Light Duty Hot-Blade Knife Set
Cut and sculpt foam to make signs, displays, and prototypes. These sets include a sculpting tool for carving out foam, a freehand router with bendable wire to make complex shapes, and a precision engraver for making intricate designs. You can also adjust the temperature for the specific type of foam you’re cutting.
Blade | Handle | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Includes | Lg. | Wd. | Thick. | Edge | Blades Replaceable | Overall Lg. | Material | Lg. | Dia. | For Max. Thick. | Voltage | Wattage | Cord Lg., ft. | Plug Type | Temperature, °F | Each | |
For Use On Foam | |||||||||||||||||
Stainless Steel Blade | |||||||||||||||||
| Hot-Blade Knife, Precision Engraver, Freehand Router with Five Hot Wires, Sculpting Tool with Six Hot Wires, Temperature Control Unit, Plastic Carrying Case | 3" | 0.04" | 0.04" | Straight | No | 7 1/2" | Plastic | 4 1/2" | 1 1/2" | 3" | 120V AC | 36 W | 6 | Two Prong | 120° to 800° | 0000000 | 0000000 |
Light Duty Hot-Blade Knives
Without the optional temperature-control unit, this knife heats up to 1000° F. The temperature-control unit allows you to adjust the temperature from 150° to 1000° F.
Blade | Handle | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Thick. | Edge | Blades Replaceable | Overall Lg. | Material | Lg. | Dia. | For Max. Thick. | Voltage | Wattage | Cord Lg., ft. | Plug Type | Max. Temp. °F | Each | |
For Use On Cork, Fabric, Plastic, Rubber | ||||||||||||||||
Copper Blade | ||||||||||||||||
| 5/8" | 3/8" | 0.063" | Straight | Yes | 10" | Wood | 4 3/4" | 1 1/4" | 5/8" | 120V AC | 60 W | 5 | Two Prong | 1000° | 0000000 | 000000 |
Blade | ||||
|---|---|---|---|---|
| Lg. | Wd. | Thick. | Each | |
For Use On Cork, Fabric, Plastic, Rubber | ||||
| 5/8" | 3/8" | 0.063" | 0000000 | 000000 |
Hot-Blade Knives
Make straight cuts with the included blade. To cut curves, angles, and other shapes, mount the optional sling onto the knife. It includes a blade that can be bent once into any shape.
Knives with an intermittent operating cycle shut off when they get too hot. Once cooled down, they can be used again.
Blade | Handle | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Operating Cycle | Lg. | Wd. | Thick. | Blades Replaceable | Included Blade Style | Overall Lg. | Material | Lg. | Wd. | Type | For Max. Thick. | Voltage | Wattage | Cord Lg., ft. | Temperature, °F | Each | |
For Use On Cork, Fabric, Plastic, Rubber | |||||||||||||||||
Steel Blade | |||||||||||||||||
| Intermittent | 2" | 1/2" | 0.024" | Yes | 1 | 9" | Steel | 8" | 2" | Curved | 5" | 120V AC | 150 W | 11 | 0° to 1000° | 0000000 | 0000000 |
| Continuous | 3" | 1" | 0.031" | Yes | 6 | 12" | Steel | 9" | 2" | Straight | 5" | 120V AC | 500 W | 6 | 220° to 1400° | 0000000 | 00000000 |
Blade | |||||
|---|---|---|---|---|---|
| Lg. | Wd. | Thick. | Each | ||
| 1 | 5/8" | 1/2" | 0.024" | 0000000 | 000000 |
| 1 | 2" | 1/2" | 0.024" | 0000000 | 00000 |
| 1 | 3 1/2" | 1/2" | 0.024" | 0000000 | 00000 |
| 1 | 5" | 1/2" | 0.024" | 0000000 | 00000 |
| 2 | 4" | 1/2" | 0.024" | 0000000 | 00000 |
| 2 | 7 7/8" | 1/2" | 0.024" | 0000000 | 00000 |
| 3 | 1 3/8" | 1" | 0.024" | 0000000 | 00000 |
| 4 | 1 3/8" | 1" | 0.024" | 0000000 | 00000 |
| 4 | 1 3/8" | 1" | 0.4" | 0000000 | 00000 |
| 5 | 1 3/4" | 1 1/4" | 0.031" | 0000000 | 00000 |
| 6 | 3" | 1" | 0.031" | 0000000 | 00000 |
| 7 | 1 3/8" | 1 1/2" | 0.024" | 0000000 | 00000 |
| 8 | 1/4" | 1 1/2" | 0.024" | 0000000 | 00000 |
| 8 | 1/2" | 1 3/8" | 0.031" | 0000000 | 00000 |
Bench-Top Hot-Blade Knives
The blade is corrosion-resitant stainless steel.
Blade | Overall | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Thick. | Edge | Blades Replaceable | Handle Material | Voltage | Wattage | Cord Lg., ft. | Plug Type | Max. Temp., °F | Ht. | Wd. | Dp. | Each | |
For Use On Cork, Fabric, Plastic, Rubber | |||||||||||||||
Stainless Steel Blade | |||||||||||||||
| 5" | 1" | 0.75" | Straight | Yes | Aluminum | 120V AC | 190 W | 6 | Three Prong | 1000° | 11 1/2" | 6" | 15 1/4" | 000000 | 0000000 |
Cable Saws for PVC Pipe
Melt through irrigation, plumbing, and electrical grade PVC pipe with heat friction. The cutting cable is flexible stainless steel without teeth. Use this saw in hard-to-reach areas.
Length | |||||||
|---|---|---|---|---|---|---|---|
| Overall | Cable | For Pipe Dia. | Material | Handle Material | Flexibility | Each | |
| 32" | 24" | Up to 8" | Stainless Steel | Rubber | Flexible | 00000000 | 00000 |
Friction-Cutting Band Saw Blades for Thin Metal and Rubber
Used in extremely fast saws, these blades move at speeds up to 15,000 sfpm. to generate enough heat to melt and cut through hard sheet metal and rubber. Their unique tooth shape increases heat by scooping in more air to burn up the material. By melting the material, this blade can cut through hard sheet metal and rubber, while other band saw blades vibrate and warp the material being cut. Made from carbon steel with added silicon, they withstand high temperatures and resist wear.
These blades are thin and flexible for making both complex curved cuts and long, straight cuts. Choose more teeth per inch for a smooth cut; choose fewer teeth per inch for fast, rough cutting. All have a welded seam and are ready to install on vertical band saws.
For technical drawings and 3-D models, click on a part number.
Material | ||||||||
|---|---|---|---|---|---|---|---|---|
| Lg. | Teeth per Inch | For Material Thick. | For Use On | Tooth Style | Body | Tooth | Each | |
1" Wd. × 0.035" Thick. | ||||||||
| 234" | 8 | 3/8"-5/8" | Steel, Rubber | Constant Set | Carbon Steel | Carbon Steel | 0000000 | 000000 |
| 234" | 10 | 5/16"-5/8" | Steel, Rubber | Constant Set | Carbon Steel | Carbon Steel | 0000000 | 00000 |
| 241" | 8 | 3/8"-5/8" | Steel, Rubber | Constant Set | Carbon Steel | Carbon Steel | 0000000 | 00000 |
| 241" | 10 | 5/16"-5/8" | Steel, Rubber | Constant Set | Carbon Steel | Carbon Steel | 0000000 | 00000 |
| 244" | 10 | 5/16"-5/8" | Steel, Rubber | Constant Set | Carbon Steel | Carbon Steel | 0000000 | 00000 |
| 246" | 10 | 5/16"-5/8" | Steel, Rubber | Constant Set | Carbon Steel | Carbon Steel | 0000000 | 00000 |
| 257" | 10 | 5/16"-5/8" | Steel, Rubber | Constant Set | Carbon Steel | Carbon Steel | 0000000 | 00000 |
| 263" | 10 | 5/16"-5/8" | Steel, Rubber | Constant Set | Carbon Steel | Carbon Steel | 0000000 | 00000 |
| 325" | 8 | 3/8"-5/8" | Steel, Rubber | Constant Set | Carbon Steel | Carbon Steel | 0000000 | 00000 |
| 327" | 10 | 5/16"-5/8" | Steel, Rubber | Constant Set | Carbon Steel | Carbon Steel | 0000000 | 00000 |
No-Fray Rope and Cord Cutters
A heated blade cuts material and fuses the ends to prevent fraying. It cuts through 1" rope in 10 seconds.
Cutters | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mounting Holes | Replacement Blades | |||||||||||||||
| Blade Lg. | Blade Material | Voltage | Cord Length, ft. | Plug Type | Specifications Met | Lg. | Wd. | Ht. | Max. Temperature | No. of | Dia. | Fasteners Included | Each | Each | ||
For Use On Nylon, Polyester, Polypropylene | ||||||||||||||||
| 2 5/16" | Steel | 120V AC | 6 1/2 | Three Prong | C-ETL Listed, ETL Listed | 6 1/4" | 4" | 5 3/4" | 1,200° F @ 30 sec. | 4 | 3/16" | No | 0000000 | 0000000 | 0000000 | 000000 |