Threaded Rod Brackets | McMaster-Carr

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

Forward

How can we improve?

1,874 Products

Selecting U-Bolts Using Pipe, Conduit, or Tubing Trade Size

Strut Mount Hangers

Slip these hangers onto the lip of top-opening strut channel to attach chain, wire rope, pipe, and threaded rod.

U-Bolts

Mount these general purpose U-bolts into an existing bracket, or combine with a mounting plate for a secure hold at the mounting surface.

U-Bolts with Mounting Plates

A mounting plate provides a more secure hold at the mounting surface.

Square U-Bolts

Suspend and route flat-bottomed objects such as strut channel and small duct.

Clamping U-Bolts

Also known as muffler clamps, these U-bolts have a rounded mounting plate that fully surrounds pipe, conduit, and tubing for a secure fit.

Rubber-Cushioned U-Bolts

A durable rubber cushion and mounting plate prevent corrosion and wear caused by metal-to-metal contact. The mounting plate is removable, so the U-bolts can be installed onto an existing line without needing to dissemble it.

Vibration-Damping U-Bolts

Reduce vibration and noise in your lines—a plastic cushion tightly grips pipe, tubing, and conduit to prevent movement. Nylon-insert locknuts grip the thread to resist loosening.

Rubber-Cushioned Square U-Bolts

Reduce vibration and prevent metal-to-metal corrosion on flat-bottomed objects such as strut channel and small duct.

Nonconductive U-Bolts

These fiberglass-reinforced polyurethane U-bolts have no metal parts, so they won't conduct electricity or cause metal-to-metal corrosion.

Threaded Rod Mounts

Fasten these brackets to ceilings, walls, beams, and joists to hang threaded rod.

Threaded Rod Eye Nuts

Add an eye nut to threaded rod to hang the rod from rings, hooks, and hangers.

Threaded Rod Anchors

Install directly into a mounting surface to suspend threaded rod from ceilings and walls.

Threaded-Rod-Mount Clamping Hangers

Also known as conduit hangers, these hangers load from the bottom so you can add or remove material without removing the mounted hanger.

Snug-Hold Threaded-Rod-Mount Clamping Hangers

Load material between the two halves of the ring and adjust the side bolts for a tighter fit than standard threaded-rod-mount clamping hangers.

Adjustable Clamping Hangers

A time-saving alternative to strap hangers, these hangers fit a range of material sizes without any cutting and easily adjust after they’re installed.

Stackable Threaded-Rod-Mount Clamping Hangers

Mount these hangers on top of one another to organize multiple lines of pipe, tubing, and conduit at any angle.

Vibration-Damping
Threaded-Rod-Mount Clamping Hangers

Rubber cushions fit material tightly to reduce vibration and provide a more secure hold than loop hangers. The cushions also protect material from sharp edges and prevent corrosion caused by metal-to-metal contact.

Washdown Vibration-Damping
Threaded-Rod-Mount Clamping Hangers

These hangers provide maximum corrosion resistance in wet environments and stand up to frequent washdowns with harsh cleaners and sanitizers. Rounded edges, polished surfaces, and acorn or hex nuts that conceal threads reduce the number of places for bacteria to grow and make them easier to clean.

Stackable Vibration-Damping
Threaded-Rod-Mount Clamping Hangers

Connect these hangers to organize multiple lines of pipe, tubing, and conduit. The tight-fitting, santoprene body reduces vibration and prevents corrosion caused by metal-to-metal contact.

Push-to-Lock Plastic Clamping Hangers

Lock your line in faster than any other hanger. These hangers automatically close when you press your line into the clamp.

Plastic Clamping Hangers

These plastic hangers prevent corrosion caused by metal-to-metal contact. Push them closed for a more secure hold on material than loop hangers.

Quick-Mount Plastic Clamping Hangers

Clip these hangers onto the side of threaded rod. Unlike other threaded-rod-mount hangers, you can use more than one hanger on the same rod to organize multiple lines of pipe, tubing, and conduit.

Stainless Steel Threaded-Rod-Mount Loop Hangers

Use these hangers in corrosive environments and where chemicals are present. They're also known as teardrop hangers. Combine with a threaded rod or other fastener to hang from the ceiling.

Side-Load Threaded-Rod-Mount Loop Hangers

Access material quickly without uninstalling the mounted hanger. These hangers have a removable bolt for loading pipe, tube, and conduit from the side. Combine them with a threaded rod or other fastener to hang from the ceiling.

Pivoting Threaded-Rod-Mount Loop Hangers

Also known as clevis hangers, these have a pivoting loop that adjusts for line movement and vibration. Combine with a threaded rod or other fastener to hang from the ceiling.

Swivel Threaded-Rod-Mount Loop Hangers

These hangers have a swivel nut for adjusting direction after mounting. They're also known as teardrop hangers. Combine with a threaded rod or other fastener to hang from the ceiling.

Threaded-Rod-Mount Roller Loop Hangers

A roller on the bottom of these hangers compensates for movement due to expansion and contraction, such as in hydraulic applications. Combine with a threaded rod or other fastener to hang from the ceiling.

Threaded-Rod-Mount Multiline Hangers

Route multiple lines of pipe, tubing, and conduit with a single hanger. A wide opening and locking tab allow access for installation, adjustment, and removal.

Weld-Mount Clamping Hangers

For a strong, secure connection, mount these hangers by welding them to a rod.

Suspension Beams for Threaded Rod

Mount these beams across parallel roof joists to hang threaded rod and route pipe, duct, and other overhead systems in areas where there’s no anchoring point.

Angle Iron Clamps for Threaded Rod

A secure way to hang threaded rod from a pair of angles, such as those used in ceiling joists, without the need to drill or weld. These clamps are commonly used to suspend HVAC, conveyor, and other overhead systems.

Beam Clamps for Threaded Rod

Attach these clamps to the flange of an beam, then hang a threaded rod from the threaded hole.

Press-Fit Beam Clamps for Threaded Rod

A toothed clip secures these clamps to the beam—no fasteners required.

Sloped Beam Clamps for Threaded Rod

These clamps rotate 360° and pivot 45° to ensure the rod hangs straight, even on sloped beams.

Angled Beam Clamps for Threaded Rod

Also known as purlin clamps, these clamps are shaped to fit around beams that have a 45° or 90° lip.

Center-Mount Beam Clamps for Threaded Rod

For centered load distribution, these clamps grip both sides of the beam and hang threaded rod from the middle.

Parallel Beam-to-Beam Clamps

Join two beams in a straight line.

Beam Clamps for Strut Channel

Support strut channel at a right angle to the beam.

Routing Rings

Also known as bridle rings, routing rings have an open-eye design that allows you to quickly install wire and cable.

Removable Routing Ringbolts

Anchor these ringbolts where you need them, then remove the ring when not in use. Once installed, the mounting bolt stays in place. Insert the ring by threading into the mounting bolt; remove by unthreading it.

Routing Ringbolts

Mount these ringbolts into a threaded hole, or use the nut for through-hole mounting. The pivoting ring allows material to move freely.

Seismic Bracing Anchors and Brackets

These OSHPD preapproved anchors and brackets support threaded-rod-mount hangers during seismic activity.

Railing Clamps

Clamp onto metal tubes such as pipe, scaffolding, and railing to hang lighting fixtures, threaded rod, and equipment.

Tie Wire Hangers

Attach these light duty hangers to ceilings and walls. They have a stiff wire for supporting suspended ceilings and lighting fixtures.

Threaded Rod Vibration Dampers

Install between two lengths of threaded rod to reduce vibration in suspended equipment, such as air-handling units, pipe, and duct.

Brackets for Overhead Enclosed-Track Conveyors

Use brackets to hang and join sections of enclosed track.

Screw Eyes

With threads on one end, screw eyes can be easily screwed into wood. They are often used with wire to hang pictures.