Filter by
For Use With
For Use On
Container Type
Maximum Pressure for Gases
Maximum Temperature
Environment
Maximum Pressure for Fluids
Food Industry Standard
Military Specification
Maximum Pressure
Cure Type
Export Control Classification Number (ECCN)
DFARS Specialty Metals
Consistency
For Use Outdoors
High-Density Thread Sealant Tape
 |
This tape has a higher density than standard tape for a better seal between threads. Made of PTFE, it has a slippery surface that keeps threads from binding to make parts easy to assemble.
Max. Pressure, psi | Each | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. | Lg., yd. | Density, g/cm³ | For Fluids | For Gases | Temp. Range, ° F | For Max. Thread Dia. | Food Industry Std. | Certification | Mil. Spec. | Color | 1-11 | 12-Up | |||
PTFE | |||||||||||||||
0.0032" Thick | |||||||||||||||
| 1/4" | 14 | 1.2 | 10,000 | 10,000 | -450 to 550 | 1/2" | — | C-UL Listed Mil. Spec. UL Listed | Fed. Spec. A-A-58092 Type II MIL-T-27730 | Gray | 7346A11 | 00000 | 00000 | ||
| 1/4" | 14 | 1.2 | 10,000 | 10,000 | -450 to 550 | 1/2" | FDA Compliant 21 CFR 177.1550 | C-UL Listed Mil. Spec. UL Listed | Fed. Spec. A-A-58092 Type II MIL-T-27730 | White | 6802K22 | 0000 | 0000 | ||
| 3/8" | 14 | 1.2 | 10,000 | 10,000 | -450 to 550 | 3/4" | — | C-UL Listed Mil. Spec. UL Listed | Fed. Spec. A-A-58092 Type II MIL-T-27730 | Gray | 7346A16 | 0000 | 0000 | ||
| 3/8" | 14 | 1.2 | 10,000 | 10,000 | -450 to 550 | 3/4" | FDA Compliant 21 CFR 177.1550 | C-UL Listed Mil. Spec. UL Listed | Fed. Spec. A-A-58092 Type II MIL-T-27730 | White | 6802K19 | 0000 | 0000 | ||
| 1/2" | 14 | 1.2 | 10,000 | 10,000 | -450 to 550 | 1" | — | C-UL Listed Mil. Spec. UL Listed | Fed. Spec. A-A-58092 Type II MIL-T-27730 | Gray | 7346A12 | 0000 | 0000 | ||
| 1/2" | 14 | 1.2 | 10,000 | 10,000 | -450 to 550 | 1" | FDA Compliant 21 CFR 177.1550 | C-UL Listed Mil. Spec. UL Listed | Fed. Spec. A-A-58092 Type II MIL-T-27730 | White | 6802K33 | 0000 | 0000 | ||
| 3/4" | 14 | 1.2 | 10,000 | 10,000 | -450 to 550 | 1 1/2" | — | C-UL Listed Mil. Spec. UL Listed | Fed. Spec. A-A-58092 Type II MIL-T-27730 | Gray | 7346A13 | 0000 | 0000 | ||
| 3/4" | 14 | 1.2 | 10,000 | 10,000 | -450 to 550 | 1 1/2" | FDA Compliant 21 CFR 177.1550 | C-UL Listed Mil. Spec. UL Listed | Fed. Spec. A-A-58092 Type II MIL-T-27730 | White | 6802K44 | 0000 | 0000 | ||
| 1" | 14 | 1.2 | 10,000 | 10,000 | -450 to 550 | 2" | — | C-UL Listed Mil. Spec. UL Listed | Fed. Spec. A-A-58092 Type II MIL-T-27730 | Gray | 7346A14 | 0000 | 0000 | ||
| 1" | 14 | 1.2 | 10,000 | 10,000 | -450 to 550 | 2" | FDA Compliant 21 CFR 177.1550 | C-UL Listed Mil. Spec. UL Listed | Fed. Spec. A-A-58092 Type II MIL-T-27730 | White | 6802K55 | 00000 | 0000 | ||
| 1 1/2" | 14 | 1.2 | 10,000 | 10,000 | -450 to 550 | 3" | — | C-UL Listed Mil. Spec. UL Listed | Fed. Spec. A-A-58092 Type II MIL-T-27730 | Gray | 7346A15 | 00000 | 00000 | ||
| 1 1/2" | 14 | 1.2 | 10,000 | 10,000 | -450 to 550 | 3" | FDA Compliant 21 CFR 177.1550 | C-UL Listed Mil. Spec. UL Listed | Fed. Spec. A-A-58092 Type II MIL-T-27730 | White | 6802K66 | 00000 | 00000 | ||
| 2" | 14 | 1.2 | 10,000 | 10,000 | -450 to 550 | 4" | FDA Compliant 21 CFR 177.1550 | C-UL Listed Mil. Spec. UL Listed | Fed. Spec. A-A-58092 Type II MIL-T-27730 | White | 6802K77 | 00000 | 00000 | ||
0.0035" Thick | |||||||||||||||
| 1/4" | 14 | 1.9 | 10,000 | 10,800 | -450 to 550 | 6" | FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600 | Mil. Spec. UL Listed | Fed. Spec. A-A-58092 Type II MIL-T-27730 | White | 6802K81 | 00000 | 0000 | ||
| 3/8" | 14 | 1.9 | 10,000 | 10,800 | -450 to 550 | 6" | FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600 | Mil. Spec. UL Listed | Fed. Spec. A-A-58092 Type II MIL-T-27730 | White | 6802K82 | 00000 | 00000 | ||
| 1/2" | 14 | 1.9 | 10,000 | 10,800 | -450 to 550 | 6" | FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600 | Mil. Spec. UL Listed | Fed. Spec. A-A-58092 Type II MIL-T-27730 | White | 6802K83 | 00000 | 00000 | ||
| 3/4" | 14 | 1.9 | 10,000 | 10,800 | -450 to 550 | 6" | FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600 | Mil. Spec. UL Listed | Fed. Spec. A-A-58092 Type II MIL-T-27730 | White | 6802K84 | 00000 | 00000 | ||
| 1" | 14 | 1.9 | 10,000 | 10,800 | -450 to 550 | 6" | FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600 | Mil. Spec. UL Listed | Fed. Spec. A-A-58092 Type II MIL-T-27730 | White | 6802K85 | 00000 | 00000 | ||
| 1 1/2" | 14 | 1.9 | 10,000 | 10,800 | -450 to 550 | 6" | FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600 | Mil. Spec. UL Listed | Fed. Spec. A-A-58092 Type II MIL-T-27730 | White | 6802K86 | 00000 | 00000 | ||
| 2" | 14 | 1.9 | 10,000 | 10,800 | -450 to 550 | 6" | FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600 | Mil. Spec. UL Listed | Fed. Spec. A-A-58092 Type II MIL-T-27730 | White | 6802K87 | 00000 | 00000 | ||
Nickel-Filled PTFE | |||||||||||||||
0.0035" Thick | |||||||||||||||
| 1/4" | 14 | 1.4 | 10,000 | 10,000 | -450 to 550 | 1/2" | — | C-UL Listed UL Listed | — | Gray | 7346A211 | 00000 | 00000 | ||
| 3/8" | 14 | 1.4 | 10,000 | 10,000 | -450 to 550 | 3/4" | — | C-UL Listed UL Listed | — | Gray | 7346A212 | 00000 | 00000 | ||
| 1/2" | 14 | 1.4 | 10,000 | 10,000 | -450 to 550 | 1" | — | C-UL Listed UL Listed | — | Gray | 7346A213 | 00000 | 00000 | ||
| 3/4" | 14 | 1.4 | 10,000 | 10,000 | -450 to 550 | 1 1/2" | — | C-UL Listed UL Listed | — | Gray | 7346A214 | 00000 | 00000 | ||
| 1" | 14 | 1.4 | 10,000 | 10,000 | -450 to 550 | 2" | — | C-UL Listed UL Listed | — | Gray | 7346A215 | 00000 | 00000 | ||
0.0040" Thick | |||||||||||||||
| 1/4" | 14 | 1.9 | 10,500 | 11,500 | -450 to 550 | 6" | FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600 | UL Listed | — | White | 6802K88 | 00000 | 00000 | ||
| 3/8" | 14 | 1.9 | 10,500 | 11,500 | -450 to 550 | 6" | FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600 | UL Listed | — | White | 6802K89 | 00000 | 00000 | ||
| 1/2" | 14 | 1.9 | 10,500 | 11,500 | -450 to 550 | 6" | FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600 | UL Listed | — | White | 6802K91 | 00000 | 00000 | ||
| 3/4" | 14 | 1.9 | 10,500 | 11,500 | -450 to 550 | 6" | FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600 | UL Listed | — | White | 6802K92 | 00000 | 00000 | ||
| 1" | 14 | 1.9 | 10,500 | 11,500 | -450 to 550 | 6" | FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600 | UL Listed | — | White | 6802K93 | 00000 | 00000 | ||
| 2" | 14 | 1.9 | 10,500 | 11,500 | -450 to 550 | 6" | FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600 | UL Listed | — | White | 6802K95 | 00000 | 00000 | ||
Thread Sealants for Hydraulic and Compressed Air Systems
 |  |
Tube | Bottle |
Formulated for high lubricity, these sealants allow easy assembly of finely threaded hydraulic and compressed air system components. They're also free of fillers that could contaminate system media. These sealants are anaerobic, so they don’t begin to harden until coated surfaces are threaded together, blocking exposure to air.
Medium Locking Strength—These sealants have medium locking strength, which prevents threads from loosening due to vibration and shock. They require a hand tool to unthread.
Container | Max. Pressure, psi | Temp., ° F | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength, hr. | For Fluids | For Gases | Min. | Max. | For Max. Thread Dia. | Consistency | Certification | Mil. Spec. | Color | Each | |||
Medium Locking Strength | |||||||||||||||||
Vibra-Tite | |||||||||||||||||
| 440 | 0.3 | Bottle | 4 hr. | 24 | 10,000 | 10,000 | -65 | 300 | 2" | Thick Liquid | — | — | Purple | 45855K701 | 00000 | ||
| 440 | 1.7 | Bottle | 4 hr. | 24 | 10,000 | 10,000 | -65 | 300 | 2" | Thick Liquid | — | — | Purple | 45855K703 | 00000 | ||
| 440 | 8.4 | Bottle | 4 hr. | 24 | 10,000 | 10,000 | -65 | 300 | 2" | Thick Liquid | — | — | Purple | 45855K702 | 00000 | ||
| 442 | 1.7 | Tube | 60 min. | 24 | 10,000 | 10,000 | -65 | 300 | 2" | Thick Liquid | — | — | Purple | 45855K705 | 00000 | ||
| 442 | 8.4 | Tube | 60 min. | 24 | 10,000 | 10,000 | -65 | 300 | 2" | Thick Liquid | — | — | Purple | 45855K704 | 00000 | ||
| 444 | 0.3 | Bottle | 60 min. | 24 | 10,000 | 10,000 | -65 | 300 | 2" | Thin Liquid | — | — | Brown | 45855K706 | 0000 | ||
| 444 | 1.7 | Bottle | 60 min. | 24 | 10,000 | 10,000 | -65 | 300 | 2" | Thin Liquid | — | — | Brown | 45855K708 | 00000 | ||
| 444 | 8.4 | Bottle | 60 min. | 24 | 10,000 | 10,000 | -65 | 300 | 2" | Thin Liquid | — | — | Brown | 45855K707 | 00000 | ||
Other Thread Sealants | |||||||||||||||||
| — | 1.7 | Tube | 60 min. | 24 | 10,000 | 300 | -65 | 400 | 2" | Paste | Mil. Spec. UL Listed | MIL-S-15204 | White | 45855K84 | 00000 | ||
| — | 8.4 | Tube | 60 min. | 24 | 10,000 | 300 | -65 | 400 | 2" | Paste | Mil. Spec. UL Listed | MIL-S-15204 | White | 45855K85 | 00000 | ||
Reusable Non-Hardening Thread Sealants for Coarse Threads
 |
Much thicker than sealants for fine threads, these sealants bridge the gaps between coarse threads. Threads coated with these sealants can be installed multiple times without recoating. They have low locking strength, so they prevent threads from loosening due to vibration and can be adjusted without tools. They meet NSF/ANSI 61 for use with drinking water.
Reusable Non-Hardening Thread Sealants for Fine Threads
 |
Formulated to flow into small spaces, use these sealants between fine threads. Threads coated with these sealants can be installed multiple times without recoating. They have low locking strength, so they prevent threads from loosening due to vibration and can be adjusted without tools. They meet NSF/ANSI 61 for use with drinking water.
Non-Hardening High-Temperature Thread Sealants
|
Tube |
Often used in high-vibration applications that could cause standard thread sealants to fail, these never fully harden and remain pliable enough to self-heal and stop leaks before they start. They have low locking strength, so they can be adjusted without tools.
Container | Max. Pressure, psi | Temp. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | For Fluids | For Gases | Min. | Max., ° F | For Max. Thread Dia. | Consistency | Color | Each | |||
Low Locking Strength | ||||||||||||
| 4.4 | Tube | 2,300 | 2,300 | Not Rated | 1,100 | 2" | Paste | Black | 1965K1 | 000000 | ||
Thread Sealant Tape
 |
Made of PTFE, this tape has a slippery surface that keeps threads from binding to make parts easy to assemble.
ePTFE with Graphite—ePTFE tape with graphite creates a better seal between threads than plain PTFE tape, which helps prevent fluid and gas leaks. The graphite attaches to the PTFE, so this tape does not emit harmful VOCs.
Max. Pressure, psi | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. | Lg., yd. | Density, g/cm³ | For Fluids | For Gases | Temp. Range, ° F | For Max. Thread Dia. | Food Industry Std. | Certification | Mil. Spec. | Color | Each | |||
PTFE | ||||||||||||||
0.0025" Thick | ||||||||||||||
| 1/4" | 16 | 0.55 | 10,000 | 10,000 | -450 to 550 | 1/2" | FDA Compliant 21 CFR 177.1550 | UL Listed | — | White | 4591K11 | 00000 | ||
| 3/8" | 16 | 0.55 | 10,000 | 10,000 | -450 to 550 | 1" | FDA Compliant 21 CFR 177.1550 | UL Listed | — | White | 4591K18 | 0000 | ||
| 1/2" | 16 | 0.55 | 10,000 | 10,000 | -450 to 550 | 1" | FDA Compliant 21 CFR 177.1550 | UL Listed | — | White | 4591K12 | 0000 | ||
| 3/4" | 16 | 0.55 | 10,000 | 10,000 | -450 to 550 | 1 1/2" | FDA Compliant 21 CFR 177.1550 | UL Listed | — | White | 4591K13 | 0000 | ||
| 1" | 16 | 0.55 | 10,000 | 10,000 | -450 to 550 | 1 1/2" | FDA Compliant 21 CFR 177.1550 | UL Listed | — | White | 4591K14 | 0000 | ||
0.0032" Thick | ||||||||||||||
| 1/4" | 14 | 0.7 | 10,000 | 10,000 | -450 to 550 | 1/2" | FDA Compliant 21 CFR 177.1550 | Mil. Spec. UL Listed | MIL-T-27730 | White | 6802K11 | 0000 | ||
| 3/8" | 14 | 0.7 | 10,000 | 10,000 | -450 to 550 | 3/4" | FDA Compliant 21 CFR 177.1550 | Mil. Spec. UL Listed | MIL-T-27730 | White | 6802K18 | 0000 | ||
| 1/2" | 14 | 0.7 | 10,000 | 10,000 | -450 to 550 | 1" | FDA Compliant 21 CFR 177.1550 | Mil. Spec. UL Listed | MIL-T-27730 | White | 6802K12 | 0000 | ||
| 3/4" | 14 | 0.7 | 10,000 | 10,000 | -450 to 550 | 1 1/2" | FDA Compliant 21 CFR 177.1550 | Mil. Spec. UL Listed | MIL-T-27730 | White | 6802K13 | 0000 | ||
| 1" | 14 | 0.7 | 10,000 | 10,000 | -450 to 550 | 2" | FDA Compliant 21 CFR 177.1550 | Mil. Spec. UL Listed | MIL-T-27730 | White | 6802K14 | 0000 | ||
| 1 1/2" | 14 | 0.7 | 10,000 | 10,000 | -450 to 550 | 3" | FDA Compliant 21 CFR 177.1550 | Mil. Spec. UL Listed | MIL-T-27730 | White | 6802K15 | 0000 | ||
| 2" | 14 | 0.7 | 10,000 | 10,000 | -450 to 550 | 4" | FDA Compliant 21 CFR 177.1550 | Mil. Spec. UL Listed | MIL-T-27730 | White | 6802K16 | 00000 | ||
ePTFE with Graphite | ||||||||||||||
0.0020" Thick | ||||||||||||||
| 5/8" | 27 | 0.8 | 2,900 | 2,900 | -400 to 500 | 1 1/4" | — | — | — | Gray | 6802K25 | 00000 | ||
Thread Sealant Tape for Stainless Steel Threads
|
This tape is thicker to prevent seizing and galling associated with stainless steel threaded connections. It’s also good for use with other metals. This tape has a higher density than standard tape for a better seal between threads. Made of PTFE, it has a slippery surface that keeps threads from binding to make parts easy to assemble.
Max. Pressure, psi | Each | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. | Lg., ft. | Density, g/cm³ | For Fluids | For Gases | Temp. Range, ° F | For Max. Thread Dia. | Certification | Mil. Spec. | Color | 1-11 | 12-Up | |||
PTFE | ||||||||||||||
0.0043" Thick | ||||||||||||||
| 1/4" | 43 | 1.05 | 10,000 | 10,000 | -450 to 550 | 1 1/2" | Mil. Spec. UL Listed | MIL-T-27730 | Gray | 1726N11 | 00000 | 00000 | ||
| 3/8" | 43 | 1.05 | 10,000 | 10,000 | -450 to 550 | 1 1/2" | Mil. Spec. UL Listed | MIL-T-27730 | Gray | 1726N12 | 0000 | 0000 | ||
| 1/2" | 21 | 1.05 | 10,000 | 10,000 | -450 to 550 | 1 1/2" | Mil. Spec. UL Listed | MIL-T-27730 | Gray | 1726N17 | 0000 | 0000 | ||
| 1/2" | 50 | 1.05 | 10,000 | 10,000 | -450 to 550 | 1 1/2" | Mil. Spec. UL Listed | MIL-T-27730 | Gray | 1726N13 | 00000 | 00000 | ||
| 3/4" | 21 | 1.05 | 10,000 | 10,000 | -450 to 550 | 1 1/2" | Mil. Spec. UL Listed | MIL-T-27730 | Gray | 1726N14 | 0000 | 0000 | ||
| 1" | 21 | 1.05 | 10,000 | 10,000 | -450 to 550 | 1 1/2" | Mil. Spec. UL Listed | MIL-T-27730 | Gray | 1726N18 | 0000 | 0000 | ||
| 1" | 43 | 1.05 | 10,000 | 10,000 | -450 to 550 | 1 1/2" | Mil. Spec. UL Listed | MIL-T-27730 | Gray | 1726N15 | 00000 | 00000 | ||
| 1 1/2" | 43 | 1.05 | 10,000 | 10,000 | -450 to 550 | 1 1/2" | Mil. Spec. UL Listed | MIL-T-27730 | Gray | 1726N16 | 00000 | 00000 | ||
Non-Hardening Thread Sealants
 |  |
Applicator-Top Can | Applicator-Top Bottle |
Often used in high-vibration applications that could cause standard thread sealants to fail, these never fully harden and remain pliable enough to self-heal and stop leaks before they start. Formulated without PTFE, these sealants are less slippery and less likely to result in overtightenting than sealants that have PTFE, making them good for plastic pipe where overtightening could lead to cracks and breaks. They have low locking strength, so they can be adjusted without tools.
Container | Max. Pressure, psi | Temp., ° F | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | For Fluids | For Gases | Min. | Max. | For Max. Thread Dia. | Consistency | Certification | Mil. Spec. | Color | Each | |||
Low Locking Strength | ||||||||||||||
| 2 | Applicator-Top Bottle | 10,000 | 300 | -65 | 450 | 2" | Paste | Mil. Spec. UL Recognized Component | MIL-S-15204 | Gray | 4586K11 | 000000 | ||
| 8 | Applicator-Top Can | 10,000 | 300 | -65 | 450 | 2" | Paste | Mil. Spec. UL Recognized Component | MIL-S-15204 | Gray | 4586K12 | 00000 | ||
Choose-a-Color High-Density Thread Sealant Tape
|
Use color to identify water, gas, and chemical connections. This tape has a higher density than standard tape for a better seal between threads. Made of PTFE, it has a slippery surface that keeps threads from binding to make parts easy to assemble.
Green—Green tape is often used for oxygen.
Orange and Yellow—Orange and yellow tape is commonly used to indicate fuel and gas.
Red—Red tape is often used for water.
Max. Pressure, psi | Each | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. | Lg., yd. | Density, g/cm³ | For Fluids | For Gases | Temp. Range, ° F | For Max. Thread Dia. | Certification | Mil. Spec. | Choose a Color | 1-11 | 12-Up | |||
PTFE | ||||||||||||||
0.0032" Thick | ||||||||||||||
| 1/4" | 14 | 1.2 | 10,000 | 10,000 | -450 to 550 | 1/2" | Mil. Spec. UL Listed | Fed. Spec. A-A-58092 Type II MIL-T-27730 | Green, Orange, Red, Yellow | 44945K11 | 00000 | 00000 | ||
| 3/8" | 14 | 1.2 | 10,000 | 10,000 | -450 to 550 | 3/4" | Mil. Spec. UL Listed | Fed. Spec. A-A-58092 Type II MIL-T-27730 | Green, Orange, Red, Yellow | 44945K17 | 0000 | 0000 | ||
| 1/2" | 14 | 1.2 | 10,000 | 10,000 | -450 to 550 | 1" | Mil. Spec. UL Listed | Fed. Spec. A-A-58092 Type II MIL-T-27730 | Green, Orange, Red, Yellow | 44945K12 | 0000 | 0000 | ||
| 3/4" | 14 | 1.2 | 10,000 | 10,000 | -450 to 550 | 1 1/2" | Mil. Spec. UL Listed | Fed. Spec. A-A-58092 Type II MIL-T-27730 | Green, Orange, Red, Yellow | 44945K13 | 0000 | 0000 | ||
| 1" | 14 | 1.2 | 10,000 | 10,000 | -450 to 550 | 2" | Mil. Spec. UL Listed | Fed. Spec. A-A-58092 Type II MIL-T-27730 | Green, Orange, Red, Yellow | 44945K14 | 00000 | 0000 | ||
| 1 1/2" | 14 | 1.2 | 10,000 | 10,000 | -450 to 550 | 3" | Mil. Spec. UL Listed | Fed. Spec. A-A-58092 Type II MIL-T-27730 | Green, Orange, Red, Yellow | 44945K15 | 00000 | 00000 | ||
| 2" | 14 | 1.2 | 10,000 | 10,000 | -450 to 550 | 4" | Mil. Spec. UL Listed | Fed. Spec. A-A-58092 Type II MIL-T-27730 | Green, Orange, Red, Yellow | 44945K16 | 00000 | 00000 | ||
Thread Sealants
|
Tube |
These thread sealants are anaerobic, so they don’t begin to harden until coated surfaces are threaded together, blocking exposure to air.
Medium Locking Strength—Sealants with medium locking strength prevent threads from loosening due to vibration and shock. They require a hand tool to unthread.
NSF/ANSI 61—To adhere to safety standards for drinking water systems, use sealants that meet NSF/ANSI 61.
Container | Max. Pressure, psi | Temp., ° F | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength, hr. | For Fluids | For Gases | Min. | Max. | For Max. Thread Dia. | Consistency | Food Industry Std. | Certification | Mil. Spec. | Color | Each | |||
Medium Locking Strength | |||||||||||||||||
| 1.7 | Tube | 10 | 24 | 10,000 | 300 | -65 | 400 | 2" | Paste | NSF/ANSI 61 | Mil. Spec. UL Listed | MIL-S-15204 | White | 45855K86 | 000000 | ||
| 8.4 | Tube | 10 | 24 | 10,000 | 300 | -65 | 400 | 2" | Paste | NSF/ANSI 61 | Mil. Spec. UL Listed | MIL-S-15204 | White | 45855K87 | 00000 | ||
