McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    34 Products

    Tool Lanyards

    Tether your tools to prevent accidental drops that could injure people and damage equipment below. These lanyards meet ANSI/ISEA 121 for design and performance to ensure safety when working at height. To properly tether your tool, you’ll need an attachment point on your tool and an anchor point for your lanyard.
    For Hand Tools
    Image of ProductInUse. Hand Tool Not Included. Front orientation. Tool Lanyards. Tool Lanyards, For Hand Tools.

    Hand Tool Not Included

    Image of Product. Elastic Loop. Front orientation. Tool Lanyards. Tool Lanyards, For Hand Tools, Straight Lanyard, Elastic-Loop Connection.
    Image of Product. Detachable Elastic Loop. Front orientation. Tool Lanyards. Tool Lanyards, For Hand Tools, Straight Lanyard, Detachable-Elastic-Loop Connection.
    Image of Product. Carabiner for 1 Tool (Straight). Front orientation. Tool Lanyards. Tool Lanyards, For Hand Tools, Straight Lanyard, Carabiner Connection.

    Elastic Loop

    Detachable Elastic Loop

    Carabiner for 1 Tool

    (Straight)

    Image of Product. Carabiners for 2 Tools. Front orientation. Tool Lanyards. Tool Lanyards, For Hand Tools, Straight Lanyard, Carabiner Connection.
    Image of Product. Carabiner for 1 Tool (Coiled). Front orientation. Tool Lanyards. Tool Lanyards, For Hand Tools, Coil Lanyard, Carabiner Connection.
    Image of Product. Webbing Loop. Front orientation. Tool Lanyards. Tool Lanyards, For Hand Tools, Coil Lanyard, Webbing Loop Connection.

    Carabiners for 2 Tools

    Carabiner for

    1 Tool (Coiled)

    Webbing Loop

    Lanyards for hand tools are the standard option—they can be used on most tools in your toolbox.
    Straight Lanyard—Straight lanyards have elastic in the webbing that stretches a little as you use your tool for ease of movement.
    Coil Lanyard—Coil lanyards stretch to their full length and then return to their retracted length when you let go to prevent snags and tangles.
    Wire Rope—Wire rope lanyards are more abrasion resistant than webbing lanyards. A rubber coating protects the stainless steel wire rope from corrosion.
    Detachable-Elastic-Loop Connection—Lanyards with a detachable elastic loop let you swap out tools while leaving the anchor and lanyard setup in place.
    Lanyards
    Replacement
    Detachable Elastic Loops
    Connection Type
    For No.
    of Tools
    Wt. Cap.,
    lb.
    Lg.
    Retracted
    Lg.
    Extended
    Lg.
    Coating Material
    Material
    For Min. Tool
    Opening
    Carabiner
    Material
    Features
    Specs. Met
    Each
    Pkg.
    Qty.
    Pkg.
    Straight—Webbing
    Carabiner × Elastic Loop11035"———Nylon
    		3/8"Aluminum
    		Cord LockANSI/ISEA 1211009N11000000————0
    Carabiner × Detachable Elastic Loop1538"———Nylon
    		3/8"Aluminum
    		Cord LockANSI/ISEA 1211009N310000031009N4100000
    Carabiner × Carabiner11035"———Nylon
    		1/4"Aluminum
    		—ANSI/ISEA 1211009N2100000————0
    Carabiner × Carabiner × Carabiner21535"———Nylon
    		1/4"Stainless Steel
    		—ANSI/ISEA 1211009N7100000————0
     
    Coil—Wire Rope
    Carabiner × Carabiner15—7"48"Polyurethane Rubber
    		Stainless Steel
    		1/4"Stainless Steel
    		—ANSI/ISEA 1211009N1200000————0
     
    Coil—Webbing
    Carabiner × Webbing Loop125—42"109"—Nylon
    		3/8"Stainless Steel
    		—ANSI/ISEA 1211009N1500000————0
    Carabiner × Carabiner125—55"112"—Nylon
    		3/8"Stainless Steel
    		—ANSI/ISEA 1211009N1600000————0
     
    For Power Tools
    Image of ProductInUse. Power Tool Not Included. Front orientation. Tool Lanyards. Tool Lanyards, For Power Tools.

    Power Tool Not Included

    Lanyards for power tools wrap around the battery and base to hold the tool securely.
    Straight Lanyard—Straight lanyards have elastic in the webbing that stretches a little as you use your tool for ease of movement.
    Connection Type
    For No.
    of Tools
    Wt. Cap.,
    lb.
    Lg.
    Material
    For Min. Tool
    Opening
    Carabiner
    Material
    Specs. Met
    Each
    Straight—Webbing
    Carabiner × Webbing Loop11038"Nylon
    		7/16"Aluminum
    		ANSI/ISEA 1211009N13000000
     
    For Tape Measures
    Image of ProductInUse. Tape Measure Not Included. Front orientation. Tool Lanyards. Tool Lanyards, For Tape Measures.

    Tape Measure Not Included

    Lanyards for tape measures wrap securely around all four sides while leaving the tape accessible.
    Straight Lanyard—Straight lanyards have elastic in the webbing that stretches a little as you use your tool for ease of movement.
    Connection Type
    For No.
    of Tools
    Wt. Cap.,
    lb.
    Lg.
    Material
    For Min. Tool
    Opening
    Carabiner
    Material
    Specs. Met
    Each
    Straight—Webbing
    Carabiner × Webbing Loop1238"Nylon
    		7/16"Aluminum
    		ANSI/ISEA 1211009N14000000
     

    Tool Lanyard Kits

    Image of Product. Front orientation. Tool Lanyards. Tool Tethering Kits.
    Everything you need to keep tools close to you while you work at height. These kits prevent tools from accidentally falling and hurting someone or damaging equipment below. The components in these kits meet ANSI/ISEA 121 design and performance safety standards. To tether your tools properly, combine a tool attachment point with a lanyard and secure it to an anchor point.
    No. of
    Pieces
    Includes
    Specs. Met
    Each
    24Six Webbing Tool Attachment Points
    Six Wire Tool Attachment Points
    Three Elastic Tool Attachment Points
    Two Coiled Tool Lanyards—Carabiner × Loop
    Straight Tool Lanyard—Carabiner × Loop
    Straight Tool Lanyard—Carabiner × Carabiner
    Two Rolls of Tool Tape
    Tape Measure Holder
    Power Tool Holder
    Glove Clip    		ANSI/ISEA 1219835N110000000

    Tool Tether Attachments

    Tether almost any tool—these attachments add a ring for a lanyard connection. When used together with a lanyard and an anchor, they prevent tools from accidentally falling and hurting someone or damaging equipment below.
    Clip-On Attachment
    Image of ProductInUse. Front orientation. Tool Tether Attachments. Clip-On Attachment.
    Image of Product. Front orientation. Tool Tether Attachments. Clip-On Attachment.
    Image of Attribute. Front orientation. Contains Annotated.
    Clip-on attachments are for long-necked tools with wide ends, such as wrenches, pry bars, and hammers. The end of your tool needs to be wider than where the attachment point rests, so it won’t slip off. Made of stainless steel, they resist corrosion and are more durable than other attachments. They may slide up and down the tool as you use them. Add threadlocker to the pin to prevent loosening over time.
    ANSI/ISEA 121—They meet ANSI/ISEA 121 for design and performance to ensure safety when working at height.
    Wt. Cap.,
    lb.
    Ring Inside
    Wd.
    Ring Inside
    Lg.
    For No.
    of Tools
    Material
    Construction
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    Rigid Ring
    150.4"0.75"1Stainless Steel
    		SolidANSI/ISEA 12129860N1100000
    150.5"1"1Stainless Steel
    		SolidANSI/ISEA 12129860N1200000
    150.65"1.25"1Stainless Steel
    		SolidANSI/ISEA 12129860N1300000
    150.8"1.5"1Stainless Steel
    		SolidANSI/ISEA 12129860N1400000
     
    Tape-On Attachment
    Image of ProductInUse. Front orientation. Tool Tether Attachments. Tape-On Attachment.
    Image of Product. Attachment. Front orientation. Tool Tether Attachments. Tape-On Attachment.
    Image of Attribute. Front orientation. Contains Annotated.

    Attachment

    Tape-on attachments work for almost any tool. Use them on screwdrivers, pliers, and other hand tools. Loop the webbing with a D-ring around your tool, cinch it tight, and secure with tape (sold separately). The flexible tape molds to surfaces of different shapes and sizes.
    ANSI/ISEA 121—They meet ANSI/ISEA 121 for design and performance to ensure safety when working at height.
    Tool Tether Attachments
    Tool Tether
    Attachment Tape
    Wt. Cap.,
    lb.
    Ring Inside
    Wd.
    Ring Inside
    Lg.
    For No.
    of Tools
    Material
    Construction
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    Each
    Rigid Ring
    51"0.94"1Nylon
    		WebbingANSI/ISEA 12139860N220000009860N25000000
    101"0.94"1Nylon
    		WebbingANSI/ISEA 12139860N23000009860N2500000
    151"0.94"1Nylon
    		WebbingANSI/ISEA 12119860N2400009860N2500000
     
    Swivel Ring
    50.55"0.45"1Nylon
    		WebbingANSI/ISEA 12139860N19000009860N2500000
    150.53"0.54"1Nylon
    		WebbingANSI/ISEA 12139860N21000009860N2500000
     

    Wrist Tool Lanyards

    Image of ProductInUse. Front orientation. Tool Lanyards. Wrist Tool Lanyards.
    Image of Product. Wristband × Elastic Loop. Front orientation. Tool Lanyards. Wrist Tool Lanyards, Straight Lanyard, Elastic-Loop Connection.
    Image of Product. Wristband × Detachable Elastic Loop. Front orientation. Tool Lanyards. Wrist Tool Lanyards, Straight Lanyard, Detachable-Elastic-Loop Connection.

    Wristband × Elastic Loop

    Wristband × Detachable Elastic

    Loop

    Image of Product. Wristband × Retractable Detachable Elastic Loop. Front orientation. Tool Lanyards. Wrist Tool Lanyards, Straight Lanyard, Retractable Detachable Elastic Loop Connection.
    Image of Product. Wristband × Carabiner. Front orientation. Tool Lanyards. Wrist Tool Lanyards, Straight Lanyard, Carabiner Connection.

    Wristband × Retractable

    Detachable Elastic Loop

    Wristband × Carabiner

    Tethered to your wrist, your tools will always be within reach. When working at height, these lanyards prevent accidental drops that could harm people and damage equipment below. They meet ANSI/ISEA 121 for design and performance to ensure safety. To properly tether your tool, you’ll need an attachment point on your tool.
    Detachable-Elastic-Loop Connection—Lanyards with a detachable elastic loop let you quickly disconnect tools from the wristband—no need to undo the loop. Add more detachable loops (sold separately) so you can have other tools ready to snap in.
    Lanyards
    Replacement
    Detachable Elastic Loops
    Connection Type
    For No.
    of Tools
    Wt. Cap.,
    lb.
    Lg.
    Retracted
    Lg.
    Extended
    Lg.
    Material
    For Min. Tool
    Opening
    For Max. Wrist
    Circumference
    Carabiner
    Material
    Features
    Specs. Met
    Each
    Pkg.
    Qty.
    Pkg.
    Straight—Rope
    Wristband × Elastic Loop1510"——Nylon
    		7/64"10 1/4"—Cord LockANSI/ISEA 1219794N1100000————0
    Wristband × Detachable Elastic Loop1510"——Nylon
    		3/16"10 1/4"—Cord LockANSI/ISEA 1219794N120000039794N14000000
    Wristband × Retractable Detachable Elastic Loop11—8 1/2"46"Nylon
    		9/32"10 1/4"—Cord LockANSI/ISEA 1219794N130000039794N1500000
     
    Straight—Webbing
    Wristband × Carabiner157"——Nylon
    		1/2"10"Aluminum
    		—ANSI/ISEA 1219794N1600000————0
     

    Retractable Tool Lanyards

    Keep tools within reach when you need them and out of the way when you don’t—these lanyards retract to prevent snags and tangles. They meet ANSI/ISEA 121, which certifies that their design keeps your tool from falling and harming people and equipment below when you’re working at height. An extension lock on these lanyards keeps it retracted until you’re ready to use it. To properly tether your tool, you’ll need an attachment point on your tool and an anchor point for your lanyard
    For Hand Tools
    Image of ProductInUse. Front orientation. Tool Lanyards. Retractable Tool Lanyards, For Hand Tools.
    Image of Product. Belt Clip × Detachable Elastic Loop. Front orientation. Tool Lanyards. Retractable Tool Lanyards, For Hand Tools, Detachable-Elastic-Loop Connection.
    Image of Product. Carabiner × Carabiner. Front orientation. Tool Lanyards. Retractable Tool Lanyards, For Hand Tools, Carabiner Connection.

    Belt Clip

    ×

    Detachable

    Elastic

    Loop

    Carabiner

    ×

    Carabiner

    Detachable-Elastic-Loop Connection—Lanyards with a detachable elastic loop let you swap out tools while leaving the anchor and lanyard setup in place.
    Lanyards
    Replacement
    Detachable Elastic Loops
    Connection Type
    For No.
    of Tools
    Wt. Cap.,
    lb.
    Retracted
    Lg.
    Extended
    Lg.
    Material
    Housing
    Material
    For Min. Tool
    Opening
    For Max.
    Belt Wd.
    Carabiner
    Material
    Features
    Specs. Met
    Each
    Pkg.
    Qty.
    Pkg.
    Rope
    Belt Clip × Detachable Elastic Loop129"50"Nylon
    		Plastic1/4"2 1/4"—Cord Lock, Extension LockANSI/ISEA 1218448N11300000038448N114000000
    Carabiner × Carabiner1412 1/2"50"Nylon
    		Plastic1/4"—Stainless Steel
    		Extension LockANSI/ISEA 1218448N11500000————0
     

    Tool Tether Anchors

    Image of ProductInUse. Front orientation. Tool Tether Anchors. Slide On.
    Image of ProductInUse. Front orientation. Tool Tether Anchors. Wraparound.
    Image of ProductInUse. Front orientation. Tool Tether Anchors. Wraparound with Extra-Wide D-Ring.

    Slide On

    Wraparound

    Wraparound

    with

    Extra-Wide

    D-Ring

    Clip your tool’s lanyard to these anchors while working at height—they prevent tools from falling and hurting someone or damaging equipment below. You’ll need an attachment point on your tool and a lanyard to properly tether your tool.
    Slide On—Slide-on anchor points attach to your harness or tool belt. They’re a good choice for anchoring hand tools.
    Wraparound—Wraparound anchor points attach to rated structures such as railings and scaffolding. They support heavy tools without weighing you down.
    Wraparound with Extra-Wide D-Ring—Wraparound anchor points with an extra-wide D-ring work well when you need to swap between multiple tools. You can attach up to five tool lanyards.
    Nylon Cover—A nylon cover protects the webbing from rubbing and scraping for an extended lifespan.
    ANSI/ISEA 121—To ensure safety, they meet ANSI/ISEA 121 for design and performance.
    Wt. Cap.,
    lb.
    For No.
    of Tools
    Connection
    Hardware
    Material
    Cover
    Material
    Construction
    For Max.
    Dia.
    Specs. Met
    Each
    Slide On
    151D-RingNylon
    		—Webbing2 1/2"ANSI/ISEA 1219865N1100000
     
    Wraparound
    251D-RingPolyester Plastic—Webbing6"ANSI/ISEA 1219865N1300000
     
    Wraparound with Extra-Wide D-Ring
    505D-RingNylon
    		Nylon
    		Webbing6"ANSI/ISEA 1219865N1200000
     

    Hard Hat Lanyards

    Image of ProductInUse. Front orientation. Hard Hat Lanyards.
    Attach to your hard hat to prevent accidental drops. These lanyards meet ANSI/ISEA 121, which certifies that their design keeps your hard hat from falling and harming people and equipment below.
    Lg.
    Material
    Construction
    Connection Type
    Specs. Met
    Each
    23 1/4"Polyester/RubberWebbingElastic Strap with Cinching Buckle × Cinching BuckleANSI/ISEA 1211009N8100000
    back to top