We will reply to your message within an hour.
These boxes are made with an additive that protects sensitive contents from electrostatic discharge.
A rubber seal in the lid keeps water out.
Use a box as is, or snap on additional boxes to create a mobile storage system that fits your needs.
Each compartment is a removable bin cup, so you can reconfigure the box without emptying the contents.
Adjust the dividers to create the size and number of compartments that you need.
These boxes have durable hinges and are more shatter resistant than other compartmented boxes.
A rubber gasket provides a watertight seal.
At 5/8" tall and under, these boxes fit in spaces other boxes can’t.
These boxes have a coating on the dividers that protects metal parts from rust and corrosion.
Handy on forklifts and scaffolding, these trays hang on square and rounded rails to keep tools and supplies waist height.
Organize and carry pipe nipples.
Hold and transport material with these boxes. They nest and stack for easy storage.
Place these boxes on top of each other to make the most of your storage or shipping space.
Move and store materials in your food processing facility with these tote boxes—they have metal and chemical additives that will set off metal detectors and show up on X-ray machines if a piece falls into your line.
These tote boxes resist most chemicals, solvents, and oils.
Keep contents secure by attaching a padlock to both ends.
Choose the box and number of dividers you need. The dividers fit into molded slots in the boxes to create compartments.
When used with a lid, these tote boxes protect contents from electrostatic discharge.
Save storage space with these collapsible tote boxes. They collapse to one-third their overall size.
Interlock the hinged lids and fasten them together with a wire seal or cable tie to securely store and transport contents.
With a capacity of 150 lbs., these are our strongest vented tote boxes.
These tote boxes are nestable in one direction and stackable when turned in the opposite direction.
The handholds allow stacking when locked upright and nesting when pushed down.
With an impact-resistant shell and foam-padded interior, these cases will protect your equipment for years to come.
These versatile storage cases can be used with removable inner pouches.
Remove foam cubes to create a snug fit around equipment.
Attach these bin boxes to any steel surface, such as machinery and cabinets, to keep small tools and parts nearby.
A lip on the back allows bin boxes to hang from rails or louvered panels.
These chests have floor-mounting baseplates so they can be locked in place or detached for portability.
The door is rimmed with a gasket to keep out moisture and dust. These chests are often mounted to the underbed of a truck.
These durable chests are dent resistant.
These chests are lightweight and corrosion resistant.
Designed for marine environments, these chests have stainless steel hardware, so no parts will rust or corrode, even in saltwater.
Also known as job boxes, these chests secure equipment and supplies on-site.
Mesh construction provides visibility and air circulation. The hinged lid and drop-front gate allow quick access to large equipment.
Organize equipment and supplies in these chests, also known as job boxes.
Remove the stackable cabinet and carry only the tools you need.
Protect against corrosion with these stainless steel cabinets.
Store your heaviest tools and parts. Use cabinets individually, stacked, or connect side-by-side.
Keep your heaviest tools and parts in a single cabinet, or stack them for more storage.
Use cabinets individually or stacked on top of compatible bench-height drawer cabinets.
Use cabinets individually, stacked, or connect side-by-side.
Use cabinets individually or stacked.
Keep tools and small parts in place and protected from damage.
These liners are treated to protect your tools against rust.
Protect drawer beds and tools from scratches and dents.
These cabinets won't dent, chip, or rust.
Cabinets are stackable with others of the same width and depth.
Protect your sensitive components from electrostatic damage.
Remove individual boxes to take the parts you need without moving the entire storage unit.
Plastic cabinets and boxes won't dent, chip, or rust.
Carry multiple compartmented boxes at once using the built-in handle.
Create your own storage system by choosing a frame and adding boxes, which come in a variety of compartment configurations.
These safes maintain a lower interior temperature than other safes to protect heat-sensitive media such as hard drives and CDs.
These safes meet UL Class 350 requirements to maintain an interior temperature of 350° F or less after being subjected to 1700° F for two hours.
Turn a tight space into an efficient storage center with these shallow-depth cabinets.
Mesh sides on this cabinet allow air circulation and visibility.
These cabinets are scratch and corrosion resistant for extra durability outdoors.
Keep an eye on inventory without opening the doors.
These cabinets have open shelves for storing larger supplies and equipment.
This cabinet is built to store your heaviest supplies, parts, and equipment.
These cabinets have the thickest steel construction that we offer and come with removable bin boxes that hang from panels.
These cabinets have one undivided drawer.
The drawer is divided into labeled compartments.
Store multiple bits of each size. These cabinets have drawers marked with the sizes and decimal equivalents.
The compartments are sized to hold two reduced-shank drill bits and are marked with the bit size.
Store and organize drill bits so they stay in good working condition and don't go missing.
Protect and store your circular saw blades.
These workbenches are dent and rust resistant.
Tilt back these workbenches to roll them anywhere. Open the lid to use it as a work surface.
Snap any combination of bin cups onto the liner to create a custom configuration for organizing small parts.
Mount these workstations on a flat vertical surface to create a steady horizontal surface for writing, typing, or tinkering.
Protect Starrett dial flatness gauges while storing and transporting them with these specially fitted cases.
Specifically designed to fit Mitutoyo depth gauges, these cases protect your tools while storing and transporting them.
Protect Starrett depth gauges while storing and transporting them with these specially fitted cases.
Store and transport your Starrett combination square in these protective cases that are specially fitted.
Bins can be stacked on a surface, wall mounted, or attached to a rack.
Racks can be used individually or stacked up to nine high.
Bins slope slightly and have a lip to keep contents in place.
Pull out the bin boxes for easy access to contents.
Dividers snap in and out, allowing you to adjust the width of the compartments.
Roll these bins near benches or other work areas, and turn each storage level to access the items you need.
Create storage that fits your space with these stackable bin shelves.
Store multiple tools and parts in these bins, which spin so you can easily access the item you need.
Add valuable storage space with these weather- and rust-resistant sheds.
In addition to resisting weather, rust, rot, and dents, these sheds snap together for easy assembly.
Avoid trips up and down step ladders to get tools and supplies—mount these trays to top steps that are 13 1/2" to 14" wide and 6" to 6 1/2" deep to keep items securely within reach.