These seals have a solid bulb.

Able to withstand temperatures up to 500° F, these all-rubber silicone seals resist water and salts.

The Buna-N foam rubber bulb on these seals also resists grease, salts, water, steam, and most detergents.

These seals have an EPDM foam rubber wiper, which is softer and more flexible than EPDM rubber wipers.

Seal stationary windows into place with these EPDM seals. EPDM resists water, sunlight, and ozone.

Push these T-seals into grooves and channels to block out moisture, dust, and debris.

These seals are made of solid EPDM foam rubber.

Made of vinyl rubber, these seals also resist salts and detergents. Hollow construction provides compressibility.

It’s the hollow construction that makes these seals more compressible than solid seals. Made of silicone foam rubber, they also resist water and salts.

Tested in accordance with UL and NFPA standards, these silicone rubber seals are for use on fire-rated doors.

These solid silicone rubber seals also stand up to water and salts.

Hollow construction makes these seals more compressible than solid seals.

These hollow seals offer better compressibility than solid seals.

Hollow construction on these vinyl rubber seals provides better compressibility than seals with a foam core. They also resist salts and detergents.

Softer and more flexible than EPDM rubber seals, these EPDM foam rubber seals will effortlessly conform to uneven surfaces.

A ceramic cover makes these seals more chemical resistant than the seals with a silica cover. They resist acids (except hydrofluoric and phosphoric), diluted alkalies, most refrigerants, salts, and grease. Seals can withstand temperatures up to 1700° F.

The PTFE coating on these fiberglass seals is slippery, so they are easier than the other seals to press fit into oven, furnace, and boiler doors. These seals resist steam, most refrigerants, salts, and grease. They can withstand temperatures up to 500° F.

Made of fiberglass, these seals are woven tighter than High-Temperature Ultra-Conformable Slotted Edge Seals for increased durability. They resist grease, oil, hydraulic fluid, and solvents and can withstand temperatures up to 1000° F.

The flat edges on these square-profile seals provide more sealing surface than round-profile seals. They’re made of 98% silica to resist temperatures up to 2300° F.

A tighter braid makes these fiberglass seals more durable than High-Temperature Ultra-Conformable Rope Edge Seals.

Made from tightly woven calcium alumina silicate, these seals can handle temperatures from –300° to 1100° F.

A metal core adds strength and stability, making this trim more durable than standard rubber trim. Made of rubber, it resists abrasion better than plastic trim. Use it to protect the edges of panels, boards, signs, and mirrors from impact.

This trim withstands temperatures up to 450° F, which is generally twice as high as our standard rubber trim. Use it to protect the edges of panels, boards, and signs from impact. Made of rubber, it resists abrasion better than plastic trim.

Guard the edges of panels, signs, glass, and other surfaces in food plants from frequent bumps and scrapes. This trim is FDA compliant, so it’s safe to directly touch food.

Select this plastic trim for its chemical resistance. Often used on panels, boards, signs, and mirrors, it protects edges from impact.

This trim withstands temperatures up to 500° F, which is generally twice as high as our other slippery trim. With a slippery surface, it minimizes friction between parts and is often used on conveyor rails, chutes, and guides. Made of plastic, it's also chemical resistant.

This trim meets FMVSS-302 for Federal Motor Vehicle Safety Standards for flammability, UL 94 HB flame requirements, and NFPA 1971 (National Fire Protection Agency) standards. Made of plastic, it's also chemical resistant. Use it to protect the edges of panels, boards, and signs from impact.

With a surface resistivity of 10 ⁵ ohms this trim safeguards equipment from static electricity by diverting electrostatic charges quickly. Made of plastic, it's also chemical resistant. Use it to protect the edges of of electronics equipment and circuit boards from impact.

Black and yellow stripes create a visual alert to draw attention to equipment and obstructions. Designed to cushion during impact, this foam trim protects edges on posts, shelving, and other surfaces from damage.

This nylon-coated stainless steel trim combines strength with flexibility to hold snugly on flat, round, and irregular-shaped edges. It can also protect wire, cable, and hose.

Cushioning on the top provides added protection from impact. This nylon-coated stainless steel trim combines strength with flexibility for a snug hold. It can also protect wire, cable, and hose.

Protect walls and other surfaces from impact.

Vibrant colors create a visual alert to draw attention to equipment and obstructions. These guards protect corners on walls, posts, shelving, and other surfaces from damage.

Even in the dark, these black and yellow striped guards draw attention to equipment and obstructions. They protect corners on walls, posts, shelving, and other surfaces from damage.

Commonly used in offices, hospitals, and schools, these guards protect corners on walls and other surfaces from impact.

The guards in this system have a metal core for added strength and stability. Combine corner guards and surface guards to create a system that protects walls and equipment from impact and wear. Often used in warehouse and manufacturing areas, these systems protect against damage from carts and vehicles.

Reinforce the edge of a door to guard it against damage from foot traffic and equipment. These plates can also be used to salvage rusted, rotted, or otherwise damaged doors.

In addition to protecting the bottom of a wall from damage, these bases create a finished look where the wall meets the floor. They're commonly used in offices, hospitals, and schools.

Often used to protect sheet metal during fiber and CO2 laser cutting, this film is also good for other fabrication processes such as bending, stamping, and forming. You can even leave this film on finished parts for protection against damage during shipping and storage.

With its reflective, mirror-like finish, this film is often used to repair or create new decorative finishes on edge trim, panels, and other flat surfaces.

Made of woven polyethylene fabric, this is the most puncture-, abrasion-, and tear-resistant surface protection we offer. Commonly used on heavy equipment, it guards metal, plastic, composite, and painted surfaces from damage. It can also be used as a protective layer beneath other materials.

Mount this weatherstripping to the sides and top of a door frame to seal gaps.

A dense seal helps control noise.

No need to drill mounting holes, this weatherstripping has a peel-and-stick adhesive backing.

Avoid scuffing your floor and reduce wear on your seals—this weatherstripping has a plunger that lowers the seal as the door is closed and raises it as the door is opened.

A drip guard diverts rain and snow away from the bottom of the door.

Wrap this weatherstripping around the bottom of a door to seal gaps.

Sets include six pieces of weatherstripping for an overhead door—two for the top and four for the sides to seal gaps.

After installation, the seal projection can be adjusted with a screwdriver to ensure a tight fit.

To provide more protection from the elements than dock door seals, these shelters wrap around trailers.

The threshold height can be adjusted to ensure a tight fit under a door.

An antislip coating adds another layer of slip resistance to these thresholds.

The middle of these three-piece thresholds can be installed smooth or ribbed side up for more slip resistance.

Very soft and conformable, this expanded PTFE gasket tape compresses into an extremely thin profile. Use it to create a leak-resistant seal in tight-tolerance applications, such as on precision machinery.

Make temporary waterproof seals that peel off when no longer needed.

Mix a small amount of water-based paint with this caulk to match the color of your surface.

These sealants include a material certificate with traceable lot number, test report, and product shelf life.

With chemical and metal additives that are picked up by X-ray machines and metal detectors, these sealants are designed to help you comply with Hazard Analysis and Critical Control Point (HACCP) programs in food-processing facilities.

This sealant includes a material certificate with traceable lot number, test report, and product shelf life.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Clear enough to read through, this UV-resistant sealant allows optimal light transmission for use with solar cells and fiber optics.

Thinner than non-sagging sealants, this sealant flows easily into cracks and has a smooth finish.

Also known as neutral-cure sealants, these won't discolor copper, brass, and concrete.

Clear enough to read through, these UV-resistant sealants allow optimal light transmission for use with solar cells and fiber optics.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

Make tough, flexible, oil-resistant seals.

Impervious to the swelling effects of oil, fuel, and solvents, use these high-strength sealants to assemble and repair fuel systems and tanks.

These sealants are marine grade, so they stand up to water, corrosion from salt spray, mildew, and UV light.