Temperature Panel Meters

Filter by

Display Type

Maximum Temperature

1,000° F to 1,499.9° F

1,500° F to 1,999.9° F

Thermometer Type

Thermocouple Probe Type

Measurement Unit

Probe Type

Output Voltage

Minimum Temperature

Application

Controller Output Type

Analog Signal

Mechanical Relay

Solid State Relay

For DIN Panel Cutout Size

Mounting Location

For Use With

Number of Outputs

Maximum Cable Temperature

Cable Length

Input Voltage

Mount Type

Maximum Switching Current @ Voltage

Environment

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

REACH

RoHS

Compliant with Exemptions

Dial Diameter

84 Products

High-Temperature Panel-Mount Thermometers

Often used to remotely monitor probe readings in high-temperature applications, these thermometers have a housing designed for installation in instrument and control panels. They interpret data from a thermocouple probe or RTD probe (sold separately).

									For Panel Cutout
Temp. Range	Resolution/Temp. Resolution	Accuracy	Digit Ht.	Mount Type	For Thermocouple Probe Type	For RTD Probe Resistance, ohm	Probe Connection	For DIN Panel Cutout Size	Ht.	Wd.	Ht.	Wd.	Dp.	Max. Pressure @ Temp.	Housing Material	Electrical Connection	Freq., Hz	Operating Voltage, V AC		Each



	-2° F to 752° F	1° F	±3.3° F	17/32"	Panel	K	—	Wire Leads	1/8	1 25/32"	3 5/8"	1 7/8"	3 3/4"	4 5/8"	Not Rated	Plastic	Screw Terminal	60	120, 240	0000000	0000000


	0° F to 1,000° F	1° F	±5.0° F	17/32"	Panel	J	—	Wire Leads	1/8	1 25/32"	3 5/8"	1 7/8"	3 3/4"	4 5/8"	Not Rated	Plastic	Screw Terminal	60	120, 240	0000000	000000
	0° F to 1,999° F	1° F	±10° F	17/32"	Panel	K	—	Wire Leads	1/8	1 25/32"	3 5/8"	1 7/8"	3 3/4"	4 5/8"	Not Rated	Plastic	Screw Terminal	60	120, 240	0000000	000000
	32° F to 428° F	1° F	±2.8° F	17/32"	Panel	J	—	Wire Leads	1/8	1 25/32"	3 5/8"	1 7/8"	3 3/4"	4 5/8"	Not Rated	Plastic	Screw Terminal	60	120, 240	0000000	000000
	-346° F to 1,400° F/-210° C to 760° C	1° F	±3.7° F	17/32"	Panel	J	—	Wire Leads	1/8	1 25/32"	3 5/8"	1 7/8"	3 3/4"	4 5/8"	Not Rated	Plastic	Screw Terminal	60	120, 240	0000000	000000
	-157° F to 752° F/-105° C to 400° C	1° F	±3.7° F	17/32"	Panel	T	—	Wire Leads	1/8	1 25/32"	3 5/8"	1 7/8"	3 3/4"	4 5/8"	Not Rated	Plastic	Screw Terminal	60	120, 240	0000000	000000
	-157° F to 1,999° F/-105° C to 1,372° C	1° F	±3.7° F	17/32"	Panel	K	—	Wire Leads	1/8	1 25/32"	3 5/8"	1 7/8"	3 3/4"	4 5/8"	Not Rated	Plastic	Screw Terminal	60	120, 240	0000000	000000
	-58° F to 200° F/-50° C to 199° C	0.1	±0.3° F	17/32"	Panel	—	100	Wire Leads	1/8	1 25/32"	3 5/8"	1 7/8"	3 3/4"	4 5/8"	Not Rated	Plastic	Screw Terminal	60	120, 240	0000000	000000
	-58° F to 1,562° F/-50° C to 850° C	1° F	±2° F	17/32"	Panel	—	100	Wire Leads	1/8	1 25/32"	3 5/8"	1 7/8"	3 3/4"	4 5/8"	Not Rated	Plastic	Screw Terminal	60	120, 240	0000000	000000

Through-Wall-Mount Temperature and Humidity Meters

Monitor relative humidity, temperature, and dew point inside sealed containers. These meters are rated IP67, so they won't expose contents to dust and water. The housing is aluminum, which is lightweight and resists corrosion.

RH		Temp.		Dew Point
Range	Accuracy	Indoor Range, ° C	Accuracy	Range, ° C	Accuracy	Dp.	Dia.	For Hole Dia.	For Max. Wall Thk.	Batteries Included	Fasteners Included	Enclosure Rating		Each
5% to 80%	±3%	-20 to 60	±0.5° C	-30 to 20	±2° C	1 1/4"	2 1/2"	1 27/64"	11/32"	Yes	Yes	IP67	0000000	0000000

Miniature Remote-Reading Panel-Mount Thermometers


Thermometer with 20" Probe	Thermometer with 7/8" Probe

Install the small display in tight spaces and crowded instrument panels up to 10 feet from the probe.

					Probe			Mounting Holes			For Panel Cutout						Material			Batteries
Temp. Range	Resolution/Temp. Resolution	Accuracy	Digit Ht.	Cable Lg., ft.	Lg.	Dia.	Mount Type	No. of	Dia.	Fasteners Included	Ht.	Wd.	Ht.	Wd.	Dp.	Max. Pressure @ Temp.	Housing	Lens	Probe	Included	Size	No. of		Each



	-40° F to 300° F/-40° C to 150° C	0.1/0.1° C	±1.8° F	1.667"	10	7/8"	3/16"	Panel	2	5/32"	No	1 1/2"	2 3/4"	1 5/8"	2 15/16"	1"	Not Rated	Plastic	Glass	Stainless Steel	Yes	AAA	1	0000000	000000


	14° F to 230° F/-10° C to 110° C	0.1/0.1° C	±1° F	1.667"	10	20"	3/16"	Panel	2	3/8"	No	3 3/4"	4 3/4"	3 5/16"	4 3/4"	1 1/4"	Not Rated	Plastic	Glass	Stainless Steel	Yes	AAA	4	0000000	000000

Remote-Reading Panel-Mount Thermometers


Front Flange	Front Flange	Back Flange	Back Flange	Bracket Panel Mount

Monitor the temperature of difficult-to-access system components from a distance. The probe is connected to a cable, so the dial can be mounted away from your system.

NSF/ANSI 2—Thermometers that meet NSF/ANSI standards are for use in food processing and preparation areas.

					Probe						Mounting Holes			Material
Temp. Range	Graduations	Accuracy	Dial Dia.	Cable Lg., ft.	Lg.	Dia.	Panel Cutout Dia.	Flange OD	Bolt Circle Dia.	Mount Type	No. of	Dia.	Fasteners Included	Housing	Lens	Probe	Food Industry Std.		Each







			Front Flange Mount

			-40° F to 60° F/-40° C to 15° C	2° F/2° C	±2%	2"	4	2 1/2"	5/16"	2 1/32"	3"	2 5/8"	Panel	3	5/32"	No	Stainless Steel	Polycarbonate	Tin-Plated Copper	NSF/ANSI 2	00000000	000000


			-40° F to 60° F/-40° C to 15° C	2° F/2° C	±2%	2"	20	4"	3/8"	2 1/32"	3"	2 5/8"	Panel	3	5/32"	No	Stainless Steel	Polycarbonate	Tin-Plated Copper	—	00000000	00000
			-40° F to 60° F/-40° C to 15° C	2° F/2° C	±2%	2 1/2"	4	2 1/2"	5/16"	2 17/32"	3 1/2"	3 3/16"	Panel	3	5/32"	No	Stainless Steel	Polycarbonate	Tin-Plated Copper	NSF/ANSI 2	00000000	00000
			-40° F to 110° F/-40° C to 43° C	2° F/1° C	±1%	2 1/2"	4	2 1/2"	3/8"	2 5/8"	3 1/2"	3 3/16"	Panel	3	5/32"	No	Stainless Steel	Acrylic Plastic	Nickel-Plated Copper	—	00000000	00000
			40° F to 240° F/0° C to 115° C	2° F/1° C	±1%	2"	4	2 1/2"	3/8"	2 1/16"	2 15/16"	2 9/16"	Panel	3	5/32"	No	Stainless Steel	Acrylic Plastic	Nickel-Plated Copper	NSF/ANSI 2	00000000	00000
			40° F to 240° F/0° C to 115° C	2° F/1° C	±1%	2 1/2"	4	2 1/2"	3/8"	2 5/8"	3 1/2"	3 3/16"	Panel	3	5/32"	No	Stainless Steel	Acrylic Plastic	Nickel-Plated Copper	NSF/ANSI 2	00000000	00000




					Back Flange Mount

					-40° F to 60° F/-40° C to 15° C	2° F/2° C	±2%	2"	4	2 1/2"	5/16"	2 19/32"	3"	3 3/16"	Panel	3	5/32"	No	Stainless Steel	Polycarbonate	Tin-Plated Copper	NSF/ANSI 2	00000000	00000


					-40° F to 110° F/-40° C to 43° C	2° F/1° C	±1%	2"	4	2 1/2"	3/8"	2 1/16"	2 15/16"	2 9/16"	Panel	3	9/64"	No	Stainless Steel	Acrylic Plastic	Nickel-Plated Copper	NSF/ANSI 2	00000000	00000
					-40° F to 110° F/-40° C to 43° C	2° F/1° C	±1%	2 1/2"	4	2 1/2"	3/8"	2 5/8"	3 1/2"	3 3/16"	Panel	3	11/64"	No	Stainless Steel	Acrylic Plastic	Nickel-Plated Copper	—	00000000	00000
					-40° F to 110° F/-40° C to 43° C	2° F/1° C	±1%	4 1/2"	4	3 1/2"	3/8"	4 5/8"	5 7/8"	5 3/8"	Panel	3	7/32"	No	Stainless Steel	Acrylic Plastic	Nickel-Plated Copper	—	00000000	000000
					40° F to 240° F/0° C to 115° C	2° F/1° C	±1%	2"	4	2 1/2"	3/8"	2 1/16"	3 1/2"	3 3/16"	Panel	3	5/32"	No	Stainless Steel	Acrylic Plastic	Nickel-Plated Copper	NSF/ANSI 2	00000000	00000
					40° F to 240° F/0° C to 115° C	2° F/1° C	±1%	4 1/2"	4	3 1/2"	3/8"	4 5/8"	5 7/8"	5 3/8"	Panel	3	7/32"	No	Stainless Steel	Acrylic Plastic	Nickel-Plated Copper	—	00000000	000000




							Bracket Panel Mount

							-40° F to 60° F/-40° C to 15° C	2° F/1° C	±1%	2 1/2"	4	2 1/2"	3/8"	—	—	—	Panel	1	11/64"	No	Stainless Steel	Acrylic Plastic	Nickel-Plated Copper	NSF/ANSI 2	00000000	00000

Autotuning Temperature Controllers

Ideal in systems with rapid, unpredictable, or complex temperature changes, these controllers turn heating equipment on and off using a proportional-integral-derivative (PID) control algorithm to make fine adjustments, giving you the most precise and stable temperature control. They work similarly to proportional controllers but gather more variables to calculate the most effective way to return to the target temperature and avoid overshooting. They also have fuzzy logic to learn your system's behavior and compensate as needed. Use the autotuning function to have the controller cycle and identify the ideal PID variables for your system. You can also manually select the PID variables. These controllers read temperature with a highly sensitive thermocouple or RTD probe (both not included) in critical process applications. Since they reset automatically, they switch off and on again as the temperature fluctuates. All fit into instrument panels with DIN cutouts. Use the keypad to adjust the actuation point, reset point, other settings.

All meet American, Canadian, and European safety standards.

Mechanical Relay Output


For 1/32 DIN Panel Cutout Size	For 1/16 DIN Panel Cutout Size	For 1/8 DIN Panel Cutout Size

For 3/16 DIN Panel Cutout Size	For 1/4 DIN Panel Cutout Size

Mechanical relay outputs actuate circuits directly. All are single pole, single throw (SPST) relays and turn one circuit from off to on (normally open).

For Alarming—Alarm outputs can also be configured to actuate simple devices.

IP20 Enclosure Rating and IP50 Enclosure Rating—IP20 rated controllers prevent objects about the size of a finger from coming into contact with a live circuit. IP50 rated controllers protect against dust.

				Mechanical Relay
	For Thermocouple Probe Type	Total No. of Outputs	Output Type	Switch Designation	Max. Switching Current @ Voltage	For Probe Type	Reset Type	Input Voltage Range, V AC	Ht.	Wd.	Dp.	Enclosure Rating		Each
For 1/32 DIN Panel Cutout Size–For 7/8" Ht. × 1 3/4" Wd. Panel Cutout



		B, E, J, K, L, N, R, S, T	3	Heating—1 Mechanical Relay Cooling/Alarming—1 Mechanical Relay Alarming—1 Mechanical Relay	SPST-NO	2 amp @ 240V AC	Thermocouple, RTD	Automatic	90 to 250	1 7/8"	15/16"	3 13/16"	IP20, IP50	00000000	0000000


		For 1/16 DIN Panel Cutout Size–For 1 3/4" Ht. × 1 3/4" Wd. Panel Cutout



				B, E, J, K, L, N, R, S, T	2	Heating—1 Mechanical Relay Cooling/Alarming—1 Mechanical Relay	SPST-NO	2 amp @ 240V AC	Thermocouple, RTD	Automatic	90 to 250	1 7/8"	1 7/8"	2 3/8"	IP20, IP50	00000000	000000


				B, E, J, K, N, R, S, T	3	Heating/Cooling—1 Mechanical Relay Alarming—2 Mechanical Relays	SPST-NO	5 amp @ 110V AC	Thermocouple, RTD	Automatic	90 to 264	1 7/8"	1 7/8"	4 3/16"	—	00000000	000000


				For 1/8 DIN Panel Cutout Size–For 1 3/4" Ht. × 3 5/8" Wd. Panel Cutout



						B, E, J, K, L, N, R, S, T	3	Heating—1 Mechanical Relay Cooling/Alarming—1 Mechanical Relay Alarming—1 Mechanical Relay	SPST-NO	2 amp @ 240V AC	Thermocouple, RTD	Automatic	90 to 250	1 7/8"	3 3/4"	2 3/8"	IP20, IP50	00000000	000000


						For 1/8 DIN Panel Cutout Size–For 3 5/8" Ht. × 1 3/4" Wd. Panel Cutout



								B, E, J, K, L, N, R, S, T	3	Heating—1 Mechanical Relay Cooling/Alarming—1 Mechanical Relay Alarming—1 Mechanical Relay	SPST-NO	2 amp @ 240V AC	Thermocouple, RTD	Automatic	90 to 250	3 3/4"	1 7/8"	2 3/8"	IP20, IP50	00000000	000000


								For 3/16 DIN Panel Cutout Size–For 2 11/16" Ht. × 2 11/16" Wd. Panel Cutout



										B, E, J, K, L, N, R, S, T	3	Heating—1 Mechanical Relay Cooling/Alarming—1 Mechanical Relay Alarming—1 Mechanical Relay	SPST-NO	2 amp @ 240V AC	Thermocouple, RTD	Automatic	90 to 250	2 9/16"	2 7/8"	2 3/8"	IP20, IP50	00000000	000000


										For 1/4 DIN Panel Cutout Size–For 3 5/8" Ht. × 3 5/8" Wd. Panel Cutout



												B, E, J, K, L, N, R, S, T	3	Heating—1 Mechanical Relay Cooling/Alarming—1 Mechanical Relay Alarming—1 Mechanical Relay	SPST-NO	2 amp @ 240V AC	Thermocouple, RTD	Automatic	90 to 250	3 3/4"	3 3/4"	2 3/8"	IP20, IP50	00000000	000000


												B, E, J, K, N, R, S, T	4	Heating/Cooling—2 Mechanical Relays Alarming—2 Mechanical Relays	SPST-NO	5 amp @ 110V AC	Thermocouple, RTD	Automatic	90 to 264	3 3/4"	3 3/4"	3 1/2"	—	00000000	000000

Accessories for Temperature Controllers

DIN-Rail/Surface-Mount Adapters for 1/16 DIN Controllers

Mounting Fasteners

Not Included

DIN-Rail/Surface-Mount Adapters for 1/16 DIN Controllers—DIN-rail/surface-mount adapters mount _1/16 DIN controllers to a DIN rail or surface.

Mounting
Fasteners Included	Screw Size	No. of Holes		Each
No	No. 6	2	000000000	000000

DIN Cutout Adapters for 1/16 DIN Controllers

Mounting Fasteners

Included

DIN Cutout Adapters for 1/16 DIN Controllers—DIN cutout adapters convert larger cutouts to fit _1/16 DIN controllers.

	Mounting
For DIN Panel Cutout Size	Fasteners Included	Screw Size	No. of Holes		Each
1/16, 1/4	Yes	No. 8	4	000000000	000000
1/16, 1/8	Yes	No. 8	4	000000000	00000

Solid State Relay Output


For 1/32 DIN Panel Cutout Size	For 1/16 DIN Panel Cutout Size	For 1/8 DIN Panel Cutout Size

For 3/16 DIN Panel Cutout Size	For 1/4 DIN Panel Cutout Size

Solid state relay outputs send a pulse signal to directly control an external solid state relay (not included). They have a longer service life than mechanical and signal relays. Use them for more precise and rapid control switching than mechanical relays.

For Alarming—Alarm outputs can also be configured to actuate simple devices.

				Mechanical Relay
	For Thermocouple Probe Type	Total No. of Outputs	Output Type	Switch Designation	Max. Switching Current @ Voltage	For Probe Type	Reset Type	Input Voltage Range, V AC	Ht.	Wd.	Dp.	Enclosure Rating		Each
For 1/32 DIN Panel Cutout Size–For 7/8" Ht. × 1 3/4" Wd. Panel Cutout



		B, E, J, K, L, N, R, S, T	3	Heating—1 14V DC Solid State Relay Cooling/Alarming—1 Mechanical Relay Alarming—1 Mechanical Relay	SPST-NO	2 amp @ 240V AC	Thermocouple, RTD	Automatic	90 to 250	1 7/8"	15/16"	3 13/16"	IP20, IP50	00000000	0000000


		For 1/16 DIN Panel Cutout Size–For 1 3/4" Ht. × 1 3/4" Wd. Panel Cutout



				B, E, J, K, L, N, R, S, T	2	Heating—1 14V DC Solid State Relay Cooling/Alarming—1 Mechanical Relay	SPST-NO	2 amp @ 240V AC	Thermocouple, RTD	Automatic	90 to 250	1 7/8"	1 7/8"	2 3/8"	IP20, IP50	00000000	000000


				B, E, J, K, L, N, R, S, T	3	Heating—1 14V DC Solid State Relay Cooling/Alarming—1 Mechanical Relay Alarming—1 Mechanical Relay	SPST-NO	2 amp @ 240V AC	Thermocouple, RTD	Automatic	90 to 250	1 7/8"	1 7/8"	2 3/8"	IP20, IP50	00000000	000000


				For 1/8 DIN Panel Cutout Size–For 1 3/4" Ht. × 3 5/8" Wd. Panel Cutout



						B, E, J, K, L, N, R, S, T	3	Heating—1 14V DC Solid State Relay Cooling/Alarming—1 Mechanical Relay Alarming—1 Mechanical Relay	SPST-NO	2 amp @ 240V AC	Thermocouple, RTD	Automatic	90 to 250	1 7/8"	3 3/4"	2 3/8"	IP20, IP50	00000000	000000


						For 1/8 DIN Panel Cutout Size–For 3 5/8" Ht. × 1 3/4" Wd. Panel Cutout



								B, E, J, K, L, N, R, S, T	3	Heating—1 14V DC Solid State Relay Cooling/Alarming—1 Mechanical Relay Alarming—1 Mechanical Relay	SPST-NO	2 amp @ 240V AC	Thermocouple, RTD	Automatic	90 to 250	3 3/4"	1 7/8"	2 3/8"	IP20, IP50	00000000	000000


								For 3/16 DIN Panel Cutout Size–For 2 11/16" Ht. × 2 11/16" Wd. Panel Cutout



										B, E, J, K, L, N, R, S, T	3	Heating—1 14V DC Solid State Relay Cooling/Alarming—1 Mechanical Relay Alarming—1 Mechanical Relay	SPST-NO	2 amp @ 240V AC	Thermocouple, RTD	Automatic	90 to 250	2 9/16"	2 7/8"	2 3/8"	IP20, IP50	00000000	000000


										For 1/4 DIN Panel Cutout Size–For 3 5/8" Ht. × 3 5/8" Wd. Panel Cutout



												B, E, J, K, L, N, R, S, T	3	Heating—1 14V DC Solid State Relay Cooling/Alarming—1 Mechanical Relay Alarming—1 Mechanical Relay	SPST-NO	2 amp @ 240V AC	Thermocouple, RTD	Automatic	90 to 250	3 3/4"	3 3/4"	2 3/8"	IP20, IP50	00000000	000000


												B, E, J, K, L, N, R, S, T	4	Heating—1 14V DC Solid State Relay Cooling/Alarming—1 Mechanical Relay Alarming—2 Mechanical Relays	SPST-NO	2 amp @ 240V AC	Thermocouple, RTD	Automatic	90 to 250	3 3/4"	3 3/4"	2 3/8"	IP20, IP50	00000000	000000

Accessories for Temperature Controllers

DIN-Rail/Surface-Mount Adapters for 1/16 DIN Controllers

Mounting Fasteners

Not Included

DIN-Rail/Surface-Mount Adapters for 1/16 DIN Controllers—DIN-rail/surface-mount adapters mount _1/16 DIN controllers to a DIN rail or surface.

Mounting
Fasteners Included	Screw Size	No. of Holes		Each
No	No. 6	2	000000000	000000

DIN Cutout Adapters for 1/16 DIN Controllers

Mounting Fasteners

Included

DIN Cutout Adapters for 1/16 DIN Controllers—DIN cutout adapters convert larger cutouts to fit _1/16 DIN controllers.

	Mounting
For DIN Panel Cutout Size	Fasteners Included	Screw Size	No. of Holes		Each
1/16, 1/4	Yes	No. 8	4	000000000	000000
1/16, 1/8	Yes	No. 8	4	000000000	00000

Analog Signal Output


For 1/32 DIN Panel Cutout Size	For 1/16 DIN Panel Cutout Size	For 1/8 DIN Panel Cutout Size

For 3/16 DIN Panel Cutout Size	For 1/4 DIN Panel Cutout Size

Analog signal outputs are typically used with SRC (silicon controlled rectifier) power controllers (not included) for some of the highest precision control.

For Alarming—Alarm outputs can also be configured to actuate simple devices.

				Mechanical Relay
	For Thermocouple Probe Type	Total No. of Outputs	Output Type	Switch Designation	Max. Switching Current @ Voltage	For Probe Type	Reset Type	Input Voltage Range, V AC	Ht.	Wd.	Dp.	Enclosure Rating		Each
For 1/32 DIN Panel Cutout Size–For 7/8" Ht. × 1 3/4" Wd. Panel Cutout



		B, E, J, K, L, N, R, S, T	3	Heating—1 4 mA to 20 mA Analog Signal Cooling/Alarming—1 Mechanical Relay Alarming—1 Mechanical Relay	SPST-NO	2 amp @ 240V AC	Thermocouple, RTD	Automatic	90 to 250	1 7/8"	15/16"	3 13/16"	IP20, IP50	00000000	0000000


		For 1/16 DIN Panel Cutout Size–For 1 3/4" Ht. × 1 3/4" Wd. Panel Cutout



				B, E, J, K, L, N, R, S, T	2	Heating—1 4 mA to 20 mA Analog Signal Cooling/Alarming—1 Mechanical Relay	SPST-NO	2 amp @ 240V AC	Thermocouple, RTD	Automatic	90 to 250	1 7/8"	1 7/8"	2 3/8"	IP20, IP50	00000000	000000


				For 1/8 DIN Panel Cutout Size–For 1 3/4" Ht. × 3 5/8" Wd. Panel Cutout



						B, E, J, K, L, N, R, S, T	3	Heating—1 4 mA to 20 mA Analog Signal Cooling/Alarming—1 Mechanical Relay Alarming—1 Mechanical Relay	SPST-NO	2 amp @ 240V AC	Thermocouple, RTD	Automatic	90 to 250	1 7/8"	3 3/4"	2 3/8"	IP20, IP50	00000000	000000


						For 1/8 DIN Panel Cutout Size–For 3 5/8" Ht. × 1 3/4" Wd. Panel Cutout



								B, E, J, K, L, N, R, S, T	3	Heating—1 4 mA to 20 mA Analog Signal Cooling/Alarming—1 Mechanical Relay Alarming—1 Mechanical Relay	SPST-NO	2 amp @ 240V AC	Thermocouple, RTD	Automatic	90 to 250	3 3/4"	1 7/8"	2 3/8"	IP20, IP50	00000000	000000


								For 3/16 DIN Panel Cutout Size–For 2 11/16" Ht. × 2 11/16" Wd. Panel Cutout



										B, E, J, K, L, N, R, S, T	3	Heating—1 4 mA to 20 mA Analog Signal Cooling/Alarming—1 Mechanical Relay Alarming—1 Mechanical Relay	SPST-NO	2 amp @ 240V AC	Thermocouple, RTD	Automatic	90 to 250	2 9/16"	2 7/8"	2 3/8"	IP20, IP50	00000000	000000


										For 1/4 DIN Panel Cutout Size–For 3 5/8" Ht. × 3 5/8" Wd. Panel Cutout



												B, E, J, K, N, R, S, T	3	Heating/Cooling—1 4 mA to 20 mA Analog Signal Alarming—2 Mechanical Relays	SPST-NO	5 amp @ 110V AC	Thermocouple, RTD	Automatic	90 to 264	3 3/4"	3 3/4"	3 1/2"	—	00000000	000000

Accessories for Temperature Controllers

DIN-Rail/Surface-Mount Adapters for 1/16 DIN Controllers

Mounting Fasteners

Not Included

DIN-Rail/Surface-Mount Adapters for 1/16 DIN Controllers—DIN-rail/surface-mount adapters mount _1/16 DIN controllers to a DIN rail or surface.

Mounting
Fasteners Included	Screw Size	No. of Holes		Each
No	No. 6	2	000000000	000000

DIN Cutout Adapters for 1/16 DIN Controllers

Mounting Fasteners

Included

DIN Cutout Adapters for 1/16 DIN Controllers—DIN cutout adapters convert larger cutouts to fit _1/16 DIN controllers.

	Mounting
For DIN Panel Cutout Size	Fasteners Included	Screw Size	No. of Holes		Each
1/16, 1/4	Yes	No. 8	4	000000000	000000
1/16, 1/8	Yes	No. 8	4	000000000	00000

Washdown Autotuning Temperature Controllers

The faceplate on these controllers is sealed to meet NEMA 4X and IP66 for protection in washdown environments with splashing water, corrosive liquid, and dust. The rear case meets IP20, which prevents objects about the size of a finger from coming into contact with a live circuit.

Because they have proportional-integral-derivative (PID) software, these controllers are ideal for turning heating equipment on and off in systems with rapid, unpredictable, and complex temperature changes. They help you achieve precise and stable temperature control with fuzzy logic that learns system behavior and automatically compensates for changes. Use the autotuning function to cycle and identify the ideal PID variables for your system to achieve the most precise control. These controllers read temperature with a highly sensitive thermocouple probe (sold separately) in critical process applications. All fit into instrument panels with DIN cutouts. Use the keypad to adjust the actuation point, reset point, and other settings.

Controllers with Mechanical Relay Heating Output


For 1/32 DIN Panel Cutout Size	For 1/16 DIN Panel Cutout Size

For 1/8 DIN Panel Cutout Size	For 1/4 DIN Panel Cutout Size

Mechanical relay outputs actuate circuits directly.

SPDT—Single pole, double throw (SPDT) relays can be set to turn the circuit from off to on (normally open) or from on to off (normally closed).

SPST-NO—Single pole, single throw (SPST) relays turn one circuit from off to on (normally open).

Automatic Reset—Controllers with automatic reset switch off and on again automatically as the temperature fluctuates.

Manual Reset—Controllers with automatic/manual reset give you the choice to have machines turn back on either automatically when the temperature fluctuates, or you can manually reset their switch. When set to manual they shut down your machine when it gets too hot to protect equipment and personnel. They won’t turn the machine back on until you reset their switch. They have a second output to actuate an alarm or another simple device.

			Mechanical Relay
	Total No. of Outputs	Output Type	Switch Designation	Max. Switching Current @ Voltage	For Probe Type	Reset Type	Input Voltage Range, V AC	Enclosure Rating		Each
For 1/32 DIN Panel Cutout Size–For 7/8" Ht. × 1 3/4" Wd. Panel Cutout



		1	Heating—1 Mechanical Relay	Heating—SPST-NO	Heating— 3 amp @ 220V AC	Thermocouple	Automatic	100 to 240	IP20, IP66, NEMA 4X	0000000	0000000


		For 1/16 DIN Panel Cutout Size–For 1 3/4" Ht. × 1 3/4" Wd. Panel Cutout



				3	Heating—1 Mechanical Relay Alarming—2 Mechanical Relays	Heating—SPST-NO Alarm—SPST-NO	Heating—3 amp @ 250V AC Alarming—1 amp @ 250V AC	Thermocouple, RTD	Automatic, Manual	100 to 240	IP20, IP66, NEMA 4X	0000000	000000


				For 1/8 DIN Panel Cutout Size–For 3 3/4" Ht. × 1 3/4" Wd. Panel Cutout



						3	Heating—1 Mechanical Relay Alarming—2 Mechanical Relays	Heating—SPDT Alarm—SPST-NO	Heating— 5 amp @ 250V AC Alarming— 1 amp @ 250V AC	Thermocouple, RTD	Automatic, Manual	100 to 240	IP20, IP66, NEMA 4X	0000000	000000


						For 1/4 DIN Panel Cutout Size–For 3 3/4" Ht. × 3 3/4" Wd. Panel Cutout



								3	Heating—1 Mechanical Relay Alarming—2 Mechanical Relays	Heating—SPDT Alarm—SPST-NO	Heating—3 amp @ 250V AC Alarming—1 amp @ 250V AC	Thermocouple, RTD	Automatic, Manual	100 to 240	IP20, IP66, NEMA 4X	0000000	000000

Accessories for Temperature Controllers

DIN-Rail/Surface-Mount Adapters for 1/16 DIN Controllers

Mounting Fasteners

Not Included

DIN-Rail/Surface-Mount Adapters for 1/16 DIN Controllers—DIN-rail/surface-mount adapters mount _1/16 DIN controllers to a DIN rail or surface.

Mounting
Fasteners Included	Screw Size	No. of Holes		Each
No	No. 6	2	000000000	000000

DIN Cutout Adapters for 1/16 DIN Controllers

Mounting Fasteners

Included

DIN Cutout Adapters for 1/16 DIN Controllers—DIN cutout adapters convert larger cutouts to fit _1/16 DIN controllers.

	Mounting
For DIN Panel Cutout Size	Fasteners Included	Screw Size	No. of Holes		Each
1/16, 1/4	Yes	No. 8	4	000000000	000000
1/16, 1/8	Yes	No. 8	4	000000000	00000

Controllers with Solid State Relay Heating Output


For 1/32 DIN Panel Cutout Size	For 1/16 DIN Panel Cutout Size

For 1/8 DIN Panel Cutout Size	For 1/4 DIN Panel Cutout Size

Solid state relay outputs send a pulse signal to directly control an external solid state relay (not included). They last longer than mechanical and analog signal relays. Use them for more precise and rapid control switching than mechanical relays.

SPST-NO—Single pole, single throw (SPST) relays turn one circuit from off to on (normally open).

Automatic Reset—Controllers with automatic reset switch off and on again automatically as the temperature fluctuates.

			Mechanical Relay
	Total No. of Outputs	Output Type	Switch Designation	Max. Switching Current @ Voltage	For Probe Type	Reset Type	Input Voltage Range, V AC	Enclosure Rating		Each
For 1/32 DIN Panel Cutout Size–For 7/8" Ht. × 1 3/4" Wd. Panel Cutout



		1	Heating—1 15V DC Solid State Relay	—	—	Thermocouple	Automatic	100 to 240	IP20, IP66, NEMA 4X	0000000	0000000


		For 1/16 DIN Panel Cutout Size–For 1 3/4" Ht. × 1 3/4" Wd. Panel Cutout



				3	Heating—1 12V DC Solid State Relay Alarming—2 Mechanical Relays	SPST-NO	1 amp @ 250V AC	Thermocouple, RTD	Automatic, Manual	100 to 240	IP20, IP66, NEMA 4X	0000000	000000


				For 1/8 DIN Panel Cutout Size–For 3 3/4" Ht. × 1 3/4" Wd. Panel Cutout



						3	Heating—1 12V DC Solid State Relay Alarming—2 Mechanical Relays	SPST-NO	1 amp @ 250V AC	Thermocouple, RTD	Automatic, Manual	100 to 240	IP20, IP66, NEMA 4X	0000000	000000


						For 1/4 DIN Panel Cutout Size–For 3 3/4" Ht. × 3 3/4" Wd. Panel Cutout



								3	Heating—1 12V DC Solid State Relay Alarming—2 Mechanical Relays	SPST-NO	1 amp @ 250V AC	Thermocouple, RTD	Automatic, Manual	100 to 240	IP20, IP66, NEMA 4X	0000000	000000

Accessories for Temperature Controllers

DIN-Rail/Surface-Mount Adapters for 1/16 DIN Controllers

Mounting Fasteners

Not Included

DIN-Rail/Surface-Mount Adapters for 1/16 DIN Controllers—DIN-rail/surface-mount adapters mount _1/16 DIN controllers to a DIN rail or surface.

Mounting
Fasteners Included	Screw Size	No. of Holes		Each
No	No. 6	2	000000000	000000

DIN Cutout Adapters for 1/16 DIN Controllers

Mounting Fasteners

Included

DIN Cutout Adapters for 1/16 DIN Controllers—DIN cutout adapters convert larger cutouts to fit _1/16 DIN controllers.

	Mounting
For DIN Panel Cutout Size	Fasteners Included	Screw Size	No. of Holes		Each
1/16, 1/4	Yes	No. 8	4	000000000	000000
1/16, 1/8	Yes	No. 8	4	000000000	00000

Controllers with Analog Signal Heating Output


For 1/16 DIN Panel Cutout Size	For 1/8 DIN Panel Cutout Size	For 1/4 DIN Panel Cutout Size

Analog signal outputs send 4-20 mA current to actuate equipment on a current loop. They are typically used with SRC (silicon controlled rectifier) power controllers (not included) for some of the highest precision control.

SPST-NO—Single pole, single throw (SPST) relays turn one circuit from off to on (normally open).

Automatic Reset—Controllers with automatic reset switch off and on again automatically as the temperature fluctuates.

			Mechanical Relay
	Total No. of Outputs	Output Type	Switch Designation	Max. Switching Current @ Voltage	For Probe Type	Reset Type	Input Voltage Range, V AC	Enclosure Rating		Each
For 1/16 DIN Panel Cutout Size–For 1 3/4" Ht. × 1 3/4" Wd. Panel Cutout



		3	Heating—1 4 mA to 20 mA Analog Signal Alarming—2 Mechanical Relays	SPST-NO	1 amp @ 250V AC	Thermocouple, RTD	Automatic, Manual	100 to 240	IP20, IP66, NEMA 4X	0000000	0000000


		For 1/8 DIN Panel Cutout Size–For 3 3/4" Ht. × 1 3/4" Wd. Panel Cutout



				3	Heating—1 4 mA to 20 mA Analog Signal Alarming—2 Mechanical Relays	SPST-NO	1 amp @ 250V AC	Thermocouple, RTD	Automatic, Manual	100 to 240	IP20, IP66, NEMA 4X	0000000	000000


				For 1/4 DIN Panel Cutout Size–For 3 3/4" Ht. × 3 3/4" Wd. Panel Cutout



						3	Heating—1 4 mA to 20 mA Analog Signal Alarming—2 Mechanical Relays	SPST-NO	1 amp @ 250V AC	Thermocouple, RTD	Automatic, Manual	100 to 240	IP20, IP66, NEMA 4X	0000000	000000

Accessories for Temperature Controllers

DIN-Rail/Surface-Mount Adapters for 1/16 DIN Controllers

Mounting Fasteners

Not Included

DIN-Rail/Surface-Mount Adapters for 1/16 DIN Controllers—DIN-rail/surface-mount adapters mount _1/16 DIN controllers to a DIN rail or surface.

Mounting
Fasteners Included	Screw Size	No. of Holes		Each
No	No. 6	2	000000000	000000

DIN Cutout Adapters for 1/16 DIN Controllers

Mounting Fasteners

Included

DIN Cutout Adapters for 1/16 DIN Controllers—DIN cutout adapters convert larger cutouts to fit _1/16 DIN controllers.

	Mounting
For DIN Panel Cutout Size	Fasteners Included	Screw Size	No. of Holes		Each
1/16, 1/4	Yes	No. 8	4	000000000	000000
1/16, 1/8	Yes	No. 8	4	000000000	00000

Washdown On/Off Temperature Controllers

Rated IP65 and NEMA 4X to seal out water and dust, these temperature controllers turn your equipment on and off in areas with frequent washdowns. They're the simplest type of temperature controller, so they switch your heater or other device fully on or off without a middle state when they reach a given temperature. These controllers work great as alarms and in systems that can't handle rapid switching or have slow temperature changes. However, you shouldn't use them in processes that require precise control over temperatures.

To read temperature, these controllers use a highly sensitive thermocouple or RTD probe (not included). Their mechanical relay actuates circuits directly. All are SPDT (single pole, double throw) and can turn one circuit from off to on (normally open) or on to off (normally closed). Since these controllers reset automatically, they turn off and on again as the temperature fluctuates. Use the keypad to set the actuation point, reset point, and other settings. Mount them into instrument panel cutouts.

These controllers have UL recognized components and are CSA certified and CE marked, so they meet American, Canadian, and European safety standards.

For Thermocouple Probe

Image of Product. Front orientation. Temperature Controllers. Washdown On/Off Temperature Controllers.

					Mechanical Relay
	Temperature Control Range	For Thermocouple Probe Type	Total No. of Outputs	Output Type	Switch Designation	Max. Switching Current @ Voltage	Reset Type	Input Voltage, V AC	Enclosure Rating		Each
For 2 11/16" Ht. × 2 11/16" Wd. Panel Cutout



		32° F to 390° F 0° C to 200° C	J	1	Heating—1 Mechanical Relay	SPDT	8 amp @ 240V AC 8 amp @ 30V DC	Automatic	120	IP65, NEMA 4X	000000	0000000


		32° F to 2,190° F 0° C to 1,200° C	K	1	Heating—1 Mechanical Relay	SPDT	8 amp @ 240V AC 8 amp @ 30V DC	Automatic	120	IP65, NEMA 4X	000000	000000

For RTD Probe

					Mechanical Relay
	Temperature Control Range	For RTD Probe Resistance, ohm	Total No. of Outputs	Output Type	Switch Designation	Max. Switching Current @ Voltage	Reset Type	Input Voltage, V AC	Enclosure Rating		Each
For 2 11/16" Ht. × 2 11/16" Wd. Panel Cutout



		32° F to 1,470° F 0° C to 800° C	100	1	Heating—1 Mechanical Relay	SPDT	8 amp @ 240V AC 8 amp @ 30V DC	Automatic	120	IP65, NEMA 4X	000000	0000000

Quick-Response Food and Beverage Panel-Mount Thermometers

A resistance temperature detector (RTD) probe responds to temperature change faster than dial thermometers.

					Probe							Material
Temp. Range	Resolution/Temp. Resolution	Accuracy	Digit Ht.	Cable Lg., ft.	Lg.	Dia.	Panel Cutout Dia.	Mount Type	For RTD Probe Resistance, ohm	Response Time, sec.	Max. Pressure @ Temp.	Housing	Probe	Includes	Operating Voltage, V AC	Electrical Connection Type		Each



	-40° F to 250° F	1° F	±2° F	1/2"	8	2 5/8"	1/4"	2 3/32"	Panel	1,000	1	Not Rated	Plastic	Stainless Steel	Bracket Assembly	120	Plug In	000000000	0000000


	-40° C to 120° C	1° F	±2° C	1/2"	8	2 5/8"	1/4"	2 3/32"	Panel	1,000	1	Not Rated	Plastic	Stainless Steel	Bracket Assembly	120	Plug In	000000000	000000

High-Accuracy Panel-Mount Thermometers with Calibration Certificate

Obtain the most accurate readings possible with these thermometers that include a calibration certificate traceable to NIST that states they’ve passed a test to fall within ±0.5° F accuracy. The thermometer probe is connected to a cable, so the display can be mounted away from your system for remote viewing.

						Probe					Mounting Holes							Material			Batteries
Temp. Range	Resolution/Temp. Resolution	Accuracy	Dial Dia.	Digit Ht.	Cable Lg., ft.	Lg.	Dia.	Flange OD	Bolt Circle Dia.	Mount Type	No. of	Dia.	Fasteners Included	Pipe Size	Thread Type	Gender	Max. Pressure @ Temp.	Housing	Lens	Probe	Included	Size	No. of		Each







			Back Flange Mount

			-75° F to 750° F	0.1	±0.5° F	4 1/2"	1"	5	4"	1/4"	4 1/2"	5 3/8"	Panel	3	1/4"	No	1/2	NPT	Male	Not Rated	Plastic	Glass	Stainless Steel	Yes	1/2 AA	1	0000000	0000000


			-75° F to 750° F	0.1	±0.5° F	4 1/2"	1"	10	4"	1/4"	4 1/2"	5 3/8"	Panel	3	1/4"	No	1/2	NPT	Male	Not Rated	Plastic	Glass	Stainless Steel	Yes	1/2 AA	1	0000000	000000
			-75° F to 750° F	0.1	±0.5° F	4 1/2"	1"	15	4"	1/4"	4 1/2"	5 3/8"	Panel	3	1/4"	No	1/2	NPT	Male	Not Rated	Plastic	Glass	Stainless Steel	Yes	1/2 AA	1	0000000	000000
			-75° F to 750° F	0.1	±0.5° F	4 1/2"	1"	20	4"	1/4"	4 1/2"	5 3/8"	Panel	3	1/4"	No	1/2	NPT	Male	Not Rated	Plastic	Glass	Stainless Steel	Yes	1/2 AA	1	0000000	000000
			-75° F to 750° F	0.1	±0.5° F	4 1/2"	1"	25	4"	1/4"	4 1/2"	5 3/8"	Panel	3	1/4"	No	1/2	NPT	Male	Not Rated	Plastic	Glass	Stainless Steel	Yes	1/2 AA	1	0000000	000000

Panel-Mount Thermometers

For mounting on instrument and control panels, these thermometers have a back flange.

			Stem						Mounting Holes				Material
Temp. Range	Graduations	Accuracy	Lg.	Dia.	Dial Dia.	Flange OD	Bolt Circle Dia.	Mount Type	No. of	Dia.	Fasteners Included	Max. Pressure @ Temp.	Housing	Stem	Lens		Each







			Back Flange Mount

			-40° F to 160° F	2° F	±4° F	9"	1/4"	2 1/2"	3 5/16"	3"	Panel	3	5/32"	No	Not Rated	Stainless Steel	Stainless Steel	Glass	0000000	000000


			-40° F to 160° F/-40° C to 70° C	2° F	±4° F	6"	1/4"	3"	3 5/16"	2 1/2"	Panel	3	5/32"	No	Not Rated	Stainless Steel	Stainless Steel	Glass	0000000	00000
			0° F to 200° F	2° F	±4° F	6"	1/4"	2 1/2"	3 5/16"	3"	Panel	3	5/32"	No	Not Rated	Stainless Steel	Stainless Steel	Glass	0000000	00000
			0° F to 200° F	2° F	±4° F	9"	1/4"	2 1/2"	3 5/16"	3"	Panel	3	5/32"	No	Not Rated	Stainless Steel	Stainless Steel	Glass	0000000	00000
			0° F to 200° F/-15° C to 93° C	2° F	±4° F	4"	1/4"	3"	3 5/16"	2 1/2"	Panel	3	5/32"	No	Not Rated	Stainless Steel	Stainless Steel	Glass	0000000	00000

High-Limit Temperature Controllers

To protect equipment and personnel, these controllers shut down your machine when it gets too hot. Reset them manually to turn your machine on again. They're often used as a fail-safe system and for triggering alarms.

Set the actuation point and adjust other settings with the keypad. To read the temperature, these controllers use a highly sensitive thermocouple probe (sold separately). They have one or two mechanical relays that actuate circuits directly. Mount them into instrumentation panels with DIN cutouts.

Mechanical Relay Output


For 1/16 DIN Panel Cutout Size	For 1/4 DIN Panel Cutout Size

SPDT—Controllers that are SPDT (single pole, double throw) can turn one circuit from off to on (normally open) or on to off (normally closed).

SPST-NO—Controllers that are SPST-NO (single pole, single throw) can turn one circuit from off to on (normally open).

Remote Reset—Remote-reset controllers are best for hard-to-reach locations. To operate, you’ll need to wire the remote reset input terminals, and the sensor must be below the set temperature.

				Mechanical Relay
	For Thermocouple Probe Type	Total No. of Outputs	Output Type	Switch Designation	Max. Switching Current @ Voltage	For Probe Type	Reset Type	Input Voltage Range, V AC	Ht.	Wd.	Dp.	Enclosure Rating	Features		Each
For 1/16 DIN Panel Cutout Size–For 1 3/4" Ht. × 1 3/4" Wd. Panel Cutout



		B, C, E, J, K, L, N, PL-II, R, S, T	1	Heating—1 Mechanical Relay	SPDT	2 amp @ 240V AC	Thermocouple	Manual	90 to 264	1 7/8"	1 7/8"	3 3/4"	IP20, IP30	Indicator Icons, Remote Reset	0000000	0000000


		B, C, E, J, K, L, N, PL-II, R, S, T	2	Heating—1 Mechanical Relay Heating—1 Mechanical Relay	SPDT SPST-NO	2 amp @ 240V AC	Thermocouple	Manual	90 to 264	1 7/8"	1 7/8"	3 3/4"	IP20, IP30	—	0000000	000000


		For 1/4 DIN Panel Cutout Size–For 3 5/8" Ht. × 3 5/8" Wd. Panel Cutout



				B, C, E, J, K, L, N, PL-II, R, S, T	2	Heating—1 Mechanical Relay Heating—1 Mechanical Relay	SPDT	2 amp @ 240V AC	Thermocouple	Manual	90 to 250	3 3/4"	3 3/4"	2 9/16"	IP20, IP30	Remote Reset	0000000	000000

Accessories for Temperature Controllers

DIN-Rail/Surface-Mount Adapters for 1/16 DIN Controllers

Mounting Fasteners

Not Included

DIN-Rail/Surface-Mount Adapters for 1/16 DIN Controllers—To mount _1/16 DIN controllers to a surface or DIN rail, add DIN-rail/surface-mount adapters.

Mounting
Fasteners Included	Screw Size	No. of Holes		Each
No	No. 6	2	000000000	000000

DIN Cutout Adapters for 1/16 DIN Controllers

Mounting Fasteners

Included

DIN Cutout Adapters for 1/16 DIN Controllers—To convert larger cutouts to fit _1/16 DIN controllers, add DIN cutout adapters.

	Mounting
For DIN Panel Cutout Size	Fasteners Included	Screw Size	No. of Holes		Each
1/16, 1/4	Yes	No. 8	4	000000000	000000
1/16, 1/8	Yes	No. 8	4	000000000	00000

Proportional Temperature Controllers

Cycle heaters on and off intermittently to maintain a set temperature in your system. These proportional controllers keep your heater on when your system is below the set temperature, and they turn it off in short cycles when your system nears the set temperature. The short cycles make them more precise and allow less temperature fluctuation than on/off controllers. Use them on electric heaters only—they don't work with valves or solenoids.

Turn the dial on these controllers to choose your set temperature. They use a highly sensitive thermocouple probe (not included) to read temperature. Their mechanical relay actuates circuits directly. All are SPDT (single pole, double throw) and can turn one circuit from off to on (normally open) or on to off (normally closed). Install these controllers into instrument panels with DIN cutouts.

All controllers meet American, Canadian, and European safety standards.

Mechanical Relay Output

					Mechanical Relay
	Temp. Control Range, ° F	For Thermocouple Probe Type	Total No. of Outputs	Output Type	Switch Designation	Max. Switching Current @ Voltage	For Probe Type	Reset Type	Input Voltage Range, V AC	Ht.	Wd.	Dp.	Features		Each
For 1/16 DIN Panel Cutout Size–For 1 3/4" Ht. × 1 3/4" Wd. Panel Cutout



		50 to 850	J	1	Heating—1 Mechanical Relay	SPDT	5 amp @ 240V AC	Thermocouple	Automatic	200 to 240	1 7/8"	1 7/8"	3 3/4"	LED Status Indicator	0000000	0000000

Accessories for Temperature Controllers

DIN-Rail/Surface-Mount Adapters for 1/16 DIN Controllers

Mounting Fasteners

Not Included

DIN-Rail/Surface-Mount Adapters for 1/16 DIN Controllers—DIN-rail/surface-mount adapters mount _1/16 DIN controllers to a DIN rail or surface.

Mounting
Fasteners Included	Screw Size	No. of Holes		Each
No	No. 6	2	000000000	000000

DIN Cutout Adapters for 1/16 DIN Controllers

Mounting Fasteners

Included

DIN Cutout Adapters for 1/16 DIN Controllers—DIN cutout adapters convert larger cutouts to fit _1/16 DIN controllers.

	Mounting
For DIN Panel Cutout Size	Fasteners Included	Screw Size	No. of Holes		Each
1/16, 1/4	Yes	No. 8	4	000000000	000000
1/16, 1/8	Yes	No. 8	4	000000000	00000

Remote-Reading Panel-Mount Freezer Thermometers with Audible Alarm

Protect temperature-sensitive materials in refrigerators and freezers with one of these thermometers that sound an alarm and flash the display when temperature rises above your activation point.

					Probe		Mounting Holes			For Panel Cutout				Input
Temp. Range	Actuation Point Temp. Range	Temp. Resolution	Accuracy	Cable Lg., ft.	Dia.	Lg.	No. of	Dia.	Fasteners Included	Ht.	Wd.	Ht.	Wd.	AC Voltage, V AC	DC Voltage, V DC	Electrical Connection	Freq., Hz		Each
-25° F to 99° F/-32° C to 38° C	-15° F to 50° F/ -26° C to 10° C	1° F/1° C	±3° F	6	3/8"	7/8"	2	7/32"	No	3 7/8"	2 7/8"	5"	3 1/8"	10.5 to 28	12 to 28	Wire Leads	60	000000	0000000

Supplies

On/Off Temperature Controllers for Plug-in Heaters


IP20, NEMA 1—DIN-Rail and Wall Mount	IP66, NEMA 4X—Wall Mount

Switch heaters on or off when your process reaches a certain temperature. Both these controllers and your heater will be powered by the same wall outlet. Place the probe into your process, plug the controller into an outlet, and plug your heater into the socket on the back of the controller’s plug. These simple temperature controllers deliver either full power or no power. They’re best used in systems where temperatures change slowly and you don’t need precise control.

IP20 Enclosure Rating and NEMA 1 Enclosure Rating—IP20 and NEMA 1 rated controllers are best for indoor use. They keep dirt out and will stop objects about the size of a finger from coming into contact with a live circuit.

IP66 Enclosure Rating and NEMA 4X Enclosure Rating—IP66 and NEMA 4X rated controllers seal out dirt, corrosive liquids, and water from high-pressure washdowns.

			Mechanical Relay			Probe
	Temperature Control Range	Output Type	Switch Designation	Max. Switching Current @ Voltage	Reset Type	Dia.	Lg.	Cable Lg., ft.	Input Voltage, V AC	Ht.	Wd.	Dp.		Each
IP20, NEMA 1—DIN-Rail and Wall Mount



		-40° F to 212° F -40° C to 100° C	Heating—1 Mechanical Relay	SPDT-NO	12 amp @ 120V AC	Automatic	1/4"	2"	6	120	5"	2 7/16"	2 1/2"	0000000	0000000


		IP66, NEMA 4X—Wall Mount



				-40° F to 212° F -40° C to 100° C	Heating—1 Mechanical Relay	SPDT-NO	12 amp @ 120V AC	Automatic	1/4"	2"	6	120	6 5/8"	2 13/16"	2 13/16"	0000000	000000