The lightweight plastic construction makes these blowguns more comfortable to hold than metal.

The rubber tip won't damage parts.

Also known as air-shield and safety-shield blowguns, a center airstream blows away debris while an outer air curtain deflects flying chips and dust.

Connect the included hose to your air supply and these blowguns are ready to use.

The included hose is ready to connect to your air supply.

These guns include a rubber tip that won't damage your workpiece.

Designed to reduce noise, these blowguns are quieter than similar standard guns.

Maximize comfort and minimize strain with these lightweight guns.

The extra length lets you access hard-to-reach areas.

Blow air backward from the nozzle to clean out the inside of pipes, tubes, and channels without pushing debris into your system.

The flat nozzle distributes air over a wide area.

Blow off dust and contamination, eliminate static charges, and guard against ESD (electrostatic discharge).

These guns provide more than three times the airflow of standard static-eliminating blowguns.

Safely blow dust and debris off your clothes. These blowers are a safer alternative to compressed air and help you meet OSHA regulations.

These durable wash guns are typically used for frequent washdowns and cleanup.

Connect these guns to your garden hose and automatically dispense solution from the attached bottle instead of dragging around a siphon hose.

Use as either a vacuum or a blower—change the airflow direction to switch functions. Use to clean up dirt, dust, metal chips, and glass.

These vacuum cleaners work well for cleaning machinery and workstations.

No funnel needed to fill these bottles—a wide mouth allows quick refilling without spilling.

Spray liquids around your food processing plant while reducing the risk of contaminating the food. These spray bottles have metal additives in the spray head and on the label that can be picked up by a metal detector if the bottles—or any piece of the spray head or label—fall into your line.

Unlike standard spray bottles, these dispense oil and other high-viscosity liquids without clogging.

Spray at any angle—even upside down.

Wheel these electric-powered sprayers wherever needed to disinfect surfaces and equipment in bathrooms, schools, gyms, and worksites without any manual pumping.

An electrostatic charging ring in these backpack sprayers gives spraying liquids a positive charge, so that disinfectant or insecticide will cling to surfaces for an even coating.

These sprayers have a more durable construction than our other plastic hand-pump sprayers.

A rechargeable battery keeps these sprayers pressurized, so you don’t have to stop to pump while spraying herbicides, insecticides, disinfectants, cleaners, and other solutions.

Pump the handle to pressurize the tank, then squeeze the trigger on the wand to spray. These sprayers are often used for degreasers, insecticides, disinfectants, cleaning solutions, and herbicides.

These sprayers are small enough to use with one hand.

Power without a cord means you can take these sealant-dispensing guns wherever you need them.

Let compressed air do the work for you when dispensing sealants from cartridges.

Dispense sealants from cartridges with ease and control.

Minimize mess and waste—when you release the handle on these guns, the rod retracts a bit to stop flow automatically.

Be sure you’re using the right grease—this gun has a clear barrel for identification at a glance.

These guns deliver twice as much grease per stroke than standard lever-grip guns.

Dispense small amounts of grease with this compact gun.

Use compressed air to dispense grease.

Be sure you’re using the right grease—this gun has a clear barrel for identification at a glance.

Switch between high-pressure and low-pressure settings. Use high pressure to dispense thicker grease or to force grease through clogged fittings. Use low pressure for high-volume dispensing.

Dispense small amounts of grease with one of these compact guns.

Press the trigger to slide the clamping arm along the bar. Release the trigger and squeeze the pistol-grip handle to lock the clamp in place.

Increase the pressure of your grease system when necessary to dispense thick grease and force grease through clogged fittings.

A display allows you to monitor how much grease is dispensed.

This dispenser delivers over three times more grease per stroke than our dual-output dispensers.

Deliver a mist of oil using shop air.

Pull the trigger on these oilers for easier one-hand operation than standard hand-held oil dispensers.

These dispensers have an opening for filling without removing the nozzle.

For a more secure connection than standard trigger-locking snaps, squeeze the trigger and slide the latch grip down to release.

Only for use with 3M dual cartridges, these guns dispense two-part adhesives.

Use these guns to dispense two-part adhesives. Do not use them with 3M dual cartridges.

Similar to a caulk gun, these guns are good for small jobs.

Use these guns in heat-sensitive applications and on delicate materials. They have a temperature setting of 250° F.

Melt and dispense hot-melt glue sticks for sealing and assembling.

These guns use polyurethane hot-melt cartridges for stronger bonds than other hot-melt adhesives.

For use in high-volume production applications, these guns use electric heat to melt the adhesive and compressed air to keep it flowing.

Dispense up to 3 times as much adhesive per hour as our standard hot-melt glue guns.

Kits include a gun, tips for a variety of applications, solder, and a wrench.

These tight-hold latches are IP65 and NEMA 4 rated for protection against dust, dirt, and washdowns. Press the button and the handle snaps open; push the handle shut for a secure hold.

Press the button and the handle snaps open; push the handle shut for a secure hold.

Rated for steam pressures up to 100 psi @ 400° F, these valves have PTFE seats for excellent temperature resistance. They bolt to flanges to adjust and regulate flow in flanged pipelines.

These valves meet NSF/ANSI 61 for use with drinking water. They bolt to flanges to adjust and regulate flow in flanged pipelines.

Upgrade industry standard flanged gate and globe valves for quicker flow-adjustment capabilities—these have the same end-to-end length as valves of the same pipe size to swap out easily. They’re rated for use with water, oil, air, and inert gas. All bolt to flanges to adjust and regulate flow in flanged pipelines.

Metal provides more durability than plastic. With seats that can stand up to aggressive and corrosive solutions, these valves are often used in chemical-processing applications. They bolt to flanges to adjust and regulate flow in flanged pipelines.