10mm Tube OD Tube End Caps

Filter by

Fitting Type

Gender

System of Measurement

Cap Type

Material

Shape

For Use With

Fitting Connection

Maximum Pressure @ Temperature

Tube Material

Specifications Met

Color

For Tube Wall Thickness

0.5 mm

1 mm

Not Rated

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Number of Pieces

Fabrication

Seamless

Welded

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

Minimum Temperature

REACH

RoHS

Compliant with Exemptions

Maximum Temperature

Release Ring Color

Length

30 Products

About Measuring Fittings

Measure the threaded ends of your fittings to identify their pipe size, thread size, schedule, and thread type. Then, find compatible components.

Yor-Lok Fittings for Stainless Steel Tubing

A nut with two sleeves (ferrules) gives these fittings extra gripping power. The sleeves bite into tubing as you tighten the nut, creating a strong seal. Also known as instrumentation fittings, they are made to tight tolerances for use in high-precision applications. They are compatible with Swagelok®, Let-Lok, and A-Lok fittings.

316 stainless steel fittings have excellent corrosion resistance.

Caps

Cap For Tubing

Cap For Fitting

For Use With: Air, Cutting Oil, Fuel Oil, Gasoline, Hydraulic Fluid, Mineral Oil, Natural Gas, Steam, Water
Tubing: Use with welded or seamless 304/304L or 316/316L stainless steel that meets ASTM A213, ASTM A249, or ASTM A269

Caps for tubing have a nut and a sleeve so you can close off the end of your tubing in place of a fitting. Caps for fittings replace the nut and sleeve of an existing fitting.

For Tube
OD	Wall Thick.	Material	Max. Pressure	Temp. Range, °F		Each
For Tubing
10mm	0.5mm	316 Stainless Steel	2,500 psi @ 72° F	-420° to 1200°	5305K164	000000
For Fitting
10mm	0.5mm	316 Stainless Steel	2,500 psi @ 72° F	-420° to 1200°	5305K154	00000

Nuts

Use these nuts with Yor-Lok sleeves and fittings to create an extra-strong seal on stainless steel tubing. They are 316 stainless steel for excellent corrosion resistance.

For Tube
OD	Wall Thick.	Nut Material	Max. Pressure	Temp. Range, °F		Each
10mm	0.5mm	316 Stainless Steel	2,500 psi @ 72° F	-420° to 1200°	5305K144	00000

Front and Back Sleeves

Sleeves

Couple these sleeves with Yor-Lok nuts and fittings to create an extra-strong seal on stainless steel tubing. Sleeves are 316 stainless steel for excellent corrosion resistance. They are also known as ferrules.

For Tube			Front Sleeve		Back Sleeve
OD	Wall Thick.	Sleeve Material	Lg.	No. Included	Lg.	No. Included	Max. Pressure		Each
Sleeves
10mm	0.5mm	316 Stainless Steel	5mm	1	3mm	1	2,500 psi @ 72° F	5305K798	00000

Sleeve and Nut Sets

Save time installing sleeves and nuts—these sets come oriented in the correct direction and order on a dispenser. To install them, slide off a set and place it on your tubing. Each front sleeve, back sleeve, and nut is made of 316 stainless steel for excellent corrosion resistance. Five sets of sleeves and nuts come on each dispenser. Sleeves are also known as ferrules.

For Tube			Front Sleeve		Back Sleeve		Nut
OD	Wall Thick.	Material	Lg.	No. Included	Lg.	No. Included	Lg.	No. Included	Max. Pressure		Each
Sets with Dispenser
10mm	1mm	316 Stainless Steel	5mm	5	3mm	5	15mm	5	2,500 psi @ 72° F	7195N26	000000

Tube Supports

Barbed

Tube supports are recommended for soft plastic tubing to prevent the tube from collapsing.

For Tube
OD	ID	Tube Support Material	Tube Support Style	Temp. Range, °F		Each
10mm	8mm	316 Stainless Steel	Barbed	-420° to 1200°	5305K104	00000
12mm	10mm	316 Stainless Steel	Barbed	-420° to 1200°	5305K106	00000

Solder-Connect Fittings for Copper Tubing

Temperature Range: 32° to 200° F

Caps

For Use With: Drinking Water
Tubing: See table
Specifications Met: See table

Fittings that meet ASTM B379 comply with international standards for tube fitting specifications.

For Tube OD	Material	Max. Pressure	For Copper Tube Type	Specifications Met		Each
10mm	Copper	800 psi @ 72° F	M	ASTM B379, DVGW GW 8, EN 1057	3948N291	00000

Yor-Lok Fittings for Copper Tubing

For Use With: Air, Cutting Oil, Diesel Fuel, Fuel Oil, Gasoline, Hydraulic Fluid, Mineral Oil, Water
Temperature Range: -40° to 400° F
Tubing: Use with seamless copper
Specifications Met: ASME B31.3

A nut with two sleeves (ferrules) gives these fittings extra gripping power. The sleeves bite into tubing as you tighten the nut, creating a strong seal. Also known as instrumentation fittings, they are made to tight tolerances for use in high-precision applications. Fittings are brass for good corrosion resistance. They are compatible with Swagelok®, Let-Lok, and A-Lok fittings.

Caps

Cap for Tubing

Caps for tubing have a nut and a sleeve so you can close off the end of your tubing in place of a fitting.

For Tube				For Tubing
OD	Wall Thick.	Material	Max. Pressure		Each
10mm	1mm	Brass	1,160 psi @ 72° F	5272K895	00000

Front and Back Sleeves

		Front Sleeve		Back Sleeve
For Tube OD	Sleeve Material	Lg.	No. Included	Lg.	No. Included	Max. Pressure		Each
10mm	Brass	5mm	1	3mm	1	1,160 psi @ 72° F	5272K913	00000

Sleeve and Nut Sets with Dispensers

Save time installing sleeves and nuts—these sets come oriented in the correct direction and order on a dispenser. To install them, slide off a set and place it on your tubing. Each set includes a front sleeve, a back sleeve, and a nut. The sleeves are also known as ferrules.

		Front Sleeve		Back Sleeve		Nut
For Tube OD	Material	Lg.	No. Included	Lg.	No. Included	Lg.	No. Included	Max. Pressure		Each
10mm	Brass	5mm	5	3mm	5	15mm	5	1,450 psi @ 72° F	7544N24	000000

Tube Supports

Barbed

For Tube		Tube Support
OD	ID	Style	Material	Max. Pressure		Each
10mm	8mm	Barbed	Brass	1,450 psi @ 72° F	7888N26	00000

Compression Fittings for Steel Tubing

For Use With: Inch: Air, Hydraulic Fluid, Water
Metric: Hydraulic Fluid
Tubing: Inch: Use with welded steel
Metric: Use with seamless steel
Specifications Met: Inch: SAE J514
Metric: ISO 8434, DIN 2353

A single sleeve (ferrule) bites into tubing as you tighten the nut, creating a strong seal. The nut and sleeve are included. Fittings are also known as flareless and bite fittings.

Zinc-plated steel fittings have fair corrosion resistance.

ISO 8434 (formerly DIN 2353) fittings meet international standards for tube fitting pressures.

Caps

Temperature Range: See table

For Tube
OD	Wall Thick.	Material	Max. Pressure	Temp. Range, °F		Each
10mm	Not Rated	Zinc-Plated Steel	3,600 psi @ 72° F	-20° to 230°	5269K74	00000

Plug and Cap Assortments

Temperature Range: -20° to 230° F

Number of Pieces	Includes	Material	Max. Pressure		Each
72	Plug for 6 mm OD Tubing (4 each) Plug for 8 mm OD Tubing (4 each) Plug for 10 mm OD Tubing (6 each) Plug for 12 mm OD Tubing (6 each) Plug for 15 mm OD Tubing (6 each) Plug for 18 mm OD Tubing (4 each) Plug for 22 mm OD Tubing (4 each) Plug for 28 mm OD Tubing (2 each) Cap for 6 mm OD Tubing (4 each) Cap for 8 mm OD Tubing (4 each) Cap for 10 mm OD Tubing (6 each) Cap for 12 mm OD Tubing (6 each) Cap for 15 mm OD Tubing (6 each) Cap for 18 mm OD Tubing (4 each) Cap for 22 mm OD Tubing (4 each) Cap for 28 mm OD Tubing (2 each) Metal Box	Zinc-Plated Steel	2,300 psi @ 72° F	5269K606	0000000

High-Pressure Compression Fittings for Steel Tubing

For Use With: Hydraulic Fluid
Specifications Met: DIN 2353, ISO 8434

Thicker walls make these fittings—sometimes called flareless or bite fittings—withstand about twice as much pressure as standard compression fittings, so they’re good for hydraulic power applications. Their single sleeve, or ferrule, bites into tubing as you tighten the nut, creating a seal that is leak tight even at high heat. The nut and sleeve are included. All meet ISO 8434 (formerly DIN 2353), which is an international standard for tube fitting pressures.

Caps

Temperature Range: -75° to 750° F
Tubing: Use with seamless steel

For Tube OD, mm	Material	Maximum Pressure		Each
10	Steel	11,600 psi @ 72° F	3793N164	00000

Nuts

Temperature Range: -75° to 750° F
Tubing: Use with seamless steel

For Tube OD, mm	Nut Material	Maximum Pressure		Each
10	Steel	11,600 psi @ 72° F	3969N13	00000

Sleeves

Temperature Range: -75° to 750° F
Tubing: Use with seamless steel

For Tube OD, mm	Sleeve Material	Maximum Pressure		Each
10	Steel	11,600 psi @ 72° F	3779N13	00000

Yor-Lok Fittings for Steel Tubing

For Use With: Air, Cutting Oil, Diesel Fuel, Fuel Oil, Gasoline, Hydraulic Fluid, Mineral Oil
Tubing: Use with seamless steel
Specifications Met: See table

A nut with two sleeves (ferrules) gives these fittings extra gripping power. The sleeves bite into tubing as you tighten the nut, creating a strong seal. Also known as instrumentation fittings, they are made to tight tolerances for use in high-precision applications. Fittings are zinc-plated steel for fair corrosion resistance. They are compatible with Swagelok®, Let-Lok, and A-Lok fittings.

Caps

Cap for Tubing

Cap for Fitting

Caps for tubing have a nut and a sleeve so you can close off the end of your tubing in place of a fitting. Caps for fittings replace the nut and sleeve of an existing fitting.

For Tube
OD	Wall Thick.	Material	Max. Pressure	Temp. Range, °F	Specifications Met		Each
Caps For Tubing
10mm	1mm	Zinc-Plated Steel	3,300 psi @ 72° F	-20° to 800°	ASME B31.3	4292N384	00000
Caps For Fitting
10mm	1mm	Zinc-Plated Steel	3,300 psi @ 72° F	-20° to 800°	ASME B31.3	4292N393	0000

Nuts

For Tube
OD	Wall Thick.	Nut Material	Max. Pressure	Temp. Range, °F	Specifications Met		Each
10mm	1mm	Zinc-Plated Steel	3,300 psi @ 72° F	-20° to 800°	ASME B31.3	4292N129	00000

Front and Back Sleeves

For Tube
OD	Wall Thick.	Front Sleeve Material	Back Sleeve Material	Max. Pressure	Temp. Range, °F	Specifications Met		Each
10mm	1mm	Zinc-Plated Steel	316 Stainless Steel	3,300 psi @ 72° F	-20° to 800°	ASME B31.3	4292N116	00000

Push-to-Connect Tube Fittings for Air

Temperature Range: 0° to 170° F, except polybutylene plastic fittings are 32° to 140° F
Tubing: Use with firm (Durometer 95A-45D) polyethylene plastic or polyurethane rubber
Specifications Met: ISO 14743, except cartridges and polybutylene plastic fittings

Insert tubing into these fittings and an internal gripping ring and O-ring hold the tubing tight. They are also known as instant fittings. To disconnect, push on the release ring and pull the tubing out of the fitting. Fittings have good corrosion resistance. Use them in low-pressure applications.

Identification rings (sold separately) snap over the release ring so you can color-code your lines.

Clips (sold separately) align and organize your tubing and fittings.

Caps

Caps fit over a tube stem end of a fitting or a piece of tubing.

For Tube OD	Material	Color	Release Ring Color	Max. Pressure		Each
10mm	Nylon Plastic	Black	Black	290 psi @ 72° F	5225K234	00000

Identification Rings

				Each
For Tube OD	Material	Choose a Color		1-19	20-99	100-Up
10mm	Nylon Plastic	Blue, Green, Red, White, Yellow	5779K811	00000	00000	00000

Brass Compression Tube Fittings for Air and Water

For Use With: Air, Lubricated Air, Water
Temperature Range: See table
Tubing: Use with firm or hard (Durometer 1A-95A or Rockwell 15T 1-15T 60) nylon plastic, polyethylene plastic, polypropylene plastic or polyurethane rubber
Specifications Met: SAE J512, except metric sizes

A single sleeve (ferrule) compresses the tubing as you tighten the nut, creating a strong seal. The nut and sleeve are included. Fittings are also known as flareless fittings. They are brass for good corrosion resistance.

Plugs

Install plugs on the end of fittings to block the flow of air or water.

For Tube, mm
OD	Wall Thick.	Material	Max. Pressure	Temp. Range, °F		Each
10	1	Brass	1300 psi @ 72° F	-75° to 550°	3868N352	00000

Tube Supports For Use With Air and Lubricated Air

Temperature Range:
Inch: -65° to 250° F
Metric: -40° to 250° F
Tubing:
Tube supports with 135 psi @ 75° F or 165 psi @ 75° F max. pressures: Use with firm or soft polyethylene plastic or PVC plastic
Tube supports with all other max. pressures: Use with firm or soft (Durometer 1A-95A) polyethylene plastic or polypropylene plastic

For Tube
OD	ID	Tube Support Material	Max Pressure	Pkg. Qty.		Pkg.
10mm	7mm	Brass	1080 psi @ 72° F	5	50915K637	00000
10mm	7.5mm	Brass	1080 psi @ 72° F	5	50915K638	00000

Tube Supports For Use With Air, Lubricated Air, and Water

Temperature Range: -75° to 550° F
Tubing: Use with hard or firm (Rockwell 15T 1-15T 60) nylon plastic, polyethylene plastic, polypropylene plastic, or polyurethane rubber

For Tube
OD	ID	Tube Support Material	Max Pressure		Each
10mm	8mm	Brass	1300 psi @ 72° F	3868N392	00000

Nuts

Short

For Use With:
Short nuts: Air, Water, Lubricated Air
Long nuts: Air, Water, Cutting Oil, Fuel Oil, Hydraulic Fluid, Mineral Oil
Temperature Range: See table
Tubing:
Short nuts: Use with firm or hard (Durometer 1A-95A or Rockwell 15T 1-15T 60) nylon plastic, polyethylene plastic, polypropylene plastic, or polyurethane rubber
Long nuts: Use with firm or hard (Durometer 1A-95A) copper, nylon plastic, polyethylene plastic, polypropylene plastic, or polyurethane rubber
Specifications Met: See table

For Tube
OD	Wall Thick.	Nut Material	Max. Pressure	Temp. Range, °F		Each
Short Nuts
10mm	1mm	Brass	1300 psi @ 72° F	-75° to 550°	3868N372	00000

Sleeves

For Use With:
UL Listed sleeves: Air, Water, Cutting Oil, Fuel Oil, Hydraulic Fluid, Mineral Oil
All other sleeves: Air, Water, Lubricated Air
Temperature Range: See table
Tubing:
UL Listed sleeves: Use with firm or hard (Durometer 1A-95A) copper, nylon plastic, polyethylene plastic, polypropylene plastic, or polyurethane rubber
All other sleeves: Use with firm or hard (Durometer 1A-95A or Rockwell 15T 1-15T 60) nylon plastic, polyethylene plastic, polypropylene plastic, or polyurethane rubber
Specifications Met: See table

For Tube		Sleeve
OD	Wall Thick.	Material	Max. Pressure	Temp. Range, °F		Each
10mm	1mm	Brass	1300 psi @ 72° F	-75° to 550°	3868N382	00000

Push-to-Connect Tube Fittings for Hot Drinking Water

Temperature Range: 35° to 200° F
Tubing: Use with hard polyethylene plastic
Specifications Met: NSF/ANSI 51, NSF/ANSI 61

Run hot water through these fittings at temperatures up to 200° F. Also known as instant fittings, they connect to tubing with a push, and an internal gripping ring and O-ring hold the tubing tight. To disconnect, push on the release ring and pull the tubing out of the fitting. Fittings are nylon for excellent impact and abrasion resistance.

Caps

Caps fit over a tube stem end of a fitting or a piece of tubing.

For Tube OD	Material	Color	Release Ring Color	Max. Pressure		Each
10mm	Nylon Plastic	White	Gray	190 psi @ 72° F	7852T661	00000