We will reply to your message within an hour.
Cut threads into most metal and plastic.
Use the extra-long shank to thread deep and hard-to-reach holes.
Tap threads for left-hand threaded fasteners.
Sized to cut oversized threads, these tools are often used to tap holes where the threads will shrink due to heat treatment or plating.
Often used for thread repair and occasional hand tapping, these carbon steel taps can thread holes in most metal and plastic, but they have a shorter tool life than standard taps.
Use these taps on hard and abrasive material, such as heat-treated metal, nickel, and fiberglass.
Keep chips clear while tapping. Also known as gun taps, these have spiral-point flutes that push chips ahead of the tap and out of through holes.
Clear chips while tapping deep and hard-to-reach holes. These taps have an extra-long shank for extended reach.
Create oversized threads while keeping chips clear. These taps are sized for use in holes where the threads will shrink due to heat treatment or plating.
The spiral flute design pulls chips back toward the tap, so chips won't accumulate in closed-end holes.
Also known as cold-forming and fluteless taps, these press threads into material without cutting it, so no chips are created.
With a drill bit point to drive into the workpiece, these taps can drill and tap holes in a single step. A 1/4" hex shank connects them directly to tools such as drills and power screwdrivers.
Insert these taps directly into drills, power screwdrivers, and other tools that accept a 1/4" hex shank.
Drill holes and cut threads without switching tools.
These taps are made of cobalt steel for higher strength and wear resistance than standard taps. Their flutes are designed to keep chips clear, so they don't need to be reversed to prevent buildup.
Tap threads into hardened steel and iron. These cobalt steel taps have straight flutes for high durability.
Coated with chromium carbide or titanium carbonitride (TiCN), these cobalt steel taps cut smoothly through soft material to produce accurate threads.
To tap nickel and other hard material, these cobalt steel taps have high cutting strength. Their flutes are designed to keep chips clear, so they don't need to be reversed to prevent buildup.
Create threads sized for pipe and conduit.
Form general purpose Acme threads.
Produce metric threads that meet Japanese Industrial Standards.
These taps are for use on most metal and plastic.
For start-to-finish tapping of left-hand threads, these sets include one taper-, one plug-, and one bottoming-chamfer tap.
Sets include multiple tap sizes for threading different hole diameters.
Multiple tap sizes allow tapping a range of hole diameters. Connect these taps directly to drills, power screwdrivers, and other tools that accept a 1/4" hex shank.
Drill and tap a variety of hole sizes. These taps and drill bits are for use on metal and plastic.
Also known as gun taps, the taps in these sets have spiral-point flutes that push chips ahead of the tap and out of through holes.
All taps and drill bits have a hex shank for direct connection to tools such as drills and power screwdrivers.
Drill and tap holes in a range of diameters. With a drill bit point to drive into the workpiece, these tools can drill and tap holes in a single step. Connect them directly to drills, power screwdrivers, and other tools that accept a 1/4" hex shank.
Use a single set for many sizes of internal and external threads. All sets include tap and die wrenches.
Cut and repair threads and drill holes in many different sizes. Tap and die wrenches are included.
Repair screw threads in a wide range of sizes.
Inserts come with a through-hole tap and installation tool.
Assortments include various sizes of helical inserts and a tap, a drill bit, and an installation tool for each thread size.