Thread Sealants For Acetic Acid

Filter by

For Use With

Acetic Acid (White Vinegar)

Gasoline (Up to 10% Ethanol)

Methanol (Methyl Alcohol)

Methyl Ethyl Ketone (MEK)

Sodium Bicarbonate (Baking Soda)

Sodium Chloride

Sodium Hydroxide (Caustic Soda)

Sodium Hypochlorite (Bleach)

For Use On

Container Type

Applicator-Top Bottle

Color

Maximum Temperature

For Maximum Thread Diameter

Width

Maximum Pressure for Gases

Environment

Maximum Pressure for Fluids

Cure Type

Manufacturer

Mixing Required

Minimum Temperature

Container Size

For Use Outdoors

Locking Strength

Food Industry Standard

Thickness

Consistency

REACH

RoHS

Export Control Classification Number (ECCN)

EAR99

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

DFARS Specialty Metals

Certification

87 Products

Non-Hardening Thread Sealants with PTFE


Applicator-Top Can	Tube

PTFE provides a slippery surface that keeps threads from binding. These sealants never fully harden, remaining pliable enough to self-heal and stop leaks before they start, so they’re often used in high-vibration applications that could cause standard thread sealants to fail. Since they have low locking strength, these sealants can be adjusted without tools.

Gasoila—Gasoila sealants are designed specifically to resist gasoline and fuel oils, making them best for motors, nozzles, pump assemblies, and fuel lines.

Cannot Be Sold To—VOC regulations restrict sales of sealants that cannot be sold to the listed jurisdictions/areas.

		Container		Max. Pressure, psi		Temp., ° F
	Mfr. Model No.	Size, fl. oz.	Type	For Fluids	For Gases	Min.	Max.	For Max. Thread Dia.	Consistency	Certification	Color	Cannot Be Sold To		Each
Low Locking Strength







				Loctite®

				5113	16	Applicator-Top Can	Not Rated	Not Rated	-65	300	2"	Paste	—	White	Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA; Ventura County, CA	8149K22	000000




						Gasoila

						GE04	4	Applicator-Top Can	10,000	3,000	-100	600	2"	Paste	UL Classified	Green	—	5477K101	00000


						GE08	8	Applicator-Top Can	10,000	3,000	-100	600	2"	Paste	UL Classified	Green	—	5477K102	00000
						GE16	16	Applicator-Top Can	10,000	3,000	-100	600	2"	Paste	UL Classified	Green	—	5477K103	00000




								Other Thread Sealants

								—	2	Tube	10,000	3,000	-100	600	3"	Paste	CSA Certified CSA-US Certified UL Classified	Blue	—	5477K18	0000


								—	4	Applicator-Top Can	10,000	3,000	-100	600	3"	Paste	CSA Certified CSA-US Certified UL Classified	Blue	—	5477K19	0000
								—	8	Applicator-Top Can	10,000	3,000	-100	600	3"	Paste	CSA Certified CSA-US Certified UL Classified	Blue	—	5477K21	00000

High-Density Thread Sealant Tape

This tape has a higher density than standard tape for a better seal between threads. Made of PTFE, it has a slippery surface that keeps threads from binding to make parts easy to assemble.

				Max. Pressure, psi										Each
	Wd.	Lg., yd.	Density, g/cm³	For Fluids	For Gases	Temp. Range, ° F	For Max. Thread Dia.	Food Industry Std.	Specs. Met	Certification	Mil. Spec.	Color		1-11	12-Up
PTFE







				0.0032" Thick

				1/4"	14	1.2	10,000	10,000	-450 to 550	1/2"	—	Fed. Spec. A-A-58092 Type II	C-UL Listed Mil. Spec. UL Listed	MIL-T-27730	Gray	7346A11	00000	00000


				1/4"	14	1.2	10,000	10,000	-450 to 550	1/2"	FDA Compliant 21 CFR 177.1550	Fed. Spec. A-A-58092 Type II	C-UL Listed Mil. Spec. UL Listed	MIL-T-27730	White	6802K22	0000	0000
				3/8"	14	1.2	10,000	10,000	-450 to 550	3/4"	—	Fed. Spec. A-A-58092 Type II	C-UL Listed Mil. Spec. UL Listed	MIL-T-27730	Gray	7346A16	0000	0000
				3/8"	14	1.2	10,000	10,000	-450 to 550	3/4"	FDA Compliant 21 CFR 177.1550	Fed. Spec. A-A-58092 Type II	C-UL Listed Mil. Spec. UL Listed	MIL-T-27730	White	6802K19	0000	0000
				1/2"	14	1.2	10,000	10,000	-450 to 550	1"	—	Fed. Spec. A-A-58092 Type II	C-UL Listed Mil. Spec. UL Listed	MIL-T-27730	Gray	7346A12	0000	0000
				1/2"	14	1.2	10,000	10,000	-450 to 550	1"	FDA Compliant 21 CFR 177.1550	Fed. Spec. A-A-58092 Type II	C-UL Listed Mil. Spec. UL Listed	MIL-T-27730	White	6802K33	0000	0000
				3/4"	14	1.2	10,000	10,000	-450 to 550	1 1/2"	—	Fed. Spec. A-A-58092 Type II	C-UL Listed Mil. Spec. UL Listed	MIL-T-27730	Gray	7346A13	0000	0000
				3/4"	14	1.2	10,000	10,000	-450 to 550	1 1/2"	FDA Compliant 21 CFR 177.1550	Fed. Spec. A-A-58092 Type II	C-UL Listed Mil. Spec. UL Listed	MIL-T-27730	White	6802K44	0000	0000
				1"	14	1.2	10,000	10,000	-450 to 550	2"	—	Fed. Spec. A-A-58092 Type II	C-UL Listed Mil. Spec. UL Listed	MIL-T-27730	Gray	7346A14	0000	0000
				1"	14	1.2	10,000	10,000	-450 to 550	2"	FDA Compliant 21 CFR 177.1550	Fed. Spec. A-A-58092 Type II	C-UL Listed Mil. Spec. UL Listed	MIL-T-27730	White	6802K55	00000	0000
				1 1/2"	14	1.2	10,000	10,000	-450 to 550	3"	—	Fed. Spec. A-A-58092 Type II	C-UL Listed Mil. Spec. UL Listed	MIL-T-27730	Gray	7346A15	00000	00000


				1 1/2"	14	1.2	10,000	10,000	-450 to 550	3"	FDA Compliant 21 CFR 177.1550	Fed. Spec. A-A-58092 Type II	C-UL Listed Mil. Spec. UL Listed	MIL-T-27730	White	6802K66	00000	00000
				2"	14	1.2	10,000	10,000	-450 to 550	4"	FDA Compliant 21 CFR 177.1550	Fed. Spec. A-A-58092 Type II	C-UL Listed Mil. Spec. UL Listed	MIL-T-27730	White	6802K77	00000	00000




						0.0035" Thick

						1/4"	14	1.9	10,000	10,800	-450 to 550	6"	FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600	Fed. Spec. A-A-58092 Type II	Mil. Spec. UL Listed	MIL-T-27730	White	6802K81	00000	0000


						3/8"	14	1.9	10,000	10,800	-450 to 550	6"	FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600	Fed. Spec. A-A-58092 Type II	Mil. Spec. UL Listed	MIL-T-27730	White	6802K82	00000	00000
						1/2"	14	1.9	10,000	10,800	-450 to 550	6"	FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600	Fed. Spec. A-A-58092 Type II	Mil. Spec. UL Listed	MIL-T-27730	White	6802K83	00000	00000
						3/4"	14	1.9	10,000	10,800	-450 to 550	6"	FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600	Fed. Spec. A-A-58092 Type II	Mil. Spec. UL Listed	MIL-T-27730	White	6802K84	00000	00000
						1"	14	1.9	10,000	10,800	-450 to 550	6"	FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600	Fed. Spec. A-A-58092 Type II	Mil. Spec. UL Listed	MIL-T-27730	White	6802K85	00000	00000
						1 1/2"	14	1.9	10,000	10,800	-450 to 550	6"	FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600	Fed. Spec. A-A-58092 Type II	Mil. Spec. UL Listed	MIL-T-27730	White	6802K86	00000	00000
						2"	14	1.9	10,000	10,800	-450 to 550	6"	FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600	Fed. Spec. A-A-58092 Type II	Mil. Spec. UL Listed	MIL-T-27730	White	6802K87	00000	00000


						Nickel-Filled PTFE







										0.0035" Thick

										1/4"	14	1.4	10,000	10,000	-450 to 550	1/2"	—	—	C-UL Listed UL Listed	—	Gray	7346A211	00000	00000


										3/8"	14	1.4	10,000	10,000	-450 to 550	3/4"	—	—	C-UL Listed UL Listed	—	Gray	7346A212	00000	00000
										1/2"	14	1.4	10,000	10,000	-450 to 550	1"	—	—	C-UL Listed UL Listed	—	Gray	7346A213	00000	00000
										3/4"	14	1.4	10,000	10,000	-450 to 550	1 1/2"	—	—	C-UL Listed UL Listed	—	Gray	7346A214	00000	00000
										1"	14	1.4	10,000	10,000	-450 to 550	2"	—	—	C-UL Listed UL Listed	—	Gray	7346A215	00000	00000




0.0040" Thick

1/4"	14											1.9	10,500	11,500	-450 to 550	6"	FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600	—	UL Listed	—	White	6802K88	00000	00000


3/8"	14											1.9	10,500	11,500	-450 to 550	6"	FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600	—	UL Listed	—	White	6802K89	00000	00000
1/2"	14	1.9										10,500	11,500	-450 to 550	6"	FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600	—	UL Listed	—	White	6802K91	00000	00000
3/4"	14	1.9	10,500									11,500	-450 to 550	6"	FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600	—	UL Listed	—	White	6802K92	00000	00000
1"	14	1.9	10,500									11,500	-450 to 550	6"	FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600	—	UL Listed	—	White	6802K93	00000	00000
2"	14	1.9	10,500									11,500	-450 to 550	6"	FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600	—	UL Listed	—	White	6802K95	00000	00000

Non-Hardening High-Temperature Thread Sealants


Applicator-Top Can	Can	Tube

Often used in high-vibration applications that could cause standard thread sealants to fail, these never fully harden and remain pliable enough to self-heal and stop leaks before they start. They have low locking strength, so they can be adjusted without tools.

	Container			Max. Pressure, psi		Temp., ° F
	Size, fl. oz.	Net Wt., lb.	Type	For Fluids	For Gases	Min.	Max.	For Max. Thread Dia.	Consistency	Color		Each
Low Locking Strength







				Key Graphite

				—	0.625	Applicator-Top Can	15,000	15,000	-30	750	4"	Paste	Black	4586K8	000000


				—	1	Can	15,000	15,000	-30	750	4"	Paste	Black	4586K5	00000
				—	2.75	Can	15,000	15,000	-30	750	4"	Paste	Black	4586K6	000000
				—	10	Can	15,000	15,000	-30	750	4"	Paste	Black	4586K7	000000




						Other Thread Sealants

						4.4	—	Tube	2,300	2,300	Not Rated	1,100	2"	Paste	Black	1965K1	00000

Thread Sealants for Oxygen Systems

Jar

Completely free of oil and chemically inert, these sealants are safe to use with wet and dry oxygen systems. They contain PTFE, which provides a slippery surface that keeps threads from binding. These sealants are non-hardening, remaining pliable enough to self-heal and stop leaks before they start, so they’re often used in high-vibration applications that could cause standard thread sealants to fail. Since they have low locking strength, these sealants can be adjusted without tools.

	Container		Max. Pressure, psi		Temp., ° F
	Size, fl. oz.	Type	For Fluids	For Gases	Min.	Max.	Max. Temp. for Oxygen, ° F	For Max. Thread Dia.	Consistency	Certification	Mil. Spec.	Color		Each
Low Locking Strength



		3.5	Jar	10,000	10,000	-450	550	140	6"	Paste	Mil. Spec.	MIL-PRF-27617	Green	4538K6	0000000

Reusable Non-Hardening Thread Sealants for Coarse Threads

Much thicker than sealants for fine threads, these sealants bridge the gaps between coarse threads. Threads coated with these sealants can be installed multiple times without recoating. They have low locking strength, so they prevent threads from loosening due to vibration and can be adjusted without tools. They meet NSF/ANSI 61 for use with drinking water.

	Container		Max. Pressure, psi		Temp., ° F
	Size, fl. oz.	Type	For Fluids	For Gases	Min.	Max.	For Max. Thread Dia.	Consistency	Food Industry Std.	Choose a Color		Each
Low Locking Strength



		2	Applicator-Top Bottle	10,000	300	-65	300	4"	Thick Liquid	NSF/ANSI 61	White, Orange	4592K2	000000

Reusable Non-Hardening Thread Sealants for Fine Threads

Formulated to flow into small spaces, use these sealants between fine threads. Threads coated with these sealants can be installed multiple times without recoating. They have low locking strength, so they prevent threads from loosening due to vibration and can be adjusted without tools. They meet NSF/ANSI 61 for use with drinking water.

	Container		Max. Pressure, psi		Temp., ° F
	Size, fl. oz.	Type	For Fluids	For Gases	Min.	Max.	For Max. Thread Dia.	Consistency	Food Industry Std.	Choose a Color		Each
Low Locking Strength



		2	Applicator-Top Bottle	10,000	300	-65	300	4"	Thick Liquid	NSF/ANSI 61	White, Orange	4592K3	000000

Thread Sealant Tape

Made of PTFE, this tape has a slippery surface that keeps threads from binding to make parts easy to assemble.

ePTFE with Graphite—ePTFE tape with graphite creates a better seal between threads than plain PTFE tape, which helps prevent fluid and gas leaks. The graphite attaches to the PTFE, so this tape does not emit harmful VOCs.

				Max. Pressure, psi
	Wd.	Lg., yd.	Density, g/cm³	For Fluids	For Gases	Temp. Range, ° F	For Max. Thread Dia.	Food Industry Std.	Certification	Mil. Spec.	Color		Each
PTFE







				0.0025" Thick

				1/4"	16	0.55	10,000	10,000	-450 to 550	1/2"	FDA Compliant 21 CFR 177.1550	UL Listed	—	White	4591K11	00000


				3/8"	16	0.55	10,000	10,000	-450 to 550	1"	FDA Compliant 21 CFR 177.1550	UL Listed	—	White	4591K18	0000
				1/2"	16	0.55	10,000	10,000	-450 to 550	1"	FDA Compliant 21 CFR 177.1550	UL Listed	—	White	4591K12	0000
				3/4"	16	0.55	10,000	10,000	-450 to 550	1 1/2"	FDA Compliant 21 CFR 177.1550	UL Listed	—	White	4591K13	0000
				1"	16	0.55	10,000	10,000	-450 to 550	1 1/2"	FDA Compliant 21 CFR 177.1550	UL Listed	—	White	4591K14	0000




						0.0032" Thick

						1/4"	14	0.7	10,000	10,000	-450 to 550	1/2"	FDA Compliant 21 CFR 177.1550	Mil. Spec. UL Listed	MIL-T-27730	White	6802K11	0000


						3/8"	14	0.7	10,000	10,000	-450 to 550	3/4"	FDA Compliant 21 CFR 177.1550	Mil. Spec. UL Listed	MIL-T-27730	White	6802K18	0000
						1/2"	14	0.7	10,000	10,000	-450 to 550	1"	FDA Compliant 21 CFR 177.1550	Mil. Spec. UL Listed	MIL-T-27730	White	6802K12	0000
						3/4"	14	0.7	10,000	10,000	-450 to 550	1 1/2"	FDA Compliant 21 CFR 177.1550	Mil. Spec. UL Listed	MIL-T-27730	White	6802K13	0000
						1"	14	0.7	10,000	10,000	-450 to 550	2"	FDA Compliant 21 CFR 177.1550	Mil. Spec. UL Listed	MIL-T-27730	White	6802K14	0000
						1 1/2"	14	0.7	10,000	10,000	-450 to 550	3"	FDA Compliant 21 CFR 177.1550	Mil. Spec. UL Listed	MIL-T-27730	White	6802K15	0000
						2"	14	0.7	10,000	10,000	-450 to 550	4"	FDA Compliant 21 CFR 177.1550	Mil. Spec. UL Listed	MIL-T-27730	White	6802K16	00000




								0.0035" Thick

								1/2"	39	0.8	10,000	10,000	-450 to 500	2"	—	C-UL Listed UL Listed	—	Blue	4934A15	0000


								3/4"	39	0.8	10,000	10,000	-450 to 500	2"	—	C-UL Listed UL Listed	—	Blue	4934A16	0000
								1"	39	0.8	10,000	10,000	-450 to 500	2"	—	C-UL Listed UL Listed	—	Blue	4934A17	00000
								2"	39	0.8	10,000	10,000	-450 to 500	2"	—	C-UL Listed UL Listed	—	Blue	4934A18	00000


								ePTFE with Graphite







												0.0020" Thick

												5/8"	27	0.8	2,900	2,900	-400 to 500	1 1/4"	—	—	—	Gray	6802K25	00000

Thread Sealant Tape for Stainless Steel Threads

This tape is thicker to prevent seizing and galling associated with stainless steel threaded connections. It’s also good for use with other metals. This tape has a higher density than standard tape for a better seal between threads. Made of PTFE, it has a slippery surface that keeps threads from binding to make parts easy to assemble.

				Max. Pressure, psi								Each
	Wd.	Lg., ft.	Density, g/cm³	For Fluids	For Gases	Temp. Range, ° F	For Max. Thread Dia.	Certification	Mil. Spec.	Color		1-11	12-Up
PTFE







				0.0043" Thick

				1/4"	43	1.05	10,000	10,000	-450 to 550	1 1/2"	Mil. Spec. UL Listed	MIL-T-27730	Gray	1726N11	00000	00000


				3/8"	43	1.05	10,000	10,000	-450 to 550	1 1/2"	Mil. Spec. UL Listed	MIL-T-27730	Gray	1726N12	0000	0000
				1/2"	21	1.05	10,000	10,000	-450 to 550	1 1/2"	Mil. Spec. UL Listed	MIL-T-27730	Gray	1726N17	0000	0000
				1/2"	50	1.05	10,000	10,000	-450 to 550	1 1/2"	Mil. Spec. UL Listed	MIL-T-27730	Gray	1726N13	00000	00000
				3/4"	21	1.05	10,000	10,000	-450 to 550	1 1/2"	Mil. Spec. UL Listed	MIL-T-27730	Gray	1726N14	0000	0000
				1"	21	1.05	10,000	10,000	-450 to 550	1 1/2"	Mil. Spec. UL Listed	MIL-T-27730	Gray	1726N18	0000	0000
				1"	43	1.05	10,000	10,000	-450 to 550	1 1/2"	Mil. Spec. UL Listed	MIL-T-27730	Gray	1726N15	00000	00000
				1 1/2"	43	1.05	10,000	10,000	-450 to 550	1 1/2"	Mil. Spec. UL Listed	MIL-T-27730	Gray	1726N16	00000	00000

Thread Sealants with PTFE

Tube

PTFE provides a slippery surface that keeps threads from binding. These sealants are anaerobic, so they don’t begin to harden until coated surfaces are threaded together, blocking exposure to air.

Low Locking Strength—Sealants with low locking strength prevent threads from loosening due to vibration and can be adjusted without tools.

	Container				Max. Pressure, psi		Temp., ° F
	Size, fl. oz.	Type	Begins to Harden, hr.	Reaches Full Strength, hr.	For Fluids	For Gases	Min.	Max.	For Max. Thread Dia.	Consistency	Certification	Color		Each
Low Locking Strength



		1.7	Tube	2	24	10,000	10,000	-55	375	3"	Paste	UL Listed	Off-White	45855K88	000000


		8.4	Tube	2	24	10,000	10,000	-55	375	3"	Paste	UL Listed	Off-White	45855K89	00000

Choose-a-Color High-Density Thread Sealant Tape

Use color to identify water, gas, and chemical connections. This tape has a higher density than standard tape for a better seal between threads. Made of PTFE, it has a slippery surface that keeps threads from binding to make parts easy to assemble.

Green—Green tape is often used for oxygen.

Orange and Yellow—Orange and yellow tape is commonly used to indicate fuel and gas.

Red—Red tape is often used for water.

				Max. Pressure, psi									Each
	Wd.	Lg., yd.	Density, g/cm³	For Fluids	For Gases	Temp. Range, ° F	For Max. Thread Dia.	Specs. Met	Certification	Mil. Spec.	Choose a Color		1-11	12-Up
PTFE







				0.0032" Thick

				1/4"	14	1.2	10,000	10,000	-450 to 550	1/2"	Fed. Spec. A-A-58092 Type II	Mil. Spec. UL Listed	MIL-T-27730	Green, Orange, Red, Yellow	44945K11	00000	00000


				3/8"	14	1.2	10,000	10,000	-450 to 550	3/4"	Fed. Spec. A-A-58092 Type II	Mil. Spec. UL Listed	MIL-T-27730	Green, Orange, Red, Yellow	44945K17	0000	0000
				1/2"	14	1.2	10,000	10,000	-450 to 550	1"	Fed. Spec. A-A-58092 Type II	Mil. Spec. UL Listed	MIL-T-27730	Green, Orange, Red, Yellow	44945K12	0000	0000
				3/4"	14	1.2	10,000	10,000	-450 to 550	1 1/2"	Fed. Spec. A-A-58092 Type II	Mil. Spec. UL Listed	MIL-T-27730	Green, Orange, Red, Yellow	44945K13	0000	0000
				1"	14	1.2	10,000	10,000	-450 to 550	2"	Fed. Spec. A-A-58092 Type II	Mil. Spec. UL Listed	MIL-T-27730	Green, Orange, Red, Yellow	44945K14	00000	0000
				1 1/2"	14	1.2	10,000	10,000	-450 to 550	3"	Fed. Spec. A-A-58092 Type II	Mil. Spec. UL Listed	MIL-T-27730	Green, Orange, Red, Yellow	44945K15	00000	00000
				2"	14	1.2	10,000	10,000	-450 to 550	4"	Fed. Spec. A-A-58092 Type II	Mil. Spec. UL Listed	MIL-T-27730	Green, Orange, Red, Yellow	44945K16	00000	00000

High-Temperature Thread Sealants

These sealants have high locking strength, so they work in demanding applications, such as securing mounting studs in motor housings. They also withstand applications with large temperature swings.

Room Temperature—Room-temperature cure sealants must be mixed with water for use; they harden as the water evaporates. Mix about five parts powdered-sealant to one part water to form a thick consistency similar to peanut butter. Hardening can be accelerated with heat; do not heat to above 200° F. They require a hand tool to unthread.

1,000° F Maximum Temperature—1000° F max. temp. sealants expand as they harden.

1,500° F Maximum Temperature—1500° F max. temp. sealants are for use on cement-lined pipe joints prior to welding. The heat from the welding torch helps them begin to harden.

	Container					Max. Pressure, psi		Temp., ° F
	Size, fl. oz.	Type	Begins to Harden, min.	Reaches Full Strength, hr.	Mix Ratio	For Fluids	For Gases	Min.	Max.	For Max. Thread Dia.	Consistency	Food Industry Std.	For Use On	Color		Each
High Locking Strength







				Room Temperature Cure X-Pando

				14	Can	60	24	5:1	5,000	5,000	-300	1,000	6"	Powder	NSF/ANSI 61	Aluminum, Brass, Bronze, Cast Iron, Copper, Stainless Steel, Steel	Gray	6818K11	000000


				14	Can	60	24	5:1	5,000	5,000	-300	1,500	6"	Powder	NSF/ANSI 61	Aluminum, Steel	Gray	6818K24	00000
				70	Can	60	24	5:1	5,000	5,000	-300	1,000	6"	Powder	NSF/ANSI 61	Aluminum, Brass, Bronze, Cast Iron, Copper, Stainless Steel, Steel	Gray	6818K12	00000
				70	Can	60	24	5:1	5,000	5,000	-300	1,500	6"	Powder	NSF/ANSI 61	Aluminum, Steel	Gray	6818K26	00000

Drip-Free Non-Hardening Thread Sealants with PTFE

Apply these thread sealant sticks without a mess. They contain PTFE, which provides a slippery surface that keeps threads from binding. These sealants never fully harden, remaining pliable enough to self-heal and stop leaks before they start, so they’re often used in high-vibration applications that could cause standard thread sealants to fail. Since they have low locking strength, these sealants can be adjusted without tools. They meet NSF/ANSI 61 for use with drinking water.

	Container		Max. Pressure, psi
	Net Wt., oz.	Type	For Fluids	For Gases	Temp. Range, ° F	For Max. Thread Dia.	Consistency	Food Industry Std.	Environment	Color		Each
Low Locking Strength







				Slic-Tite

				1.2	Stick	5,000	500	-50 to 350	2"	Semi-Solid	NSF/ANSI 61	Food and Beverage, Outdoor	White	5477K11	000000

Thread Sealant Tape for Copper, Brass, and Bronze Threads

With 10% copper flake content, this tape matches the color of copper, brass, and bronze threads for a seamless finish. It’s made of PTFE, so it has a slippery surface to keep threads from binding. This tape has a higher density than standard tape for a better seal between threads.

				Max. Pressure, psi
	Wd.	Lg., ft.	Density, g/cm³	For Fluids	For Gases	Temp. Range, ° F	For Max. Thread Dia.	Certification	Mil. Spec.	Color		Each
Copper-Filled PTFE







				0.0045" Thick

				1/2"	50	1.6	10,000	300	-450 to 500	1 1/2"	Mil. Spec.	MIL-T-27730	Copper	4840N11	000000


				3/4"	50	1.6	10,000	300	-450 to 500	4"	Mil. Spec.	MIL-T-27730	Copper	4840N12	00000