Drill and tap holes with a range of thread sizes in a single fluid step that’s 15 times faster than by hand. Made with an oversized shank and hardened high-speed steel, the drill taps in these sets are built to handle the high torque of your impact wrench to cut material quickly. A built-in pilot starts the hole while the taper chamfer gradually engages material for clean, accurate threads. Your wrench’s rapid hammering helps break and clear chips as you cut, so you don’t need to pause and reverse. This also means these drill taps are less likely to jam on chips and snap. They’re a great choice for quickly preparing threaded through holes in thin materials.

Cut the cleanest, quickest threads in a range of sizes without ever stopping for chips. Made with an oversized shank and hardened high-speed steel, the taps in these sets are built to handle the high torque of impact wrenches for smooth, continuous cutting. The rapid hammering breaks up chips and spiral flutes pull them out of the hole, so you never have to pause and reverse to clear them. They can thread both blind and through holes 15 times faster than by hand. They’re a good choice for threading large holes and working with hard metals.

You’ll need a VersaDrive chuck (sold separately) to install these taps into your impact wrench.

Cut a range of hole sizes two times faster than power drills, then thread them 15 times faster than by hand. Made with an oversized shank and hardened high-speed steel, the tools in these sets are built to handle the high torque of impact wrenches without snapping. The drill bits have a built-in pilot with a stepped tip that centers the bit, prevents slipping, and drills with one third the pressure of standard bits. Your wrench’s rapid hammering keeps the taps moving forward for smooth, continuous cutting. Those rapid blows also help break and clear chips as you cut, so you don’t need to pause and reverse, even in large holes and tough materials. Since your wrench absorbs kickback, it won’t fight you when a cutting tool snags, reducing wrist strain and fatigue over long jobs.

You’ll need a VersaDrive chuck (sold separately) to install the bits and taps into your impact wrench. You can also get chucks for impact drivers and magnetic-base drills (both sold separately). For jobs that don’t require the torque of an impact tool, you can fit these drill bits and taps directly into a _1/2" chuck on a standard power drill.

With everything but the impact wrench, these sets are the fastest way to prepare holes with a hand tool. They include a selection of cutting tools and a chuck that lets you swap them in and out of your impact wrench. Made with hardened steel, the cutting tools are built to handle the high torque of the wrench without snapping, even in hard metals. This also means the bits cut holes two times faster than with a power drill, and the taps thread holes 15 times faster than with a tap wrench. The rapid hammering breaks and clears chips as you work to prevent jams. Since your wrench absorbs kickback, it won’t fight you if a cutting tool snags, reducing wrist strain and fatigue over long jobs.

The chucks hold any tool with a VersaDrive hex shank—including countersinks and extractors—so just one chuck and wrench handle any cutting task.

Cut the cleanest, quickest threads without ever stopping for chips. Made with an oversized shank and hardened high-speed steel, these taps are built to handle the high torque of impact wrenches for smooth, continuous cutting. The rapid hammering breaks up chips and spiral flutes pull them out of the hole, so you never have to pause and reverse to clear them. They can thread both blind and through holes 15 times faster than by hand. They’re a good choice for threading large holes and working with hard metals.

You’ll need a VersaDrive chuck (sold separately) to install these taps into your impact wrench.