They offer minimal corrosion resistance, so they're best for dry environments.
    Spring Steel—These pins won't deform from stress and vibration. They're stronger than stainless steel but not quite as strong as alloy steel. Pins perform best in dry environments since moisture will cause them to rust.
    Each
    Lg.
    Dia. Tolerance
    Thread Size
    Double Shear Breaking
    Strength
    Min.
    Hardness
    Specs. Met
    Certificate Type
    1-49
    50-199
    200-Up
    High-Strength Alloy Steel
     
    1/4" Diameter
    1/2"0.0001" to 0.0003"8-32
    		6,400 lbfRockwell C47ASME B18.8.2—97175A309000000000000000
    3/4"0.0001" to 0.0003"8-32
    		6,400 lbfRockwell C47ASME B18.8.2—97175A311000000000000
    1"0.0001" to 0.0003"8-32
    		6,400 lbfRockwell C47ASME B18.8.2—97175A315000000000000
    1 1/4"0.0001" to 0.0003"8-32
    		6,400 lbfRockwell C47ASME B18.8.2Material Certificate
    		97175A316000000000000
    1 1/2"0.0001" to 0.0003"8-32
    		6,400 lbfRockwell C47ASME B18.8.2—97175A318000000000000
    1 3/4"0.0001" to 0.0003"8-32
    		6,400 lbfRockwell C47ASME B18.8.2—97175A319000000000000
    2"0.0001" to 0.0003"8-32
    		6,400 lbfRockwell C47ASME B18.8.2—97175A321000000000000
    2 1/2"0.0001" to 0.0003"8-32
    		6,400 lbfRockwell C47ASME B18.8.2—97175A325000000000000
     
    5/16" Diameter
    3/4"0.0001" to 0.0003"10-32
    		10,000 lbfRockwell C47ASME B18.8.2—97175A329000000000000
    1"0.0001" to 0.0003"10-32
    		10,000 lbfRockwell C47ASME B18.8.2—97175A332000000000000
    1 1/4"0.0001" to 0.0003"10-32
    		10,000 lbfRockwell C47ASME B18.8.2—97175A334000000000000
    1 1/2"0.0001" to 0.0003"10-32
    		10,000 lbfRockwell C47ASME B18.8.2—97175A336000000000000
    2"0.0001" to 0.0003"10-32
    		10,000 lbfRockwell C47ASME B18.8.2—97175A390000000000000
    2 1/4"0.0001" to 0.0003"10-32
    		10,000 lbfRockwell C47ASME B18.8.2—97175A338000000000000
    2 1/2"0.0001" to 0.0003"10-32
    		10,000 lbfRockwell C47ASME B18.8.2—97175A341000000000000
     
    3/8" Diameter
    3/4"0.0001" to 0.0003"10-32
    		14,300 lbfRockwell C47ASME B18.8.2—97175A344000000000000
    1"0.0001" to 0.0003"10-32
    		14,300 lbfRockwell C47ASME B18.8.2—97175A348000000000000
    1 1/4"0.0001" to 0.0003"10-32
    		14,300 lbfRockwell C47ASME B18.8.2—97175A349000000000000
    1 1/2"0.0001" to 0.0003"10-32
    		14,300 lbfRockwell C47ASME B18.8.2—97175A352000000000000
    1 3/4"0.0001" to 0.0003"10-32
    		14,300 lbfRockwell C47ASME B18.8.2—97175A353000000000000
    2"0.0001" to 0.0003"10-32
    		14,300 lbfRockwell C47ASME B18.8.2—97175A355000000000000
    2 1/4"0.0001" to 0.0003"10-32
    		14,300 lbfRockwell C47ASME B18.8.2—97175A357000000000000
    2 1/2"0.0001" to 0.0003"10-32
    		14,300 lbfRockwell C47ASME B18.8.2—97175A358000000000000
    3"0.0001" to 0.0003"10-32
    		14,300 lbfRockwell C47ASME B18.8.2—97175A364000000000000
     
    7/16" Diameter
    1"0.0001" to 0.0003"1/4"-20
    		19,500 lbfRockwell C47ASME B18.8.2—97175A366000000000000
    1 1/2"0.0001" to 0.0003"1/4"-20
    		19,500 lbfRockwell C47ASME B18.8.2—97175A369000000000000
    2"0.0001" to 0.0003"1/4"-20
    		19,500 lbfRockwell C47ASME B18.8.2—97175A374000000000000
     
    1/2" Diameter
    3/4"0.0001" to 0.0003"1/4"-20
    		25,500 lbfRockwell C47ASME B18.8.2—97175A376000000000000
    1"0.0001" to 0.0003"1/4"-20
    		25,500 lbfRockwell C47ASME B18.8.2—97175A377000000000000
    1 1/4"0.0001" to 0.0003"1/4"-20
    		25,500 lbfRockwell C47ASME B18.8.2—97175A378000000000000
    1 1/2"0.0001" to 0.0003"1/4"-20
    		25,500 lbfRockwell C47ASME B18.8.2—97175A379000000000000
    1 3/4"0.0001" to 0.0003"1/4"-20
    		25,500 lbfRockwell C47ASME B18.8.2—97175A381000000000000
    2"0.0001" to 0.0003"1/4"-20
    		25,500 lbfRockwell C47ASME B18.8.2—97175A383000000000000
    2 1/4"0.0001" to 0.0003"1/4"-20
    		25,500 lbfRockwell C47ASME B18.8.2—97175A385000000000000
    2 1/2"0.0001" to 0.0003"1/4"-20
    		25,500 lbfRockwell C47ASME B18.8.2—97175A391000000000000
    3"0.0001" to 0.0003"1/4"-20
    		25,500 lbfRockwell C47ASME B18.8.2—97175A395000000000000
    3 1/2"0.0001" to 0.0003"1/4"-20
    		25,500 lbfRockwell C47ASME B18.8.2—97175A397000000000000
    4"0.0001" to 0.0003"1/4"-20
    		25,500 lbfRockwell C47ASME B18.8.2—97175A399000000000000
     
    5/8" Diameter
    1 1/4"0.0001" to 0.0003"1/4"-20
    		39,000 lbfRockwell C47ASME B18.8.2—97175A410000000000000
    1 1/2"0.0001" to 0.0003"1/4"-20
    		39,000 lbfRockwell C47ASME B18.8.2—97175A411000000000000
    2"0.0001" to 0.0003"1/4"-20
    		39,000 lbfRockwell C47ASME B18.8.2—97175A413000000000000
    2 1/4"0.0001" to 0.0003"1/4"-20
    		39,000 lbfRockwell C47ASME B18.8.2—97175A414000000000000
    2 1/2"0.0001" to 0.0003"1/4"-20
    		39,000 lbfRockwell C47ASME B18.8.2—97175A415000000000000
    3"0.0001" to 0.0003"1/4"-20
    		39,000 lbfRockwell C47ASME B18.8.2—97175A417000000000000
    4"0.0001" to 0.0003"1/4"-20
    		39,000 lbfRockwell C47ASME B18.8.2—97175A421000000000000
     
    3/4" Diameter
    1 1/2"0.0001" to 0.0003"5/16"-18
    		57,000 lbfRockwell C47ASME B18.8.2—97175A426000000000000
    2"0.0001" to 0.0003"5/16"-18
    		57,000 lbfRockwell C47ASME B18.8.2—97175A431000000000000
    2 1/2"0.0001" to 0.0003"5/16"-18
    		57,000 lbfRockwell C47ASME B18.8.2—97175A435000000000000
    3"0.0001" to 0.0003"5/16"-18
    		57,000 lbfRockwell C47ASME B18.8.2—97175A439000000000000
    4"0.0001" to 0.0003"5/16"-18
    		57,000 lbfRockwell C47ASME B18.8.2—97175A440000000000000
     
    1" Diameter
    2"0.0001" to 0.0003"5/16"-18
    		102,000 lbfRockwell C47ASME B18.8.2—97175A443000000000000
    2 1/2"0.0001" to 0.0003"5/16"-18
    		102,000 lbfRockwell C47ASME B18.8.2Material Certificate
    		97175A446000000000000
    3"0.0001" to 0.0003"5/16"-18
    		102,000 lbfRockwell C47ASME B18.8.2—97175A4490000000000000
    4"0.0001" to 0.0003"5/16"-18
    		102,000 lbfRockwell C47ASME B18.8.2—97175A4530000000000000
     
    16 mm Diameter
    32 mm0.007 mm to 0.018 mmM8 × 1.25 mm33,500 lbfRockwell C52DIN 7979D-m6—97355A563000000000000
    36 mm0.007 mm to 0.018 mmM8 × 1.25 mm33,500 lbfRockwell C52DIN 7979D-m6—97355A567000000000000
    40 mm0.007 mm to 0.018 mmM8 × 1.25 mm33,500 lbfRockwell C52DIN 7979D-m6—97355A571000000000000
    50 mm0.007 mm to 0.018 mmM8 × 1.25 mm33,500 lbfRockwell C52DIN 7979D-m6—97355A579000000000000
    60 mm0.007 mm to 0.018 mmM8 × 1.25 mm33,500 lbfRockwell C52DIN 7979D-m6—97355A587000000000000
    70 mm0.007 mm to 0.018 mmM8 × 1.25 mm33,500 lbfRockwell C52DIN 7979D-m6—97355A591000000000000
     
    20 mm Diameter
    50 mm0.008 mm to 0.021 mmM10 × 1.5 mm51,500 lbfRockwell C52DIN 7979D-m6—97355A605000000000000
    60 mm0.008 mm to 0.021 mmM10 × 1.5 mm51,500 lbfRockwell C52DIN 7979D-m6—97355A609000000000000
    80 mm0.008 mm to 0.021 mmM10 × 1.5 mm51,500 lbfRockwell C52DIN 7979D-m6—97355A613000000000000
     
    High-Strength Black-Oxide Alloy Steel
     
    1/4" Diameter
    1/2"0.0001" to 0.0003"8-32
    		Not RatedRockwell C60ASME B18.8.2—97175A711000000000000
    3/4"0.0001" to 0.0003"8-32
    		Not RatedRockwell C60ASME B18.8.2—97175A712000000000000
    1"0.0001" to 0.0003"8-32
    		Not RatedRockwell C60ASME B18.8.2—97175A713000000000000
    1 1/4"0.0001" to 0.0003"8-32
    		Not RatedRockwell C60ASME B18.8.2—97175A714000000000000
    1 1/2"0.0001" to 0.0003"8-32
    		Not RatedRockwell C60ASME B18.8.2—97175A715000000000000
    2"0.0001" to 0.0003"8-32
    		Not RatedRockwell C60ASME B18.8.2—97175A716000000000000
     
    5/16" Diameter
    3/4"0.0001" to 0.0003"10-32
    		Not RatedRockwell C60ASME B18.8.2—97175A717000000000000
    1"0.0001" to 0.0003"10-32
    		Not RatedRockwell C60ASME B18.8.2—97175A718000000000000
    1 1/4"0.0001" to 0.0003"10-32
    		Not RatedRockwell C60ASME B18.8.2—97175A719000000000000
    1 1/2"0.0001" to 0.0003"10-32
    		Not RatedRockwell C60ASME B18.8.2—97175A721000000000000
    2"0.0001" to 0.0003"10-32
    		Not RatedRockwell C60ASME B18.8.2—97175A722000000000000
     
    3/8" Diameter
    3/4"0.0001" to 0.0003"10-32
    		Not RatedRockwell C60ASME B18.8.2—97175A723000000000000
    1"0.0001" to 0.0003"10-32
    		Not RatedRockwell C60ASME B18.8.2—97175A724000000000000
    1 1/4"0.0001" to 0.0003"10-32
    		Not RatedRockwell C60ASME B18.8.2—97175A725000000000000
    1 1/2"0.0001" to 0.0003"10-32
    		Not RatedRockwell C60ASME B18.8.2—97175A726000000000000
    2"0.0001" to 0.0003"10-32
    		Not RatedRockwell C60ASME B18.8.2—97175A727000000000000
     
    1/2" Diameter
    1"0.0001" to 0.0003"1/4"-20
    		Not RatedRockwell C60ASME B18.8.2—97175A728000000000000
    1 1/2"0.0001" to 0.0003"1/4"-20
    		Not RatedRockwell C60ASME B18.8.2—97175A729000000000000
    2"0.0001" to 0.0003"1/4"-20
    		Not RatedRockwell C60ASME B18.8.2—97175A731000000000000
    2 1/2"0.0001" to 0.0003"1/4"-20
    		Not RatedRockwell C60ASME B18.8.2—97175A732000000000000
     
    5/8" Diameter
    2"0.0001" to 0.0003"1/4"-20
    		Not RatedRockwell C60ASME B18.8.2—97175A733000000000000
     
    Spring Steel
     
    6 mm Diameter
    16 mm0.004 mm to 0.012 mmM4 × 0.7 mm6,600 lbfRockwell C52DIN 7979D-m6—97355A292000000000000
    18 mm0.004 mm to 0.012 mmM4 × 0.7 mm6,600 lbfRockwell C52DIN 7979D-m6—97355A296000000000000
    20 mm0.004 mm to 0.012 mmM4 × 0.7 mm6,600 lbfRockwell C52DIN 7979D-m6—97355A300000000000000
    24 mm0.004 mm to 0.012 mmM4 × 0.7 mm6,600 lbfRockwell C52DIN 7979D-m6—97355A302000000000000
    28 mm0.004 mm to 0.012 mmM4 × 0.7 mm6,600 lbfRockwell C52DIN 7979D-m6—97355A303000000000000
    30 mm0.004 mm to 0.012 mmM4 × 0.7 mm6,600 lbfRockwell C52DIN 7979D-m6—97355A306000000000000
    32 mm0.004 mm to 0.012 mmM4 × 0.7 mm6,600 lbfRockwell C52DIN 7979D-m6—97355A310000000000000
    36 mm0.004 mm to 0.012 mmM4 × 0.7 mm6,600 lbfRockwell C52DIN 7979D-m6—97355A314000000000000
    40 mm0.004 mm to 0.012 mmM4 × 0.7 mm6,600 lbfRockwell C52DIN 7979D-m6—97355A318000000000000
    50 mm0.004 mm to 0.012 mmM4 × 0.7 mm6,600 lbfRockwell C52DIN 7979D-m6—97355A326000000000000
    60 mm0.004 mm to 0.012 mmM4 × 0.7 mm6,600 lbfRockwell C52DIN 7979D-m6—97355A334000000000000
     
    8 mm Diameter
    20 mm0.006 mm to 0.015 mmM5 × 0.8 mm10,400 lbfRockwell C52DIN 7979D-m6—97355A401000000000000
    24 mm0.006 mm to 0.015 mmM5 × 0.8 mm10,400 lbfRockwell C52DIN 7979D-m6—97355A405000000000000
    28 mm0.006 mm to 0.015 mmM5 × 0.8 mm10,400 lbfRockwell C52DIN 7979D-m6—97355A414000000000000
    30 mm0.006 mm to 0.015 mmM5 × 0.8 mm10,400 lbfRockwell C52DIN 7979D-m6—97355A418000000000000
    32 mm0.006 mm to 0.015 mmM5 × 0.8 mm10,400 lbfRockwell C52DIN 7979D-m6—97355A404000000000000
    36 mm0.006 mm to 0.015 mmM5 × 0.8 mm10,400 lbfRockwell C52DIN 7979D-m6—97355A422000000000000
    40 mm0.006 mm to 0.015 mmM5 × 0.8 mm10,400 lbfRockwell C52DIN 7979D-m6—97355A406000000000000
    50 mm0.006 mm to 0.015 mmM5 × 0.8 mm10,400 lbfRockwell C52DIN 7979D-m6—97355A426000000000000
    60 mm0.006 mm to 0.015 mmM5 × 0.8 mm10,400 lbfRockwell C52DIN 7979D-m6—97355A430000000000000
    70 mm0.006 mm to 0.015 mmM5 × 0.8 mm10,400 lbfRockwell C52DIN 7979D-m6—97355A434000000000000
    80 mm0.006 mm to 0.015 mmM5 × 0.8 mm10,400 lbfRockwell C52DIN 7979D-m6—97355A439000000000000
     
    10 mm Diameter
    24 mm0.006 mm to 0.015 mmM6 × 1 mmNot RatedRockwell C52DIN 7979D-m6—97355A492000000000000
    28 mm0.006 mm to 0.015 mmM6 × 1 mmNot RatedRockwell C52DIN 7979D-m6—97355A496000000000000
    30 mm0.006 mm to 0.015 mmM6 × 1 mmNot RatedRockwell C52DIN 7979D-m6—97355A500000000000000
    32 mm0.006 mm to 0.015 mmM6 × 1 mmNot RatedRockwell C52DIN 7979D-m6—97355A504000000000000
    36 mm0.006 mm to 0.015 mmM6 × 1 mmNot RatedRockwell C52DIN 7979D-m6—97355A505000000000000
    40 mm0.006 mm to 0.015 mmM6 × 1 mmNot RatedRockwell C52DIN 7979D-m6—97355A506000000000000
    50 mm0.006 mm to 0.015 mmM6 × 1 mmNot RatedRockwell C52DIN 7979D-m6—97355A507000000000000
    60 mm0.006 mm to 0.015 mmM6 × 1 mmNot RatedRockwell C52DIN 7979D-m6—97355A515000000000000
    70 mm0.006 mm to 0.015 mmM6 × 1 mmNot RatedRockwell C52DIN 7979D-m6—97355A518000000000000
    80 mm0.006 mm to 0.015 mmM6 × 1 mmNot RatedRockwell C52DIN 7979D-m6—97355A520000000000000
     
    12 mm Diameter
    24 mm0.007 mm to 0.018 mmM6 × 1 mm24,000 lbfRockwell C52DIN 7979D-m6—97355A531000000000000
    30 mm0.007 mm to 0.018 mmM6 × 1 mm24,000 lbfRockwell C52DIN 7979D-m6—97355A535000000000000
    36 mm0.007 mm to 0.018 mmM6 × 1 mm24,000 lbfRockwell C52DIN 7979D-m6—97355A539000000000000
    45 mm0.007 mm to 0.018 mmM6 × 1 mm24,000 lbfRockwell C52DIN 7979D-m6—97355A543000000000000
    50 mm0.007 mm to 0.018 mmM6 × 1 mm24,000 lbfRockwell C52DIN 7979D-m6—97355A547000000000000
    60 mm0.007 mm to 0.018 mmM6 × 1 mm24,000 lbfRockwell C52DIN 7979D-m6—97355A551000000000000
     
    Pin Removal Tools
    Each
    Puller Handle92330A300000000
    Tip for 3/16"-5/8" (6-12 mm) Diameter Pin92330A41100000
    Tip for 3/4"-1-1/2" (13-20 mm) Diameter Pin92330A51100000
    Extension (5 1/2" Overall Length)92330A22000000
    Corrosion-Resistant Stainless SteelAbout Corrosion-Resistant Stainless Steel
    Image of Product. Front orientation. Dowel Pins. Standard Tolerance, Tapped Head, Pull-Out Removal.
    18-8 Stainless Steel—The choice for wet and outdoor environments. In addition to resisting rust, these pins also withstand mild chemicals such as cleaners and degreasers. They are strong enough to join most components but won't withstand extreme stress and vibration as well as steel.
    Each
    Lg.
    Dia. Tolerance
    Thread
    Size
    Double Shear Breaking
    Strength
    Min.
    Hardness
    Specs. Met
    Certificate Type
    1-49
    50-199
    200-Up
    18-8 Stainless Steel
     
    3/16" Diameter
    1/2"0.0001" to 0.0003"8-32
    		Not RatedNot RatedASME B18.8.2—97175A734000000000000000
    9/16"0.0001" to 0.0003"8-32
    		Not RatedNot RatedASME B18.8.2Material Certificate
    		97175A735000000000000
    5/8"0.0001" to 0.0003"8-32
    		Not RatedNot RatedASME B18.8.2—97175A736000000000000
    3/4"0.0001" to 0.0003"8-32
    		Not RatedNot RatedASME B18.8.2Material Certificate
    		97175A737000000000000
    7/8"0.0001" to 0.0003"8-32
    		Not RatedNot RatedASME B18.8.2—97175A738000000000000
    1"0.0001" to 0.0003"8-32
    		Not RatedNot RatedASME B18.8.2—97175A739000000000000
    1 1/8"0.0001" to 0.0003"8-32
    		Not RatedNot RatedASME B18.8.2—97175A741000000000000
    1 1/4"0.0001" to 0.0003"8-32
    		Not RatedNot RatedASME B18.8.2—97175A742000000000000
    1 3/8"0.0001" to 0.0003"8-32
    		Not RatedNot RatedASME B18.8.2—97175A743000000000000
    1 1/2"0.0001" to 0.0003"8-32
    		Not RatedNot RatedASME B18.8.2—97175A744000000000000
    1 3/4"0.0001" to 0.0003"8-32
    		Not RatedNot RatedASME B18.8.2—97175A745000000000000
    2"0.0001" to 0.0003"8-32
    		Not RatedNot RatedASME B18.8.2—97175A746000000000000
    2 1/2"0.0001" to 0.0003"8-32
    		Not RatedNot RatedASME B18.8.2—97175A747000000000000
     
    1/4" Diameter
    1/2"0.0001" to 0.0003"8-32
    		Not RatedNot RatedASME B18.8.2—97175A809000000000000
    5/8"0.0001" to 0.0003"8-32
    		Not RatedNot RatedASME B18.8.2Material Certificate
    		97175A748000000000000
    3/4"0.0001" to 0.0003"8-32
    		Not RatedNot RatedASME B18.8.2—97175A811000000000000
    7/8"0.0001" to 0.0003"8-32
    		Not RatedNot RatedASME B18.8.2—97175A749000000000000
    1"0.0001" to 0.0003"8-32
    		Not RatedNot RatedASME B18.8.2—97175A815000000000000
    1 1/8"0.0001" to 0.0003"8-32
    		Not RatedNot RatedASME B18.8.2—97175A751000000000000
    1 1/4"0.0001" to 0.0003"8-32
    		Not RatedNot RatedASME B18.8.2—97175A816000000000000
    1 3/8"0.0001" to 0.0003"8-32
    		Not RatedNot RatedASME B18.8.2—97175A752000000000000
    1 1/2"0.0001" to 0.0003"8-32
    		Not RatedNot RatedASME B18.8.2Material Certificate
    		97175A818000000000000
    1 3/4"0.0001" to 0.0003"8-32
    		Not RatedNot RatedASME B18.8.2Material Certificate
    		97175A819000000000000
    2"0.0001" to 0.0003"8-32
    		Not RatedNot RatedASME B18.8.2—97175A821000000000000
    2 1/4"0.0001" to 0.0003"8-32
    		Not RatedNot RatedASME B18.8.2—97175A753000000000000
    2 1/2"0.0001" to 0.0003"8-32
    		Not RatedNot RatedASME B18.8.2—97175A825000000000000
    3"0.0001" to 0.0003"8-32
    		Not RatedNot RatedASME B18.8.2—97175A754000000000000
     
    5/16" Diameter
    1/2"0.0001" to 0.0003"10-32
    		Not RatedNot RatedASME B18.8.2—97175A755000000000000
    3/4"0.0001" to 0.0003"10-32
    		Not RatedNot RatedASME B18.8.2—97175A829000000000000
    7/8"0.0001" to 0.0003"10-32
    		Not RatedNot RatedASME B18.8.2—97175A756000000000000
    1"0.0001" to 0.0003"10-32
    		Not RatedNot RatedASME B18.8.2—97175A832000000000000
    1 1/4"0.0001" to 0.0003"10-32
    		Not RatedNot RatedASME B18.8.2—97175A834000000000000
    1 1/2"0.0001" to 0.0003"10-32
    		Not RatedNot RatedASME B18.8.2—97175A836000000000000
    2"0.0001" to 0.0003"10-32
    		Not RatedNot RatedASME B18.8.2—97175A890000000000000
    2 1/2"0.0001" to 0.0003"10-32
    		Not RatedNot RatedASME B18.8.2—97175A841000000000000
     
    3/8" Diameter
    1/2"0.0001" to 0.0003"10-32
    		Not RatedNot RatedASME B18.8.2—97175A757000000000000
    5/8"0.0001" to 0.0003"10-32
    		Not RatedNot RatedASME B18.8.2—97175A758000000000000
    3/4"0.0001" to 0.0003"10-32
    		Not RatedNot RatedASME B18.8.2—97175A759000000000000
    7/8"0.0001" to 0.0003"10-32
    		Not RatedNot RatedASME B18.8.2—97175A761000000000000
    1"0.0001" to 0.0003"10-32
    		Not RatedNot RatedASME B18.8.2—97175A848000000000000
    1 1/4"0.0001" to 0.0003"10-32
    		Not RatedNot RatedASME B18.8.2—97175A849000000000000
    1 1/2"0.0001" to 0.0003"10-32
    		Not RatedNot RatedASME B18.8.2—97175A852000000000000
    1 3/4"0.0001" to 0.0003"10-32
    		Not RatedNot RatedASME B18.8.2—97175A762000000000000
    2"0.0001" to 0.0003"10-32
    		Not RatedNot RatedASME B18.8.2—97175A855000000000000
    2 1/4"0.0001" to 0.0003"10-32
    		Not RatedNot RatedASME B18.8.2—97175A857000000000000
    2 1/2"0.0001" to 0.0003"10-32
    		Not RatedNot RatedASME B18.8.2—97175A858000000000000
    3"0.0001" to 0.0003"10-32
    		Not RatedNot RatedASME B18.8.2—97175A864000000000000
     
    7/16" Diameter
    1"0.0001" to 0.0003"1/4"-20
    		Not RatedNot RatedASME B18.8.2—97175A866000000000000
    1 1/2"0.0001" to 0.0003"1/4"-20
    		Not RatedNot RatedASME B18.8.2—97175A869000000000000
    2"0.0001" to 0.0003"1/4"-20
    		Not RatedNot RatedASME B18.8.2—97175A874000000000000
     
    1/2" Diameter
    3/4"0.0001" to 0.0003"1/4"-20
    		Not RatedNot RatedASME B18.8.2—97175A876000000000000
    1"0.0001" to 0.0003"1/4"-20
    		Not RatedNot RatedASME B18.8.2Material Certificate
    		97175A877000000000000
    1 1/4"0.0001" to 0.0003"1/4"-20
    		Not RatedNot RatedASME B18.8.2—97175A878000000000000
    1 1/2"0.0001" to 0.0003"1/4"-20
    		Not RatedNot RatedASME B18.8.2Material Certificate
    		97175A879000000000000
    1 3/4"0.0001" to 0.0003"1/4"-20
    		Not RatedNot RatedASME B18.8.2—97175A881000000000000
    2"0.0001" to 0.0003"1/4"-20
    		Not RatedNot RatedASME B18.8.2—97175A883000000000000
    2 1/4"0.0001" to 0.0003"1/4"-20
    		Not RatedNot RatedASME B18.8.2—97175A885000000000000
    2 1/2"0.0001" to 0.0003"1/4"-20
    		Not RatedNot RatedASME B18.8.2—97175A891000000000000
    3"0.0001" to 0.0003"1/4"-20
    		Not RatedNot RatedASME B18.8.2—97175A895000000000000
    3 1/2"0.0001" to 0.0003"1/4"-20
    		Not RatedNot RatedASME B18.8.2—97175A897000000000000000
    4"0.0001" to 0.0003"1/4"-20
    		Not RatedNot RatedASME B18.8.2—97175A89900000000000000
     
    5/8" Diameter
    1 1/4"0.0001" to 0.0003"1/4"-20
    		Not RatedNot RatedASME B18.8.2—97175A910000000000000
    1 1/2"0.0001" to 0.0003"1/4"-20
    		Not RatedNot RatedASME B18.8.2—97175A9110000000000000
    2"0.0001" to 0.0003"1/4"-20
    		Not RatedNot RatedASME B18.8.2—97175A91300000000000000
    2 1/4"0.0001" to 0.0003"1/4"-20
    		Not RatedNot RatedASME B18.8.2—97175A91400000000000000
    2 1/2"0.0001" to 0.0003"1/4"-20
    		Not RatedNot RatedASME B18.8.2—97175A91500000000000000
    3"0.0001" to 0.0003"1/4"-20
    		Not RatedNot RatedASME B18.8.2—97175A917000000000000000
    4"0.0001" to 0.0003"1/4"-20
    		Not RatedNot RatedASME B18.8.2—97175A92100000000000000
     
    3/4" Diameter
    1 1/2"0.0001" to 0.0003"5/16"-18
    		Not RatedNot RatedASME B18.8.2—97175A926000000000000
    2"0.0001" to 0.0003"5/16"-18
    		Not RatedNot RatedASME B18.8.2—97175A931000000000000000
    2 1/2"0.0001" to 0.0003"5/16"-18
    		Not RatedNot RatedASME B18.8.2—97175A935000000000000000
    3"0.0001" to 0.0003"5/16"-18
    		Not RatedNot RatedASME B18.8.2—97175A939000000000000000
    4"0.0001" to 0.0003"5/16"-18
    		Not RatedNot RatedASME B18.8.2—97175A940000000000000000
     
    1" Diameter
    2"0.0001" to 0.0003"5/16"-18
    		Not RatedNot RatedASME B18.8.2Material Certificate
    		97175A942000000000000000
    2 1/2"0.0001" to 0.0003"5/16"-18
    		Not RatedNot Rated——97175A946000000000000000
    3"0.0001" to 0.0003"5/16"-18
    		Not RatedNot RatedASME B18.8.2—97175A949000000000000000
    4"0.0001" to 0.0003"5/16"-18
    		Not RatedNot RatedASME B18.8.2Material Certificate
    		97175A953000000000000000
     
    Pin Removal Tools
    Each
    Puller Handle92330A300000000
    Tip for 3/16"-5/8" (6-12 mm) Diameter Pin92330A41100000
    Tip for 3/4"-1-1/2" (13-20 mm) Diameter Pin92330A51100000
    Extension (5 1/2" Overall Length)92330A22000000

    Vented Pull-Out Dowel Pins

    Insert and remove from blind holes with less effort than pins that aren't vented. The vent relieves trapped air, so pressure doesn't create resistance as you install the pin. Because they have a tapped end, you can thread in a screw and pull the pin out with a removal tool (sold separately). You can also pull using pliers, but there’s more risk of damaging the hole.
    Flat Shaft
    Image of Product. Front orientation. Dowel Pins. Tapped Head, Pull-Out Removal, Vented, Standard Tolerance, Flat Shaft.
    The flat side of these pins creates a vent that's less likely to be blocked than a spiral shaft, but doesn’t offer quite as strong of a hold.
    High-Strength Alloy Steel—Our strongest, most wear-resistant pins, these won't bend or break from vibration. Use them for high-stress applications, such as mounting and aligning hydraulic cylinders and injection molds. They perform best in dry environments since moisture will cause them to rust.
    Spring Steel—These pins won't deform from stress and vibration. They're stronger than stainless steel but not quite as strong as alloy steel. Pins perform best in dry environments since moisture will cause them to rust.
    18-8 Stainless Steel—The choice for wet and outdoor environments. In addition to resisting rust, these pins also withstand mild chemicals such as cleaners and degreasers. They are strong enough to join most components but won't withstand extreme stress and vibration as well as steel.
    Material Certificate—Pins include a report with a traceable lot number and a description of their chemical, physical, and mechanical properties.
    Lg.
    Dia. Tolerance
    Thread Size
    Double Shear Breaking
    Strength
    Min.
    Hardness
    Specs. Met
    Certificate Type
    Each
    High-Strength Alloy Steel
     
    1/4" Diameter
    3/4"0.0001" to 0.0003"8-32
    		6,400 lbfRockwell C47ASME B18.8.2—97360A11000000
    1"0.0001" to 0.0003"8-32
    		6,400 lbfRockwell C47ASME B18.8.2—97360A1200000
    1 1/4"0.0001" to 0.0003"8-32
    		6,400 lbfRockwell C47ASME B18.8.2—97360A1300000
    1 1/2"0.0001" to 0.0003"8-32
    		6,400 lbfRockwell C47ASME B18.8.2—97360A1400000
    1 3/4"0.0001" to 0.0003"8-32
    		6,400 lbfRockwell C47ASME B18.8.2—97360A1500000
    2"0.0001" to 0.0003"8-32
    		6,400 lbfRockwell C47ASME B18.8.2—97360A1600000
    2 1/2"0.0001" to 0.0003"8-32
    		6,400 lbfRockwell C47ASME B18.8.2—97360A1700000
     
    5/16" Diameter
    3/4"0.0001" to 0.0003"10-32
    		10,000 lbfRockwell C47ASME B18.8.2—97360A1800000
    1"0.0001" to 0.0003"10-32
    		10,000 lbfRockwell C47ASME B18.8.2—97360A1900000
    1 1/4"0.0001" to 0.0003"10-32
    		10,000 lbfRockwell C47ASME B18.8.2—97360A2000000
    1 1/2"0.0001" to 0.0003"10-32
    		10,000 lbfRockwell C47ASME B18.8.2—97360A2100000
    2"0.0001" to 0.0003"10-32
    		10,000 lbfRockwell C47ASME B18.8.2—97360A2220000
    2 1/2"0.0001" to 0.0003"10-32
    		10,000 lbfRockwell C47ASME B18.8.2—97360A2400000
     
    3/8" Diameter
    1"0.0001" to 0.0003"10-32
    		14,300 lbfRockwell C47ASME B18.8.2—97360A2500000
    1 1/4"0.0001" to 0.0003"10-32
    		14,300 lbfRockwell C47ASME B18.8.2—97360A2600000
    1 1/2"0.0001" to 0.0003"10-32
    		14,300 lbfRockwell C47ASME B18.8.2—97360A2700000
    2"0.0001" to 0.0003"10-32
    		14,300 lbfRockwell C47ASME B18.8.2—97360A2900000
    2 1/4"0.0001" to 0.0003"10-32
    		14,300 lbfRockwell C47ASME B18.8.2—97360A3000000
    2 1/2"0.0001" to 0.0003"10-32
    		14,300 lbfRockwell C47ASME B18.8.2—97360A3100000
    3"0.0001" to 0.0003"10-32
    		14,300 lbfRockwell C47ASME B18.8.2—97360A3200000
     
    1/2" Diameter
    1"0.0001" to 0.0003"1/4"-20
    		25,500 lbfRockwell C47ASME B18.8.2—97360A3300000
    1 1/4"0.0001" to 0.0003"1/4"-20
    		25,500 lbfRockwell C47ASME B18.8.2—97360A3400000
    1 1/2"0.0001" to 0.0003"1/4"-20
    		25,500 lbfRockwell C47ASME B18.8.2—97360A3500000
    1 3/4"0.0001" to 0.0003"1/4"-20
    		25,500 lbfRockwell C47ASME B18.8.2—97360A3600000
    2"0.0001" to 0.0003"1/4"-20
    		25,500 lbfRockwell C47ASME B18.8.2—97360A3700000
    2 1/2"0.0001" to 0.0003"1/4"-20
    		25,500 lbfRockwell C47ASME B18.8.2—97360A3900000
    3"0.0001" to 0.0003"1/4"-20
    		25,500 lbfRockwell C47ASME B18.8.2—97360A4000000
    3 1/2"0.0001" to 0.0003"1/4"-20
    		25,500 lbfRockwell C47ASME B18.8.2—97360A4100000
     
    5/8" Diameter
    1 1/2"0.0001" to 0.0003"1/4"-20
    		39,000 lbfRockwell C47ASME B18.8.2—97360A4300000
    2"0.0001" to 0.0003"1/4"-20
    		39,000 lbfRockwell C47ASME B18.8.2—97360A4400000
    2 1/4"0.0001" to 0.0003"1/4"-20
    		39,000 lbfRockwell C47ASME B18.8.2—97360A4800000
    2 1/2"0.0001" to 0.0003"1/4"-20
    		39,000 lbfRockwell C47ASME B18.8.2—97360A4900000
    3"0.0001" to 0.0003"1/4"-20
    		39,000 lbfRockwell C47ASME B18.8.2—97360A47000000
     
    3/4" Diameter
    2"0.0001" to 0.0003"5/16"-18
    		57,000 lbfRockwell C47ASME B18.8.2—97360A50000000
    3"0.0001" to 0.0003"5/16"-18
    		57,000 lbfRockwell C47ASME B18.8.2—97360A51000000
    4"0.0001" to 0.0003"5/16"-18
    		57,000 lbfRockwell C47ASME B18.8.2—97360A57000000
     
    1" Diameter
    2"0.0001" to 0.0003"5/16"-18
    		102,000 lbfRockwell C47ASME B18.8.2—97360A53000000
    3"0.0001" to 0.0003"5/16"-18
    		102,000 lbfRockwell C47ASME B18.8.2—97360A55000000
    4"0.0001" to 0.0003"5/16"-18
    		102,000 lbfRockwell C47ASME B18.8.2—97360A58000000
     
    16 mm Diameter
    32 mm0.007 mm to 0.018 mmM8 × 1.25 mm33,500 lbfRockwell C52DIN 7979D-m6—98432A3820000
    40 mm0.007 mm to 0.018 mmM8 × 1.25 mm33,500 lbfRockwell C52DIN 7979D-m6—98432A3860000
    50 mm0.007 mm to 0.018 mmM8 × 1.25 mm33,500 lbfRockwell C52DIN 7979D-m6—98432A3900000
    60 mm0.007 mm to 0.018 mmM8 × 1.25 mm33,500 lbfRockwell C52DIN 7979D-m6—98432A3940000
    70 mm0.007 mm to 0.018 mmM8 × 1.25 mm33,500 lbfRockwell C52DIN 7979D-m6—98432A3980000
    80 mm0.007 mm to 0.018 mmM8 × 1.25 mm33,500 lbfRockwell C52DIN 7979D-m6—98432A4020000
     
    Spring Steel
     
    6 mm Diameter
    16 mm0.004 mm to 0.012 mmM4 × 0.7 mm6,600 lbfRockwell C52DIN 7979D-m6—98432A2060000
    18 mm0.004 mm to 0.012 mmM4 × 0.7 mm6,600 lbfRockwell C52DIN 7979D-m6—98432A2100000
    20 mm0.004 mm to 0.012 mmM4 × 0.7 mm6,600 lbfRockwell C52DIN 7979D-m6—98432A2160000
    24 mm0.004 mm to 0.012 mmM4 × 0.7 mm6,600 lbfRockwell C52DIN 7979D-m6—98432A2200000
    28 mm0.004 mm to 0.012 mmM4 × 0.7 mm6,600 lbfRockwell C52DIN 7979D-m6—98432A2240000
    30 mm0.004 mm to 0.012 mmM4 × 0.7 mm6,600 lbfRockwell C52DIN 7979D-m6—98432A2280000
    36 mm0.004 mm to 0.012 mmM4 × 0.7 mm6,600 lbfRockwell C52DIN 7979D-m6—98432A2360000
    40 mm0.004 mm to 0.012 mmM4 × 0.7 mm6,600 lbfRockwell C52DIN 7979D-m6—98432A2400000
    50 mm0.004 mm to 0.012 mmM4 × 0.7 mm6,600 lbfRockwell C52DIN 7979D-m6—98432A2440000
     
    8 mm Diameter
    20 mm0.006 mm to 0.015 mmM5 × 0.8 mm10,400 lbfRockwell C52DIN 7979D-m6—98432A2610000
    24 mm0.006 mm to 0.015 mmM5 × 0.8 mm10,400 lbfRockwell C52DIN 7979D-m6—98432A2650000
    28 mm0.006 mm to 0.015 mmM5 × 0.8 mm10,400 lbfRockwell C52DIN 7979D-m6—98432A2690000
    30 mm0.006 mm to 0.015 mmM5 × 0.8 mm10,400 lbfRockwell C52DIN 7979D-m6—98432A2740000
    36 mm0.006 mm to 0.015 mmM5 × 0.8 mm10,400 lbfRockwell C52DIN 7979D-m6—98432A2820000
    40 mm0.006 mm to 0.015 mmM5 × 0.8 mm10,400 lbfRockwell C52DIN 7979D-m6—98432A2860000
    50 mm0.006 mm to 0.015 mmM5 × 0.8 mm10,400 lbfRockwell C52DIN 7979D-m6—98432A2900000
    60 mm0.006 mm to 0.015 mmM5 × 0.8 mm10,400 lbfRockwell C52DIN 7979D-m6—98432A2940000
    70 mm0.006 mm to 0.015 mmM5 × 0.8 mm10,400 lbfRockwell C52DIN 7979D-m6—98432A2980000
     
    10 mm Diameter
    24 mm0.006 mm to 0.015 mmM6 × 1 mmNot RatedRockwell C52DIN 7979D-m6—98432A3030000
    28 mm0.006 mm to 0.015 mmM6 × 1 mmNot RatedRockwell C52DIN 7979D-m6—98432A3070000
    30 mm0.006 mm to 0.015 mmM6 × 1 mmNot RatedRockwell C52DIN 7979D-m6—98432A3110000
    36 mm0.006 mm to 0.015 mmM6 × 1 mmNot RatedRockwell C52DIN 7979D-m6—98432A3150000
    40 mm0.006 mm to 0.015 mmM6 × 1 mmNot RatedRockwell C52DIN 7979D-m6—98432A3190000
    50 mm0.006 mm to 0.015 mmM6 × 1 mmNot RatedRockwell C52DIN 7979D-m6—98432A3230000
    60 mm0.006 mm to 0.015 mmM6 × 1 mmNot RatedRockwell C52DIN 7979D-m6—98432A3270000
    70 mm0.006 mm to 0.015 mmM6 × 1 mmNot RatedRockwell C52DIN 7979D-m6—98432A3320000
     
    12 mm Diameter
    24 mm0.007 mm to 0.018 mmM6 × 1 mm24,000 lbfRockwell C52DIN 7979D-m6—98432A3410000
    30 mm0.007 mm to 0.018 mmM6 × 1 mm24,000 lbfRockwell C52DIN 7979D-m6—98432A3450000
    36 mm0.007 mm to 0.018 mmM6 × 1 mm24,000 lbfRockwell C52DIN 7979D-m6—98432A3490000
    40 mm0.007 mm to 0.018 mmM6 × 1 mm24,000 lbfRockwell C52DIN 7979D-m6—98432A3530000
    45 mm0.007 mm to 0.018 mmM6 × 1 mm24,000 lbfRockwell C52DIN 7979D-m6—98432A3570000
    50 mm0.007 mm to 0.018 mmM6 × 1 mm24,000 lbfRockwell C52DIN 7979D-m6—98432A3620000
    60 mm0.007 mm to 0.018 mmM6 × 1 mm24,000 lbfRockwell C52DIN 7979D-m6—98432A3660000
     
    18-8 Stainless Steel
     
    1/4" Diameter
    3/4"0.0001" to 0.0003"8-32
    		Not RatedRockwell C47ASME B18.8.2—97365A1100000
    1"0.0001" to 0.0003"8-32
    		Not RatedRockwell C47ASME B18.8.2—97365A1200000
    1 1/4"0.0001" to 0.0003"8-32
    		Not RatedRockwell C47ASME B18.8.2—97365A1300000
    1 1/2"0.0001" to 0.0003"8-32
    		Not RatedRockwell C47ASME B18.8.2—97365A1400000
    1 3/4"0.0001" to 0.0003"8-32
    		Not RatedRockwell C47ASME B18.8.2—97365A1500000
    2"0.0001" to 0.0003"8-32
    		Not RatedRockwell C47ASME B18.8.2—97365A1600000
    2 1/2"0.0001" to 0.0003"8-32
    		Not RatedRockwell C47ASME B18.8.2—97365A1700000
     
    5/16" Diameter
    3/4"0.0001" to 0.0003"10-32
    		Not RatedRockwell C47ASME B18.8.2—97365A1800000
    1"0.0001" to 0.0003"10-32
    		Not RatedRockwell C47ASME B18.8.2—97365A1900000
    1 1/4"0.0001" to 0.0003"10-32
    		Not RatedRockwell C47ASME B18.8.2—97365A2000000
    1 1/2"0.0001" to 0.0003"10-32
    		Not RatedRockwell C47ASME B18.8.2—97365A2100000
    2"0.0001" to 0.0003"10-32
    		Not RatedRockwell C47ASME B18.8.2—97365A22200000
    2 1/2"0.0001" to 0.0003"10-32
    		Not RatedRockwell C47ASME B18.8.2Material Certificate
    		97365A24000000
     
    3/8" Diameter
    1"0.0001" to 0.0003"10-32
    		Not RatedRockwell C47ASME B18.8.2—97365A25000000
    1 1/4"0.0001" to 0.0003"10-32
    		Not RatedRockwell C47ASME B18.8.2—97365A26000000
    1 1/2"0.0001" to 0.0003"10-32
    		Not RatedRockwell C47ASME B18.8.2—97365A27000000
    2"0.0001" to 0.0003"10-32
    		Not RatedRockwell C47ASME B18.8.2—97365A29000000
    2 1/2"0.0001" to 0.0003"10-32
    		Not RatedRockwell C47ASME B18.8.2—97365A31000000
    3"0.0001" to 0.0003"10-32
    		Not RatedRockwell C47ASME B18.8.2—97365A32000000
     
    1/2" Diameter
    1"0.0001" to 0.0003"1/4"-20
    		Not RatedRockwell C47ASME B18.8.2—97365A33000000
    1 1/4"0.0001" to 0.0003"1/4"-20
    		Not RatedRockwell C47ASME B18.8.2—97365A34000000
    1 1/2"0.0001" to 0.0003"1/4"-20
    		Not RatedRockwell C47ASME B18.8.2—97365A35000000
    1 3/4"0.0001" to 0.0003"1/4"-20
    		Not RatedRockwell C47ASME B18.8.2—97365A36000000
    2"0.0001" to 0.0003"1/4"-20
    		Not RatedRockwell C47ASME B18.8.2—97365A37000000
    2 1/2"0.0001" to 0.0003"1/4"-20
    		Not RatedRockwell C47ASME B18.8.2—97365A39000000
    3"0.0001" to 0.0003"1/4"-20
    		Not RatedRockwell C47ASME B18.8.2—97365A40000000
     
    5/8" Diameter
    1 1/2"0.0001" to 0.0003"1/4"-20
    		Not RatedRockwell C47ASME B18.8.2—97365A43000000
    2"0.0001" to 0.0003"1/4"-20
    		Not RatedRockwell C47ASME B18.8.2—97365A44000000
    3"0.0001" to 0.0003"1/4"-20
    		Not RatedRockwell C47ASME B18.8.2—97365A47000000
     
    3/4" Diameter
    2"0.0001" to 0.0003"5/16"-18
    		Not RatedRockwell C47ASME B18.8.2—97365A50000000
    3"0.0001" to 0.0003"5/16"-18
    		Not RatedRockwell C47ASME B18.8.2—97365A51000000
     
    1" Diameter
    2"0.0001" to 0.0003"5/16"-18
    		Not RatedRockwell C47ASME B18.8.2—97365A53000000
    3"0.0001" to 0.0003"5/16"-18
    		Not RatedRockwell C47ASME B18.8.2—97365A62000000
     
    4 mm Diameter
    16 mm0.004 mm to 0.015 mmM3 × 0.5 mm101,000 lbfRockwell C18DIN 7979C-m6—98432A1110000
    20 mm0.004 mm to 0.015 mmM3 × 0.5 mm101,000 lbfRockwell C18DIN 7979C-m6—98432A11200000
     
    5 mm Diameter
    10 mm0.004 mm to 0.015 mmM3 × 0.5 mm101,000 lbfRockwell C18DIN 7979C-m6—98432A1130000
    24 mm0.004 mm to 0.015 mmM3 × 0.5 mm101,000 lbfRockwell C18DIN 7979C-m6—98432A11400000
     
    6 mm Diameter
    16 mm0.004 mm to 0.015 mmM4 × 0.7 mm101,000 lbfRockwell C18DIN 7979C-m6—98432A11500000
    24 mm0.004 mm to 0.015 mmM4 × 0.7 mm101,000 lbfRockwell C18DIN 7979C-m6—98432A1170000
    30 mm0.004 mm to 0.015 mmM4 × 0.7 mm101,000 lbfRockwell C18DIN 7979C-m6—98432A11900000
    36 mm0.004 mm to 0.015 mmM4 × 0.7 mm101,000 lbfRockwell C18DIN 7979C-m6—98432A12100000
    40 mm0.004 mm to 0.015 mmM4 × 0.7 mm101,000 lbfRockwell C18DIN 7979C-m6—98432A12200000
     
    8 mm Diameter
    16 mm0.006 mm to 0.015 mmM5 × 0.8 mm101,000 lbfRockwell C18DIN 7979C-m6—98432A12400000
    20 mm0.006 mm to 0.015 mmM5 × 0.8 mm101,000 lbfRockwell C18DIN 7979C-m6—98432A12500000
    24 mm0.006 mm to 0.015 mmM5 × 0.8 mm101,000 lbfRockwell C18DIN 7979C-m6—98432A12600000
    30 mm0.006 mm to 0.015 mmM5 × 0.8 mm101,000 lbfRockwell C18DIN 7979C-m6—98432A12700000
    40 mm0.006 mm to 0.015 mmM5 × 0.8 mm101,000 lbfRockwell C18DIN 7979C-m6—98432A12800000
    50 mm0.006 mm to 0.015 mmM5 × 0.8 mm101,000 lbfRockwell C18DIN 7979C-m6—98432A12900000
    60 mm0.006 mm to 0.015 mmM5 × 0.8 mm101,000 lbfRockwell C18DIN 7979C-m6—98432A13100000
    100 mm0.006 mm to 0.015 mmM5 × 0.8 mm101,000 lbfRockwell C18DIN 7979C-m6—98432A13200000
     
    10 mm Diameter
    20 mm0.006 mm to 0.015 mmM6 × 1 mm101,000 lbfRockwell C18DIN 7979C-m6—98432A13300000
    40 mm0.006 mm to 0.015 mmM6 × 1 mm101,000 lbfRockwell C18DIN 7979C-m6—98432A13700000
    60 mm0.006 mm to 0.015 mmM6 × 1 mm101,000 lbfRockwell C18DIN 7979C-m6—98432A13900000
    80 mm0.006 mm to 0.015 mmM6 × 1 mm101,000 lbfRockwell C18DIN 7979C-m6—98432A14100000
     
    12 mm Diameter
    24 mm0.007 mm to 0.018 mmM6 × 1 mm101,000 lbfRockwell C18DIN 7979C-m6—98432A14200000
    40 mm0.007 mm to 0.018 mmM6 × 1 mm101,000 lbfRockwell C18DIN 7979C-m6—98432A14500000
    50 mm0.007 mm to 0.018 mmM6 × 1 mm101,000 lbfRockwell C18DIN 7979C-m6—98432A14600000
    80 mm0.007 mm to 0.018 mmM6 × 1 mm101,000 lbfRockwell C18DIN 7979C-m6—98432A14800000
     
    Pin Removal Tools
    Each
    Puller Handle92330A300000000
    Tip for 3/16"-5/8" (6-12 mm) Diameter Pin92330A41100000
    Tip for 3/4"-1-1/2" (13-20 mm) Diameter Pin92330A51100000
    Extension (5 1/2" Overall Length)92330A22000000
    Spiral Shaft
    Image of Product. Front orientation. Dowel Pins. Tapped Head, Pull-Out Removal, Vented, Standard Tolerance, Spiral Shaft.
    For a more secure hold under vibration than flat-shaft pins, the spiral makes 360° contact with the hole.
    High-Strength Alloy Steel—Our strongest, most wear-resistant pins, these won't bend or break from vibration. Use them for high-stress applications, such as mounting and aligning hydraulic cylinders and injection molds. They perform best in dry environments since moisture will cause them to rust.
    18-8 Stainless Steel—The choice for wet and outdoor environments. In addition to resisting rust, these pins also withstand mild chemicals such as cleaners and degreasers. They are strong enough to join most components but won't withstand extreme stress and vibration as well as steel.
    Material Certificate—Pins include a report with a traceable lot number and a description of their chemical, physical, and mechanical properties.
    Lg.
    Dia. Tolerance
    Thread
    Size
    Double Shear Breaking
    Strength
    Min.
    Hardness
    Specs. Met
    Certificate Type
    Each
    High-Strength Alloy Steel
     
    1/4" Diameter
    3/4"0.0001" to 0.0003"8-32
    		6,400 lbfRockwell C47ASME B18.8.2—97352A11000000
    1"0.0001" to 0.0003"8-32
    		6,400 lbfRockwell C47ASME B18.8.2—97352A1200000
    1 1/4"0.0001" to 0.0003"8-32
    		6,400 lbfRockwell C47ASME B18.8.2—97352A1300000
    1 1/2"0.0001" to 0.0003"8-32
    		6,400 lbfRockwell C47ASME B18.8.2—97352A1400000
    2"0.0001" to 0.0003"8-32
    		6,400 lbfRockwell C47ASME B18.8.2—97352A1600000
    2 1/2"0.0001" to 0.0003"8-32
    		6,400 lbfRockwell C47ASME B18.8.2—97352A1700000
     
    5/16" Diameter
    3/4"0.0001" to 0.0003"10-32
    		10,000 lbfRockwell C47ASME B18.8.2—97352A1800000
    1"0.0001" to 0.0003"10-32
    		10,000 lbfRockwell C47ASME B18.8.2—97352A1900000
    1 1/4"0.0001" to 0.0003"10-32
    		10,000 lbfRockwell C47ASME B18.8.2—97352A2000000
    1 1/2"0.0001" to 0.0003"10-32
    		10,000 lbfRockwell C47ASME B18.8.2—97352A2100000
    2"0.0001" to 0.0003"10-32
    		10,000 lbfRockwell C47ASME B18.8.2—97352A2200000
    2 1/2"0.0001" to 0.0003"10-32
    		10,000 lbfRockwell C47ASME B18.8.2—97352A2400000
     
    3/8" Diameter
    1"0.0001" to 0.0003"10-32
    		14,300 lbfRockwell C47ASME B18.8.2—97352A2500000
    1 1/4"0.0001" to 0.0003"10-32
    		14,300 lbfRockwell C47ASME B18.8.2—97352A2600000
    1 1/2"0.0001" to 0.0003"10-32
    		14,300 lbfRockwell C47ASME B18.8.2—97352A2700000
    1 3/4"0.0001" to 0.0003"10-32
    		14,300 lbfRockwell C47ASME B18.8.2—97352A2800000
    2"0.0001" to 0.0003"10-32
    		14,300 lbfRockwell C47ASME B18.8.2—97352A2900000
    2 1/4"0.0001" to 0.0003"10-32
    		14,300 lbfRockwell C47ASME B18.8.2—97352A3000000
    2 1/2"0.0001" to 0.0003"10-32
    		14,300 lbfRockwell C47ASME B18.8.2—97352A3100000
    3"0.0001" to 0.0003"10-32
    		14,300 lbfRockwell C47ASME B18.8.2—97352A3200000
     
    1/2" Diameter
    1"0.0001" to 0.0003"1/4"-20
    		25,500 lbfRockwell C47ASME B18.8.2—97352A3300000
    1 1/4"0.0001" to 0.0003"1/4"-20
    		25,500 lbfRockwell C47ASME B18.8.2—97352A3400000
    1 1/2"0.0001" to 0.0003"1/4"-20
    		25,500 lbfRockwell C47ASME B18.8.2—97352A3500000
    1 3/4"0.0001" to 0.0003"1/4"-20
    		25,500 lbfRockwell C47ASME B18.8.2—97352A3600000
    2"0.0001" to 0.0003"1/4"-20
    		25,500 lbfRockwell C47ASME B18.8.2—97352A3700000
    2 1/4"0.0001" to 0.0003"1/4"-20
    		25,500 lbfRockwell C47ASME B18.8.2—97352A3800000
    2 1/2"0.0001" to 0.0003"1/4"-20
    		25,500 lbfRockwell C47ASME B18.8.2—97352A3900000
    3"0.0001" to 0.0003"1/4"-20
    		25,500 lbfRockwell C47ASME B18.8.2—97352A4000000
    3 1/2"0.0001" to 0.0003"1/4"-20
    		25,500 lbfRockwell C47ASME B18.8.2—97352A4100000
     
    5/8" Diameter
    1 1/2"0.0001" to 0.0003"1/4"-20
    		39,000 lbfRockwell C47ASME B18.8.2—97352A4300000
    2"0.0001" to 0.0003"1/4"-20
    		39,000 lbfRockwell C47ASME B18.8.2—97352A4400000
    2 1/4"0.0001" to 0.0003"1/4"-20
    		39,000 lbfRockwell C47ASME B18.8.2—97352A4800000
    2 1/2"0.0001" to 0.0003"1/4"-20
    		39,000 lbfRockwell C47ASME B18.8.2—97352A46000000
    3"0.0001" to 0.0003"1/4"-20
    		39,000 lbfRockwell C47ASME B18.8.2—97352A47000000
     
    3/4" Diameter
    2"0.0001" to 0.0003"5/16"-18
    		57,000 lbfRockwell C47ASME B18.8.2—97352A49000000
    2 1/2"0.0001" to 0.0003"5/16"-18
    		57,000 lbfRockwell C47ASME B18.8.2—97352A50000000
    3"0.0001" to 0.0003"5/16"-18
    		57,000 lbfRockwell C47ASME B18.8.2—97352A51000000
    4"0.0001" to 0.0003"5/16"-18
    		57,000 lbfRockwell C47ASME B18.8.2—97352A57000000
     
    1" Diameter
    2"0.0001" to 0.0003"3/8"-16
    		102,000 lbfRockwell C47ASME B18.8.2—97352A53000000
    3"0.0001" to 0.0003"3/8"-16
    		102,000 lbfRockwell C47ASME B18.8.2—97352A55000000
    4"0.0001" to 0.0003"3/8"-16
    		102,000 lbfRockwell C47ASME B18.8.2—97352A58000000
     
    18-8 Stainless Steel
     
    1/4" Diameter
    3/4"0.0001" to 0.0003"8-32
    		Not RatedNot RatedASME B18.8.2—97352A6100000
    1"0.0001" to 0.0003"8-32
    		Not RatedNot RatedASME B18.8.2—97352A6200000
    1 1/4"0.0001" to 0.0003"8-32
    		Not RatedNot RatedASME B18.8.2—97352A6300000
    1 1/2"0.0001" to 0.0003"8-32
    		Not RatedNot RatedASME B18.8.2—97352A6400000
    2"0.0001" to 0.0003"8-32
    		Not RatedNot RatedASME B18.8.2Material Certificate
    		97352A6500000
    2 1/2"0.0001" to 0.0003"8-32
    		Not RatedNot RatedASME B18.8.2Material Certificate
    		97352A6600000
     
    5/16" Diameter
    3/4"0.0001" to 0.0003"10-32
    		Not RatedNot RatedASME B18.8.2—97352A6700000
    1"0.0001" to 0.0003"10-32
    		Not RatedNot RatedASME B18.8.2—97352A6800000
    1 1/4"0.0001" to 0.0003"10-32
    		Not RatedNot RatedASME B18.8.2—97352A6900000
    1 1/2"0.0001" to 0.0003"10-32
    		Not RatedNot RatedASME B18.8.2—97352A7100000
    2"0.0001" to 0.0003"10-32
    		Not RatedNot RatedASME B18.8.2—97352A7200000
     
    3/8" Diameter
    1"0.0001" to 0.0003"10-32
    		Not RatedNot RatedASME B18.8.2—97352A7300000
    1 1/4"0.0001" to 0.0003"10-32
    		Not RatedNot RatedASME B18.8.2—97352A7400000
    1 1/2"0.0001" to 0.0003"10-32
    		Not RatedNot RatedASME B18.8.2—97352A7500000
    1 3/4"0.0001" to 0.0003"10-32
    		Not RatedNot RatedASME B18.8.2—97352A7600000
    2"0.0001" to 0.0003"10-32
    		Not RatedNot RatedASME B18.8.2—97352A7700000
    2 1/4"0.0001" to 0.0003"10-32
    		Not RatedNot RatedASME B18.8.2—97352A7800000
    2 1/2"0.0001" to 0.0003"10-32
    		Not RatedNot RatedASME B18.8.2—97352A7900000
    3"0.0001" to 0.0003"10-32
    		Not RatedNot RatedASME B18.8.2—97352A81000000
     
    1/2" Diameter
    1"0.0001" to 0.0003"1/4"-20
    		Not RatedNot RatedASME B18.8.2—97352A8200000
    1 1/4"0.0001" to 0.0003"1/4"-20
    		Not RatedNot RatedASME B18.8.2—97352A8300000
    1 1/2"0.0001" to 0.0003"1/4"-20
    		Not RatedNot RatedASME B18.8.2—97352A8400000
    1 3/4"0.0001" to 0.0003"1/4"-20
    		Not RatedNot RatedASME B18.8.2—97352A8500000
    2"0.0001" to 0.0003"1/4"-20
    		Not RatedNot RatedASME B18.8.2—97352A8600000
    2 1/4"0.0001" to 0.0003"1/4"-20
    		Not RatedNot RatedASME B18.8.2Material Certificate
    		97352A8700000
    2 1/2"0.0001" to 0.0003"1/4"-20
    		Not RatedNot RatedASME B18.8.2—97352A88000000
    3"0.0001" to 0.0003"1/4"-20
    		Not RatedNot RatedASME B18.8.2—97352A89000000
    3 1/2"0.0001" to 0.0003"1/4"-20
    		Not RatedNot RatedASME B18.8.2—97352A91000000
     
    5/8" Diameter
    1 1/2"0.0001" to 0.0003"1/4"-20
    		Not RatedNot RatedASME B18.8.2Material Certificate
    		97352A9200000
    2"0.0001" to 0.0003"1/4"-20
    		Not RatedNot RatedASME B18.8.2Material Certificate
    		97352A93000000
    2 1/4"0.0001" to 0.0003"1/4"-20
    		Not RatedNot RatedASME B18.8.2Material Certificate
    		97352A94000000
    2 1/2"0.0001" to 0.0003"1/4"-20
    		Not RatedNot RatedASME B18.8.2Material Certificate
    		97352A95000000
    3"0.0001" to 0.0003"1/4"-20
    		Not RatedNot RatedASME B18.8.2Material Certificate
    		97352A96000000
     
    3/4" Diameter
    2"0.0001" to 0.0003"5/16"-18
    		Not RatedNot RatedASME B18.8.2—97352A97000000
    2 1/2"0.0001" to 0.0003"5/16"-18
    		Not RatedNot RatedASME B18.8.2Material Certificate
    		97352A97100000
    3"0.0001" to 0.0003"5/16"-18
    		Not RatedNot RatedASME B18.8.2Material Certificate
    		97352A97200000
    4"0.0001" to 0.0003"5/16"-18
    		Not RatedNot RatedASME B18.8.2—97352A97300000
     
    1" Diameter
    2"0.0001" to 0.0003"3/8"-16
    		Not RatedNot Rated——97352A97400000
    3"0.0001" to 0.0003"3/8"-16
    		Not RatedNot Rated—Material Certificate
    		97352A97500000
    4"0.0001" to 0.0003"3/8"-16
    		Not RatedNot Rated——97352A97600000
     
    Pin Removal Tools
    Each
    Puller Handle92330A300000000
    Tip for 3/16"-5/8" (6-12 mm) Diameter Pin92330A41100000
    Tip for 3/4"-1-1/2" (13-20 mm) Diameter Pin92330A51100000
    Extension (5 1/2" Overall Length)92330A22000000

    Tapped Taper Pins

    Image of Product. Front orientation. Taper Pins. Tapped Taper Pins.
    These internally threaded pins sit flush in an assembly. For easy removal from a blind hole, thread a screw into the pin and pull out. Often used for positioning components and securing assemblies, they taper at a uniform rate to fit in tapered holes. Use a tapered drill bit that matches the pin number for a snug fit. They have slightly rounded edges to aid insertion.
    12L14 Carbon Steel—12L14 Carbon steel pins have good strength.
    ASME B18.8.2—Pins meet ASME B18.8.2 specifications for material and dimensions.
    Lg.
    Small End
    Dia.
    Rate of
    Taper
    Thread
    Lg.
    Thread
    Size
    Specs. Met
    Each
    12L14 Carbon Steel
     
    5 Taper Pin—0.289" Large End Diameter
    1 1/4"0.263"1:483/8"10-24
    		ASME B18.8.290351A10100000
    2"0.248"1:483/8"10-24
    		ASME B18.8.290351A1020000
     
    6 Taper Pin—0.341" Large End Diameter
    2"0.3"1:487/16"1/4"-20
    		ASME B18.8.290351A1030000
    3"0.279"1:487/16"1/4"-20
    		ASME B18.8.290351A10400000
     
    7 Taper Pin—0.409" Large End Diameter
    3"0.347"1:481/2"5/16"-18
    		ASME B18.8.290351A10500000
    4"0.326"1:481/2"5/16"-18
    		ASME B18.8.290351A10600000
     
    8 Taper Pin—0.492" Large End Diameter
    3"0.43"1:481/2"5/16"-18
    		ASME B18.8.290351A10700000
    4"0.409"1:481/2"5/16"-18
    		ASME B18.8.290351A10800000
     
    9 Taper Pin—0.591" Large End Diameter
    5"0.487"1:485/8"3/8"-16
    		ASME B18.8.290351A10900000
    6"0.466"1:485/8"3/8"-16
    		ASME B18.8.290351A11100000
     
    10 Taper Pin—0.706" Large End Diameter
    4"0.623"1:483/4"1/2"-13
    		ASME B18.8.290351A11200000
    6"0.581"1:483/4"1/2"-13
    		ASME B18.8.290351A11300000
     

    Made-to-Order Pins

    Choose a material, head type, end type, and size to create a custom pin.
    Material Certificate Icon
    Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
    Tapped × Tapped
    Image of Product. Front orientation. Made-to-Order Pins. Made-to-Order Pins, Tapped × Tapped.
    Image of Attribute. Tapped. Front orientation. Contains Annotated. Tapped Head. Made-to-Order Pins, Tapped End.

    Tapped

    1144 Carbon Steel—Steel pins have good strength.
    18-8 Stainless Steel—Stainless steel pins are more corrosion resistant than steel pins. 18-8 stainless steel pins offer a balance of strength and corrosion resistance. They may be mildly magnetic.
    416 Stainless Steel—Stainless steel pins are more corrosion resistant than steel pins. 416 stainless steel pins are more wear-resistant than other stainless pins. They have some corrosion resistance and are magnetic.
    Each
    Dia.
    Choose a Length
    First Pin End—Thread
    Length
    Second Pin End—Thread
    Length
    Choose a Material
    First Pin End—Choose
    a Thread Size
    Second Pin End—Choose
    a Thread Size
    1-4
    5-9
    10-Up
    0.25"0.250" to 4.000"0.5"0.5"1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel6-32, 8-326-32, 8-324620N389000000000000000000
    0.3125"0.250" to 4.000"0.5"0.5"1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel8-32, 10-328-32, 10-324620N391000000000000000
    0.375"0.250" to 5.000"0.5"0.5"1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel10-32, 1/4"-2010-32, 1/4"-204620N3920000000000000000
    0.5"0.250" to 5.000"0.5"0.5"1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel5/16"-18, 3/8"-165/16"-18, 3/8"-164620N3930000000000000000
    0.625"0.250" to 5.000"0.5"0.5"1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel3/8"-16, 1/2"-133/8"-16, 1/2"-134620N3940000000000000000
    0.75"0.250" to 5.000"0.5"0.5"1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel1/2"-13, 5/8"-111/2"-13, 5/8"-114620N3950000000000000000
    Tapped × Threaded
    Image of Product. Front orientation. Made-to-Order Pins. Made-to-Order Pins, Tapped × Threaded.
    Image of Attribute. Threaded. Front orientation. Contains Annotated. Threaded End. Made-to-Order Pins, Tapped Head.
    Image of Attribute. Tapped. Front orientation. Contains Annotated. Tapped Head. Made-to-Order Pins, Threaded End.

    Threaded

    Tapped

    Length refers to the unthreaded portion of the pin.
    1144 Carbon Steel—Steel pins have good strength.
    18-8 Stainless Steel—Stainless steel pins are more corrosion resistant than steel pins. 18-8 stainless steel pins offer a balance of strength and corrosion resistance. They may be mildly magnetic.
    416 Stainless Steel—Stainless steel pins are more corrosion resistant than steel pins. 416 stainless steel pins are more wear-resistant than other stainless pins. They have some corrosion resistance and are magnetic.
    Threaded
    End
    Each
    Dia.
    Choose a Length
    Thread
    Lg.
    Thread
    Size
    Tapped End
    Thread Lg.
    Choose a Material
    Choose a Tapped End
    Thread Size
    1-4
    5-9
    10-Up
    0.25"0.250" to 4.000"0.25"10-32
    		0.5"1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel6-32, 8-324620N396000000000000000000
    0.3125"0.250" to 4.000"0.4375"1/4"-20
    		0.5"1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel8-32, 10-324620N397000000000000000
    0.375"0.250" to 5.000"0.5"5/16"-18
    		0.5"1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel10-32, 1/4"-204620N3980000000000000000
    0.5"0.250" to 5.000"0.625"3/8"-16
    		0.5"1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel5/16"-18, 3/8"-164620N3990000000000000000
    0.625"0.250" to 5.000"0.75"1/2"-13
    		0.5"1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel3/8"-16, 1/2"-134620N4010000000000000000
    0.75"0.250" to 5.000"0.875"5/8"-11
    		0.5"1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel1/2"-13, 5/8"-114620N4020000000000000000
    Tapped × Set Screw Flat
    Image of Product. Front orientation. Made-to-Order Pins. Made-to-Order Pins, Tapped × Set Screw Flat.
    Image of Attribute. Set Screw Flat. Front orientation. Contains Annotated. Set-Screw Flat End. Made-to-Order Pins, Tapped Head.
    Image of Attribute. Tapped. Front orientation. Contains Annotated. Tapped Head. Made-to-Order Pins, Set-Screw Flat End.

    Set Screw Flat

    Tapped

    1144 Carbon Steel—Steel pins have good strength.
    18-8 Stainless Steel—Stainless steel pins are more corrosion resistant than steel pins. 18-8 stainless steel pins offer a balance of strength and corrosion resistance. They may be mildly magnetic.
    416 Stainless Steel—Stainless steel pins are more corrosion resistant than steel pins. 416 stainless steel pins are more wear-resistant than other stainless pins. They have some corrosion resistance and are magnetic.
    Each
    Dia.
    Choose a Length
    Thread
    Lg.
    Flat
    Dp.
    Choose a Distance from
    Flat Edge to Pin End
    Choose a Flat
    Width
    Choose a Material
    Choose a Thread
    Size
    1-4
    5-9
    10-Up
    0.25"0.250" to 4.000"0.5"0.062"0.250" to 4.000"0.125" to 4.000"1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel6-32, 8-324620N403000000000000000000
    0.3125"0.250" to 4.000"0.5"0.062"0.250" to 4.000"0.125" to 4.000"1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel8-32, 10-324620N404000000000000000
    0.375"0.250" to 5.000"0.5"0.062"0.250" to 5.000"0.125" to 5.000"1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel10-32, 1/4"-204620N4050000000000000000
    0.5"0.250" to 5.000"0.5"0.062"0.250" to 5.000"0.125" to 5.000"1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel5/16"-18, 3/8"-164620N4060000000000000000
    0.625"0.250" to 5.000"0.5"0.062"0.250" to 5.000"0.125" to 5.000"1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel3/8"-16, 1/2"-134620N4070000000000000000
    0.75"0.250" to 5.000"0.5"0.062"0.250" to 5.000"0.125" to 5.000"1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel1/2"-13, 5/8"-114620N4080000000000000000
    back to top