Filter by
Color
Number of Terminals per Circuit
Mounting Location
Grounding
System of Measurement
DIN Rail Height
Wire Connection
DIN Rail Trade Size
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Flammability Rating
For Maximum Screwdriver Size
Manufacturer
Manufacturer Model Number
Maximum Temperature
Minimum Temperature
REACH
U.S.–Mexico–Canada Agreement (USMCA) Qualifying
Wire Entry Location
Certification
Quick-Connect Modular DIN-Rail Mount Terminal Blocks
 |
Pop wire in and out of these terminal blocks without adjusting a screw for faster installation. Once clamped in place, the wire will stay put when vibrated, bent, or pulled.
Mix and match these terminal blocks to get the exact number of circuits you need in a single setup. Add blocks for thermocouples, fuses, and grounding wire as needed. The blocks clip side by side onto DIN rail in control panels, creating tidy rows of circuits that you can identify and access on the spot.
Ground Terminal Blocks with Spring-Clamp Terminals
 |
Connect grounding wire to DIN rail so fault currents can safely flow to ground. These terminal blocks should only be used for grounding circuits.
Faster to install than screw terminals. Lift the clamp with a screwdriver, then release the clamp down onto the inserted wire.
Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.
End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.
Adjacent Jumpers—Metal poles create an electrical connection between adjacent terminal blocks, so you can connect multiple components with a single wire. Blocks must be the same width for the jumpers to fit.
Terminal Blocks | Covers | End Stops | Adjacent Jumpers | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Each | ||||||||||||||||||
No. of Circuits | No. of Terminals per Circuit | For Wire Ga. | Wd., mm | Ht., mm | Color | For DIN Rail Trade Size | 1-24 | 25-Up | Each | Each | Insulation | Each | ||||||
| 1 | 4 | 28 to 12 | 6 | 86 | Green/Yellow | 3 | 9473T88 | 000000 | 000000 | 9473T136 | 00000 | 9473T144 | 00000 | Insulated | 9473T117 | 00000 | ||
 |  |  |
Blank | Numbered for Horizontal Rails | Numbered for Vertical Rails |
Each | |||||||||
|---|---|---|---|---|---|---|---|---|---|
For Terminal Block Wd., mm | Number Range | Includes | Markers per Card | Color | 1-24 | 25-Up | |||
Blank | |||||||||
| 5, 6, 8, 10, 12, 16, 25 | — | — | 100 | White | 9473T145 | 00000 | 00000 | ||
Numbered for Horizontal Rails | |||||||||
| 5, 6, 8, 10, 12, 16, 25 | 1 to 50 | Two of Each Number | 100 | White | 9473T146 | 00000 | 0000 | ||
Numbered for Vertical Rails | |||||||||
| 5, 6, 8, 10, 12, 16, 25 | 1 to 50 | Two of Each Number | 100 | White | 9473T147 | 00000 | 00000 | ||
