A plastic cover on the barrel provides electrical insulation to prevent short-circuiting with nearby wire. Convenient for applications that require frequent connections, these terminals slide together and pull apart with ease.

The connection tab on these terminals is completely covered with insulation, leaving no metal exposed when mated.

The connection tab on these terminals is completely covered with insulation, leaving no metal exposed when mated. When heat is applied, the insulation shrinks, forming a seal to keep out water and contaminants. The enclosed solder also melts when heated, creating the most secure and electrically conductive connection we offer.

Easy to install, connect, and disconnect, yet difficult to shake loose. These terminals interlock with each other to make a secure connection.

Rated UL 94 V-0 for flame resistance, these terminals are made of flame-retardant, self-extinguishing material to reduce the risk of fire.

The connection tab on these terminals is completely covered with insulation, leaving no metal exposed when mated.

These terminals withstand temperatures up to 900° F.

A plastic cover on the barrel provides electrical insulation.

Mount these terminals on a threaded screw or stud for a more secure connection than spade and hook terminals.

Mount these elongated ring terminals on a range of threaded screw and stud sizes—their connection is more secure than spade or hook terminals.

With a heat-resistant PVDF cover on the barrel, these terminals are best for high-temperature applications where you want to prevent short-circuiting with nearby wire.

When heat is applied, the enclosed solder melts, creating the most secure, electrically conductive, and environmentally sealed connection we offer.

With a thicker ring and a plastic cover on the barrel, these terminals are more durable than standard ring terminals and insulated to prevent short circuiting with nearby wire.

A plastic cover on the barrel provides electrical insulation rated to 600 volts.

Connect wire to a screw or stud at a right angle to fit connections into tight spaces.

Loosen your mounting screw to install—the open end eliminates the need to completely remove it.

When heat is applied, the enclosed solder melts and the insulation shrinks, creating the most secure, electrically conductive, and environmentally sealed connection we offer.

Connect wire to a screw or stud at a right angle to fit connections into tight spaces.

Add strength and stability to stranded wire to protect it from damage and speed insertion into terminal blocks.

These solid pins make it easier to insert stranded wire into screw-clamp connections.

Also known as bullet terminals, these have a round tab that requires less space than the flat tab found on most quick-disconnect terminals.

A hybrid of ring and spade terminals, these install without removing the mounting screw, yet resist being pulled off.

Connect two female quick-disconnects.

Best for equipment requiring regular servicing, these blocks disconnect without having to remove any wiring thanks to their plug-and-socket design. Their recessed screws prevent shorts by reducing the risk you’ll connect two circuits with a screwdriver or other tool.

Mount blocks to a panel or the surface of a machine. Also known as barrier terminal strips.

The spring-clamp terminals on these blocks make wire installation faster than other types of terminals. These wire connections also stand up to vibration and temperature changes.

Save time when wiring connections in a junction box; these blocks come already installed in an enclosure.

Use with DIN 3 rail. Add as many circuits as you need with these terminal blocks and accessories.

Quickly troubleshoot or change wiring without any tools. These terminal blocks have a lever clamp that you flip up to insert wiring and flip down to lock it in place.

One of the connections on these terminal blocks is a socket instead of a traditional terminal, making it easy to swap out equipment or change your wiring even in small enclosures. Instead of having to attach wire inside the tight space of your enclosure, you can wire a connector wherever it’s easiest and then plug it into the socket.

Rated IP20, these blocks have recessed terminals to prevent accidental contact with live circuits.

Solder the pins on these blocks directly to your circuit board.

Stack multiple ring or spade terminals on the stud terminal; the current flows through the stacked terminals.

Protect connections against corrosion.These bars are tin-plated copper and have stainless steel terminals.

Use the included crimping tool to install a variety of terminals and butt splices.

Keep a variety of ferrule sizes on hand.

Compress the barrel twice for an extra-tight grip in high-vibration applications.

An offset tongue gives you extra space to insert wire.

Prevent accidental contact with other connections.

Tighten the screw with a ¼" hex key wrench for a more secure connection than Hammer-On Welding Lugs.

Thicker walls than standard battery terminal lugs make these more durable.

When heat is applied, the flux and solder mixture creates a metallic bond that is nearly twice as strong as crimping or compression connections.

Made of lead, these clamps resist corrosion to stand up to marine environments. Use a lug to attach your cable to the stud.

Connect these clamps to cable with a crimping tool or by soldering.

Insert your stripped cable into the compression nut and tighten; no crimping or heat is required.

Bring power into electronic devices while protecting them from harmful electromagnetic interference (EMI).

Change AC voltage to DC voltage and bring power to electronic devices while protecting them from harmful electromagnetic interference (EMI).

Switch your device on and off without needing a separate switch. These connectors work with industry standard cords often found on power supplies, appliances, and other electronic devices.

Distribute power from one electronic device to several others with these connectors. By housing multiple outlets in a single unit, they save space and time spent on installation.

Built to handle tough, repetitive-use applications, these are more durable than standard straight-blade connectors.

Create a streamlined appearance—the flat face lies flush with your wall plate.

Minimize the risk of electric shock and electrical fires with a single receptacle.

Internal shutters prevent the insertion of foreign objects and accidental contact with power.

Charge mobile devices without an adapter.

Protect computers and other sensitive equipment from electromagnetic interference (EMI). Also known as isolated ground receptacles.

When mated, connectors meet NEMA 6P, NEMA 12, and either IP67 or IP69K.

Also known as hospital-grade connectors, these have an extra-tight fit when mated to remain secure in high-vibration environments.

Stainless steel hardware and nickel-plated blades or slots protect connections from damage in corrosive environments.

Attach these general purpose receptacles to DIN rail to bring power closer to where you need it.

Also known as twist-lock devices, these connectors withstand tough, repetitive use, and are more durable than standard turn-lock connectors. They turn to lock together when mated to prevent accidental disconnection.

A quarter turn locks these connectors in an outlet to remain secure in high-vibration applications and prevent accidental disconnection. They are not compatible with NEMA configurations.

Stainless steel hardware and nickel-plated blades or slots protect connections from damage in corrosive environments. These connectors turn to lock together when mated to prevent accidental disconnection.

Meet international standards IEC 309-1 and 309-2.

Use connectors where ignitable gas and dust may be present, such as in refineries and silos. They also prevent an electrical arc when separating mated connectors so you can safetly connect and disconnect with the power on.

Each set includes one male plug and one female socket that withstands the high temperatures and high current found in welding applications.

Connect RTD wire leads to conduit or instrumentation.