Torque Guns | McMaster-Carr

Filter by

Grip Type

Square Drive Size

Power Source

Torque

250 ft·lbf to 499 ft·lbf

500 ft·lbf to 999 ft·lbf

1,000 ft·lbf to 1,999 ft·lbf

2,000 ft·lbf or greater

Driver Type

Manufacturer

Maximum Torque

500 ft·lbf to 999 ft·lbf

1,000 ft·lbf to 1,499 ft·lbf

1,500 ft·lbf to 1,999 ft·lbf

2,000 ft·lbf or greater

Voltage

For Bit Shank Type

Grip Style

Socket Retainer Style

Hole

Ring

Ring and Hole

Maximum Working Torque

Batteries Included

Unit of Measure

Drive Size

Shank Type

Air Hose ID

Speed Control

Drive Direction

Clockwise and Counterclockwise

Battery Charger Included

Yes

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

DFARS Specialty Metals

Exempt

RoHS

Compliant

Compliant with Exemptions

Not Compliant

Export Control Classification Number (ECCN)

REACH

Weight

123 Products

Air-Powered Impact Wrenches


Pistol Grip	Straight Grip	D-Handle Grip

Ring Socket

Retainer

Hole Socket

Retainer

Loosen stubborn fasteners—these wrenches operate at full torque counterclockwise to break stuck bolts free. You can also use them clockwise within their working torque range to tighten fasteners more quickly than with manual wrenches. Use these wrenches with impact sockets only. Air-powered tools require lubrication to operate properly.

D-Handle Grip—D-handle grip wrenches are heavier than straight or pistol grip wrenches, so you need to use two hands to deliver their full power.

Ring Socket Retainer—Ring-style socket retainers are good for quick socket changes—just pull the socket off the retainer and push on another one.

Ring and Hole Socket Retainer—Ring-and-hole and hole-style socket retainers hold sockets more securely than ring-style retainers and require a retaining ring. Hole-style socket retainers are also known as positive locking retainers.

	Wrenches																		Replacement Retaining Rings
							Air Inlet
	Max. Torque, ft·lbf	Working Torque, ft·lbf	Grip Style	No. of Speeds	Max. No-Load Rotational Speed, rpm	Average Air Consumption @ Pressure	Pipe Size	Thread Type	Gender	For Air Hose ID	Overall Lg.	Wt., lb.	Socket Retainer Style	Retaining Ring Req.	Features	Includes		Each		Each
1/4" Square Drive



		55	25 to 40	Pistol	1	14,500	Not Rated	1/4	NPT	Female	3/8"	6 7/8"	1.5	Ring	No	—	1/4" Drive 6-Point Sockets (Inch): 3/16", 1/4", 3/8", 1/2", 9/16" 1/4" Drive 6-Point Sockets (Metric): 4 mm, 6 mm, 10 mm, 12 mm, 14 mm	7176A18	0000000	7176A63	00000


		3/8" Square Drive



				90	5 to 65	Straight	4	9,500	3.2 ft³/min @ 90 psi	1/4	NPT	Male	3/8"	6 3/8"	2.1	Ring	No	—	—	7182A15	000000	———	0


				380	310 to 380	Pistol	Variable	6,000	24 ft³/min @ 90 psi	1/4	NPT	Female	3/8"	4 5/8"	2.4	Ring	No	—	—	7176A111	000000	———	0


				1/2" Square Drive



						450	105 to 310	Pistol	1	9,000	19 ft³/min @ 90 psi	1/4	NPT	Female	1/4"	4 7/16"	2.9	Ring	No	—	—	7176A114	000000	———	0


						450	400 to 450	Pistol	Variable	8,000	4 ft³/min @ 90 psi	1/4	NPT	Female	3/8"	4 5/8"	2.4	Ring	No	—	—	7176A112	000000	———	0
						600	35 to 300	Pistol	1	8,000	4.2 ft³/min @ 90 psi	1/4	NPT	Female	3/8"	7 3/8"	5.8	Ring	No	—	—	5828A13	000000	7176A1	00000
						950	75 to 550	Pistol	1	7,000	25 ft³/min @ 90 psi	1/4	NPT	Female	1/4"	6 7/8"	4.5	Ring	No	—	—	7176A115	000000	———	0
						1,500	200 to 1,000	Pistol	1	7,500	9 ft³/min @ 90 psi	1/4	NPT	Female	3/8"	7 3/8"	4.4	Ring	No	—	—	71655A47	000000	71655A11	0000


						3/4" Square Drive



								1,050	200 to 800	Pistol	1	6,000	8 ft³/min @ 90 psi	3/8	NPT	Female	3/8"	8 5/8"	8.8	Ring	No	—	—	71805A42	000000	7176A2	00000


								2,000	900 to 1,300	Pistol	1	5,500	36 ft³/min @ 90 psi	3/8	NPT	Female	1/2"	8 1/2"	7.8	Hole	Yes	—	—	7177A34	000000	7177A42	00000


								1" Square Drive



										1,300	200 to 900	Pistol	Variable	5,500	14 ft³/min @ 90 psi	3/8	NPT	Female	1/2"	8 1/2"	8	Ring and Hole	Yes	—	—	7176A113	000000	———	0


										1,300	255 to 1,050	D-Handle	1	6,600	40 ft³/min @ 90 psi	1/2	NPT	Female	1/2"	11 7/16"	14.5	Ring	No	Side Handle	—	7176A117	000000	———	0
										1,400	300 to 1,050	Pistol	1	6,500	31 ft³/min @ 90 psi	3/8	NPT	Female	3/8"	8 1/16"	7.3	Ring and Hole	Yes	—	—	7176A116	000000	———	0


										1 1/2" Square Drive



												2,850	450 to 1,950	D-Handle	1	4,300	99 ft³/min @ 90 psi	1/2	NPT	Female	1/2"	17 3/8"	31.6	Ring and Hole	Yes	Side Handle	—	7176A118	00000000	———	0

Cordless Impact Drivers


Style A	Style B	Style C

Style D	Style E	Style F

These tools deliver powerful rotational blows to maximize torque and drive screws quickly, even through thick or dense material. Some drivers include rechargeable batteries that provide power wherever you need it. For other drivers, batteries and chargers are sold separately.

Styles A-C—For Style A-C drivers, you can add a right-angle attachment (sold separately) to extend the reach and angle of the drivers to get into hard-to-reach spots.

Style F—Style F drivers have a detachable right-angle head that can be replaced with a straight head attachment (sold separately) to convert them to a straight-line tool.

Bluetooth Connection—Style C drivers with Bluetooth compatibility connect to a mobile app, so you can track their location, customize their settings, view data usage, and receive alerts before they need repair.

Cannot Be Sold To—Drivers and attachments that cannot be sold to the listed areas are restricted due to product regulations.

Manufacturer and Model No.	Voltage, V DC	Max. Torque, ft·lbf	No. of Speeds	Max. No-Load Rotational Speed, rpm	Overall Lg.	Wt., lb.	Batteries Included	No. of Batteries Req.	Certification	Includes	Data Connection	Features	Cannot Be Sold To		Each



A	DeWalt DCF801F2	12	120	3	2,850	5"	1.75	Yes	1	UL Listed	UL Listed Charger	—	Built-In Light	—	53145A85	0000000


A	DeWalt DCF845B	20	152	3	3,400	5 1/8"	2	No	1	—	—	—	Built-In Light	—	53145A75	000000
A	DeWalt DCF845P1	20	150	3	3,400	5 1/8"	2.00	Yes	1	UL Listed	UL Listed Charger	—	Built-In Light	—	53145A841	000000
B	Milwaukee 3453-20	12	125	Variable	3,600	5"	1.6	No	1	—	—	—	Built-In Light	—	54275A61	000000
B	Milwaukee 3453-22	12	125	Variable	3,600	5"	2	Yes	1	—	—	—	Built-In Light	—	54275A62	000000
C	Milwaukee 2953-20	18	166	Variable	3,900	4 1/2"	2.2	No	1	—	—	—	Built-In Light	—	54275A63	000000
C	Milwaukee 2953-22	18	166	Variable	3,900	4 1/2"	3.8	Yes	1	—	—	—	Built-In Light	—	54275A64	000000
C	Milwaukee 2957-20	18	166	4	3,600	4 1/2"	2.3	No	1	—	—	Bluetooth	Built-In Light	—	54275A42	000000
D	Makita DT03R1	12	80.8	1	2,600	6"	2.3	Yes	1	—	—	—	Built-In Light	Outside United States	51455A533	000000
E	Milwaukee 2467-20	12	50	Variable	2,450	11 5/16"	2.1	No	1	—	—	—	Built-In Light	—	54275A418	000000
E	Milwaukee 2667-20	18	56.2	2	2,250	12 1/8"	2.2	No	1	—	—	—	—	—	54275A417	000000


F	Makita XLT01Z	18	44.2	Variable	2,000	15 1/4"	2.5	No	1	—	—	—	Built-In Light	Outside United States	37375A511	000000

Attachments

For Style	Shape	Manufacturer and Model No.	Cannot Be Sold To		Each
A	90° Angle	DeWalt DWARA120	—	53145A111	000000
B, C	90° Angle	Milwaukee 48-32-2390	—	54275A419	00000
F	Straight	Makita 192440-7	Outside United States	37375A21	00000

Air-Powered Torque Screwdrivers

Set torque and the clutch slips when it’s reached, causing the tool to stop turning the fastener. To set torque, turn the adjustment collar or screw and then verify the torque setting with a torque tester.

Note: Air tools require lubrication to operate properly.

Clutch Slip Torque Limiter—in·lbf


Trigger Speed Control	Push-to-Start Speed Control	Lever Speed Control

												Air Inlet
	Max. No-Load Rotational Speed, rpm	Torque Range, in·lbf	No. of Speeds	Max. Torque, in·lbf	Drive Direction	For Bit Hex Shank Size	Overall Lg.	Driver Style	Wt., lb.	Recommended Operating Air Pressure, psi	Average Air Consumption @ Pressure	Pipe Size	Thread Type	Gender	For Air Hose ID		Each
Trigger Speed Control



		800	55 to 100	Variable	100	Clockwise and Counterclockwise	1/4"	9"	Driver	3	90	4 ft³/min @ 90 psi	1/4	NPT	Female	3/8"	5767A59	0000000


		900	13 to 70	Variable	70	Clockwise and Counterclockwise	1/4"	9 1/2"	Driver	2.9	90	17 ft³/min @ 90 psi	1/4	NPT	Female	1/4"	7029A15	000000


		Push-to-Start Speed Control



				1,000	1.5 to 30	1	30	Clockwise and Counterclockwise	1/4"	8 3/4"	Driver	1.1	90	13 ft³/min @ 90 psi	1/8	NPT	Female	1/4"	7029A32	000000


				Lever Speed Control



						1,000	1.5 to 30	Variable	30	Clockwise and Counterclockwise	1/4"	9 1/4"	Driver	1.1	90	13 ft³/min @ 90 psi	1/8	NPT	Female	1/4"	7029A34	000000


						1,800	45 to 70	Variable	70	Clockwise and Counterclockwise	1/4"	9 1/2"	Driver	1.5	90	4 ft³/min @ 90 psi	1/4	NPT	Female	3/8"	5767A51	000000
						2,100	13 to 40	Variable	40	Clockwise and Counterclockwise	1/4"	10"	Driver	2.6	90	16 ft³/min @ 90 psi	1/4	NPT	Female	1/4"	7029A14	000000

Cordless Impact Wrenches

Pistol Grip


Ring Socket Retainer	Pin Socket Retainer

Ring and Hole Socket Retainer

Loosen stuck fasteners and drive in fasteners with high force anywhere on your site. These impact wrenches run on a rechargeable battery, so you don’t need to be near an outlet to use them. Wrenches operate at full torque in the counterclockwise direction. The working torque range applies to the clockwise direction, often used for fastening. Use these wrenches with impact sockets only.

Some wrenches come with batteries and a charger. For others, batteries and chargers are sold separately.

Bluetooth Connection—Wrenches with Bluetooth connection link to a free downloadable app, Milwaukee One-Key. From your smartphone or tablet, you can use the app to track your tool’s location, customize settings, monitor usage, and get notifications for maintenance.

Ring Socket Retainer—Ring-style socket retainers allow quick socket changes—pull the socket off the retainer and push on another one.

Pin Socket Retainer—Pin style socket retainers, also called positive-locking socket retainers, have a pin that fits into a matching hole in the socket. They provide a more secure hold than ring-style retainers.

Ring and Hole Socket Retainer—Ring-and-hole-style socket retainers, also called positive-locking socket retainers, provide a more secure hold than ring-style retainers. These retainers require a retaining ring (included).

Cannot Be Sold To—Wrenches, batteries, and chargers that cannot be sold outside of the United States are restricted due to product regulations.

	Wrenches																Batteries				Chargers
	Mfr. Model No.	Voltage, V DC	Max. Torque, ft·lbf	Working Torque	Grip Style	Max. No-Load Rotational Speed, rpm	Overall Lg.	Wt., lb.	Socket Retainer Style	Motor Type	Batteries Included	Battery Charger Included	Sockets Included	Cannot Be Sold To		Each	Cannot Be Sold To	Pkg. Qty.		Pkg.	Cannot Be Sold To		Each
Milwaukee







				1/4" Square Drive

				3048-20	12	100	0 ft·lbf to 100 ft·lbf	Pistol	3,800	5"	1.5	Ring	Brushless	No	No	—	—	54275A119	0000000	—	1	29735A314	000000	—	4443A22	000000




						3/8" Square Drive

						2562-20	12	400	0 ft·lbf to 400 ft·lbf	Pistol	3,000	4 3/4"	2.2	Ring	Brushless	No	No	—	—	54275A115	000000	—	1	29735A314	00000	—	4443A22	00000


						2562-22	12	400	0 ft·lbf to 400 ft·lbf	Pistol	3,000	4 3/4"	2.2	Ring	Brushless	Yes	Yes	—	—	54275A116	000000	—	1	29735A314	00000	—	4443A22	00000




								3/8" Square Drive—Bluetooth Connection

								2758-20	18	210	0 ft·lbf to 210 ft·lbf	Pistol	2,500	5 7/8"	2.4	Ring	Brushless	No	No	—	—	54275A118	000000	—	1	29735A79	000000	—	29735A128	00000




										1/2" Square Drive

										2962-22R	18	550	0 ft·lbf to 550 ft·lbf	Pistol	2,500	6"	5.1	Ring	Brushless	Yes	Yes	—	—	54275A35	000000	—	1	29735A79	000000	—	29735A128	00000


										2962-22R	18	550	0 ft·lbf to 550 ft·lbf	Pistol	2,500	6"	5.1	Ring	Brushless	Yes	Yes	Standard: 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1 1/16", 1 1/8", 1 1/4"	—	54275A71	000000	—	1	29735A79	000000	—	29735A128	00000
										2967-20	18	1,200	0 ft·lbf to 1,200 ft·lbf	Pistol	2,000	7 1/2"	5.9	Ring	Brushless	No	No	—	—	54275A117	000000	—	1	29735A79	000000	—	29735A128	00000


										Makita







														1/4" Square Drive

														WT04R1	12	40	0 ft·lbf to 40 ft·lbf	Pistol	2,600	6 3/8"	2.2	Ring	Brushed	Yes	Yes	—	Outside United States	51455A112	000000	Outside United States	1	27875A111	00000	Outside United States	27875A112	00000


														WT04Z	12	40	0 ft·lbf to 40 ft·lbf	Pistol	2,600	6 3/8"	2.2	Ring	Brushed	No	No	—	Outside United States	51455A111	000000	Outside United States	1	27875A111	00000	Outside United States	27875A112	00000




																3/8" Square Drive

																XWT16Z	18	220	0 ft·lbf to 220 in·lbf	Pistol	3,200	5 1/2"	4	Ring	Brushless	No	No	—	Outside United States	51455A14	000000	Outside United States	1	27875A27	000000	Outside United States	27875A17	000000




	1/2" Square Drive

	WT03Z																12	100	0 ft·lbf to 100 ft·lbf	Pistol	2,600	6 5/8"	2.3	Pin	Brushed	No	No	—	Outside United States	51455A115	000000	Outside United States	1	27875A111	00000	Outside United States	27875A112	00000




			3/4" Square Drive

			XWT07Z														18	780	0 ft·lbf to 780 ft·lbf	Pistol	1,800	9"	7.6	Ring and Hole	Brushless	No	No	—	Outside United States	51455A13	000000	Outside United States	1	27875A45	000000	Outside United States	27875A17	000000


			DeWalt







																		1/2" Square Drive

																		DCF891P2	20	600	0 ft·lbf to 600 ft·lbf	Pistol	2,000	7"	3.7	Ring	Brushless	Yes	Yes	—	—	6790A33	000000	—	1	29835A115	000000	—	29835A113	000000


						Ingersoll Rand







									3/4" Square Drive

									W8171										20	1,200	0 ft·lbf to 1,200 ft·lbf	Pistol	1,300	8 3/4"	7.4	Ring and Hole	Brushless	No	No	—	—	8500N11	000000	—	1	5483A55	000000	—	5483A54	000000




																				1" Square Drive

																				W8191	20	1,200	0 ft·lbf to 1,200 ft·lbf	Pistol	1,300	8 3/4"	7.4	Ring and Hole	Brushless	No	No	—	—	8500N12	000000	—	1	5483A55	000000	—	5483A54	000000

Electric Torque Screwdrivers

The clutch slips when the set torque is reached to prevent overtightening and damaging fasteners. To set torque, turn the adjustment collar.

Clutch Slip Torque Limiter—in·lbf

Image of Product. Front orientation. Torque Screwdrivers. Electric Torque Screwdrivers .

	No. of Speeds	Max. Torque, in·lbf	Drive Direction	For Bit Hex Shank Size	Overall Lg.	Driver Style	Wt., lb.	Voltage, V AC	Current, amp	Cord Lg., ft.	Certification	Mfr. Model No.		Each
Trigger Speed Control



	1,200	Variable	140	Clockwise and Counterclockwise	1/4"	12"	Driver	3.6	120	6.5	8	CSA Certified, UL Listed	DW267	7415A24	0000000

High-Precision Air-Powered Torque Screwdrivers

The motor shuts off when the set torque is reached to provide the most torque control of any air-powered screwdriver. To set torque, turn the adjustment collar or screw and then verify the torque setting with a torque tester.

Note: Air tools require lubrication to operate properly.

Motor Stop Torque Limiter


Push-to-Start Speed Control	Lever Speed Control, 8 1/4" Overall Lg.	Lever Speed Control, 10 3/4" Overall Lg.

												Air Inlet
	Max. No-Load Rotational Speed, rpm	Torque Range, in·lbf	No. of Speeds	Max. Torque, in·lbf	Drive Direction	For Bit Hex Shank Size	Overall Lg.	Driver Style	Wt., lb.	Recommended Operating Air Pressure, psi	Average Air Consumption @ Pressure	Pipe Size	Thread Type	Gender	For Air Hose ID		Each
Push-to-Start Speed Control



		800	14.1 to 35.2	1	35.2	Clockwise and Counterclockwise	1/4"	8 1/4"	Driver	1.4	85	10.5 ft³/min @ 85 psi	1/4	NPT	Female	1/4"	5925A13	000000000


		1,000	3.1 to 9.7	1	9.7	Clockwise and Counterclockwise	1/4"	7 1/8"	Driver	0.7	85	5.6 ft³/min @ 85 psi	1/8	NPT	Female	1/4"	5925A11	00000000
		1,100	9.7 to 18.5	1	18.5	Clockwise and Counterclockwise	1/4"	7 1/4"	Driver	0.9	85	7 ft³/min @ 85 psi	1/4	NPT	Female	1/4"	5925A12	00000000


		Lever Speed Control



				1,100	3.5 to 18.5	1	18.5	Clockwise and Counterclockwise	1/4"	10 3/4"	Driver	1.5	85	7 ft³/min @ 85 psi	1/4	NPT	Female	1/4"	5925A18	00000000


				1,100	9.7 to 18.5	1	18.5	Clockwise and Counterclockwise	1/4"	8 1/4"	Driver	1.2	85	7 ft³/min @ 85 psi	1/4	NPT	Female	1/4"	5925A14	00000000

Heavy Duty Air-Powered Impact Wrenches


Pistol Grip	D-Handle Grip


Ring Socket Retainer	Hole Socket Retainer

Built to withstand tough environments, these wrenches have steel or titanium housings to protect them if they fall. Use them when you need high force to turn fasteners. To break stuck fasteners free, apply full torque counterclockwise. To drive fasteners, turn them clockwise within the working torque range. These wrenches can only be used with impact sockets. Air-powered tools require lubrication to operate properly.

Ring Socket Retainer—Ring-style socket retainers make it easy to quickly change sockets. Just pull the socket off the retainer and push on another one.

Ring and Hole Socket Retainer—Ring-and-hole style and hole-style socket retainers require a retaining ring (not included).

	Wrenches																			Repair Kits
							Air Inlet
	Max. Torque, ft·lbf	Working Torque, ft·lbf	Grip Style	No. of Speeds	Max. No-Load Rotational Speed, rpm	Average Air Consumption @ Pressure	Pipe Size	Thread Type	Gender	For Air Hose ID	Overall Lg.	Wt., lb.	Housing Material	Socket Retainer Style	Retaining Ring Req.	Features	Includes		Each		Each
1/2" Square Drive



		350	85 to 255	Pistol	1	11,500	34 ft³/min @ 90 psi	1/4	NPT	Female	1/2"	6 7/8"	3.8	Steel	Ring	No	—	—	7174A114	0000000	———	0


		800	135 to 560	Pistol	1	8,400	1.5 ft³/min @ 90 psi	1/4	NPT	Female	1/4"	7 7/8"	5.3	Steel	Ring	No	—	—	7174A115	000000	———	0


		3/4" Square Drive



				1,150	200 to 750	Pistol	1	5,500	9.5 ft³/min @ 90 psi	3/8	NPT	Female	1/2"	8 3/4"	12.5	Steel	Ring and Hole	Yes	—	Socket Retaining Ring	7174A118	000000	———	0


				1,600	400 to 1,400	Pistol	1	5,200	15 ft³/min @ 90 psi	3/8	NPT	Female	1/2"	8 7/8"	11.9	Titanium	Hole	Yes	—	Socket Retaining Ring	7174A55	00000000	7174A112	0000000


				1" Square Drive



						1,200	200 to 810	Pistol	1	5,500	9.5 ft³/min @ 90 psi	3/8	NPT	Female	1/2"	8 3/4"	13	Steel	Ring and Hole	Yes	—	Socket Retaining Ring	7174A117	000000	———	0


						1,450	350 to 1,100	Pistol	1	5,200	6 ft³/min @ 90 psi	1/2	NPT	Female	1/2"	8 7/8"	11.4	Titanium	Hole	Yes	—	Socket Retaining Ring	7174A13	00000000	7174A112	000000


						1 1/2" Square Drive



								3,600	600 to 2,000	D-Handle	1	3,500	15 ft³/min @ 90 psi	1/2	NPT	Female	3/4"	16 1/2"	34.5	Steel	Hole	Yes	Adjustable Side Handle	Socket Retaining Ring	57855A42	00000000	———	0

High-Precision Electric Torque Screwdrivers

The motor shuts off when the set torque is reached to prevent overtightening and damaging fasteners. These tools provide the most torque control of any electric screwdriver. They are designed for light- to medium-volume assembly.

Motor Stop Torque Limiter


Push-to-Start Speed Control	Lever Speed Control

	Torque Range, in·lbf	No. of Speeds	Max. Torque, in·lbf	Drive Direction	For Bit Hex Shank Size	Overall Lg.	Driver Style	Wt., lb.	Voltage, V AC	Current, amp	Cord Lg., ft.	Duty Cycle	On/Off Time		Each
Push-to-Start Speed Control



	1,200	12 to 24	1	24	Clockwise and Counterclockwise	1/4"	10"	Driver	1.5	120	0.45	10	Intermittent	0.5 Seconds On, 3.5 Seconds Off	5809A24	0000000


	2,000	4.4 to 16	1	16	Clockwise and Counterclockwise	1/4"	10"	Driver	1.5	120	0.45	10	Intermittent	0.5 Seconds On, 3.5 Seconds Off	5809A23	000000


	Lever Speed Control



			2,000	4.4 to 16	1	16	Clockwise and Counterclockwise	1/4"	10"	Driver	1.5	120	0.45	10	Intermittent	0.5 Seconds On, 3.5 Seconds Off	5809A21	000000

Battery-Powered Pistol-Grip Drivers for Threaded Plug Gauges

Test thread tolerance in seconds. A time-saver for high-volume work, these drivers quickly thread gauges in and out of holes for you—just pull the trigger. A green ring lights up to let you know your internal threads are within tolerance. If they're not, the gauge won't thread in fully. To avoid jamming, these drivers reverse gauges out of holes as powerfully as they thread them in. The pistol grip minimizes hand fatigue during long periods of use.

These drivers have two speeds to suit the job you need. The high speed works for most applications, while the lower speed is ideal for your largest thread sizes, or when you need more torque. Fine-tune torque even further with the included torque adjustment tool. These drivers come with two batteries, so you’ll never be attached to a cord or without power. Use one battery while charging the other.

For Plug Ga. Thread Dia.	Max. No-Load Rotational Speed, rpm	Max. Torque, ft·lbf	No. of Speeds	Voltage, V DC	Batteries Included	Battery Charger Included	Overall Lg.	Wt., lb.	Features	Includes		Each
No. 0, No. 1, No. 2, No. 4, No. 5, No. 6, No. 8, No. 10, No. 12, 1/4", 5/16", 3/8", 7/16", 1/2", M3, M3.5, M4, M5, M6, M7, M8, M9, M10, M11, M12	1,550	1.47	2	14.4	Yes	Yes	8"	2.5	Go-Indicating Light	Torque Adjustment Tool, Two Rechargeable Lithium Ion Batteries	7876N11	000000000

Accessories and Replacements for Plug Gauge Drivers

Thread Adapters

Get started by placing your threaded plug gauge in a thread adapter, then insert the adapter into the driver’s chuck. The adapter quickly attaches and detaches from the chuck to easily swap out different sizes of threaded plug gauges.

For Plug Ga. Thread Dia.		Each
No. 4, No. 5, No. 6, M3, M3.5	7876N12	0000000
No. 8, No. 10, No. 12, M4, M5	7876N13	000000
1/4", 5/16", M6, M7, M8, M9	7876N14	000000
3/8", 7/16", 1/2", M10, M11, M12	7876N15	000000

	Battery Type	Battery Voltage, V DC	Battery Charging Time, min.
Lithium Ion (Li-Ion) Battery


Rechargeable	14.4	70	7876N16	0000000

Replacement Chargers

Image of Product. Front orientation. Battery Chargers. Battery-Powered Pistol-Grip Drivers for Threaded Plug Gauges.

					Electrical
	For Battery Voltage, V DC	For No. of Batteries	Input Voltage, V AC	Charging Time, min.	Connection	No. of Blades	Cord Lg., ft.		Each
For Lithium Ion (Li-Ion) Batteries



		14.4	1	100, 240	70	Straight Blade	2	6 1/2	7876N17	0000000

Air-Powered Torque Wrenches

Faster than manual torque wrenches, these run on air to turn fasteners quickly. Also known as nutrunners, they secure screws and nuts without the risk of overtightening. Set your desired torque and the wrench signals when it’s reached by stalling the motor or disengaging the clutch.

Use with impact sockets only. Air-powered tools require lubrication to operate properly.

Straight Grip

These wrenches have a pin-style socket retainer. The pin fits into a matching hole in the socket.

						Air Inlet
	Square Drive Size	Torque	Torque-Limiting Mechanism	Max. No-Load Rotational Speed, rpm	Average Air Consumption @ Pressure	Pipe Size	Thread Type	Wt., lb.		Each
Nonratcheting







				in·lbf

				1/4"	35.4 in·lbf to 102.3 in·lbf	Motor Stall	500	17 ft³/min @ 90 psi	1/4	NPT	1.5	1132A12	000000000




						ft·lbf

						3/8"	1.25 ft·lbf to 9.16 ft·lbf	Clutch Disengage	600	16 ft³/min @ 90 psi	1/4	NPT	3.4	1132A1	00000000


						1/2"	18.4 ft·lbf to 40.6 ft·lbf	Clutch Disengage	425	50 ft³/min @ 90 psi	3/8	NPT	5.4	1132A41	00000000

Pistol Grip


Pistol Grip Shown in Use with Shock Absorber

These wrenches have a hole-style socket retainer that requires a retaining ring. All include a shock absorber you position against a nearby stationary object to prevent wrench kickback once the fastener is tightened. They also come with a calibration certificate.

	Wrenches											Replacement Torque Wrench Shock Absorbers
			Accuracy
	Square Drive Size	Torque	Clockwise	Counterclockwise	Torque-Limiting Mechanism	Max. No-Load Rotational Speed, rpm	Average Air Consumption @ Pressure	Wt., lb.	Certificate Type		Each		Each
Nonratcheting







				ft·lbf

				3/4"	118 ft·lbf to 590 ft·lbf	±3%	±3%	Motor Stall	25	44 ft³/min @ 90 psi	9.3	Calibration Certificate with Test Data Traceable to UKAS	1132A31	000000000	1132A301	0000000


				1"	158 ft·lbf to 1,051 ft·lbf	±5%	—	Motor Stall	15	52 ft³/min @ 70 psi	12	Calibration Certificate Traceable to NIST	1132A51	00000000	6686N411	000000

Air-Powered Impact Drivers

Connect these tools to your shop air. They deliver powerful rotational blows to maximize torque and drive screws quickly, even through thick or dense material.

Note: Air tools require lubrication to operate properly.

										Air Inlet
	No. of Speeds	Max. No-Load Rotational Speed, rpm	Torque Range, in·lbf	Drive Direction	For Bit Hex Shank Size	Overall Lg.	Wt., lb.	Recommended Operating Air Pressure, psi	Average Air Consumption @ Pressure	Pipe Size	Thread Type	Gender	For Air Hose ID		Each
Pistol Grip







				Measures in·lbf

				Variable	10,000	120 to 840	Clockwise and Counterclockwise	1/4"	6 5/16"	2.1	90	2 ft³/min @ 90 psi	1/4	NPT	Female	3/8"	2869N11	0000000

Cordless Screwdrivers


DeWalt Pistol Grip	Milwaukee Pistol Grip	Milwaukee Multiposition Grip

Power through tasks that would be tedious with a manual driver. These screwdrivers tighten and loosen screws quickly and with minimal effort. They're ideal for repair shops and other high-volume jobs where efficiency is key. Charge the batteries to work in remote areas without power.

Pistol Grip—The angled handle keeps your wrist in a comfortable, natural position, reducing fatigue during lengthy projects.

Multiposition Grip—Use the pistol grip to drive screws horizontally and the straight grip to drive vertically. Screwdrivers with a straight grip squeeze into tight places, such as inside cabinets or engine compartments.

	Screwdrivers												Replacement Batteries			Replacement Chargers
							Battery
	No. of Speeds	Max. No-Load Speed, rpm	For Bit Hex Shank Size	Mfr.	Mfr. Model No.	Wt., lb.	Voltage, V DC	Chemistry	Included	Battery Charger Included		Each	Pkg. Qty.		Pkg.		Each
Pistol Grip



		Variable	500	1/4"	Milwaukee	2401-22	2.3	12	Lithium Ion (Li-Ion)	Yes	Yes	4443A11	0000000	1	29735A314	000000	4443A22	000000


		Variable	1,000	1/4"	DeWalt	DCF610S2	2.2	12	Lithium Ion (Li-Ion)	Yes	Yes	6978A71	000000	1	6978A72	000000	29835A113	000000


		Multiposition Grip



				2	200, 600	1/4"	Milwaukee	2101-22	1.3	4	Lithium Ion (Li-Ion)	Yes	Yes	7183A45	000000	1	7183A47	00000	7183A46	00000

Electric Impact Wrenches


Style A	Style B

Pin Socket

Retainer

Ring and Hole

Socket Retainer

Use these wrenches with impact sockets only.

Pin Socket Retainer—Pin style socket retainers (also called positive locking) provide a more secure hold than ring-style retainers. The retainer has a pin that fits into a matching hole in the socket.

Ring and Hole Socket Retainer—Ring-and-hole style socket retainers (also called positive locking) provide a more secure hold than ring-style retainers. They require a retaining ring (included).

Cannot Be Sold To—Wrenches that cannot be sold to the listed areas are restricted due to product regulations.

	Manufacturer and Model Number	Max. Torque, ft·lbf	No. of Speeds	Max. No-Load Rotational Speed, rpm	Overall Lg.	Wt., lb.	Voltage, V AC	Current, amp	Freq., Hz	Socket Retainer Style	Cord Lg., ft.	Certification	Cannot Be Sold To		Each
1/2" Square Drive



	A	Makita TW0350	260	Variable	2,000	11 1/8"	6.4	120	3.5	60	Pin	8	—	Outside United States	57755A66	0000000


	3/4" Square Drive



			B	Milwaukee 9075-20	380	1	1,800	11 5/8"	6.2	120	7	60	Ring and Hole	8	UL Listed	—	7184A33	000000

Air-Powered Screwdrivers

Connect these tools to your shop air to quickly install and remove fasteners. With fewer moving parts than battery-powered screwdrivers, these are less likely to overheat when used continuously. They also operate at higher speeds than battery-powered screwdrivers, so they're great for production lines and other high-volume jobs when you're on a time crunch.

Pistol Grip—The angled handle keeps your wrist in a comfortable, natural position, reducing fatigue during lengthy projects.

Direct Drive—These screwdrivers will spin as long as you press the trigger. They don't have any built-in mechanism for preventing overtightening or limiting torque, so they're best for jobs where speed matters more than precision. You don't have to push on the screw to turn the bit, so they're often used to fasten compressible materials.

Positive-Clutch Drive—Designed to prevent overtightening, these screwdrivers are best for jobs that require consistent torque, such as electronics. Pull the trigger and push on the screw to start turning the bit. They'll stop automatically when they reach the max torque.

						Air Inlet
	No. of Speeds	Max. No-Load Speed, rpm	For Bit Hex Shank Size	Recommended Operating Air Pressure, psi	Average Air Consumption @ Pressure	Pipe Size	Thread Type	Gender	For Air Hose ID	Wt., lb.		Each
Pistol Grip







				Direct Drive

				1	2,200	1/4"	90	2.5 ft³/min @ 90 psi	1/4	NPT	Female	3/8"	2.3	5767A78	0000000


				Variable	1,800	1/4"	90	4 ft³/min @ 90 psi	1/4	NPT	Female	3/8"	2.3	57555A21	000000




						Positive-Clutch Drive

						Variable	1,800	1/4"	90	4 ft³/min @ 90 psi	1/4	NPT	Female	3/8"	2.9	57485A11	000000

Dual-Drive Cordless Impact Wrenches


	Dual-Drive and Ring-Style Socket Retainer

Switch between sockets and bits with these two-in-one tools to drive different types of fasteners with high force. Their versatility makes them ideal for use in the field for construction work and maintenance on heavy equipment. Socket changes are quick, thanks to the ring-style socket retainer—pull the socket off and push another one on. You won’t need to plug into a power source, since these wrenches run on a rechargeable battery. They connect via Bluetooth to a free downloadable app, Bosch Toolbox. From your tablet or smartphone, you can track your tool, customize settings, monitor usage, and get alerts for preventative maintenance.

Wrenches operate at full torque in the counterclockwise direction, which is most commonly used to break stuck fasteners free. The working torque range applies to the clockwise direction, which is commonly used for fastening. Use these tools with impact sockets and bits only.

	Wrenches													Batteries		Chargers
	Manufacturer and Model Number	Voltage, V DC	Max. Torque, ft·lbf	Max. Working Torque, ft·lbf	Max. No-Load Rotational Speed, rpm	Overall Lg.	Motor Type	Wt., lb.	Batteries Included	Battery Charger Included	Features		Each		Each		Each
1/2" Square Drive, 1/4" Hex Socket Size



		Bosch GDX18V-1860CB15	18	155	155	3,400	8"	Brushless	2.6	Yes	Yes	Built-In Light	8065N11	0000000	2254N17	0000000	2263N22	000000

Depth-Limiting Cordless Screwdrivers

Adjust the nosepiece on these screwdrivers to stop screws from sinking too deep. They're perfect for wood, fiberboard, drywall, and other soft materials that may crack if you overdrive the fastener. Power screwdrivers tighten and loosen screws quickly to tackle tasks that would be tedious with a manual driver. Charge the batteries to work in remote areas without power.

Pistol Grip—The angled handle keeps your wrist in a comfortable, natural position, reducing fatigue during lengthy projects.

	Screwdrivers												Replacement Batteries		Replacement Chargers
							Battery
	No. of Speeds	Max. No-Load Speed, rpm	For Bit Hex Shank Size	Mfr.	Mfr. Model No.	Wt., lb.	Voltage, V DC	Chemistry	Included	Battery Charger Included		Each		Each		Each
Pistol Grip



		Variable	4,800	1/4"	DeWalt	DCF630D2	2.2	20	Lithium Ion (Li-Ion)	Yes	Yes	5687A71	0000000	29835A4	0000000	29835A113	0000000

Impact Wrench VersaDrive Chucks

Harness the torque of your impact wrench to cut and prepare holes faster than any other method. The ball detents inside these chucks tightly grip any tool with a VersaDrive hex shank—from drill bits to taps to reamers—so just one chuck and wrench can handle any cutting task. Made of hardened steel, these chucks withstand repeated hammering without deforming. Mount them to your impact wrench’s square drive.

Because these chucks are designed specifically for impact wrenches, you can take full advantage of what that tool does best. The high torque and rapid hammering keep cutting tools moving forward for smooth, continuous cutting. Those rapid blows also help break and clear chips as you cut, so you don’t need to pause, even in large holes and tough materials. Since the wrench absorbs kickback, it won’t fight you when a cutting tool snags, reducing wrist strain and fatigue over long jobs.

Quick-Change Pull-Back Tool Release

Require just one hand to load. Push your tool in the chuck until you hear the ball detents click into place. To remove your tool, pull back the collar.

	For Shank
For Square Drive Size	Type	Size	Overall Lg.	Material	Includes		Each
1/2"	VersaDrive Hex	7/16"	2 5/32"	Black-Oxide Steel	Retaining Ring, Retention Pin	9589N112	000000

Strong-Hold Push-Forward Tool Release

Hold cutting tools more securely than quick-change chucks. To insert and remove cutting tools, you must push a collar forward. Since impact force drives your cutting tool the opposite way, it can’t come loose from the chuck while you work.

Manganese Phosphate-Coated Steel—The coating on these chucks prevents rust.

	For Shank
For Square Drive Size	Type	Size	Overall Lg.	Material	Includes		Each
3/8"	VersaDrive Hex	7/16"	2"	Manganese Phosphate-Coated Steel	Retaining Ring, Retention Pin	9589N111	0000000
1/2"	VersaDrive Hex	7/16"	2 5/32"	Manganese Phosphate-Coated Steel	Retaining Ring, Retention Pin	9589N113	000000
3/4"	VersaDrive Hex	7/16"	2 3/8"	Manganese Phosphate-Coated Steel	Retaining Ring, Retention Pin	9589N114	000000

Optional Extensions


Quick-Change Pull-Back Tool Release	Quick-Change Pull-Back Tool Release

Extend your cutting tool’s reach. These extensions attach to your chuck and accept any tool with a VersaDrive hex shank.

		For Shank		Shank
	Overall Lg.	Type	Size	Type	Size	OD	Material		Each
Quick-Change Pull-Back Tool Release



		5"	VersaDrive Hex	7/16"	VersaDrive Hex	7/16"	1 7/64"	Black-Oxide Steel	9589N115	000000


		12"	VersaDrive Hex	7/16"	VersaDrive Hex	7/16"	1 7/64"	Black-Oxide Steel	9589N116	00000

Hydraulic Torque Wrenches

Take the strain out of tough, repetitive fastening jobs. These hydraulic wrenches deliver high-powered torque to quickly and safely secure nuts and bolts—without the risk of overtightening. Set your desired torque and the wrench signals when it’s reached with an audible click and by stalling the motor. All come with a calibration certificate, which includes test measurements that confirm accuracy.

Only for use with impact sockets, these wrenches have a hole-style retainer that requires a retaining ring to hold them firmly in place. Position the shock absorber against a nearby stationary object to prevent the wrench from kicking back once your fastener is tightened.

			Accuracy			Inlet			Outlet
	Square Drive Size	Torque	Clockwise	Counterclockwise	Torque-Limiting Mechanism	Quick-Disconnect Style	Coupling Size	Gender	Quick-Disconnect Style	Coupling Size	Gender	For Hose ID	Includes	Certificate Type		Each
Ratcheting







				ft·lbf

				3/4"	163 ft·lbf to 1,444 ft·lbf	±3%	±3%	Motor Stall	ISO Minimal-Spill	1/4	Male	ISO Minimal-Spill	1/4	Female	1/4"	Shock Absorber	Calibration Certificate with Test Data Traceable to NIST	6591N1	000000000