Color-code your lines by snapping these rings over the release ring on push-to-connect fittings.

Made of nickel-plated brass, these tube fittings resist corrosion better than plain brass fittings. The male threaded ends connect to NPT, NPTF, BSPP, BSPT, and other universal threads, so you don’t have to bother matching exact thread types.

Often used in outdoor, damp, and washdown environments, these 316 stainless steel fittings will not corrode from water, salt, or chemicals. The male threaded ends mate with NPT, NPTF, BSPT, BSPP, and other universal threads, so you won’t have to worry about matching exact threads when you’re on the job.

A 316 stainless steel body gives these fittings the best corrosion resistance of all our metal push-to-connect tube fittings.

The threads on these fittings mate with NPT, NPTF, BSPT, and BSPP threads.

Use at pressures up to 150 psi.

Designed for use in welding applications, these fittings are flame retardant.

Create a push-to-connect junction in equipment with these fittings. To install, drill a stepped hole in your surface, push the fitting components into place, then insert your tubing.

Tube supports slip inside tubing to prevent the walls from collapsing.

Use these sleeves with brass compression nuts and fittings to create a seal on plastic and rubber tubing.

Also known as instant fittings, they connect to tubing with a push, and an internal gripping ring and O-ring hold the tubing tight. Use in applications up to 150 psi.

Also known as instant fittings, these chemical-resistant plastic fittings connect to tubing with a push. An internal gripping ring holds the tubing tight.

These fittings keep their strength in moist environments and meet NSF/ANSI 61 for drinking water. Also known as instant fittings.

Also known as instant fittings, they connect to tubing with a push, and an internal gripping ring and O-ring hold the tubing tight. Use in applications up to 140 psi.

Use these nuts with compression sleeves and fittings to create a strong seal on stainless steel tubing.

Pair these nuts with vibration-resistant compression sleeves and fittings for a strong seal on stainless steel tubing.

When used with high-pressure compression fittings and nuts, these sleeves bite into stainless steel tubing to form a strong seal.

Create a strong seal on copper tubing when you couple these nuts with compression sleeves and fittings.