McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    66 Products
    About Pipe and Fittings
    industrial info icon

    Measure your pipe and fittings to identify their pipe size, thread size, schedule, and thread type. Then, find compatible components.

    Medium-Pressure Stainless Steel Butt-Weld Pipe Fittings

    Also known as Schedule 40 fittings, these have thicker walls than our thin-wall stainless steel unthreaded butt-weld fittings. They have beveled ends that, when flush to pipe, create a trough for a strong weld that permits maximum flow.
    Tee Connectors
    Image of Product. Butt Weld. Front orientation. Pipe and Fittings. Medium-Pressure Stainless Steel Butt-Weld Pipe Fittings, Tee Connectors, Butt Weld.

    Butt Weld

    304/304L Stainless Steel—Fittings hold up in humid, damp, and washdown environments but will corrode if exposed to salt water or chemicals.
    316/316L Stainless Steel—Fittings are the most corrosion resistant. They stand up to wet environments, just like 304 stainless steel fittings, but unlike 304 stainless steel, they will not corrode from salt water, chlorine solutions, and chemicals.
    304/304L
    Stainless Steel
    316/316L
    Stainless Steel
    Pipe
    Size
    Construction
    OD
    Pipe
    Schedule
    Each
    Each
    Butt Weld
    6
    		Welded6 5/8"40
    		45605K635000000045555K6350000000
     
    Stub-End Straight Adapters
    Image of Product. Straight Adapter. Front orientation. Pipe Stub Ends. Medium-Pressure Stainless Steel Butt-Weld Pipe Fittings.

    Straight Adapter

    Stub-end straight adapters are used with flanges. Slide a flange onto the stub end and weld the stub end to pipe (not the flange). Since the flange isn’t welded to the pipe, it can be disconnected easily, which creates an access point for frequent cleaning and inspecting.
    316/316L
    Stainless Steel
    Pipe
    Size
    Wall
    Thk.
    Flange
    OD
    Construction
    Pipe
    Schedule
    Each
    6
    		0.28"8 1/2"Welded40
    		45555K6650000000

    Low-Pressure Stainless Steel Butt-Weld Pipe Fittings

    Also known as Schedule 10 fittings, these are thin and lightweight. They have beveled ends that, when flush to pipe, create a trough for a strong weld that permits maximum flow.
    Tee Connectors
    Image of Product. Front orientation. Pipe and Fittings. Low-Pressure Stainless Steel Butt-Weld Pipe Fittings, Tee Connectors, Butt Weld.

    Butt Weld

    304/304L Stainless Steel—Fittings hold up in humid, damp, and washdown environments but will corrode if exposed to salt water or chemicals.
    316/316L Stainless Steel—Fittings are the most corrosion resistant. They stand up to wet environments, just like 304 stainless steel fittings, but unlike 304 stainless steel, they will not corrode from salt water, chlorine solutions, and chemicals.
    304/304L
    Stainless Steel
    316/316L
    Stainless Steel
    Pipe
    Size
    Construction
    OD
    Pipe
    Schedule
    Each
    Each
    Butt Weld
    6
    		Welded6 5/8"10
    		45735K262000000043645K1220000000
     
    Inline Tee Reducers
    Image of Product. Butt Weld. Front orientation. Contains Annotated. Pipe and Fittings. Low-Pressure Stainless Steel Butt-Weld Pipe Fittings, Inline Tee Reducers, Butt Weld × Butt Weld × Butt Weld.

    Butt Weld

    Inline tees are also known as branch tees.
    304/304L Stainless Steel—Fittings hold up in humid, damp, and washdown environments but will corrode if exposed to salt water or chemicals.
    316/316L Stainless Steel—Fittings are the most corrosion resistant. They stand up to wet environments, just like 304 stainless steel fittings, but unlike 304 stainless steel, they will not corrode from salt water, chlorine solutions, and chemicals.
    Pipe
    Size
    304/304L
    Stainless Steel
    316/316L
    Stainless Steel
    (A)
    (B)
    (C)
    Construction
    Pipe
    Schedule
    Each
    Each
    Butt Weld × Butt Weld × Butt Weld
    6
    		4
    		6
    		Welded10
    		45735K659000000043645K6380000000
     
    Stub-End Straight Adapters
    Image of Product. Straight Adapter. Front orientation. Pipe Stub Ends. Low-Pressure Stainless Steel Butt-Weld Pipe Fittings.

    Straight Adapter

    Stub-end straight adapters are used with flanges. Slide a flange onto the stub end and weld the stub end to pipe (not the flange). Since the flange isn’t welded to the pipe, it can be disconnected easily, which creates an access point for frequent cleaning and inspecting.
    304/304L
    Stainless Steel
    316/316L
    Stainless Steel
    Pipe
    Size
    Wall
    Thk.
    Flange
    OD
    Construction
    Pipe
    Schedule
    Each
    Each
    4
    		0.12"6 3/16"Welded10
    		45735K29900000043645K399000000
    6
    		0.134"8 1/2"Welded10
    		45735K31200000043645K154000000

    Low-Pressure Iron and Steel Butt-Weld Pipe Fittings

    Butt-weld fittings allow for a smooth connection that provides maximum flow. They have beveled ends that, when flush to pipe, create a trough for a strong, permanent weld. Fittings are also known as Schedule 40. They are for use in noncorrosive environments.
    Tee Connectors
    Image of Product. Front orientation. Pipe and Fittings. Low-Pressure Iron and Steel Butt-Weld Pipe Fittings, Tee Connectors, Butt Weld.

    Butt Weld

    Pipe
    Size
    Construction
    OD
    Pipe
    Schedule
    Material
    Each
    Butt Weld
    6
    		Seamless6 5/8"40
    		Steel
    		43425K2340000000
     
    180° Bend Connectors
    Image of Product. Front orientation. Pipe Traps. Low-Pressure Iron and Steel Butt-Weld Pipe Fittings.
    180° bend connectors are also known as U-bends.
    Pipe
    Size
    Construction
    Pipe
    Schedule
    Material
    Shape
    Each
    Butt Weld
    6
    		Seamless40
    		Steel
    		180° Bend43425K2330000000
     
    Stub-End Straight Adapters
    Image of Product. Straight Adapter. Front orientation. Pipe Stub Ends. Low-Pressure Iron and Steel Butt-Weld Pipe Fittings.

    Straight Adapter

    Stub-end straight adapters are used with flanges. Slide a flange onto the stub end and weld the stub end to pipe (not the flange). Since the flange isn’t welded to the pipe, it can be disconnected easily, which creates an access point for frequent cleaning and inspecting.
    Material Certificate Icon
    Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
    Pipe
    Size
    Flange
    OD
    Construction
    Pipe
    Schedule
    Finished
    Material
    Each
    6
    		8 1/2"Seamless40
    		Steel
    		43425K2350000000

    Thick-Wall Plastic Pipe Fittings for Water

    Connect these fittings to Schedule 80 pipe. With thicker, stronger walls than standard-wall fittings, they can handle heavy duty supply applications, such as water processing, wastewater treatment, and irrigation. Fittings are plastic for good corrosion resistance. They meet ASTM specifications and testing requirements for material quality.
    To prevent leaks in threaded connections, apply a sealant to the male threads. Threaded connections can be taken apart as needed for maintenance and repair. For metal threads, use PTFE tape. For plastic threads, apply a non-hardening, plastic-compatible sealant. Tape or sealants with PTFE are not recommended for plastic-to-plastic connections. When making a threaded connection be careful not to overtighten the threads. To prevent cracks and leaks, finger tighten the fitting, then wrench-tighten one to two turns.
    Warning: Never use plastic pipe fittings, flanges, and pipe with compressed air or gas.
    Note: For fittings that are not rated for pressure, you can use the pressure rating of the plastic pipe as a reference. Threaded fittings are limited to 50% of the rated pressure of the pipe.
    Tee Connectors
    Image of Product. Cement Socket Female. Front orientation. Pipe and Fittings. Thick-Wall Plastic Pipe Fittings for Water, Tee Connectors, Cement Socket Female.

    Cement Socket Female

    Image of Product. NPT Female. Front orientation. Pipe and Fittings. Thick-Wall Plastic Pipe Fittings for Water, Tee Connectors, Female, Threaded Fitting Connection.

    NPT Female

    Cement-Socket Fitting Connection—Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a PVC primer and cement (also known as solvent weld).
    NSF/ANSI 61—To adhere to safety standards for drinking water systems, use pipe that meets NSF/ANSI 61.
    Pipe
    Size
    Pipe
    Schedule
    Material
    Color
    Max. Pressure
    @ Temp.
    Food Industry
    Std.
    Each
    NPT Female
    6
    		80
    		PVCDark GrayNot RatedNSF/ANSI 61
    		4596K3270000000
     
    Cement Socket Female
    6
    		80
    		PVCDark GrayNot RatedNSF/ANSI 61
    		4881K11800000
     
    Inline Tee Reducing Adapters
    Image of Product. Cement Socket Female x NPT Female x Cement Socket Female. Front orientation. Pipe and Fittings. Thick-Wall Plastic Pipe Fittings for Water, Inline Tee Reducing Adapters, Threaded Fitting Connection, Female, Cement-Socket Fitting Connection.

    Cement Socket

    Female x NPT Female

    x Cement Socket

    Female

    Inline tees are also known as branch tees.
    Cement-Socket Fitting Connection—Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a PVC primer and cement (also known as solvent weld).
    NSF/ANSI 61—To adhere to safety standards for drinking water systems, use pipe that meets NSF/ANSI 61.
    Pipe
    Size
    (A)
    (B)
    (C)
    Pipe
    Schedule
    Material
    Color
    Max. Pressure
    @ Temp.
    Food Industry
    Std.
    Each
    Cement Socket Female × NPT Female × Cement Socket Female
    6
    		1
    		6
    		80
    		PVCDark GrayNot RatedNSF/ANSI 61
    		4596K2540000000
    6
    		2
    		6
    		80
    		PVCDark GrayNot RatedNSF/ANSI 61
    		4596K232000000
    6
    		3
    		6
    		80
    		PVCDark GrayNot RatedNSF/ANSI 61
    		4596K233000000
    6
    		4
    		6
    		80
    		PVCDark GrayNot RatedNSF/ANSI 61
    		4596K234000000
     
    Inline Tee Reducers
    Image of Product. Cement Socket Female. Front orientation. Contains Annotated. Pipe and Fittings. Thick-Wall Plastic Pipe Fittings for Water, Inline Tee Reducers, Cement Socket Female × Cement Socket Female × Cement Socket Female.

    Cement Socket Female

    Inline tees are also known as branch tees.
    Cement-Socket Fitting Connection—Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a PVC primer and cement (also known as solvent weld).
    NSF/ANSI 61—To adhere to safety standards for drinking water systems, use pipe that meets NSF/ANSI 61.
    Pipe
    Size
    (A)
    (B)
    (C)
    Pipe
    Schedule
    Material
    Color
    Max. Pressure
    @ Temp.
    Food Industry
    Std.
    Each
    Cement Socket Female × Cement Socket Female × Cement Socket Female
    6
    		2
    		6
    		80
    		PVCDark GrayNot RatedNSF/ANSI 61
    		4881K0730000000
    6
    		3
    		6
    		80
    		PVCDark GrayNot RatedNSF/ANSI 61
    		4881K17800000
    6
    		4
    		6
    		80
    		PVCDark GrayNot RatedNSF/ANSI 61
    		4881K154000000
    8
    		6
    		8
    		80
    		PVCDark GrayNot RatedNSF/ANSI 61
    		4881K155000000
     
    Saddle Tap Tees with Gasket
    Image of Product. Front orientation. Pipe and Fittings. Thick-Wall Plastic Pipe Fittings for Water, Saddle Tap Tees with Gasket, Cement Socket Female × Clamp On.

    Cement Socket

    Female × Clamp

    On

    Saddle-tap tee adapters allow you to create additional outlets and connections in metal or plastic pipe. To install, shut down your line and drill a hole in the pipe where you want to create a connection. Position the saddle over the hole so the gasket and lip are fully engaged and secure with the included nuts, bolts, and washers.
    Cement-Socket Fitting Connection—Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a PVC primer and cement (also known as solvent weld).
    NSF/ANSI 61—To adhere to safety standards for drinking water systems, use pipe that meets NSF/ANSI 61.
    Pipe Size
    (A)
    For Pipe
    Size (B)
    For Pipe
    OD (B)
    For Hole
    Dia.
    Pipe
    Schedule
    Material
    Color
    Max. Pressure
    @ Temp.
    Gasket
    Material
    Food Industry
    Std.
    Each
    Cement Socket Female × Clamp On
    1
    		6
    		6 5/8"1 1/8"80
    		PVCDark Gray315 psi @ 72° FEPDM
    		NSF/ANSI 61
    		4849K690000000
    2
    		6
    		6 5/8"2 1/4"80
    		PVCDark Gray200 psi @ 72° FEPDM
    		NSF/ANSI 61
    		4849K37000000
    3
    		6
    		6 5/8"3"80
    		PVCDark Gray185 psi @ 72° FEPDM
    		NSF/ANSI 61
    		4849K39000000
     
    Saddle Tap Tees with Collar and Gasket
    Image of Product. Female x Clamp On. Front orientation. Pipe and Fittings. Thick-Wall Plastic Pipe Fittings for Water, Saddle Tap Tees with Collar and Gasket, Clamp-On Fitting Connection, Threaded Fitting Connection, Female.

    Female x Clamp On

    Saddle-tap tee adapters allow you to create additional outlets and connections in metal or plastic pipe. To install, shut down your line and drill a hole in the pipe where you want to create a connection. Position the saddle over the hole so the gasket and lip are fully engaged and secure with the included nuts, bolts, and washers.
    Fittings with collar have a stainless steel reinforcement on the female threads to prevent the threads from cracking.
    NSF/ANSI 61—To adhere to safety standards for drinking water systems, use pipe that meets NSF/ANSI 61.
    Pipe Size
    (A)
    For Pipe
    Size (B)
    For Pipe
    OD (B)
    For Hole
    Dia.
    Pipe
    Schedule
    Material
    Color
    Max. Pressure
    @ Temp.
    Gasket
    Material
    Food Industry
    Std.
    Each
    NPT Female × Clamp On
    1
    		6
    		6 5/8"1 1/8"80
    		PVCDark Gray315 psi @ 72° FEPDM
    		NSF/ANSI 61
    		4849K740000000
    2
    		6
    		6 5/8"2 1/4"80
    		PVCDark Gray200 psi @ 72° FEPDM
    		NSF/ANSI 61
    		4849K82000000
    3
    		6
    		6 5/8"3"80
    		PVCDark Gray185 psi @ 72° FEPDM
    		NSF/ANSI 61
    		4849K83000000
     

    Standard-Wall Plastic Pipe Fittings for Water

    Connect these fittings to Schedule 40 plastic pipe–they are the industry standard for residential and commercial low-pressure plumbing and water supply applications. They are plastic for good corrosion resistance.
    To prevent leaks in threaded connections, apply a sealant to the male threads. Threaded connections can be taken apart as needed for maintenance and repair. For metal threads, use PTFE tape. For plastic threads, apply a non-hardening, plastic-compatible sealant. Tape or sealants with PTFE are not recommended for plastic-to-plastic connections. When making a threaded connection be careful not to overtighten the threads. To prevent cracks and leaks, finger tighten the fitting, then wrench-tighten one to two turns.
    Warning: Never use plastic pipe fittings, flanges, and pipe with compressed air or gas.
    Note: For fittings that are not rated for pressure, you can use the pressure rating of the plastic pipe as a reference. Threaded fittings are limited to 50% of the rated pressure of the pipe.
    Tee Connectors
    Image of Product. Female. Front orientation. Pipe and Fittings. Standard-Wall Plastic Pipe Fittings for Water, Tee Connectors, Cement Socket Female.

    Female

    Cement-Socket Fitting Connection—Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a PVC primer and cement (also known as solvent weld).
    NSF/ANSI 61—To adhere to safety standards for drinking water systems, use pipe that meets NSF/ANSI 61.
    Pipe
    Size
    Pipe
    Schedule
    Material
    Color
    Max. Pressure
    @ Temp.
    Food Industry
    Std.
    Each
    Cement Socket Female
    6
    		40
    		PVCWhiteNot RatedNSF/ANSI 61
    		4880K121000000
     
    Inline Tee Reducing Adapters
    Image of Product. Female. Front orientation. Contains Annotated. Pipe and Fittings. Standard-Wall Plastic Pipe Fittings for Water, Inline Tee Reducing Adapters, Threaded Fitting Connection, Female, Cement-Socket Fitting Connection.

    Female

    Inline tees are also known as branch tees.
    Cement-Socket Fitting Connection—Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a PVC primer and cement (also known as solvent weld).
    NSF/ANSI 61—To adhere to safety standards for drinking water systems, use pipe that meets NSF/ANSI 61.
    Pipe
    Size
    (A)
    (B)
    (C)
    Pipe
    Schedule
    Material
    Color
    Max. Pressure
    @ Temp.
    Food Industry
    Std.
    Each
    Cement Socket Female × NPT Female × Cement Socket Female
    6
    		2
    		6
    		40
    		PVCWhiteNot RatedNSF/ANSI 61
    		4880K4970000000
    6
    		4
    		6
    		40
    		PVCWhiteNot RatedNSF/ANSI 61
    		4880K498000000
     
    Inline Tee Reducers
    Image of Product. Female. Front orientation. Contains Annotated. Pipe and Fittings. Standard-Wall Plastic Pipe Fittings for Water, Inline Tee Reducers, Cement Socket Female × Cement Socket Female × Cement Socket Female.

    Female

    Inline tees are also known as branch tees.
    Cement-Socket Fitting Connection—Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a PVC primer and cement (also known as solvent weld).
    NSF/ANSI 61—To adhere to safety standards for drinking water systems, use pipe that meets NSF/ANSI 61.
    Pipe
    Size
    (A)
    (B)
    (C)
    Pipe
    Schedule
    Material
    Color
    Max. Pressure
    @ Temp.
    Food Industry
    Std.
    Each
    Cement Socket Female × Cement Socket Female × Cement Socket Female
    6
    		2
    		6
    		40
    		PVCWhiteNot RatedNSF/ANSI 61
    		4880K586000000
    6
    		3
    		6
    		40
    		PVCWhiteNot RatedNSF/ANSI 61
    		4880K58700000
    6
    		4
    		6
    		40
    		PVCWhiteNot RatedNSF/ANSI 61
    		4880K98400000
    8
    		6
    		8
    		40
    		PVCWhiteNot RatedNSF/ANSI 61
    		4880K985000000
     
    Saddle Tap Tees with Gasket
    Image of Product. Female × Clamp On. Front orientation. Pipe and Fittings. Standard-Wall Plastic Pipe Fittings for Water, Saddle Tap Tees with Gasket, Cement Socket Female × Clamp On.

    Female × Clamp On

    Saddle-tap tee adapters allow you to create additional outlets and connections in metal or plastic pipe. To install, shut down your line and drill a hole in the pipe where you want to create a connection. Position the saddle over the hole so the gasket and lip are fully engaged and secure with the included nuts, bolts, and washers.
    Cement-Socket Fitting Connection—Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a PVC primer and cement (also known as solvent weld).
    NSF/ANSI 61—To adhere to safety standards for drinking water systems, use pipe that meets NSF/ANSI 61.
    Pipe Size
    (A)
    For Pipe
    Size (B)
    For Pipe
    OD (B)
    For Hole
    Dia.
    OD
    Pipe
    Schedule
    Material
    Color
    Max. Pressure
    @ Temp.
    Gasket
    Material
    Food Industry
    Std.
    Each
    Cement Socket Female × Clamp On
    1
    		6
    		6 5/8"1 1/8"1 5/16"40
    		PVCWhite225 psi @ 72° FEPDM
    		NSF/ANSI 61
    		4763K420000000
    2
    		6
    		6 5/8"2 1/4"2 3/8"40
    		PVCWhite200 psi @ 72° FEPDM
    		NSF/ANSI 61
    		4763K82000000
     
    Saddle Tap Tees with Collar and Gasket
    Image of Product. Female × Clamp On. Front orientation. Pipe and Fittings. Standard-Wall Plastic Pipe Fittings for Water, Saddle Tap Tees with Collar and Gasket, Clamp-On Fitting Connection, Threaded Fitting Connection, Female.

    Female × Clamp On

    Saddle-tap tee adapters allow you to create additional outlets and connections in metal or plastic pipe. To install, shut down your line and drill a hole in the pipe where you want to create a connection. Position the saddle over the hole so the gasket and lip are fully engaged and secure with the included nuts, bolts, and washers.
    Fittings with collar have a stainless steel reinforcement on the female threads to prevent the threads from cracking.
    NSF/ANSI 61—To adhere to safety standards for drinking water systems, use pipe that meets NSF/ANSI 61.
    Pipe Size
    (A)
    For Pipe
    Size (B)
    For Pipe
    OD (B)
    For Hole
    Dia.
    OD
    Pipe
    Schedule
    Material
    Color
    Max. Pressure
    @ Temp.
    Gasket
    Material
    Food Industry
    Std.
    Each
    NPT Female × Clamp On
    1
    		6
    		1 5/8"1 1/8"1 5/16"40
    		PVCWhite225 psi @ 72° FEPDM
    		NSF/ANSI 61
    		4763K450000000
    2
    		6
    		6 5/8"2 1/4"2 3/8"40
    		PVCWhite200 psi @ 72° FEPDM
    		NSF/ANSI 61
    		4763K85000000
     

    CPVC Pipe Fittings for Chemicals

    Made of CPVC, these fittings withstand salt solutions, acids, and other harsh substances. They have thick, strong walls to handle heavy duty industrial plumbing and water supply applications, such as water processing and wastewater treatment. These fittings are comparable to Corzan. Some meet ASTM D1784 specifications and testing requirements for material quality.
    To prevent leaks in threaded connections, apply a sealant to the male threads. Threaded connections can be taken apart as needed for maintenance and repair. For metal threads, use PTFE tape. For plastic threads, apply a non-hardening, plastic-compatible sealant. Tape or sealants with PTFE are not recommended for plastic-to-plastic connections. When making a threaded connection be careful not to overtighten the threads. To prevent cracks and leaks, finger tighten the fitting, then wrench-tighten one to two turns.
    Warning: Never use plastic pipe fittings, flanges, and pipe with compressed air or gas.
    Tee Connectors
    Image of Product. Front orientation. Pipe and Fittings. CPVC Pipe Fittings for Chemicals, Tee Connectors, Cement Socket Female.

    Cement Socket Female

    Cement-Socket Fitting Connection—Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a CPVC primer and cement (also known as solvent weld).
    80 Pipe Schedule—Schedule 80 fittings have thick, strong walls for heavy duty, industrial applications.
    NSF/ANSI 61—To adhere to safety standards for drinking water systems, use pipe that meets NSF/ANSI 61.
    Pipe
    Size
    Pipe
    Schedule
    Material
    Color
    Max. Pressure
    @ Temp.
    Food Industry
    Std.
    Each
    Cement Socket Female
    6
    		80
    		CPVCLight GrayNot RatedNSF/ANSI 61
    		6826K1060000000
     
    Inline Tee Reducers
    Image of Product. Cement Socket Female. Front orientation. Contains Annotated. Pipe and Fittings. CPVC Pipe Fittings for Chemicals, Inline Tee Reducers, Cement Socket Female × Cement Socket Female × Cement Socket Female.

    Cement Socket Female

    Inline tees are also known as branch tees.
    Cement-Socket Fitting Connection—Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a CPVC primer and cement (also known as solvent weld).
    80 Pipe Schedule—Schedule 80 fittings have thick, strong walls for heavy duty, industrial applications.
    NSF/ANSI 61—To adhere to safety standards for drinking water systems, use pipe that meets NSF/ANSI 61.
    Pipe
    Size
    (A)
    (B)
    (C)
    Pipe
    Schedule
    Material
    Color
    Max. Pressure
    @ Temp.
    Food Industry
    Std.
    Each
    Cement Socket Female × Cement Socket Female × Cement Socket Female
    6
    		4
    		6
    		80
    		CPVCLight GrayNot RatedNSF/ANSI 61
    		6826K3240000000
    8
    		6
    		8
    		80
    		CPVCLight GrayNot RatedNSF/ANSI 61
    		6826K325000000
     
    Pipe Cement
    Each
    Pipe Cement for Max. Pipe Size 6 (8-fl. oz. Can)74605A31000000
    Saddle Tap Tees with Gasket
    Image of Product. NPT Female × Clamp On. Front orientation. Pipe and Fittings. CPVC Pipe Fittings for Chemicals, Saddle Tap Tees with Gasket, Clamp-On Fitting Connection, Threaded Fitting Connection, Female.

    NPT Female ×

    Clamp On

    Saddle-tap tees allow you to create additional outlets and connections in metal or plastic pipe. They clamp on for an easy way to install and maintain systems.
    80 Pipe Schedule—Schedule 80 fittings have thick, strong walls for heavy duty, industrial applications.
    NSF/ANSI 61—To adhere to safety standards for drinking water systems, use pipe that meets NSF/ANSI 61.
    Pipe Size
    (A)
    For Pipe
    Size (B)
    For Pipe
    OD (B)
    For Hole
    Dia.
    Pipe
    Schedule
    Material
    Color
    Max. Pressure
    @ Temp.
    Gasket
    Material
    Food Industry
    Std.
    Each
    NPT Female × Clamp On
    2
    		6
    		6 5/8"2 1/4"80
    		CPVCLight Gray200 psi @ 72° FEPDM
    		NSF/ANSI 61
    		4589K4550000000
     

    Low-Pressure Iron and Steel Threaded Pipe Fittings

    Use these fittings for low-pressure applications in noncorrosive environments.
    Tee Connectors
    Image of Product. Female. Front orientation. Pipe and Fittings. Low-Pressure Iron and Steel Threaded Pipe Fittings, Tee Connectors, Female, Threaded Fitting Connection.

    Female

    Pipe
    Size
    Pressure
    Class
    Material
    Max. Pressure
    @ Temp.
    Max. Steam Pressure
    @ Temp.
    Certification
    Each
    NPT Female
    6
    		150
    		Iron150 psi @ 72° F150 psi @ 350° FUL Listed
    		44605K533000000000
     
    Saddle Tap Tees with Gasket
    Image of Product. Female × Clamp On. Front orientation. Contains Annotated. Pipe and Fittings. Low-Pressure Iron and Steel Threaded Pipe Fittings, Saddle Tap Tees with Gasket, Clamp-On Fitting Connection, Threaded Fitting Connection, Female.

    Female × Clamp On

    Saddle tap tees tap into existing pipe lines so you can install branch lines, valves, and other equipment. The gasket and clamps create a tight seal so the opening won’t leak. To install, shut down your line and secure the clamps, then drill a hole into the pipe.
    Pipe Size
    (A)
    For Pipe
    Size (B)
    For Pipe
    OD (B)
    Material
    Color
    Max. Pressure
    @ Temp.
    Gasket
    Material
    Clamp Material
    Each
    NPT Female × Clamp On
    1/2
    		6
    		6 5/8"Epoxy-Coated IronBlue100 psi @ 72° FBuna-N
    		Galvanized Steel4572K215000000
    3/4
    		6
    		6 5/8"Epoxy-Coated IronBlue100 psi @ 72° FBuna-N
    		Galvanized Steel4572K22500000
    1
    		6
    		6 5/8"Epoxy-Coated IronBlue100 psi @ 72° FBuna-N
    		Galvanized Steel4572K23500000
    1 1/4
    		6
    		6 5/8"Epoxy-Coated IronBlue100 psi @ 72° FBuna-N
    		Galvanized Steel4572K244000000
    1 1/2
    		6
    		6 5/8"Epoxy-Coated IronBlue100 psi @ 72° FBuna-N
    		Galvanized Steel4572K254000000
    2
    		6
    		6 5/8"Epoxy-Coated IronBlue100 psi @ 72° FBuna-N
    		Galvanized Steel4572K263000000
     
    180° Bend Connectors
    Image of Product. Front orientation. Pipe Traps. Low-Pressure Iron and Steel Threaded Pipe Fittings.
    180° bend connectors are also known as U-bends.
    Pipe
    Size
    Material
    Max. Pressure
    @ Temp.
    Max. Steam Pressure
    @ Temp.
    Certification
    Shape
    Each
    NPT Female
    1/2
    		Iron150 psi @ 72° F150 psi @ 350° FUL Listed
    		180° Bend44605K563000000
    3/4
    		Iron150 psi @ 72° F150 psi @ 350° FUL Listed
    		180° Bend44605K56400000
    1
    		Iron150 psi @ 72° F150 psi @ 350° F—180° Bend44605K56500000
    1 1/4
    		Iron150 psi @ 72° F150 psi @ 350° FUL Listed
    		180° Bend44605K56600000
    1 1/2
    		Iron150 psi @ 72° F150 psi @ 350° FUL Listed
    		180° Bend44605K567000000
    2
    		Iron150 psi @ 72° F150 psi @ 350° FUL Listed
    		180° Bend44605K568000000
     

    High-Pressure Iron and Steel Butt-Weld Pipe Fittings

    With thicker, stronger walls than our standard-wall butt-weld pipe fittings, these fittings stand up to your high strength applications. Weld them flush against pipe for a smooth connection that permits maximum flow. These fittings have beveled ends that create a trough for a leak-resistant, permanent weld. Made of steel, they’re for use in noncorrosive environments.
    Material Certificate Icon
    Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
    Tee Connectors
    Image of Product. Front orientation. Pipe and Fittings. High-Pressure Iron and Steel Butt-Weld Pipe Fittings, Tee Connectors, Butt Weld.

    Butt Weld

    Pipe
    Size
    Construction
    OD
    Pipe
    Schedule
    Material
    Each
    Butt Weld
    6
    		Seamless6 5/8"80
    		Steel
    		4981T230000000
     
    180° Bend Connectors
    Image of Product. Front orientation. Pipe Traps. High-Pressure Iron and Steel Butt-Weld Pipe Fittings.
    180° bend connectors are also known as U-bends.
    Pipe
    Size
    Construction
    Pipe
    Schedule
    Material
    Shape
    Each
    Butt Weld
    6
    		Seamless80
    		Steel
    		180° Bend4981T670000000
     
    Stub-End Straight Adapters
    Image of Product. Straight Adapter. Front orientation. Pipe Stub Ends. High-Pressure Iron and Steel Butt-Weld Pipe Fittings.

    Straight Adapter

    Stub-end straight adapters are used with flanges. Slide a flange onto the stub end and weld the stub end to pipe (not the flange). Since the flange isn’t welded to the pipe, it can be disconnected easily, which creates an access point for frequent cleaning and inspecting.
    Pipe
    Size
    Flange
    OD
    Construction
    Pipe
    Schedule
    Finished
    Material
    Each
    6
    		8 1/2"Seamless80
    		Steel
    		4981T3210000000

    FM-Approved Medium-Pressure Iron and Steel Grooved-End Pipe Fittings

    Connect fire water mains, sprinkler systems, and other fire-protection pipelines. FM approved, these fittings meet safety standards for reducing the risk of fire. Their grooved ends clamp to pipe—no heat or threading required—so you can quickly access your line for routine maintenance. Use them in noncorrosive applications. Also known as Victaulic fittings.
    Tee Connectors
    Image of Product. Front orientation. Pipe and Fittings. FM-Approved Medium-Pressure Iron and Steel Grooved-End Pipe Fittings, Tee Connectors, Grooved-End Clamp-On Male.

    Grooved-End Clamp-On Male

    Pipe
    Size
    Color
    Max. Pressure
    @ Temp.
    Certification
    Each
    Grooved-End Clamp-On Male
    6
    		Orange750 psi @ 72° FFM Approved, UL Listed
    		5723T4430000000
     

    Low-Pressure Galvanized Iron and Steel Threaded Pipe Fittings

    The galvanized finish on these fittings provides fair corrosion resistance. Fittings are for use in low-pressure applications.
    Tee Connectors
    Image of Product. Front orientation. Pipe and Fittings. Low-Pressure Galvanized Iron and Steel Threaded Pipe Fittings, Tee Connectors, Female, Threaded Fitting Connection.

    Threaded Fitting

    Connection, Female

    Pipe
    Size
    Pressure
    Class
    Material
    Max. Pressure
    @ Temp.
    Max. Steam Pressure
    @ Temp.
    Certification
    Each
    NPT Female
    6
    		150
    		Galvanized Iron150 psi @ 72° F150 psi @ 350° FUL Listed
    		4638K398000000000
     

    Drain, Waste, and Vent PVC Clamp-On Pipe Fittings for Water

    To make installing and maintaining systems easy, these connectors come with clamps that form a strong seal on pipe and fittings once tightened.
    Warning: Never use plastic pipe fittings, flanges, and pipe with compressed air or gas.
    Saddle Tap Tees
    Image of Product. Front orientation. Contains Annotated. Pipe and Fittings. Drain, Waste, and Vent PVC Clamp-On Pipe Fittings for Water, Saddle Tap Tees, Clamp On × Clamp On.

    Clamp On × Clamp On

    Saddle-tap adapters allow you to tap into an existing pipeline. They have wraparound clamps that provide nearly 360° contact with pipe; as the clamps are tightened, pressure is uniformly distributed around the pipe for maximum support. To install, shut down your line and drill a hole in the pipe where you want to create a connection. Position the saddle over the hole and tighten the clamps.
    For
    Pipe Size
    (A)
    (B)
    For Hole
    Dia.
    Material
    Max. Pressure
    @ Temp.
    Clamp Material
    Each
    Clamp On × Clamp On
    6
    		6 to 125 1/2"PVCNot Rated300 Series Stainless Steel48545K170000000
     

    Expansion Plugs for Cleanout Tees

    Image of ProductInUse. Side1 orientation. Contains Inset. Expansion Plugs. Expansion Plugs for Cleanout Tees.
    Seal cleanout tees when testing your drain, waste, and vent systems for pressure and leaks—no need to inflate these plugs with an air compressor or hand pump. To install, insert the plug end into your pipe so the curved foot is on the bottom threads of the cleanout tee, then push down the handle to lock it into the foot. The foot has a two-stage release latch: lift the handle one notch to release the plug and allow liquid to drain slowly, then lift the handle again until the foot fully disengages to take out the plug.
    Maximum Air Back Pressure—Maximum air back pressure is the amount of pressure a plug can withstand without moving.
    Maximum Water Back Pressure—Maximum water back pressure refers to the pressure resulting from the height of the water above the plug.
    For
    Pipe
    Max. Back
    Pressure
    Steel Handle
    Size
    ID
    Air,
    psi
    Water, ft.
    of head
    Overall
    Ht.
    Temp. Range,
    ° F
    Seal Material
    For Use With
    Each
    6
    		6.065"358018"32 to 120Natural Rubber
    		ABS Pipe, Cast Iron Pipe, PVC Pipe6568N2010000000
     
    back to top