TE Connectivity Terminal Blocks

Filter by

Number of Terminals per Circuit

Color

System of Measurement

DIN Rail Height

Number of Circuits

For Wire Gauge

1/0

Mounting Location

DIN Rail

DIN Rail Trade Size

Voltage

Width

Wire Connection

Spring-Clamp Terminal

Current per Circuit

Performance

Electrical Connection

Screw-Clamp Terminal

Spring-Clamp Terminal

Certification

CE Marked

CSA Certified

CSA-US Certified

UL Recognized Component

Length

Blown Fuse Indicator Voltage

Grounding

Height

Fuse Type

RoHS

Compliant with Exemptions

Export Control Classification Number (ECCN)

EAR99

Manufacturer

Altech

American Electrical

BlockMaster Electronics

c3controls

Eaton

Lite Cycle

Marathon Special Products

Thermocouple Technology

WAGO

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

REACH

Compliant

Not Compliant

DFARS Specialty Metals

Exempt

Forward

How can we improve?

121 Products

Performance

Quick Connect

Snap in wire with a clamp instead of fussing with a screw

15 products

Space Saving

Consolidate wiring in a narrower footprint than normal-size blocks

37 products

Performance

Touch Safe

Recessed terminals protect you from shocks

116 products

Overload Protection

If power surges, a fuse blows to cut power and prevent damage

28 products

Modular DIN-Rail Mount Terminal Blocks

Mix and match these terminal blocks to get the exact number of circuits you need in a single setup. Add blocks for thermocouples, fuses, and grounding wire as needed. The blocks clip side by side onto DIN rail in control panels, creating tidy rows of circuits that you can identify and access on the spot.

The screw-clamp terminals flatten your wire so it stays put when vibrated or pulled. If you need to change wiring frequently without adjusting a screw, consider a quick-connect terminal block with spring-clamp or lever-clamp terminals.

Terminal Blocks with Screw-Clamp Terminals

Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.

End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.

Bar Jumpers—Metal poles create an electrical connection between blocks, so you can connect multiple components with a single wire. Blocks must be the same width for the jumpers to fit. Cut jumpers to size with a hacksaw or high-force wire cutter. Add covers so jumpers don't touch the screws on the outermost blocks.

Insulation—Terminal blocks with insulated jumpers maintain their IP20 rating to prevent shocks and short circuits. Blocks with noninsulated jumpers lose their IP20 rating for touch protection because the jumpers introduce exposed metal to the circuit.

	Terminal Blocks											Covers		End Stops		Bar Jumpers
										Each
	No. of Circuits	No. of Terminals per Circuit	For Wire Ga.	Wd., mm	Ht., mm	For DIN Rail Trade Size	Enclosure Rating	Choose a Color		1-24	25-Up		Each		Each	Insulation		Each







				380V AC—22 amp per Circuit

				3	2	20 to 12	6	81	3	IP20	Gray	7641K361	00000	00000	7641K275	00000	7641K73	00000	Noninsulated	7641K281	00000




						600V AC—32 amp per Circuit

						1	6	22 to 12	6	87.5	1, 3	IP20	Black	7641K843	00000	00000	———	0	———	0	—	———	0




								630V AC/630V DC—24 amp per Circuit

								2	2	22 to 12	5	65.5	1, 3	IP20	Beige	7641K846	0000	0000	7641K72	0000	7641K757	0000	Insulated	7641K758	00000


								2	2	22 to 12	5	65.5	1, 3	IP20	Blue	7641K845	0000	0000	7641K72	0000	7641K757	0000	Insulated	7641K758	00000
								2	2	22 to 12	5	65.5	1, 3	IP20	Gray	7641K844	0000	0000	7641K72	0000	7641K757	0000	Insulated	7641K758	00000




										800V AC—32 amp per Circuit

										2	2	22 to 12	6	65.5	1, 3	IP20	Beige, Black, Blue, Gray, Green, Orange, Red, White, Yellow	7641K71	0000	0000	7641K72	0000	7641K73	0000	Noninsulated	7641K74	00000




												800V AC/800V DC—32 amp per Circuit

												1	3	22 to 10	6	51.5	1, 3	IP20	Gray	7641K841	0000	0000	7641K754	0000	7641K35	0000	Insulated	7641K755	00000


												1	4	22 to 10	6	63.5	1, 3	IP20	Gray	7641K842	0000	0000	7641K756	0000	7641K35	0000	Insulated	7641K755	00000




														800V AC—41 amp per Circuit

														2	2	18 to 8	8	88	1, 3	IP20	Gray	7641K241	0000	0000	7641K251	0000	7641K73	0000	Noninsulated	7641K16	00000




																1,000V AC—24 amp per Circuit

																1	2	22 to 12	5	44.5	1, 3	IP20	Beige, Black, Blue, Gray, Orange, Red, White, Yellow	7641K921	0000	0000	7641K31	0000	7641K35	0000	Noninsulated	7641K925	00000




																		1,000V AC—32 amp per Circuit

1	2																	22 to 10	6	44.5	1, 3	IP20	Beige, Black, Blue, Gray, Green, Orange, Red, White, Yellow	7641K51	0000	0000	7641K31	0000	7641K35	0000	Noninsulated	7641K15	00000




		1,000V AC—41 amp per Circuit

		1	2															22 to 8	8	44.5	1, 3	IP20	Beige, Black, Blue, Gray, Green, Orange, Red, White, Yellow	7641K52	0000	0000	7641K31	0000	7641K35	0000	Noninsulated	7641K16	00000




				1,000V AC—57 amp per Circuit

				1	2													20 to 6	10	44.5	1, 3	IP20	Beige, Black, Blue, Gray, Red, White, Yellow	7641K53	0000	0000	7641K31	0000	7641K35	0000	Noninsulated	7641K17	00000




																		1,000V AC—76 amp per Circuit

						1	2											18 to 6	12	45.5	1, 3	IP20	Black, Blue, Gray, Red, White, Yellow	7641K151	0000	0000	7641K192	0000	7641K35	0000	Noninsulated	7641K221	00000




																		1,000V AC—125 amp per Circuit

																		1	2	10 to 1/0	16	49	1, 3	IP20	Black, Blue, Gray, Red, White, Yellow	7641K161	0000	0000	———	0	7641K35	0000	Noninsulated	7641K231	00000

Markers

Label your terminal block connections so you can identify them at a glance.

							Each
	For No. of Circuits	For Terminal Block Wd., mm	Number Range	Markers per Card	Color		1-24	25-Up
Blank



		1, 2	5	—	100	White	7641K983	00000	00000


		1, 2	6	—	100	White	7641K19	0000	0000
		1, 2	8, 10, 12, 13, 16, 22	—	100	White	7641K981	0000	0000


		Numbered for Horizontal Rails



				1, 2	5	1 to 100	100	White	7641K95	0000	0000


				1, 2	5	101 to 200	100	White	7641K96	0000	0000
				1, 2	6	1 to 100	100	White	7641K75	0000	0000
				1, 2	6	101 to 200	100	White	7641K76	0000	0000
				1, 2	8, 10, 12, 13, 16, 22	1 to 100	100	White	7641K991	0000	0000
				1, 2	8, 10, 12, 13, 16, 22	101 to 200	100	White	7641K992	0000	0000


				Numbered for Vertical Rails



						1, 2	5	1 to 100	100	White	7641K97	0000	0000


						1, 2	5	101 to 200	100	White	7641K98	0000	0000
						1, 2	6	1 to 100	100	White	7641K77	0000	0000
						1, 2	6	101 to 200	100	White	7641K78	0000	0000
						1, 2	8, 10, 12, 13, 16, 22	1 to 100	100	White	7641K993	0000	0000
						1, 2	8, 10, 12, 13, 16, 22	101 to 200	100	White	7641K994	0000	0000

Ground Terminal Blocks with Screw-Clamp Terminals

Connect grounding wire to DIN rail so fault currents can safely flow to ground. These terminal blocks should only be used for grounding circuits.

End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.

Terminal Blocks											End Stops
									Each
No. of Circuits	No. of Terminals per Circuit	For Wire Ga.	Wd., mm	Ht., mm	Color	For DIN Rail Trade Size	Enclosure Rating		1-24	25-Up		Each



	1	2	22 to 12	5	43.5	Green/Yellow	1, 3	IP20	7641K931	00000	00000	7641K35	00000


	1	2	22 to 12	6	43.8	Green/Yellow	1, 3	IP20	7641K81	0000	0000	7641K35	0000
	1	2	22 to 8	8	43.8	Green/Yellow	1, 3	IP20	7641K82	0000	0000	7641K35	0000
	1	2	20 to 6	10	43.8	Green/Yellow	1, 3	IP20	7641K83	0000	0000	7641K35	0000
	1	2	14 to 4	12	49.5	Green/Yellow	1, 3	IP20	7641K171	00000	0000	7641K35	0000
	1	2	8 to 1/0	16	49	Green/Yellow	1, 3	IP20	7641K181	00000	00000	7641K35	0000
	1	4	22 to 10	6	63.5	Green/Yellow	1, 3	IP20	7641K847	00000	0000	7641K35	0000
	1	7	22 to 12	6	90	Green/Yellow	1, 3	IP20	7641K848	00000	00000	7641K757	0000

Markers

Label your terminal block connections so you can identify them at a glance.

							Each
	For No. of Circuits	For Terminal Block Wd., mm	Number Range	Markers per Card	Color		1-24	25-Up
Blank



		1, 2	5	—	100	White	7641K983	00000	00000


		1, 2	6	—	100	White	7641K19	0000	0000
		1, 2	8, 10, 12, 13, 16, 22	—	100	White	7641K981	0000	0000


		Numbered for Horizontal Rails



				1, 2	5	1 to 100	100	White	7641K95	0000	0000


				1, 2	5	101 to 200	100	White	7641K96	0000	0000
				1, 2	6	1 to 100	100	White	7641K75	0000	0000
				1, 2	6	101 to 200	100	White	7641K76	0000	0000
				1, 2	8, 10, 12, 13, 16, 22	1 to 100	100	White	7641K991	0000	0000
				1, 2	8, 10, 12, 13, 16, 22	101 to 200	100	White	7641K992	0000	0000


				Numbered for Vertical Rails



						1, 2	5	1 to 100	100	White	7641K97	0000	0000


						1, 2	5	101 to 200	100	White	7641K98	0000	0000
						1, 2	6	1 to 100	100	White	7641K77	0000	0000
						1, 2	6	101 to 200	100	White	7641K78	0000	0000
						1, 2	8, 10, 12, 13, 16, 22	1 to 100	100	White	7641K993	0000	0000
						1, 2	8, 10, 12, 13, 16, 22	101 to 200	100	White	7641K994	0000	0000

Fuse Terminal Blocks with Screw-Clamp Terminals

Install a fuse in the built-in fuse holder so excess current doesn't damage your equipment. If the current exceeds the limit, the fuse will blow and cut power to connected components.

Blown Fuse Indicator—A light goes on when the fuse blows, so you can spot an overloaded circuit without cutting power or touching equipment.

Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.

End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.

	Terminal Blocks																	Covers		End Stops		Bar Jumpers
						For Fuse										Each
	No. of Circuits	No. of Terminals per Circuit	For Wire Ga.	Wd., mm	Ht., mm	Trade Size	Overall Dia.	Overall Lg.	Type	Circuit Status Indicator Type	Blown Fuse Indicator Voltage	For DIN Rail Trade Size	Enclosure Rating	Choose a Color		1-24	25-Up		Each		Each	Insulation		Each







				300V AC/300V DC—6.3 amp per Circuit

				2 1 (Ground)	2 1 (Ground)	20 to 12	8	99	—	5 mm	20 mm	Ceramic, Glass	—	—	3	IP20	Gray	7641K861	000000	000000	7641K765	00000	7641K757	00000	Noninsulated	7641K16	000000


				2 1 (Ground)	2 1 (Ground)	20 to 12	8	99	—	5 mm	20 mm	Ceramic, Glass	Blown Fuse	24V DC 60V DC 110V AC	3	IP20	Gray	7641K864	00000	00000	7641K765	0000	7641K757	0000	Noninsulated	7641K16	00000
				2 1 (Ground)	2 1 (Ground)	20 to 12	8	99	—	5 mm	20 mm	Ceramic, Glass	Blown Fuse	110V AC 230V AC	3	IP20	Gray	7641K865	00000	00000	7641K765	0000	7641K757	0000	Noninsulated	7641K16	00000




						400V AC/400V DC—6.3 amp per Circuit

						1	2	22 to 12	8	56	—	5 mm	20 mm	Ceramic, Glass	Blown Fuse	24V AC 24V DC	1, 3	IP20	Gray	7641K943	00000	00000	7641K37	0000	7641K35	0000	—	———	0


						1	2	22 to 12	8	56	—	5 mm	20 mm	Ceramic, Glass	Blown Fuse	110V AC 230V AC	1, 3	IP20	Gray	7641K942	00000	00000	7641K37	0000	7641K35	0000	—	———	0




								600V AC—6.3 amp per Circuit

								2	2	24 to 12	8	85.5	—	5 mm	20 mm	Ceramic, Glass	Blown Fuse	110V AC 230V AC	1, 3	IP20	Gray	7641K863	00000	00000	7641K759	0000	7641K757	0000	Insulated	7641K764	00000


								2	2	12	8	85.5	—	5 mm	20 mm	Ceramic, Glass	Blown Fuse	24V AC 24V DC	1, 3	IP20	Gray	7641K862	00000	00000	7641K759	0000	7641K757	0000	Insulated	7641K764	00000




										630V AC—6.3 amp per Circuit

										1	2	22 to 12	8	56	—	5 mm	20 mm	Ceramic, Glass	—	—	1, 3	IP20	Gray, Orange	7641K55	0000	0000	7641K37	0000	7641K35	0000	—	———	0




												630V AC/630V DC—6.3 amp per Circuit

												2	2	24 to 12	8	85.5	—	5 mm	20 mm	Ceramic, Glass	—	—	1, 3	IP20	Gray	7641K849	00000	00000	7641K759	0000	7641K757	0000	Insulated	7641K764	00000




														800V AC/800V DC—10 amp per Circuit

														1	2	22 to 10	13	85.1	3AG	1/4"	—	Glass	Blown Fuse	24V AC 24V DC	1, 3	IP20	Black	7641K946	00000	00000	7641K49	0000	7641K35	0000	—	———	0


														1	2	22 to 10	13	85.1	3AG	1/4"	—	Glass	Blown Fuse	110V AC 230V AC	1, 3	IP20	Black	7641K945	00000	00000	7641K49	0000	7641K35	0000	—	———	0




																800V AC—16 amp per Circuit

1																2	22 to 10	13	85.1	3AG	1/4"	—	Glass	—	—	1, 3	IP20	Black	7641K36	00000	00000	7641K49	0000	7641K35	0000	—	———	0




		800V AC—30 amp per Circuit

		1	2													18 to 6	22	90.7	—	13/32"	1 1/2"	Cartridge	—	—	1, 3	IP20	Gray	7641K932	00000	00000	———	0	7641K35	0000	—	———	0

Markers


Blank	Numbered for Horizontal Rails	Numbered for Vertical Rails

Label your terminal block connections so you can identify them at a glance.

							Each
	For No. of Circuits	For Terminal Block Wd., mm	Number Range	Markers per Card	Color		1-24	25-Up
Blank



		1, 2	8, 10, 12, 13, 16, 22	—	100	White	7641K981	00000	00000


		Numbered for Horizontal Rails



				1, 2	8, 10, 12, 13, 16, 22	1 to 100	100	White	7641K991	0000	0000


				1, 2	8, 10, 12, 13, 16, 22	101 to 200	100	White	7641K992	0000	0000


				Numbered for Vertical Rails



						1, 2	8, 10, 12, 13, 16, 22	1 to 100	100	White	7641K993	0000	0000


						1, 2	8, 10, 12, 13, 16, 22	101 to 200	100	White	7641K994	0000	0000

Disconnect Terminal Blocks with Screw-Clamp Terminals

Image of Product. Front orientation. Terminal Blocks. Modular DIN-Rail Mount Terminal Blocks, Disconnect Terminal Blocks with Screw-Clamp Terminals.

Test and troubleshoot circuits without removing any wire. Flip the tab by hand or with a screwdriver to open and close the circuit.

Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.

End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.

Adjacent Jumpers—Metal poles create an electrical connection between adjacent terminal blocks, so you can connect multiple components with a single wire. Blocks must be the same width for the jumpers to fit.

Terminal Blocks											Covers		End Stops		Adjacent Jumpers
									Each
No. of Circuits	No. of Terminals per Circuit	For Wire Ga.	Wd., mm	Ht., mm	Color	For DIN Rail Trade Size	Enclosure Rating		1-24	25-Up		Each		Each	Insulation		Each







			320V AC/320V DC—10 amp per Circuit

			1	2	12	5	44.5	Gray/Orange	1, 3	IP20	7641K869	00000	00000	7641K31	00000	7641K35	00000	Noninsulated	7641K767	00000




					400V AC—15 amp per Circuit

					1	2	22 to 10	8	47	Gray	1, 3	IP20	7641K88	0000	0000	7641K881	0000	7641K35	0000	Insulated	7641K873	0000




							400V AC—20 amp per Circuit

							1	2	22 to 10	6	44.5	Gray	1, 3	IP20	7641K87	0000	0000	7641K871	0000	7641K35	0000	Insulated	7641K883	0000

Markers

Label your terminal block connections so you can identify them at a glance.

							Each
	For No. of Circuits	For Terminal Block Wd., mm	Number Range	Markers per Card	Color		1-24	25-Up
Blank



		1, 2	5	—	100	White	7641K983	00000	00000


		1, 2	6	—	100	White	7641K19	0000	0000
		1, 2	8, 10, 12, 13, 16, 22	—	100	White	7641K981	0000	0000


		Numbered for Horizontal Rails



				1, 2	5	1 to 100	100	White	7641K95	0000	0000


				1, 2	5	101 to 200	100	White	7641K96	0000	0000
				1, 2	6	1 to 100	100	White	7641K75	0000	0000
				1, 2	6	101 to 200	100	White	7641K76	0000	0000
				1, 2	8, 10, 12, 13, 16, 22	1 to 100	100	White	7641K991	0000	0000
				1, 2	8, 10, 12, 13, 16, 22	101 to 200	100	White	7641K992	0000	0000


				Numbered for Vertical Rails



						1, 2	5	1 to 100	100	White	7641K97	0000	0000


						1, 2	5	101 to 200	100	White	7641K98	0000	0000
						1, 2	6	1 to 100	100	White	7641K77	0000	0000
						1, 2	6	101 to 200	100	White	7641K78	0000	0000
						1, 2	8, 10, 12, 13, 16, 22	1 to 100	100	White	7641K993	0000	0000
						1, 2	8, 10, 12, 13, 16, 22	101 to 200	100	White	7641K994	0000	0000

Disconnect Terminal Blocks with Test Sockets and Screw-Clamp Terminals

Image of Product. Front orientation. Terminal Blocks. Modular DIN-Rail Mount Terminal Blocks, Disconnect Terminal Blocks with Test Sockets and Screw-Clamp Terminals.

Plug voltage meters into the built-in sockets to confirm the voltage is right for your application. You can also test and troubleshoot circuits without removing any wire. Push, turn, and release the knob to break your connection. When the knob is released, stick a wire through the hole so you can't accidentally reconnect the circuit—similar to a lockout tag.

Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.

End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.

Terminal Blocks											Covers		End Stops		Adjacent Jumpers			Test Plugs
									Each
No. of Circuits	No. of Terminals per Circuit	For Wire Ga.	Wd., mm	Ht., mm	Color	For DIN Rail Trade Size	Enclosure Rating		1-24	25-Up		Each		Each	Insulation		Each		Each







			500V AC/500V DC—15 amp per Circuit

			1	2	22 to 8	8	55.5	Gray/Black	1, 3	IP10	7641K867	00000	00000	7641K766	00000	7641K35	00000	Insulated	7641K873	00000	7641K768	00000


			1	2	22 to 8	8	55.5	Gray/Red	1, 3	IP10	7641K868	0000	0000	7641K766	0000	7641K35	0000	Insulated	7641K873	0000	7641K768	0000
			1	2	22 to 8	8	55.5	Gray/Yellow	1, 3	IP10	7641K866	0000	0000	7641K766	0000	7641K35	0000	Insulated	7641K873	0000	7641K768	0000

Markers


Blank	Numbered for Horizontal Rails	Numbered for Vertical Rails

Label your terminal block connections so you can identify them at a glance.

							Each
	For No. of Circuits	For Terminal Block Wd., mm	Number Range	Markers per Card	Color		1-24	25-Up
Blank



		1, 2	8, 10, 12, 13, 16, 22	—	100	White	7641K981	00000	00000


		Numbered for Horizontal Rails



				1, 2	8, 10, 12, 13, 16, 22	1 to 100	100	White	7641K991	0000	0000


				1, 2	8, 10, 12, 13, 16, 22	101 to 200	100	White	7641K992	0000	0000


				Numbered for Vertical Rails



						1, 2	8, 10, 12, 13, 16, 22	1 to 100	100	White	7641K993	0000	0000


						1, 2	8, 10, 12, 13, 16, 22	101 to 200	100	White	7641K994	0000	0000

Thermocouple Terminal Blocks with Screw-Clamp Terminals

Image of Product. Front orientation. Terminal Blocks. Modular DIN-Rail Mount Terminal Blocks, Thermocouple Terminal Blocks with Screw-Clamp Terminals.

Run your thermocouple wire into these blocks so no signal is lost or destroyed. The metal in the terminals is compatible with multiple thermocouple wire types.

Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.

End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.

Terminal Blocks												Covers		End Stops
										Each
No. of Circuits	No. of Terminals per Circuit	For Wire Ga.	Wd., mm	Ht., mm	For Thermocouple Type	Color	For DIN Rail Trade Size	Enclosure Rating		1-24	25-Up		Each		Each







			500V AC/500V DC

			1	2	18 to 16	6	44.5	J, K, T	Gray	1, 3	IP20	7641K381	000000	000000	7641K31	00000	7641K35	00000

Markers


Blank	Numbered for Horizontal Rails	Numbered for Vertical Rails

Label your terminal block connections so you can identify them at a glance.

							Each
	For No. of Circuits	For Terminal Block Wd., mm	Number Range	Markers per Card	Color		1-24	25-Up
Blank



		1, 2	6	—	100	White	7641K19	00000	00000


		Numbered for Horizontal Rails



				1, 2	6	1 to 100	100	White	7641K75	0000	0000


				1, 2	6	101 to 200	100	White	7641K76	0000	0000


				Numbered for Vertical Rails



						1, 2	6	1 to 100	100	White	7641K77	0000	0000


						1, 2	6	101 to 200	100	White	7641K78	0000	0000

Space-Saving Modular DIN-Rail Mount Terminal Blocks

These handle the same voltage and power as our other modular blocks while taking up about half the vertical space. Snap them onto DIN 2 rail (also known as mini rail), which is lower in height than DIN 3 rail.

The screw-clamp or spring-clamp terminals flatten your wire so it stays put when vibrated or pulled. For an even stronger and more conductive connection, crimp a terminal or wire ferrule onto the end of the wire.

Mix and match blocks to get the exact number of circuits you need in a single setup. Add terminal blocks for fuses and grounding wire as needed. The blocks clip side by side onto DIN rail in control panels, creating tidy rows of circuits that you can identify and access on the spot.

Terminal Blocks with Screw-Clamp Terminals

Image of Product. Front orientation. Terminal Blocks. Space-Saving Modular DIN-Rail Mount Terminal Blocks, Terminal Blocks with Screw-Clamp Terminals.

A screw presses the clamp onto the wire for a secure hold.

Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.

End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.

Noninsulated—Terminal blocks with noninsulated jumpers lose their IP20 rating for touch protection because the jumpers introduce exposed metal to the circuit.

Terminal Blocks											Covers		End Stops		Bar Jumpers
									Each
No. of Circuits	No. of Terminals per Circuit	For Wire Ga.	Wd., mm	Ht., mm	For DIN Rail Trade Size	Enclosure Rating	Choose a Color		1-24	25-Up		Each		Each	Insulation		Each







			250V AC—20 amp per Circuit

			1	2	28 to 12	5	27.5	2	IP20	Gray	7641K61	00000	00000	7641K66	00000	7641K69	00000	Noninsulated	7641K56	000000




					500V AC—17.5 amp per Circuit

					1	2	24 to 16	4	28	2	IP20	Gray	7641K951	0000	0000	7641K953	0000	7641K69	0000	Noninsulated	7641K954	00000




							500V AC—30 amp per Circuit

							1	2	22 to 12	6	28	2	IP20	Blue, Gray	7641K62	0000	0000	7641K671	0000	7641K69	0000	Noninsulated	7641K57	00000

Markers

Label your terminal block connections so you can identify them at a glance.

							Each
	For No. of Circuits	For Terminal Block Wd., mm	Number Range	Markers per Card	Color		1-24	25-Up
Blank



		1	4	—	100	White	7641K955	00000	00000


		1	5	—	100	White	7641K811	0000	0000
		1	6	—	100	White	7641K812	0000	0000


		Numbered for Horizontal Rails



				1	4	1 to 100	100	White	7641K956	0000	0000


				1	5	1 to 100	100	White	7641K824	0000	0000
				1	5	101 to 200	100	White	7641K825	0000	0000
				1	6	1 to 100	100	White	7641K834	0000	0000
				1	6	101 to 200	100	White	7641K835	0000	0000


				Numbered for Vertical Rails



						1	4	1 to 100	100	White	7641K957	0000	0000


						1	4	101 to 200	100	White	7641K958	0000	0000
						1	5	1 to 100	100	White	7641K822	0000	0000
						1	5	101 to 200	100	White	7641K823	0000	0000
						1	6	1 to 100	100	White	7641K832	0000	0000
						1	6	101 to 200	100	White	7641K833	0000	0000

Terminal Blocks with Spring-Clamp Terminals

Image of Product. Front orientation. Terminal Blocks. Space-Saving Modular DIN-Rail Mount Terminal Blocks, Terminal Blocks with Spring-Clamp Terminals.

Instead of fussing with screws, flip the lever to clamp your wire into the terminal.

Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.

End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.

Terminal Blocks											Covers		End Stops		Bar Jumpers
									Each
No. of Circuits	No. of Terminals per Circuit	For Wire Ga.	Wd., mm	Ht., mm	Color	For DIN Rail Trade Size	Enclosure Rating		1-24	25-Up		Each		Each	Insulation		Each







			600V AC/600V DC—24 amp per Circuit

			1	2	26 to 12	5	33	Gray	2	IP20	7641K851	00000	00000	7641K86	00000	7641K69	00000	Insulated	7641K94	000000


			1	4	26 to 12	10	33	Gray	2	IP20	7641K959	0000	0000	7641K86	0000	7641K69	0000	Insulated	7641K94	00000

Markers


Blank	Numbered for Horizontal Rails	Numbered for Vertical Rails

Label your terminal block connections so you can identify them at a glance.

							Each
	For No. of Circuits	For Terminal Block Wd., mm	Number Range	Markers per Card	Color		1-24	25-Up
Blank



		1	5	—	100	White	7641K811	00000	00000


		1, 2	8, 10, 12, 13, 16, 22	—	100	White	7641K981	0000	0000


		Numbered for Horizontal Rails



				1	5	1 to 100	100	White	7641K824	0000	0000


				1	5	101 to 200	100	White	7641K825	0000	0000
				1, 2	8, 10, 12, 13, 16, 22	1 to 100	100	White	7641K991	0000	0000
				1, 2	8, 10, 12, 13, 16, 22	101 to 200	100	White	7641K992	0000	0000


				Numbered for Vertical Rails



						1	5	1 to 100	100	White	7641K822	0000	0000


						1	5	101 to 200	100	White	7641K823	0000	0000
						1, 2	8, 10, 12, 13, 16, 22	1 to 100	100	White	7641K993	0000	0000
						1, 2	8, 10, 12, 13, 16, 22	101 to 200	100	White	7641K994	0000	0000

Ground Terminal Blocks with Screw-Clamp Terminals

Image of Product. Front orientation. Terminal Blocks. Space-Saving Modular DIN-Rail Mount Terminal Blocks, Ground Terminal Blocks with Screw-Clamp Terminals.

Connect grounding wire to DIN rail so fault currents can safely flow to ground. These terminal blocks should only be used for grounding circuits.

A screw presses the clamp onto the wire for a secure hold.

Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.

End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.

Terminal Blocks											Covers		End Stops
									Each
No. of Circuits	No. of Terminals per Circuit	For Wire Ga.	Wd., mm	Ht., mm	Color	For DIN Rail Trade Size	Enclosure Rating		1-24	25-Up		Each		Each



	1	2	22 to 12	6	28	Green/Yellow	2	IP20	7641K63	00000	00000	7641K961	00000	7641K69	00000

Markers


Blank	Numbered for Horizontal Rails	Numbered for Vertical Rails

Label your terminal block connections so you can identify them at a glance.

							Each
	For No. of Circuits	For Terminal Block Wd., mm	Number Range	Markers per Card	Color		1-24	25-Up
Blank



		1	6	—	100	White	7641K812	00000	00000


		Numbered for Horizontal Rails



				1	6	1 to 100	100	White	7641K834	0000	0000


				1	6	101 to 200	100	White	7641K835	0000	0000


				Numbered for Vertical Rails



						1	6	1 to 100	100	White	7641K832	0000	0000


						1	6	101 to 200	100	White	7641K833	0000	0000

Fuse Terminal Blocks with Screw-Clamp Terminals

Image of Product. Front orientation. Terminal Blocks. Space-Saving Modular DIN-Rail Mount Terminal Blocks, Fuse Terminal Blocks with Screw-Clamp Terminals.

Install a fuse in the built-in fuse holder so excess current doesn't damage your equipment. If the current exceeds the limit, the fuse will blow and cut power to connected components.

A screw presses the clamp onto the wire for a secure hold.

Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.

End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.

Terminal Blocks														Covers		End Stops
					For Fuse							Each
No. of Circuits	No. of Terminals per Circuit	For Wire Ga.	Wd., mm	Ht., mm	Overall Dia., mm	Overall Lg., mm	Type	Color	For DIN Rail Trade Size	Enclosure Rating		1-24	25-Up		Each		Each







			630V AC—6.3 amp per Circuit

			1	2	18 to 12	8	59.5	5	20	Ceramic, Glass	Gray	2	IP20	7641K58	00000	00000	7641K37	00000	7641K69	00000

Markers


Blank	Numbered for Horizontal Rails	Numbered for Vertical Rails

Label your terminal block connections so you can identify them at a glance.

							Each
	For No. of Circuits	For Terminal Block Wd., mm	Number Range	Markers per Card	Color		1-24	25-Up
Blank



		1, 2	8, 10, 12, 13, 16, 22	—	100	White	7641K981	00000	00000


		Numbered for Horizontal Rails



				1, 2	8, 10, 12, 13, 16, 22	1 to 100	100	White	7641K991	0000	0000


				1, 2	8, 10, 12, 13, 16, 22	101 to 200	100	White	7641K992	0000	0000


				Numbered for Vertical Rails



						1, 2	8, 10, 12, 13, 16, 22	1 to 100	100	White	7641K993	0000	0000


						1, 2	8, 10, 12, 13, 16, 22	101 to 200	100	White	7641K994	0000	0000