McMaster-Carr logo
    Filter by
    System of Measurement
    Thread Size
    Industrial Info Compare
    Chamfer Type
    Thread Type
    Industrial Info Compare
    Thread Direction
    Industrial Info Compare
    For Hole Type
    Number of Pieces
    Pipe Size
    Industrial Info Compare
    Number of Flutes
    Pitch Diameter Limit
    Attribute Image
    Shank Type
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    Shape
    DFARS Specialty Metals
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    46 Products

    Taps

    Image of Product. Front orientation. Taps. Taps.
    Cut threads into holes so screws, bolts, and rods fit snugly. Our basic taps have straight flutes that are good for most jobs.
    High-Speed Steel—The most versatile taps resist heat and wear to stay sharp. They’re good for most metals and plastic.
    Cobalt Steel—These taps resist higher temperatures and and last twice as long as high-speed steel taps. They thread hard materials such as iron and hardened steel without damaging their cutting edges.
    Carbon Steel—The economical choice for occasional hand tapping. These work on most metals and plastic but will dull more quickly than other taps.
    Uncoated—The economical choice, these won't last as long as coated taps.
    Titanium Nitride (TiN) Coated—Run at higher speeds and last twice as long as uncoated taps.
    Titanium Carbon Nitride (TiCN) Coated—Resist heat, chipping, and wear for three times the life of uncoated taps.
    Taper Chamfer—Good for both starting holes and threading through holes. These taps have the longest taper to gradually engage with the material, reducing the force needed to turn them. They can't reach the bottom of blind holes, however, so you will likely need to finish with a bottoming-chamfer tap.
    Plug Chamfer—Our go-to chamfer type, these thread both through holes and blind holes. The tapered section is shorter than a taper chamfer and longer than bottoming chamfer. As a result, they're easier to turn than bottoming taps but require more force than taper taps.
    Bottoming Chamfer—Cut all the way to the bottom of blind holes with taps that have the shortest taper. Since these require the most force to turn, they’re often used to finish holes started by taper- or plug-chamfer taps.
    Number of Flutes—Taps with fewer flutes have more space to capture chips, so you won’t have to clear them as often. However, they can be more difficult to keep straight in the hole.
    Taps Sold as Sets—Include one tap of each chamfer type.
    Taps
    Taps Sold as Sets
    Drill Bit
    Taper Chamfer
    Plug Chamfer
    Bottoming
    Chamfer
    Thread
    Size
    Thread
    Lg.
    Overall
    Lg.
    Thread
    Type
    No. of
    Flutes
    Size
    Decimal Size
    Equiv.
    Shank
    Type
    Each
    Each
    Each
    No. of
    Taps
    Each
    High-Speed Steel
     
    Uncoated
    1"-8
    		2 1/2"5 1/8"UNC
    		47/8"
    		0.875"Square2521A5810000002521A6310000002521A65100000032521A7810000000
     
    Titanium Nitride (TiN) Coated
    1"-8
    		2 1/2"5 1/8"UNC
    		47/8"
    		0.875"Square2636A370000002636A570000002636A7700000032636A97000000
     
    Titanium Carbon Nitride (TiCN) Coated
    1"-8
    		2 1/2"5 1/8"UNC
    		47/8"
    		0.875"Square26545A13800000026545A5900000026545A168000000326545A198000000
     
    Cobalt Steel
     
    Uncoated
    1"-8
    		2 1/2"5 1/8"UNC
    		47/8"
    		0.875"Square———02662A51000000———0————0
     
    Titanium Nitride (TiN) Coated
    1"-8
    		2 1/2"5 1/8"UNC
    		47/8"
    		0.875"Square———02662A83000000———0————0
     
    Carbon Steel
     
    Uncoated
    1"-8
    		2 1/2"5 1/8"UNC
    		47/8"
    		0.875"Square26035A1320000026035A1660000026035A18900000————0
     

    Tap Sets

    These sets include a variety of taps for threading holes so screws, bolts, and rods fit snugly.
    High-Speed Steel—Single Thread Size Sets
    Image of Product. Taper, Plug, and Bottoming Chamfer Set. Front orientation. Taps. Tap Sets, Single Tap Thread Size.

    Taper, Plug, and Bottoming

    Chamfer Set

    The most versatile taps resist heat and wear to stay sharp. They’re good for most metals and plastic. These sets include one of each chamfer type: Taper for starting holes and threading through holes; plug for through holes and blind holes; and bottoming for cutting the closest to the bottom of any hole.
    Uncoated—The economical choice, these won't last as long as coated taps.
    Titanium Nitride (TiN) Coated—Run at higher speeds and last twice as long as uncoated taps.
    Titanium Carbon Nitride (TiCN) Coated—Resist heat, chipping, and wear for three times the life of uncoated taps.
    Taper Chamfer, Plug
    Chamfer, Bottoming Chamfer
    No. of
    Pieces
    Thread
    Size
    Thread
    Type
    Container
    Type
    No. of
    Flutes
    Shank
    Type
    Each
    Uncoated
    31"-8
    		UNC
    		Plastic Case4Square2521A7810000000
     
    Titanium Nitride (TiN) Coated
    31"-8
    		UNC
    		Plastic Case4Square2636A97000000
     
    Titanium Carbon Nitride (TiCN) Coated
    31"-8
    		UNC
    		Plastic Case4Square26545A198000000
     
    Carbon Steel—Single Thread Size Sets
    Image of Product. Taper, Plug, and Bottoming Chamfer Set. Front orientation. Taps. Tap Sets, Single Tap Thread Size.

    Taper, Plug, and Bottoming

    Chamfer Set

    The economical choice for occasional hand tapping. These work on most metals and plastic but will dull more quickly than other taps. Sets include one each chamfer type: Taper for starting holes and through holes; plug for through holes and blind holes; and bottoming for cutting the closest to the bottom of any hole.
    Taper Chamfer, Plug
    Chamfer, Bottoming Chamfer
    No. of
    Pieces
    Thread
    Size
    Thread
    Type
    Container
    Type
    No. of
    Flutes
    Shank
    Type
    Each
    Uncoated
    31"-8
    		UNC
    		Plastic Case4Square26035A362000000
     
    Carbon Steel—Multiple Thread Size Sets
    Image of Product. Plug Chamfer Set. Front orientation. Taps. Tap Sets, Multiple Tap Thread Sizes.

    Plug Chamfer Set

    The economical choice for occasional hand tapping. These work on most metals and plastic but will dull more quickly than other taps. Sets include multiple sizes of plug chamfer taps for through holes and blind holes.
    Taper Chamfer, Plug
    Chamfer, Bottoming Chamfer
    No. of
    Pieces
    Thread Size
    Thread
    Type
    Container
    Type
    Shank
    Type
    Each
    Uncoated
    603 each of sizes 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20,
    1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18, 3/4"-10, 3/4"-16, 7/8"-9, 7/8"-14, 1"-8, and 1"-12    		UNF, UNC
    		Plastic CaseSquare2688A110000000
     

    Tap and Die Sets

    Image of Product. Front orientation. Tap and Die Sets.
    Use a single set for many sizes of internal and external threads. The taps and dies are for use on most metal and plastic.
    Carbon Steel—Carbon steel taps are for thread repair and occasional tapping.
    Plug Chamfer—Plug-chamfer taps are a versatile choice for most tapping applications. With 3-5 chamfered cutting threads, they require moderate torque and are often used for start-to-finish tapping of through holes and closed-end holes. However, they do not start threads as easily as taper-chamfer taps. When using them to tap closed-end holes, be sure to leave sufficient space at the bottom for chips to accumulate.
    Taper Chamfer—Taper-chamfer taps have 7-10 chamfered threads at the tip for cutting into the workpiece. They require less torque than other chamfer types, making them a good choice for starting threads and tapping through holes. However, a longer taper means that they cannot thread as close to the bottom of closed-end holes.
    Hex—Hex-shaped dies are for thread repair and can be used with conventional wrenches.
    No. of
    Pieces
    Tap Sizes Included
    Tap Chamfer
    Type
    Die
    Shape
    Die Sizes Included
    Wd.
    Container
    Type
    Includes
    Each
    Carbon Steel Taps and Dies
     
    Right-Hand Thread
    654-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18, 3/4"-10, 3/4"-16, 7/8"-9, 7/8"-14, 1"-8, 1"-14, 1/4"-18Plug, TaperHex4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/4"-18, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18, 3/4"-10, 3/4"-16, 7/8"-14, 7/8"-9, 1"-8, 1"-145/8", 1", 1 7/16", 1 13/16"Plastic CaseDie Wrench (4), Tap Wrench (4), Thread Gauge26075A710000000
     

    Chip-Clearing Taps for Steel and Stainless Steel

    Image of ProductInUse. Front orientation. Contains Annotated. Taps. Chip-Clearing Taps for Steel and Stainless Steel, Spiral-Point Flute for Through Holes.

    Spiral-Point Flute for Through Holes

    Image of ProductInUse. Front orientation. Contains Annotated. Taps. Chip-Clearing Taps for Steel and Stainless Steel, Spiral Flute for Blind Holes.

    Spiral Flute for Blind Holes

    Made of a high-vanadium alloy, these taps are harder and more wear-resistant than other high-speed steel taps. The flute design prevents buildup to protect the quality of the threads and avoid damage to the tap. Since you don’t need to reverse these taps to extract chips, they also create threads faster.
    High-Speed Steel—The most versatile taps resist heat and wear to stay sharp. They’re good for most metals and plastic.
    Black Oxide—The dark finish increases wear resistance and reduces friction to improve chip flow, so these taps can last 50% longer than uncoated taps.
    Spiral-Point Flute for Through Holes—Push chips ahead of the tap and out of through holes. Also known as gun taps.
    Spiral Flute for Blind Holes—Pull chips back toward the tap so they won't build up in blind holes. When tapping brittle material like iron that creates fine or powdery debris, choose a straight-flute tap.
    Plug Chamfer—Our go-to chamfer type. With a longer taper than a bottoming chamfer, they are easier to turn but won't thread as close the bottom of a hole.
    Bottoming Chamfer—These taps have the shortest taper to thread close to the bottom of blind holes. They require the most force to turn, so they’re often used to finish holes started by plug-chamfer taps.
    Drill Bit
    Spiral-Point Flute
    for Through Holes
    Spiral Flute for Blind Holes
    Thread
    Size
    Thread
    Lg.
    Overall
    Lg.
    Thread
    Type
    Size
    Decimal Size
    Equiv.
    Shank
    Type
    Chamfer
    Type
    No. of
    Flutes
    Each
    Chamfer
    Type
    No. of
    Flutes
    Each
    High-Speed Steel
     
    Black Oxide
    1"-8
    		1 1/2"5 1/8"UNC
    		7/8"
    		0.875"SquarePlug32684A820000000Bottoming427055A620000000
     

    Tap Extractor Sets for Screw Thread Taps

    Image of Product. Front orientation. Tap Extractors. Tap Extractor Sets for Screw Thread Taps.
    To extract taps of different sizes, these sets include multiple extractors. Fingers on the extractor grip the flutes on a broken tap. Use with a tap wrench to remove taps with straight flutes from the workpiece.
    No. of
    Pieces
    For Three-Flute Tap Size
    For Four-Flute Tap Size
    Material
    Container
    Type
    For Number
    of Tap Flutes
    Each
    11No. 5, No. 6, 1/8", M3, M3.5
    		No. 8, No. 10, No. 12, No. 14, 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 15/32", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", M4, M4.5, M5, M5.5, M6, M6.3, M7, M8, M9, M10, M11, M12, M12.5, M14, M16, M18, M19, M20, M22, M24, M25Steel
    		Plastic Case3, 42561A4240000000
    15No. 4, No. 5, No. 6, 1/8", M3, M3.5
    		No. 8, No. 10, No. 12, No. 14, 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 15/32", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", M2, M4, M4.5, M5, M5.5, M6, M6.3, M7, M8, M9, M10, M11, M12, M12.5, M14, M16, M18, M19, M20, M22, M24, M25Steel
    		Plastic Case3, 42561A426000000

    Chip-Clearing Taps

    Image of ProductInUse. Front orientation. Taps. Chip-Clearing Taps, Spiral-Point Flute for Through Holes.

    Spiral-Point Flute for Through Holes

    Remove long, stringy chips to produce cleaner threads than standard taps. The flute design prevents buildup to protect the quality of the threads and avoid damage to the tap. Since you don’t need to reverse these taps to extract chips, they also create threads faster.
    High-Speed Steel—The most versatile taps resist heat and wear to stay sharp. They’re good for most metals and plastic.
    Uncoated—The economical choice, these won't last as long as coated taps.
    Titanium Nitride (TiN) Coated—Run at higher speeds and last twice as long as uncoated taps.
    Titanium Carbon Nitride (TiCN) Coated—Resist heat, chipping, and wear for three times the life of uncoated taps.
    Spiral-Point Flute for Through Holes—Push chips ahead of the tap and out of through holes. Also known as gun taps.
    Plug Chamfer—Our go-to chamfer type. With a longer taper than a bottoming chamfer, they are easier to turn but won't thread as close the bottom of a hole.
    Drill Bit
    Spiral-Point Flute
    for Through Holes
    Thread
    Size
    Thread
    Lg.
    Overall
    Lg.
    Thread
    Type
    Size
    Decimal Size
    Equiv.
    Shank
    Type
    Chamfer
    Type
    No. of
    Flutes
    Each
    High-Speed Steel
     
    Uncoated
    1"-8
    		2 1/2"5 1/8"UNC
    		7/8"
    		0.878"SquarePlug325705A170000000
     
    Titanium Nitride (TiN) Coated
    1"-8
    		2 1/2"5 1/8"UNC
    		7/8"
    		0.878"SquarePlug32703A152000000
     
    Titanium Carbon Nitride (TiCN) Coated
    1"-8
    		2 1/2"5 1/8"UNC
    		7/8"
    		0.878"SquarePlug32703A122000000
     

    Left-Hand Thread Taps

    Image of Product. Front orientation. Taps. Left-Hand Thread Taps.
    Create left-hand threads that prevent counter-clockwise rotating parts, such as flywheels and propellers, from loosening and spinning off. These taps have straight flutes that are good for most jobs.
    High-Speed Steel—The most versatile taps resist heat and wear to stay sharp. They’re good for most metals and plastic.
    Uncoated—The economical choice, these won't last as long as coated taps.
    Taper Chamfer—Good for both starting holes and threading through holes. These taps have the longest taper to gradually engage with the material, reducing the force needed to turn them. They can't reach the bottom of blind holes, however, so you will likely need to finish with a bottoming-chamfer tap.
    Plug Chamfer—Our go-to chamfer type, these thread both through holes and blind holes. The tapered section is shorter than a taper chamfer and longer than bottoming chamfer. As a result, they're easier to turn than bottoming taps but require more force than taper taps.
    Bottoming Chamfer—Cut all the way to the bottom of blind holes with taps that have the shortest taper. Since these require the most force to turn, they’re often used to finish holes started by taper- or plug-chamfer taps.
    Taps Sold as Sets—Include one tap of each chamfer type.
    Taps
    Taps Sold as Sets
    Drill Bit
    Taper Chamfer
    Plug Chamfer
    Bottoming
    Chamfer
    Thread
    Size
    Thread
    Lg.
    Overall
    Lg.
    Thread
    Type
    No. of
    Flutes
    Size
    Decimal Size
    Equiv.
    Shank
    Type
    Each
    Each
    Each
    No. of
    Taps
    Each
    High-Speed Steel
     
    Uncoated
    1"-8
    		2 1/2"5 1/8"UNC
    		47/8"
    		0.875"Square2584A650000002584A430000002584A8700000032584A3520000000
     

    Acme Thread Taps

    Image of Product. Front orientation. Taps. Acme Thread Taps.
    Create the broad Acme threads found on lead screw nuts, linear actuators, vises, and other moving components. These taps have two sets of chamfered threads: the first for cutting a rough profile and the second for finishing it. They’re only for through holes since the two different threads can damage the workpiece if you reverse the tap. Once done threading, release the tap from the holder and remove it from the other side of the hole. Also known as tandem taps.
    High-Speed Steel—These taps resist heat and wear to stay sharp.
    Drill Bit
    Thread
    Size
    Thread
    Lg.
    Overall
    Lg.
    Thread
    Type
    No. of
    Flutes
    Size
    Decimal Size
    Equiv.
    Shank
    Type
    Each
    High-Speed Steel
     
    Uncoated
    1"-8
    		5 1/4"10 1/8"Acme
    		47/8"
    		0.875"Square25345A960000000
     

    Long-Reach Taps

    Image of Product. Front orientation. Taps. Long-Reach Taps.
    Thread holes that are hard to access or where obstructions make it difficult to turn a tap wrench. About twice as long other taps, these get you inside machines or through assemblies such as pulleys and belts. They have straight flutes that are good for most jobs.
    High-Speed Steel—The most versatile taps resist heat and wear to stay sharp. They’re good for most metals and plastic.
    Taper Chamfer—Good for both starting holes and threading through holes. These taps have the longest taper to gradually engage with the material, reducing the force needed to turn them. They can't reach the bottom of blind holes, however, so you will likely need to finish with a bottoming-chamfer tap.
    Plug Chamfer—Our go-to chamfer type, these thread both through holes and blind holes. The tapered section is shorter than a taper chamfer and longer than bottoming chamfer. As a result, they're easier to turn than bottoming taps but require more force than taper taps.
    Drill Bit
    Shank
    Taper Chamfer
    Plug Chamfer
    Thread
    Size
    Thread
    Lg.
    Overall
    Lg.
    Thread
    Type
    No. of
    Flutes
    Size
    Decimal Size
    Equiv.
    Type
    Dia.
    Each
    Each
    High-Speed Steel
     
    Uncoated
    1"-8
    		4"11"UNC
    		47/8"
    		0.875"Square0.834"2582A51500000002583A190000000
     

    Left-Hand Acme Thread Taps

    Image of Product. Front orientation. Taps. Left-Hand Acme Thread Taps.
    Prevent counter-clockwise rotating parts from loosening and spinning off. These taps thread holes to mate with left-hand Acme fasteners that secure components like lead screw nuts and linear actuators. They have two sets of chamfered threads: the first for cutting a rough profile and the second for finishing it. They’re only for through holes since the two different threads can damage the workpiece if you reverse the tap. Once done threading, release the tap from the holder and remove it from the other side of the hole. Also known as tandem taps.
    High-Speed Steel—These taps resist heat and wear to stay sharp.
    Drill Bit
    Thread
    Size
    Thread
    Lg.
    Overall
    Lg.
    Thread
    Type
    No. of
    Flutes
    Size
    Decimal Size
    Equiv.
    Shank
    Type
    Each
    High-Speed Steel
     
    Uncoated
    1"-8
    		5 1/4"10 1/8"Acme
    		47/8"
    		0.875"Square25345A970000000
     

    Helical Insert Taps

    Image of Product. Front orientation. Taps. Helical Insert Taps.
    Match the size of helical inserts so they fit tightly when installed in the hole.
    High-Speed Steel—These taps resist heat and wear to stay sharp.
    Plug Chamfer—Our go-to chamfer type. With a longer taper than a bottoming chamfer, they are easier to turn but won't thread as close the bottom of a hole.
    Bottoming Chamfer—Cut all the way to the bottom of blind holes with taps that have the shortest taper. Since these require the most force to turn, they’re often used to finish holes started by taper- or plug-chamfer taps.
    Drill Bit
    Plug Chamfer
    Bottoming
    Chamfer
    For Insert
    Size
    Thread
    Lg.
    Overall
    Lg.
    For Insert
    Thread Type
    No. of
    Flutes
    Size
    Decimal Size
    Equiv.
    Shank
    Type
    Each
    Each
    High-Speed Steel
     
    Uncoated
    1"-8
    		2 9/16"5 3/4"UNC
    		41 1/32"
    		1.0313"Square91709A115000000091709A4910000000
     

    Left-Hand Thread Tap Sets

    Image of Product. Front orientation. Taps. Left-Hand Thread Tap Sets.
    Three chamfer types in one set create a snug fit with left-hand fasteners that secure counter-clockwise rotating parts. Left-hand threads keep components such as flywheels and propellers from loosening and spinning off. These taps have straight flutes that are good for most jobs.
    High-Speed Steel—Single Thread Size Sets
    The most versatile taps resist heat and wear to stay sharp. They’re good for most metals and plastic. These sets include one of each chamfer type: Taper for starting holes and threading through holes; plug for through holes and blind holes; and bottoming for cutting the closest to the bottom of any hole.
    Uncoated—The economical choice, these won't last as long as coated taps.
    Taper Chamfer, Plug
    Chamfer, Bottoming Chamfer
    No. of
    Pieces
    Thread
    Size
    Thread
    Type
    No. of
    Flutes
    Shank
    Type
    Each
    Uncoated
    31"-8
    		UNC
    		4Square2584A3520000000
     

    Tap Extractors for Screw Thread Taps

    Image of Product. Front orientation. Tap Extractors. Tap Extractors for Screw Thread Taps.
    Fingers on the extractor grip the flutes on a broken tap. Use with a tap wrench to remove taps with straight flutes from the workpiece without damaging the surrounding threads.
    Tap Extractors
    Replacement Tap Extractor Fingers
    For Tap
    Size
    Material
    Square Shank
    Size
    Choose a Number
    of Tap Flutes
    Each
    Choose a Number
    of Tap Flutes
    Pkg.
    Qty.
    Pkg.
    1", M24, M25
    		Steel
    		0.6"3, 42561A5410000003, 412561A56500000

    Helical Threaded Inserts with Installation Tools

    Image of Product. Drill Bit, Installation Tool and Through-Hole Tap. Front orientation. Threaded Inserts. Helical Threaded Inserts with Installation Tools, Pronged, Installation Tool, Through-Hole Tap, Drill Bit.

    Drill Bit, Installation Tool

    and Through-Hole Tap

    Quickly restore stripped threads—these inserts come with through-hole taps and installation tools. The tough coils on these inserts expand once installed to anchor in a tapped hole.
    Pronged—The prong attaches to an installation tool for precise control as you drive inserts in. Remove the prong with a punch or break-off tool before inserting a screw.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these inserts resist rust and mild chemicals.
    Thread
    Size
    Installed
    Lg.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    No. of Inserts
    Included
    Includes
    Each
    Pronged
     
    18-8 Stainless Steel
    1"-8
    		1.500"1 1/32"
    		1.031"6Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A3210000000
     

    CAT Taper Compensating Tap Collet Holders

    Image of System. Front orientation. Exploded view. Contains Annotated. Tap Collet Holders. CAT Taper Compensating Tap Collet Holders .
    Image of System. Side1 orientation. Exploded view. Contains Annotated. Tap Collet Holders. CAT Taper Compensating Tap Collet Holders .
    Image of Attribute. Side1 orientation. Contains Annotated. CAT Taper Compensating Tap Collet Holders .
    Image of Specification. Side1 orientation. ZoomedIn view. Contains Annotated. For Tang Drives.
    Produce clean, accurate threads by reducing stress on your taps. These holders work with CAT taper CNC machines that don’t support rigid tapping. Also called tension and compression tap holders, they compress as the tap enters material and extend as it backs out, compensating for small spindle and feed rate mismatches. Not only does this protect the tap but also the threads you just cut. They’re often used when tapping through and blind holes with spiral-point and spiral-flute taps.
    Their hardened steel shank resists wear. It’s also precision ground to the industry standard AT3 tolerance for a secure fit that minimizes runout in your machine spindle. They meet ANSI/ASME standards for CAT spindles to ensure compatibility. They have a threaded hole that accepts retention knobs, so they connect to your machine’s drawbar system.
    Use these holders with tang-drive quick-change tap collets (also known as Bilz-style tap adapters) to swap taps in seconds and limit machine downtime. They are not compatible with ball-drive quick-change tap collets.
    For the best performance, select a quick-change collet size that places your tap near the middle of the listed tap size range.
    For Tap
    Lg.
    For Quick-Change
    Tap Collet Size
    Size
    Pipe Size
    Extended
    Compressed
    Projection
    Body
    Dia.
    Total Indicated Runout
    (TIR) Accuracy
    Material
    Specs.
    Met
    For Drive
    Type
    Each
    CAT 50 Taper
    ANSI 1No. 0 to 9/16"
    M1.6 to M14    		1/8
    		2.91"2.56"2 3/4"1 1/2"0.0001"Hardened SteelASME B5.50Tang8966N140000000
    ANSI 25/16" to 7/8"
    M7 to M22    		1/4 to 1/23.98"3.39"3 3/4"2 1/8"0.0001"Hardened SteelASME B5.50Tang8966N15000000
    ANSI 31/2" to 1 3/8"
    M12 to M33    		3/8 to 16.3"5.36"5 7/8"3 1/8"0.0001"Hardened SteelASME B5.50Tang8966N16000000
     

    CAT Taper Rigid Tap Collet Holders

    Image of System. Front orientation. Exploded view. Contains Annotated. Tap Collet Holders. CAT Taper Rigid Tap Collet Holders .
    Image of System. Side1 orientation. Exploded view. Contains Annotated. Tap Collet Holders. CAT Taper Rigid Tap Collet Holders .
    Image of Specification. Side1 orientation. ZoomedIn view. Contains Annotated. For Tang Drives.
    Hold quick-change tap collets on CAT taper CNC machines capable of rigid tapping. These holders are rigid, so they move your tap in perfect sync with your machine's spindle speed and feed rate without any flex or compensation.
    The hardened steel shank resists wear. It’s also precision ground to the industry standard AT3 tolerance for a secure fit that minimizes runout in your machine spindle. They meet ANSI/ASME standards for CAT spindles to ensure compatibility. They have a threaded hole that accepts retention knobs, so they connect to your machine’s drawbar system.
    Use these holders with tang-drive quick-change tap collets (also known as Bilz-style tap adapters) to swap taps in seconds and limit machine downtime. They are not compatible with ball-drive quick-change tap collets or quick-change tap collets with torque control.
    For the best performance, select a quick-change collet size that places your tap near the middle of the listed tap size range.
    For Tap
    For Quick-Change
    Tap Collet Size
    Size
    Pipe Size
    Projection
    Body
    Dia.
    Total Indicated Runout
    (TIR) Accuracy
    Material
    Specs.
    Met
    For Drive
    Type
    Each
    CAT 50 Taper
    ANSI 1No. 0 to 9/16"
    M1.6 to M14    		1/8
    		2 7/8"1 1/4"0.0001"Hardened SteelASME B5.50Tang8968N140000000
    ANSI 25/16" to 7/8"
    M7 to M22    		1/4 to 1/23 3/4"2"0.0001"Hardened SteelASME B5.50Tang8968N15000000
    ANSI 31/2" to 1 3/8"
    M12 to M33    		3/8 to 14 3/4"2 7/8"0.0001"Hardened SteelASME B5.50Tang8968N16000000
     
    back to top