1/8"-27 Taps | McMaster-Carr

Cut and repair threads and drill holes in many different sizes. Tap and die wrenches are included. The dies are hex shaped for use with conventional wrenches. The taps are made of carbon steel and are recommended for thread repair and occasional tapping.

Taper Chamfer—Taper chamfer taps have 7-10 chamfered threads at the tip for cutting into the workpiece. They require less torque than other chamfer types, making them a good choice for starting threads and tapping through holes. However, a longer taper means that they cannot thread as close to the bottom of closed-end holes.

Plug Chamfer—Plug chamfer taps are a versatile choice for most tapping applications. With 3-5 chamfered cutting threads, they require moderate torque and are often used for start-to-finish tapping of through holes and closed-end holes. However, they do not start threads as easily as taper chamfers. When using them to tap closed-end holes, be sure to leave sufficient space at the bottom for chips to accumulate.

	Drill Bit Sizes Included	Container Type	Includes	Tap Chamfer Type	Mfr.		Each
Carbon Steel







	Right-Hand Thread

	117	4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/8"-28, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, M3 × 0.50 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.00 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, M12 × 1.75 mm	4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/8"-28, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, M3 × 0.50 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.00 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, M12 × 1.75 mm	5/64", 7/64", 5/32", 1/4", 19/64", 5/16", 21/64", 3/8", 25/64", 13/32", 27/64", 29/64", 43 ga., 39 ga., 36 ga., 30 ga., 29 ga., 25 ga., 21 ga., 20 ga., 16 ga., 9 ga., 7 ga., 3 ga., B, F, H, I, J, O, Q, R, S, U, Z	Plastic Case	Die Wrench (2), Extractor (5), Tap Wrench (3), Thread Gauge (2)	Taper, Plug	Black & Decker	82955A11	0000000

Tap and Die Sets

Use a single set for many sizes of internal and external threads. The taps and dies are for use on most metal and plastic.

Carbon Steel—Carbon steel taps are for thread repair and occasional tapping.

High-Speed Steel—High-speed steel taps and dies last longer than carbon steel when used on similar material.

Plug Chamfer—Plug-chamfer taps are a versatile choice for most tapping applications. With 3-5 chamfered cutting threads, they require moderate torque and are often used for start-to-finish tapping of through holes and closed-end holes. However, they do not start threads as easily as taper-chamfer taps. When using them to tap closed-end holes, be sure to leave sufficient space at the bottom for chips to accumulate.

Taper Chamfer—Taper-chamfer taps have 7-10 chamfered threads at the tip for cutting into the workpiece. They require less torque than other chamfer types, making them a good choice for starting threads and tapping through holes. However, a longer taper means that they cannot thread as close to the bottom of closed-end holes.

Hex—Hex-shaped dies are for thread repair and can be used with conventional wrenches.

	Die Shape	Die Sizes Included	Wd.	Container Type	Includes	Mfr.		Each
Carbon Steel Taps and Dies







	Right-Hand Thread

	24	1/8"-27, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20	Plug, Taper	Hex	1/8"-27, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20	1"	Plastic Case	Die Wrench, Tap Wrench	Black & Decker	2631A5	0000000


	40	4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20	Plug, Taper	Hex	4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20	5/8", 1"	Plastic Case	Die Wrench (2), Tap Wrench (3), Thread Gauge	Black & Decker	2625A12	000000
	40	6-32, 8-32, 10-24, 1/8"-27, 1/4"-20, 5/16"-18, 3/8"-16, 7/16"-14, 1/2"-13, M4 × 0.75 mm, M5 × 0.80 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M12 × 1.75 mm	Plug, Taper	Hex	6-32, 8-32, 10-24, 1/8"-27, 1/4"-20, 5/16"-18, 3/8"-16, 7/16"-14, 1/2"-13, M4 × 0.75 mm, M5 × 0.80 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M12 × 1.75 mm	5/8", 1"	Plastic Case	Die Wrench (2), Tap Wrench (3), Thread Gauge	Black & Decker	2668A36	000000
	53	6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18, 3/4"-10, 3/4"-16, 1/4"-18	Plug, Taper	Hex	6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/4"-18, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18, 3/4"-10, 3/4"-16	1", 1 7/16"	Plastic Case	Die Wrench (2), Screwdriver, Tap Wrench (3), Thread Gauge	Black & Decker	25955A6	000000
	65	4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18, 3/4"-10, 3/4"-16, 7/8"-9, 7/8"-14, 1"-8, 1"-14, 1/4"-18	Plug, Taper	Hex	4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/4"-18, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18, 3/4"-10, 3/4"-16, 7/8"-14, 7/8"-9, 1"-8, 1"-14	5/8", 1", 1 7/16", 1 13/16"	Plastic Case	Die Wrench (4), Tap Wrench (4), Thread Gauge	Black & Decker	26075A71	000000


	High-Speed Steel Taps and Dies







					Right-Hand Thread

					40	4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20	Plug	Hex	4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20	1"	Plastic Case	Die Wrench, Screwdriver, Tap Wrench (3), Thread Gauge	Viking Norseman Drill	26055A64	000000


					58	6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18, 3/4"-10, 3/4"-16, 1/4"-18	Plug	Hex	6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/4"-18, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18, 3/4"-10, 3/4"-16	1", 1 7/16"	Plastic Case	Die Wrench (2), Extractor (5), Screwdriver, Tap Wrench (3), Thread Gauge	Viking Norseman Drill	26055A74	000000

Impact Wrench Pipe and Conduit Taps

Cut threads inside pipe and conduit 15 times faster than by hand. Made with an oversized shank and hardened high-speed steel, these taps are built to handle the high torque of impact wrenches to cut material quickly. Your wrench’s rapid hammering keeps these taps moving forward for smooth, continuous cutting. Those rapid blows also help break and clear chips as you cut, so you don’t need to pause and reverse, even in large holes and tough materials. This also means the tap is less likely to jam on chips and snap.

You’ll need a VersaDrive chuck (sold separately) to install these taps into your impact wrench. You can also get chucks for impact drivers (sold separately).

NPT Thread About NPT Thread

Titanium Nitride (TiN) Coated—Run at higher speeds and last twice as long as uncoated taps.

Taper Chamfer—Good for both starting holes and threading through holes. These taps have the longest taper to gradually engage with the material, reducing the force needed to turn them. They can't reach the bottom of blind holes, however, so you will likely need to finish with a bottoming-chamfer tap.

							Drill Bit		Shank			Taper Chamfer
	Pipe Size	Thread Size	Thread Lg.	Overall Lg.	No. of Flutes	Threads per In.	Size	Decimal Size Equiv.	Type	Size	Mfr.		Each
Hardened High-Speed Steel







				Titanium Nitride (TiN) Coated

				1/8	1/8"-27	3/4"	2 3/4"	4	27	Q	0.3320"	VersaDrive Hex	7/16"	Heli-Coil	9614N11	000000

Accessories for Taps

Required Chucks

Quick-Change

Strong-Hold

These chucks mount directly onto the square drive of your impact wrench. They work with any tool with a VersaDrive hex shank, so you don’t need to swap chucks to use drill bits, reamers, and other tools.

Quick-Change Pull-Back Tool Release—Require just one hand to load. Push your tool in the chuck until you hear the ball detents click into place. To remove your tool, pull back the collar.

Strong-Hold Push-Forward Tool Release—Hold cutting tools more securely than quick-change chucks. To insert and remove cutting tools, you must push a collar forward. Since impact force drives your cutting tool the opposite way, it can’t come loose from the chuck while you work.

Manganese Phosphate-Coated Steel—The coating on these chucks prevents rust.

	For Shank
For Square Drive Size	Type	Size	Overall Lg.	Material	Includes		Each







			Quick-Change Pull-Back Tool Release

			1/2"	VersaDrive Hex	7/16"	2 5/32"	Black-Oxide Steel	Retaining Ring, Retention Pin	9589N112	000000




					Strong-Hold Push-Forward Tool Release

					3/8"	VersaDrive Hex	7/16"	2"	Manganese Phosphate-Coated Steel	Retaining Ring, Retention Pin	9589N111	000000


					1/2"	VersaDrive Hex	7/16"	2 5/32"	Manganese Phosphate-Coated Steel	Retaining Ring, Retention Pin	9589N113	000000
					3/4"	VersaDrive Hex	7/16"	2 3/8"	Manganese Phosphate-Coated Steel	Retaining Ring, Retention Pin	9589N114	000000

Optional Extensions

Extend your cutting tool’s reach. These extensions attach to your chuck and accept any tool with a VersaDrive hex shank.

		For Shank		Shank
	Overall Lg.	Type	Size	Type	Size	OD	Material		Each
Quick-Change Pull-Back Tool Release



		5"	VersaDrive Hex	7/16"	VersaDrive Hex	7/16"	1 7/64"	Black-Oxide Steel	9589N115	000000


		12"	VersaDrive Hex	7/16"	VersaDrive Hex	7/16"	1 7/64"	Black-Oxide Steel	9589N116	00000