No cords or software required—these data recorders store readings on an included SD card in Excel format for easy transfer to a PC.

Monitor temperature and pressure in hard-to-access system components with this data recorder that has remote sensors that track and store readings for upload to a PC.

Store up to 500 readings on these thermometers and determine temperature within ±0.75° F accuracy.

About half the size of standard temperature data recorders, these are often used to monitor temperature inside refrigerators, incubators, storage compartments, and other small spaces. They have a built-in sensor, so no probe is needed.

Track ambient temperature and relative humidity over time with this recorder. Recorders come with a replaceable sensor, so no probe is needed.

Check temperature, atmospheric pressure, and altitude wherever you go with these palm-sized barometers.

To alert you of temperature fluctuations, these recorders sound an alarm and flash the display when temperature rises above or falls below the programmable temperature range. They have a thermocouple type-K probe on a 4-ft. cable for taking readings in hard-to-access areas.

Note: Thermocouple probes are not interchangeable with RTD probes.

Designed for laboratory applications, these thermometers determine temperature within ±0.75° F accuracy.

Record temperature in hard-to-access areas. These recorders have a remote thermocouple type-J probe on a 15-ft. cable. They include 60 assorted charts with a variety of recording times and temperature ranges.

Note: Thermocouple probes are not interchangeable with RTD probes.

Also known as data loggers, these recorders track and store up to 64,000 data samples that you can upload to your computer using a USB connection or a flash drive. Recorders are rated IP68 for protection against water submersion. The LCD shows pressure for local readings.

Record measurements from electrical tests over time to identify intermittent issues such as voltage spikes and temporary power flow problems. Review data captured by these high-quality and durable Fluke multimeters in real-time or save it for future analysis.

For more accurate and consistent readings than thermometers with thermocouple probes and a longer service life, these thermometers have a resistance temperature detector (RTD) probe. It logs up to 2,000 time- and date-stamped readings and uploads data to a PC through the USB port.

Measure and record pressure on a paper chart to troubleshoot system problems and track important process parameters. Recorders are rated NEMA 4X for protection from dirt, washdowns, and corrosion.

Identify intermittent issues such as voltage spikes and temporary power flow problems—these meters record measurements from electrical tests over time. Review data in real time or save it for future analysis.

Remotely record temperature, humidity, and dew point up to 10 feet from the display and set the alarm to sound and flash the display if temperature readings rise above or fall below a set range. This recorder has a remote probe on a 10-ft. cable and a display that can be set to show current temperature, minimum/maximum temperature, or relative humidity and calculated dew point.