Filter by
Fuse Type
Mounting Location
System of Measurement
Fuse Overall Diameter
Current per Circuit
DIN Rail Height
DIN Rail Trade Size
Certification
Electrical Connection
Wire Connection
Color
Grounding
Number of Terminals per Circuit
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Flammability Rating
For Maximum Screwdriver Size
Manufacturer Model Number
REACH
RoHS
U.S.–Mexico–Canada Agreement (USMCA) Qualifying
Quick-Connect Modular DIN-Rail Mount Terminal Blocks
 |
Pop wire in and out of these terminal blocks without adjusting a screw for faster installation. Once clamped in place, the wire will stay put when vibrated, bent, or pulled.
Mix and match these terminal blocks to get the exact number of circuits you need in a single setup. Add blocks for thermocouples, fuses, and grounding wire as needed. The blocks clip side by side onto DIN rail in control panels, creating tidy rows of circuits that you can identify and access on the spot.
Fuse Terminal Blocks with Spring-Clamp Terminals
 |
Install a fuse in the built-in fuse holder so excess current doesn't damage your equipment. If the current exceeds the limit, the fuse will blow and cut power to connected components.
Faster to install than screw terminals. Lift the clamp with a screwdriver, then release the clamp down onto the inserted wire.
Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.
End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.
Adjacent Jumpers—Metal poles create an electrical connection between adjacent terminal blocks, so you can connect multiple components with a single wire. Blocks must be the same width for the jumpers to fit.
Terminal Blocks | Covers | End Stops | Adjacent Jumpers | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Fuse | Each | ||||||||||||||||||||
No. of Circuits | No. of Terminals per Circuit | For Wire Ga. | Wd., mm | Ht., mm | Trade Size | Overall Dia. | Type | Color | For DIN Rail Trade Size | 1-9 | 10-Up | Each | Each | Insulation | Each | ||||||
600V AC/600V DC—10 amp per Circuit | |||||||||||||||||||||
| 1 | 2 | 28 to 12 | 10 | 60 | 3AG | 1/4" | Glass | Gray | 3 | 9553T3 | 000000 | 000000 | 9553T2 | 00000 | 9473T144 | 00000 | Insulated | 9473T115 | 00000 | ||
 |  |  |
Blank | Numbered for Horizontal Rails | Numbered for Vertical Rails |
Each | |||||||||
|---|---|---|---|---|---|---|---|---|---|
For Terminal Block Wd., mm | Number Range | Includes | Markers per Card | Color | 1-24 | 25-Up | |||
Blank | |||||||||
| 5, 6, 8, 10, 12, 16, 25 | — | — | 100 | White | 9473T145 | 00000 | 00000 | ||
Numbered for Horizontal Rails | |||||||||
| 5, 6, 8, 10, 12, 16, 25 | 1 to 50 | Two of Each Number | 100 | White | 9473T146 | 00000 | 0000 | ||
Numbered for Vertical Rails | |||||||||
| 5, 6, 8, 10, 12, 16, 25 | 1 to 50 | Two of Each Number | 100 | White | 9473T147 | 00000 | 00000 | ||
