These lights cast a narrow beam of light. With a gooseneck arm, they are faster and easier to reposition than articulating-arm lights.

These lights cast a narrower beam than other gooseneck-arm machine lights. Reposition them faster and more easily than articulating-arm lights.

Gooseneck arms can be repositioned faster and more easily than articulating arms.

Shine light on machinery and through the sight glass on tanks to inspect food, brewery, chemical, pharmaceutical, and bio-tech processing lines.

Create a high-intensity lighting system for inspecting small and microscopic parts.

Keep excess cord out of the way—the reel locks the cord at any length and retracts it when not in use.

A series of bulb heads are attached to a power cord to provide overhead lighting for job sites.

A movable head lets you aim light where it’s needed most in areas that don't have electrical power service.

Because these lights are compatible with DeWalt rechargeable batteries, you can keep one type of cordless tool battery on hand. Their heads pivot to aim light where it's needed in areas that don't have electrical power service.

With a NEMA 4X rating, these lights resist degradation when exposed to corrosive liquids, withstand liquids sprayed during washdowns, and are dust tight.

The handle on this floodlight also acts as a stand—pivot it 360° to aim light where it's needed. This floodlight is small and easy to carry to job sites that don't have electrical power.

Rated IP65, these lights are sealed to protect against light washdowns from a garden hose. They have a height-adjustable stand and light heads that pivot up and down to direct light where it's needed.

Because these lights have a reflector, they distribute light more evenly than other portable lights.

With a slimmer profile than other strip machine lights, these lights fit in tight spots on workspaces and inside machinery because they don’t have a circuit board.

These classic-style machine lights have a reflector to distribute light more evenly than strip machine lights.

Mount these lights into a recessed opening on your machine—they sit flush against the surface for a streamlined appearance.

These low-profile lights stay out of sight when mounted under a cabinet. Use them to free up space on your work surface.

A wraparound lens disperses light from the sides as well as the bottom to produce ambient lighting.

Also known as strip or channel lights, the ends of these fixtures are designed to be wired together to create long rows of lights.

Also known as pendant lights, these fixtures hang from a cord.

Also known as troffers, these lights fit most standard drop-ceiling grids.

Fit traditional fluorescent ceiling strip lights with these LED lights, which use energy more efficiently, last longer, and produce less heat.

These lights mount to the wall so they're often used in enclosed spaces such as stairwells, hallways, and storage rooms.

Install sockets for medium (standard household) screw-in base light bulbs.

Use these lights in large, open areas such as warehouses and manufacturing spaces where the ceiling is up to 30-ft. high.

Suspend or mount with fasteners to the ceiling.

Mount lights in recessed spaces so the lens is flush with the wall.

Designed to withstand heat and grease, these lights are often used in commercial cooking hoods. They are also known as hood lights.

Mount these lights flush with ceilings in wet locations—all are sealed to keep out humidity and dripping, splashing, and falling liquids. Unlike recessed can lights, which require a separate housing, these fit directly into a cutout in your ceiling and are held in place by springs.

A wraparound lens disperses light from the sides as well as the bottom to produce ambient lighting.

Direct light where it’s needed with these pivoting-head flashlights. When plugged in, they’ll automatically light up if the power goes out.

Attach these tiny flashlights to a grease gun nozzle or air hose to shine light directly onto your work.

These flashlights are built to handle everyday use. They have a slip-resistant grip to ensure a secure hold.

Tilt the head on these flashlights to aim light exactly where it's needed. They have a flat bottom, so you can work hands-free without them rolling away.

Always have a flashlight on hand—these attach to a key ring.

In addition to pivoting 210°, the light heads rotate 360° for directing light exactly where it’s needed. They're rated for use in environments where hazardous material is present.

Rated for use in environments where hazardous material is present.

Attach mini and full-size flashlights to a hard hat and keep your hands free to work.

Securely store your flashlight when not in use.

Because these flashlights are buoyant, they're easy to recover when dropped in the water.

Turn a mini flashlight into a headlamp with these straps.

Safe for use in environments where hazardous material is present.

Twist the base to turn these reusable lightsticks on and off.

A sealed head and switch keeps these lights shining in wet environments. They swing out from the wall and adjust horizontally and vertically to illuminate loading dock and trailers.

These lights are UL listed for use in hazardous locations where flammable/combustible gases, vapors, and liquids may be present.

No need for wiring—these lights plug-in with a three-prong plug.

Mount this light on a pole to illuminate pedestrian areas such as streets and walkways.

These lights automatically turn on when movement is detected and off when an area is unoccupied.

Powered by the sun, these security lights function in areas that don’t have access to electricity. They’re often used to shine light on parking lots, landscaping, signs, entryways, and other outdoor spaces.

Communicate a status at a glance by wiring these strip lights to change color when a part is malfunctioning inside your enclosure.

Mount add-on heads in remote areas to extend emergency lighting.

These lights are UL rated for use in hazardous locations where flammable/combustible gases, vapors, and liquids may be present.

These lights are sealed to protect against humidity, moisture, and dripping and splashing liquids.

Textured surfaces and irregularities are more visible.

Use where electrostatic discharge is a concern.

Fluorescent magnifiers produce a cool, even, white light.

Two LED bulbs illuminate your work.

LED magnifiers offer long life and emit a focused, even light beam for distortion-free viewing.

LED magnifiers offer long life and emit a focused, even light beam for distortion-free viewing.

Switch between three mirrors, a magnifying lens, and two retrieval magnets depending on your inspection job.

Mounted on casters, these mirrors maneuver under and around machinery, vehicles, and other hard-to-reach areas.